Dear Audi Driver,
Overview of system
This quick reference guide can be used to easily find information about operating the Navigation System and the integrated multi-media functions. An example for operating each of the functions is included. The menu structure shows which options are available for each of the functions.
The system enables you to quickly and easily operate the electronic features of your vehicle from a central control console. The following functions can be operated on correspondingly equipped vehicles:
However, this quick reference guide is not meant to replace the Operating Instructions, since there you can find more detailed information and notes about operating the system. AUDI AG
p
RADIO
p
CD/TV (CD, MP3 and TV)
p
NAME (Directory)
p
TEL (Telephone)
p
NAV (Navigation)
p
INFO (Traffic information)
p
CAR (Hardware and software version information)
p
SETUP (System settings)
Audi Navigation System plus (RNS-E) Quick reference guide
Switching system on and off Switching on and off automatically
Function selector buttons Selecting the main functions
The system switches on automatically when the ignition is switched on. The system also switches off automatically when the ignition key is removed. Control buttons
Switching on and off manually If required, you can switch the system on manually by briefly pressing the rotary pushbutton. To switch the system off manually press and hold the rotary pushbutton. If the system has been switched off manually, it will not switch on again automatically when the ignition is switched on. Volume adjustment
Activating the submenus in the corners of the display Rotary pushbutton Turn to select an option/ push to confirm
Turn the button to adjust the volume as desired. RETURN button Go back one level
Page 1
1 Switching system on and off · Overview of system · Operating the system
Operating the system
RADIO
RADIO
Example: How to store a new station.
menu structure FW MW LM
1. Press the RADIO Radio FM
Memory
Frequency
GALAXY Information
D-RADIO BAYERN 1 BAYERN 2
Culture
BAYERN 3
Pop
p
button.
Memory list
Memory
Classical
BAYERN 4
Tuning
function selector
Sound
TP TMC
p p p
Frequency Radio FM
Memory
Frequency
Balance Fader Treble Bass DSP Volume settings
Tuning
TP TMC
Sound
2. Turn the rotary pushRadio FM
Memory
Frequency
GALAXY Information
D-RADIO BAYERN 1 BAYERN 2
Culture
BAYERN 3
Pop
BAYERN 4
Classical
Tuning
button to mark the
p p p p p p
desired station. Press the pushbutton to
Sound
TP TMC
Tuning
confirm the selection.
Manual up Manual down Seek up Seek down Store station Scan
3. Press the control Radio FM
Memory
Frequency
button for ”Memory”.
Store station BAYERN 2 01: Bayern 1 02: 711 kHz
FM
MW
03: Bayern 3
FM
04: 207 kHz
LW
05: ---
Tuning
Sound Balance Fader Treble Bass DSP Volume settings for other functions (navigation information, traffic announcements and speech dialogue system)
Sound
TP TMC
SETUP Radio - main menu Press the SETUP button while in the RADIO function. The following options are available: 4. Press the rotary pushRadio FM
Memory
01: Bayern 1 02: 711 kHz
Frequency FM
button.
MW
03: Store BAYERN 2 here 04: 207 kHz
LW
05: Bayern 3
FM
06: ---
Tuning
Sound
TP TMC
p p p p p p p p
Traffic programme Regional stations Station reception Station display Alternative frequency PTY filter Delete last stations Delete stored stations
5. Turn the rotary push01: Bayern 1 02: 711 kHz
Frequency FM MW
04: 207 kHz
LW
05: Bayern 3
FM
TP TMC
Tip:
Press the pushbutton
06: ---
Tuning
button to select a position for storing.
03: Store BAYERN 2 here
Sound
to confirm the position.
Press the arrow buttons to switch to the previous/next station.
1 RADIO
Radio FM
Memory
Page 2
CD/TV
CD/MP3/TV
Example: How to select an MP3 track.
menu structure
1. Press the CD/TV function CD 1
Changer
Source
Track 01
selector button.
p
Teletext page selection
Teletext (TV)
Track 02 Track 03
00:08
p p p p p p p
Track 04 Track 05 Track 06
CD control
Sound
TP TMC
2. Press the control button for MP3 Card1
Drive
Source
CD
”Source”.
TV
MP3 ctrl
Sound
TP TMC
Drive (MP3) p p p p
MP3
CD Navigation DVD CD Audio Memory card 1 Memory card 2 CD-ROM Unreadable Empty
Audio-CD CD-ROM Unreadable Empty
CD MP3 TV
Changer (CD)
Source (CD/MP3/TV) MP3 Card1
Drive
Source
CD MP3 TV
3. Turn the rotary pushbutton MP3 Card1
Source
to mark MP3. Press the selection.
MP3 ctrl
Sound
TP TMC
4. If applicable, press control button ”Drive” to select Card 1 or Card 2.
5. Turn the rotary pushbutton Drive
MP3 Card1
Source
a night at the roxb ABBA - Dancing ... ABBA - Super Tro...
Abba Teens - Dancin Abba Teens - Ma... TP TMC
Sound
p p p p p p p
Forward Rewind Next Previous Shuffle Scan Name (Details) 1)
TV control
Press the pushbutton to
p p p p
confirm the selection.
00:08
Sound
TP TMC
Sound (CD/MP3/TV)
CD/MP3 control
to mark the desired track.
ABBA - Waterloo....
MP3 ctrl
MP3 ctrl
pushbutton to confirm the
TV
Manual up Manual down Search up Search down
Balance Fader Treble Bass DSP Volume settings for other functions (navigation information, traffic announcements and speech dialogue system)
p p p p p p
SETUP CD/MP3/TV - main menu Press the SETUP button while in the CD/MP3/TV function. The following options are available: CD system p
Repeat CD
MP3 function Tip: Press the arrow buttons to select the previous/next track (CD/MP3 mode) or the previous/ next channel (TV mode).
p p p p 1)
Page 3
Repeat With subdirectories Track display Genre display MP3 function.
TV p p p p p p
Screen Videosource TV Norm AV Norm Teletext settings Default settings
5 NAME · TEL · Speech control system1
CD MP3
1 CD/MP3/TV
Drive
NAME (Directory)
TEL (Telephone)
Example: How to add a new entry to the directory. 1. Press the NAME function selector Directory Find entry
Which telephone functions are available depends on the equipment installed in your vehicle. A corresponding message will appear in the display when you press the TEL function selector button.
button.
View list New entry Delete directory
TP TMC
2. Turn the rotary pushbutton to Directory Find entry View list
mark the option ”New entry”. Press the pushbutton to confirm
New entry
Speech control system
Delete directory
the selection.
The speech control function makes it easier to use the telephone while you are driving.
TP TMC
- Press the talk button
e.
- After the beep, give e.g. one of the commands listed in the table below. Please refer to your Owner's Manual for a complete list of possible commands.
3. Press the rotary pushbutton. Directory New entry Salutation
2 1
First name Middle name Surname
Multi-function steering wheel
Title TP TMC
1 CD/MP3/TV
5 NAME · TEL · Speech control system1
Volume adjustment You can adjust the telephone volume by turning the thumbwheel multi-function steering wheel.
4. Turn and press the rotary pushDirectory Surname AUD
r on the
button to select and confirm the Commands
characters.
Function System announces and displays the commands which are currently available.
TP TMC
You can enter the PIN code for the SIM card.
Specify the number you want to dial in a clear voice.
The number for an entry stored in the phone book will be dialled.
The last telephone number will be dialled again.
Specify a name and telephone number for a new entry.
You can delete an entry from the speech control phone book.
All entries stored in the speech control phone book will be read out.
You can delete the entire speech control phone book.
5. Turn the pushbutton to OK and Directory Surname
press to confirm the entry.
AUDI SERVICE
6. All other fields can be filled out as described. TP TMC
Note: You must first enter a surname for the new entry in the directory. The entries are stored automatically. If an entry in the directory is stored with an address, you can load the address into the navigation by following the path NavigationRMemoryRLoad from directory.
Page 4
Note: If your vehicle is equipped with the speech dialogue system please refer to the Operating Instructions for further information.
Multi-function steering wheel
Loading media
The multi-function steering wheel enables fast and simple control of selected functions of the system.
There is a DVD drive and two MP3 media slots located behind the display. Press button e to open and close the display.
2
1
2
3
4
4
3 Button/ Operation Thumbwheel
Function
Press thumbwheel once/ twice
To start/stop station search, forwards
Press thumbwheel
To make, answer or end a call
Press and hold thumbwheel
Fast forward (CD or MP3); to reject an incoming call
1
Loading the navigation DVD
To select next station/track of Scroll down with current audio/video source; thumbwheel to scroll down in the phone book To select previous station/track of current audio/video source; to scroll up in the phone book
Press button
To switch from audio/video mode to telephone mode
Press button
Activating and deactivating the speech control system/speech dialogue system
Scroll up with thumbwheel
To increase volume
Scroll down with To reduce volume thumbwheel To repeat last voice guidance cue
5 Multi-function steering wheel
Press thumbwheel
Audi Navigationssystem plus (RNS-E) englisch 5.07
Ejecting the navigation DVD
5 Loading media · Map display · NAV · INFO · SETUP · System reset
Scroll up with thumbwheel
Insert the navigation DVD into the slot r as illustrated with the lettering facing upwards. It will be drawn into the slot automatically. You can also play audio CDs and MP3 CDs using the DVD drive.
281.562.730.20
Page 5
Press button
u with the display opened. Inserting an MP3 memory card Insert the memory card into one of the slots t until it engages. The side with the lettering must face upwards and the missing corner must be at the front. Removing an MP3 memory card To release the memory card, briefly press the card and then remove it from the slot.
© 2007 AUDI AG AUDI AG reserves the right to alter any part of the vehicle, its equipment and technical specifications. No legal commitment can be implied by the information, illustrations or descriptions in this publication. No part of this publication may be reprinted, reproduced or translated without the written permission of AUDI AG. All rights under the laws of copyright are expressly reserved by AUDI AG. Subject to alteration and amendment. Printed in Germany. Concept and layout: Pfriemer GmbH.
Map display
NAV (Navigation)
Up to three alternative routes will be offered when you are using the route without stopover mode.
Example: How to enter a destination and start the route guidance.
1. Press the NAV function
Turn the rotary pushbutton to mark Navigation
Memory
the desired route. Press the push-
Country
Route
Germany
selector button.
Town/Zip
button to confirm the selection.
2. Turn the rotary pushbutton to
Street
Special destination
mark the option ”Town/ZIP”.
Start route guidance
Nav-Info
Map
TP TMC
Press the pushbutton to confirm the selection.
When using the route with stopover mode the system will display an overview of the route showing the destination and up to 3 stopovers.
3. Turn and press the rotary Navigation
Memory
K
Press the rotary pushbutton to confirm the route suggestion.
L
J I H G F E D C B
MN
OP QR
S
U V W X Y Z Ä Ö Ü
S A
DEL
Route
Town/Zip INGOL
confirm the characters.
INGOLDINGEN INGOLSTADT
4. When OK appears in the dis-
0..9
4
LIST
Nav-Info
pushbutton to select and
T
Map
TP TMC
play, press the rotary pushbutton to confirm the entry. 5. You can turn/press the rotary pushbutton to select and confirm a town displayed in the list.
Symbol Information Start position
6. Turn the rotary pushbutton to Navigation
Memory
Destination and stopover location
Route
Town: INGOLSTADT Centre (end entry)
Route with motorway section (incl. distance)
mark the option ”Street”. Press the pushbutton to
Street POI in town
confirm the selection. Repeat
Enter destination on map
Route with toll road (incl. distance) Nav-Info
Map
TP TMC
Route with ferry connection
the procedure as described above.
Route with car train Season-restricted road section Time-restricted road section
7. Turn the rotary pushbutton Navigation
Memory
Distance to destination and estimated arrival time (updated continually)
Route
Street: SCHLÜTERSTRASSE End entry
to mark the option ”Centre (end entry)”. Press the
Intersection House number
pushbutton to confirm the
Enter destination on map
Map orientation Nav-Info
Map
TP TMC
Map scale
You can select and activate/deactivate various settings for the map depiction. Changing the map depiction: Press the SETUP button. Turn the
8. Turn the rotary pushbutton Navigation
Memory
Country
Germany
Town/Zip
INGOLSTADT
Street
SCHLÜTERSTRASSE
Special
rotary pushbutton and mark the desired option. Press the pushbutton to confirm the selection.
Page 6
selection.
Route
route guidance”. Press the
AUDI ZENTRUM IN...
pushbutton to confirm the
destination Start route guidance
Nav-Info
to mark the option ”Start
TP TMC
Map
selection.
NAV (Navigation)
INFO (Traffic information)
INFO (Traffic information)
menu structure
Example: How to call up TMC traffic reports.
menu structure
p p p p p p p
1. Press the INFO function
Last destinations Top categories Load from directory Store in directory Load route Store route Delete route
Info
TP memo A7
Ulm
A9
München
A9
München
Source
Würzburg
p
selector button.
List of recorded traffic reports
Preferred TMC station
Traffic jam, end of queue...
Route with/without stopover Route list Route criteria Avoid route from here
TP memo
Nürnberg
Traffic jam
Source
Nürnberg
Info
TP memo
Road works, traffic jam TP TMC
A7
Ulm
A9
München
Source
Würzburg
Traffic jam, end of queue...
Nürnberg
Traffic jam A9
München
Nürnberg
Road works, traffic jam
Memory
Route Navigation
Memory
TP TMC
Route
2. Displaying detailed
Route with stopover
Info
TP memo
Route list Route criteria
A7
Ulm
A9
München
Source
Würzburg
Traffic jam, end of queue...
Avoid route from here
Nürnberg
information for traffic report: Turn the rotary
SETUP Info - main menu
pushbutton to mark
Press the SETUP button while in the INFO function. The following options are available:
Traffic jam A9
Nav-Info
TP TMC
Nav-Info p p
p p p p
Position data (incl. street and/or town) Longitude/latitude coordinates of current position Satellites received Destination and stopover data Estimated time of arrival Distance
München
Map
Road works, traffic jam
Zoom Map legend menu
report. Press the pushp p
button to confirm the selection. 3. Displaying additional Info
TP memo
1/14
Press the SETUP button while in the navigation function. The following options are available:
p p p p p p p p p p
Source
Bayern 3 15:49
a blind spot.
traffic reports: Turn the rotary pushbutton to
Accident, left lane is blocked.
mark the option ”Show
Show next TMC message Show on map
next TMC message”.
TP TMC
Press the pushbutton to confirm the selection. 4. Displaying on map: Info
TP memo
1/14
Map colours (day/night) Orientation Map type Voice guidance (navigation directions) Map contents Delete last destinations Turn list Motorway info Intersection map Automatic intersection zoom Compass Version information Demo mode Set position/direction
the desired traffic
TP TMC
Map
SETUP Navigation - main menu
p p p p
Nürnberg
Source
Bayern 3 15:49
a blind spot.
Turn the rotary pushbutton to mark
Accident, left lane is blocked.
the option ”Show on
Show next TMC message Show on map
map”. Press the
TP TMC
pushbutton to confirm the selection.
Page 7
p p
TP memo timer TMC announcement
SETUP (System settings)
SETUP (System settings)
Example: How to set a different menu language.
menu structure
You can only change this setting when the vehicle is stationary. Menu language Distance unit (can be selected when language is set to English) Time setting Default settings Speech dialogue system Delete user data
1. Press the SETUP Setup Radio Traffic programme
Settings
off
Regional stations
on
Sensitivity
local
Station display
variable
Alt. frequency
on
button while in any of the main
PTY filter
Display
function selector
TP TMC
Sound
Setup
Settings
functions.
Settings
2. Press the Menu language Distance unit
km
Setup
control button
Menu language Distance unit
for ”Settings”.
Time setting
Default settings
Delete user data
Delete user data Sound
TP TMC
Display
Display p p
Switch off display Brightness
3. Press the rotary Setup
Settings
Menu language Distance unit
pushbutton.
km
Time setting Default settings Delete user data
Display
km
Time setting
Default settings
Display
Settings
TP TMC
Sound
Setup
Settings
4. Turn the rotary Language Deutsch
TP TMC
Sound
Sound Balance Fader Treble Bass DSP Volume settings for other functions (navigation information, traffic announcements and speech dialogue system)
pushbutton to mark the desired
English Français
language. Press
Italiano Espanol
Display
TP TMC
Sound
the pushbutton to confirm the selection.
System reset Should the navigation system no longer respond to the controls, you must carry out a system reset (reboot). Switch off the navigation system using the ON/OFF button. Then press and hold the ON/OFF button until the start screen disappears again in the display. After a few seconds the system will reboot itself. Once this process is completed the navigation system will be ready for use again.
Page 8
p p p p p p