AUCTION PRECISION MACHINE SHOP

Featuring CNC Vertical Machining Centers; CNC Vertical Milling Machines; CNC Lathes; Vertical Mills; Engine Lathes; Surface Grinders; Saws; Welding Equip.; Precision Machine Accessories; Q.C. Equip.; Raw Material; Forklifts; Vans; Air Compressors; More

6 200

CNC

HURCO MDL. VMX64-50T VERTICAL MACHINING CENTER

CNC HAAS MDL. SL-20T CNC LATHE

AUCTION: AUTOMATION TECHNOLOGY, INC. WEDNESDAY 4420 Ridge Drive Northeast MAY 1 SALEM, OREGON 97301 (See Directions on Back Page) 10:00 A.M. At the Premises of

BUYER’S PREMIUM: 13% ONSITE • 16% WEBCAST Read Partial Terms and Conditions on Back Page of Brochure

< SHARP VERTICAL TURRET MILLING MACHINE

3

AVA IL

INSPECTION: Tuesday, April, 30, 9:00 A.M. to 4:00 P.M. & Morning of Sale

ABL E

> OKAMOTO 6" X 18" HAND FEED SURFACE GRINDER

SABER (COSEN) AUTOMATIC HORIZONTAL BANDSAW

On-Site Bidding in Salem, Oregon or Bid Via Webcast at Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043

Sale Conducted By:

Bob Braman • Ron Moore

HOUSTON • DALLAS • ST. LOUIS

PHONE: (713) 691-4401

FAX: (713) 672-7905

E-MAIL: [email protected] WEBSITE: www.pmi-auction.com

6 200

CNC

HURCO MDL. VMX64-50T VERTICAL MACHINING CENTER

CNC VERTICAL MACHINING CENTERS

HURCO MDL. VMX-64-50T, new 2006, Hurco “Ultimax 4” CNC control, 66" x 35" table, 6,000 lb. table load, 64" X, 34" Y, 30" Z axis travels, CAT-50 spndl. taper, 8,000 RPM, 30 HP spndl. drive motor, 32 tool ATC, thru-spndl. coolant system, Barnes chip separator, S/N M653-06002106EHA. HAAS MDL. VF-4, Haas CNC Control, 52" x 18" table, 3,500 lb. table load, 50" x, 20" Y, 25" Z axis travels, CAT40 spndl. taper, spds.: 0–7,500 RPM, 15 HP spndl. drive motor, 20 tool ATC, P-cool, chip conveyor, S/N 9610. HURCO MDL. BMC-40, Hurco “Ultimax” CNC control, 51.7" x 27/6" table, 3,300 lb. table load, 40" X, 30" Y, 22" Z axis travels, CAT-40 spndl. taper, spds.: 30–4,000 RPM, 15 HP spndl. drive motor, 30 tool ATC, S/N DDS002118H. HAAS MDL. VF-0E, Haas CNC Control, 36" x 14" table, 1,300 lb. table load, 30" x, 16" Y, 20" Z axis travels, CAT40 spndl. taper, 15,000 RPM, 15 HP spndl. drive motor, 20 tool ATC, P-cool, chip conveyor, S/N 10346. (2) HAAS MDL. VF-2, Haas CNC Control, 36" x 14" table, 1,300 lb. table load, 30" x, 16" Y, 20" Z axis travels, CAT-40 spndl. taper, 10,000 RPM, 15 HP spndl. drive motor, 20 tool ATC, P-cool, S/N 5940, S/N 3002.

CNC HAAS MDL. VF-0E VERTICAL MACHINING CENTER

CNC HAAS MDL. VF-4 VERTICAL MACHINING CENTER

CNC VERTICAL MILLING MACHINES HURCO MDL. KM3P, Hurco “Ultimax” CNC control, 49" x 14" table, 750 lb. table load, 24" X, 14" Y, 5" Z axis travels, Kwik-Switch spndl. taper, spds.: 60–4,500 RPM, 3 HP spndl. drive motor, S/N KDD-9002062A.

AUCTION: WEDNESDAY MAY 1 • 10:00 A.M.

SHARP CNC TRAK A.G.E.2, 2-axis CNC control, 14" x 54" table, 35" X, 16.3" Y axis travels. 5" quill travel, spds.: 60–4,500 RPM, 3 HP spndl. drive motor, one-shot lube, S/N 85050765.

VERTICAL TURRET MILLING MACHINES (2) BRIDGEPORT SERIES I, 9" x 42" table, 2 HP drive motor, D.R.O. system, pwr. feed, S/N 203796, S/N 192333. (3) SHARP, 14" x 54" table, 2 HP drive motor, 4,500 RPM, D.R.O. system, pwr. feed, S/N 51023161, S/N 84060584, S/N 84010531. SUPERMAX, 10" x 50" table, 2 HP drive motor, D.R.O. system, pwr. feed, S/N T8109231.

CNC HURCO BMC-40 VERTICAL MACHINING CENTER

CNC HAAS MDL. VF-2 VERTICAL MACHINING CENTER

CNC

CNC

HAAS MDL. SL-20T CNC LATHE

CINCINNATI MILACRON AVENGER 200T CNC LATHE

CNC LATHES

HAAS MDL. SL-20T, Haas CNC control, 23" swing over bed, 10.3" turning dia., 24" btn. centers, 3" spndl. hole, 2" bar. cap., spds.: 50–4,000 RPM, 20 HP spndl. drive motor, 10 pos. vertical turret, 8" hyd. chuck, tool presetter, chip conveyor, S/N 62972. CINCINNATI MILACRON “AVENGER 200T”, Acramatic 850 CNC control, 23.54" swing over bed, 10.55" swing over carriage, 2" bar cap., 5,000 RPM, 20 HP spndl. drive motor, 12 pos. vertical turret, hyd. collet chuck, Econodyne 12’ bar feed, tool presetter, parts catcher, S/N 3650AOT93-0068.

LATHES

COLCHESTER 15" X 50", 15" swing over bed, 9.75" swing over crosslide, 2" spndl. hole, 4,500 RPM variable speed drive, 15 HP, inch/metric threading, Newall D.R.O., S/N VT-0624-748. COLCHESTER 13" X 40", 13.75" swing, 7.75" swing over crosslide, 1.75" spndl. hole, 4,500 RPM variable speed drive, 10 HP, inch/metric threading, Newall D.R.O., collet closer, S/N VM-05065-0546. HARDINGE MDL. DSM-59 HAND SCREW MACHINE, 9" swing over bed, 1-1/16" collet cap., spds.: 230–3,500 RPM, bed turret, lever crosslide, S/N DV59-19408.

OKAMOTO 6" X 18" HAND FEED SURFACE GRINDER

SURFACE GRINDERS

OKAMOTO 6" X 18" LINEAR HAND FEED, perm. magnetic chuck, 1 HP direct drive spndl., 2-axis D.R.O., fine cross and down feeds, S/N 4823. CHEVALIER 6" X 18" HAND FEED, Mdl. FSG-618, perm. magnetic chuck, 1 HP direct drive spndl., S/N 62B-4277.

SAWS

SABER (COSEN) MDL. AH-300H AUTOMATIC HORIZONTAL BANDSAW, 1-1/4" blade size, 11.81" rd. cap., 11.81" x 13.38" rectangular cap., 5 HP blade drive, 16" auto. feed index, S/N H941332. KALAMAZOO MDL. H9AW HORIZONTAL BANDSAW, 9" x 13" cap., 1" blade size, 2 HP, S/N H9AWV15776. DAKE JOHNSON MDL. V-24 VERTICAL BANDSAW, blade spds.: 50–,4250 FPM, 26" tilting table, scroll cutting attach., blade welder, S/N NA. SCOTCHMAN MDL. CPO-350N COLD SAW, 14" blade size, power downfeed, S/N NA. > COLCHESTER 15" X 50" ENGINE LATHE

INSPECTION: Tuesday April, 30 9:00 A.M. to 4:00 P.M. & Morning of Sale

VIEW OF VERTICAL TURRET MILLING MACHINES

HARDINGE MDL. DSM-50 HAND SCREW  MACHINE

CHEVALIER 6" X 18" HAND FEED SURFACE GRINDER

SABER (COSEN) AUTOMATIC HORIZONTAL BANDSAW

WELDING EQUIPMENT

MILLER SYNCROWAVE 250 TIG WELDER, 250 amps @ 34 v., 40% duty cycle, cooler unit, TIG torch, foot pedal control, S/N KF765747.

> DAKE JOHNSON V-24 VERTICAL  BANDSAW

MILLER “MILLERMATIC 250” INTEGRATED MIG WELDER, 250 amps @ 28 v., 40% duty cycle, MIG gun, running gear, S/N KH395095. THERMAL DYNAMICS “CUTMASTER 81” PORTABLE PLASMA CUTTER, 1" max. cut thickness, torch, S/N 03707765. WELDING TABLE, CLAMPS, VISES,AND ASSORTED ACCESSORIES.

MACHINE SHOP ACCESSORIES

WIDE ASSORTMENT OF HIGH QUALITY MACHINE SHOP ITEMS INCLUDING: KURT “ANGLELOK” MILLING VISES; ROTARY TABLES; DIVIDING HEAD; ANGLE PLATES; SINE TABLE; CHUCKS; CAT-40 AND CAT-50 TOOLHOLDERS; R-8 TOOLHOLDERS; BENCH VISES; PEDESTAL AND BENCH GRINDERS; PRECISION DRILL GRINDER; DOUBLE END CARBIDE GRINDER.

ASSORTED WELDING MACHINERY

SCOTCHMAN COLD SAW

HIGH QUALITY MACHINE SHOP ACCESSORIES

TESA 24" DIGITAL HEIGHT GAGE

MICRO-VU OPTICAL COMPARATOR

ASSORTED PRECISION INSTRUMENTS

QUALITY CONTROL EQUIPMENT

TESA 24" DIGITAL HEIGHT GAGE; 36" X 48" GRANITE SURFACE PLATE; 14" MICRO-VU OPTICAL COMPARATOR; 12" MITUTOYO DIGITAL HEIGHTMASTER; GAGE BLOCKS AND PIN GAGES; MICROMETERS; CALIPERS; PRECISION VEE BLOCKS; PRECISION ANGLE PLATES; DIGITAL HEIGHT GAGE; 123 BLOCKS, AND MUCH, MUCH MORE! ASSORTED CAT-40 TOOL HOLDERS

PLASTIC FABRICATION AREA HARDWARE AND STORAGE SHELVES

PLASTIC FABRICATION AREA

COMPLETE PLASTIC FABRICATION AREA INCLUDING CUTTING AND WELDING EQUIPMENT, LAYOUT TABLES, FITTINGS AND HARDWARE, ROLLER CARTS, JIGS AND FIXTURES, HAND 7 POWER TOOLS, AND MUCH, MUCH MORE!

RAW MATERIALS

HUGE ASSORTMENT OF RAW MATERIALS INCLUDING: ALUMINUM, STEEL, STAINLESS STEEL AND ALLOY BARS, SHAPES, TUBES AND FLATS IN ASSORTED SIZES, SHEET STOCK, WIDE ASSORTMENT OF FASTENERS AND FITTINGS, AND MUCH, MUCH MORE!

MATERIAL HANDLING EQUIPMENT

LARGE CANTILEVER SHEET STORAGE RACK, ADJUSTABLE PALLET RACKS, SHELVING, ROLLER DRAWER CABINETS, CARTS, TABLES, STOOLS AND CHAIRS, WORKBENCHES, AND MUCH, MUCH MORE!

AUCTION: WEDNESDAY MAY 1 10:00 A.M. INSPECTION: Tuesday, April, 30, 9:00 A.M. to 4:00 P.M. & Morning of Sale

FORKLIFTS

TOYOTA 4,500 LB. CAP. MDL. 42-4FGC25, LP pwrd., cushion tires, 185" max. lift, S/N 404FGC25 17G89. TOYOTA 2,000 LB. CAP.MDL.02-FGC10, LP pwrd., cushion tires, 146" max. lift, S/N 02-FGC10 1014.

> HUGE ASSORTMENT OF RAW MATERIALS

VEHICLES

DODGE “SPRINTER” PANEL VAN, new 2007, Odo: 96,000 miles, 170" wheelbase, 3L V-6 diesel engine, auto. trans., VIN WDOPEY45175201702. CHEVROLET “ASTRO” MINIVAN, new 2000, VIN GNDM19W41B120996.

AIR COMPRESSORS

QUINCY MDL. F20-P TANK MOUNTED ROTARY SCREW TYPE, 20 HP drive motor, 73 SCFM @ 125 PSIG rated output, 120 gal. receiver tank, S/N 9603760. CHAMPION MDL. V10-12 TANK MOUNTED RECIPROCATING TYPE, 15 HP drive motor, vertical receiver tank, S/N R30-34859. < QUINCY 20 HP ROTARY SCREW AIR COMPRESSOR

TOYOTA 4,500 LB. LPG FORKLIFT

> CHAMPION 15 HP VERTICAL TANK MOUNTED AIR COMPRESSOR

DODGE SPRINTER CARGO VAN

PUBLIC INVITED P.O. Box 19100 Houston, TX 77224-9100

AUCTION: WED., MAY 1 • 10:00 A.M.

DATED MATERIAL – PLEASE DELIVER

PRECISION MACHINE SHOP

Featuring CNC Vertical Machining Centers; CNC Vertical Milling Machines; CNC Lathes; Vertical Mills; Engine Lathes; Surface Grinders; Saws; Welding Equip.; Precision Machine Accessories; Q.C. Equip.; Raw Material; Forklifts; Vans; Air Compressors; More

ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER

Presorted First Class Mail U.S. Postage PAID Eugene, Oregon Permit No. 17

AUCTION SALEM, OREGON

DIRECTIONS

FROM THE PORTLAND INT'L AIRPORT: Follow the signs out of the airport to I-205 S toward Portland/Salem. Go approx. 24 miles and merge onto I-5 S towards Salem. Go approx. 29 miles to Exit 260A. Merge onto Salem Pkwy./OR-99E BR and proceed approx. 1-1/2 miles. Turn left onto Hyacinth St. NE. Turn left onto Salem Industrial Dr. NE. Turn left on Claxter Rd. NE. Take the first right onto Ridge Dr. NE and proceed to auction site on the right, 4420 Ridge Dr. NE, Salem, OR 97301. Watch for auction signs.

LODGING

DAYS INN SALEM............................................ (877) 633 -1798 1600 Motor Court Northeast, Salem, OR RED LION HOTEL SALEM............................... (503) 370-6305 3301 Market Street NE, Salem, OR SUPER 8 SALEM............................................. (503) 370-8927 1288 Hawthorne NE, Salem, OR

UNABLE TO ATTEND? Bid on-line in real time at TO PARTICIPATE YOU MUST: 1. Register at www.BidSpotter.com. DO IT NOW. 2. Either wire transfer, or mail a cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100 If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401

FINANCE YOUR AUCTION PURCHASE

Conserve Your Cash & Increase Your Bidding Power AuctionLea$e Provides M&E Financing With Approvals from $5,000 to $999,000 (800) 438-1470 Apply Online: www.AuctionLease.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

PLANT & MACHINERY INC. APPRAISAL DIVISION

If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO A 16% BUYER’S PREMIUM.

Confidential Industrial Machinery & Equipment Appraisals Call 1-800-282-8466

PARTIAL TERMS & CONDITIONS A 13% Buyer’s Premium Will Apply On-site. A 16% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation. Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises. ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC. Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until June 3, 2013. In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale. Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser. The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase. QS-0016791

Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER. The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items. Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance. These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.