CURRICULUM VITAE Dr. Mohammad Reza Pirestani 2012

I. PERSONAL INFORMATION: Name:

Mohammad Reza Pirestani

Date of Birth:

July 16, 1971

Place of Birth:

Isfahan, Iran

Marital Status: Employment

Married

Status:

Assistant Professor in Hydraulic Structures Engineering Dept. of Civil Engineering, IAU - South Tehran Branch, 45m Ahang St.,

Address:

Aboozar Blvd., Tehran, Iran

Tel. (work):

+98 21 33722831

Cell Phone:

+989123752768 [email protected]

E-mail:

[email protected]

Web Site:

www.azad.ac.ir/FACULTY/Dr.Pirestanii_profile.htm

II. EDUCATIONAL RECORDS: Degree

Institution

Field

Date Place

B.Sc.

Isfahan University of Technology (IUT)

Water Engineering

1994

Iran

M.Sc.

IAU-Science and Research Campus

Hydraulic Structures Engineering

1997

Iran

Ph. D

IAU-Science and Research Campus

Hydraulic Structures Engineering

2004

Iran

Title of M. Sc. Thesis: “Investigation of Meander Rivers Migration by Physical Modeling” Title of Ph. D Thesis: “Investigation of Flow Pattern and Scouring in the vicinity of Lateral Intakes in the Bend Channel”

III. ACADEMIC EXPERIENCES: Faculty Member, Department of Civil Engineering, IAU -South Tehran Branch (Since 1998).

IV. MEMBERSHIP OF SCIENTIFIC SOCIETIES: 1. Member of Iranian Hydraulic Association and representative of IHA in IAU-South Tehran Branch . 2. Member of Young Researchers Club in IAU. 3. Office manager of International and Science Cooperation in IAU-South Tehran Branch (from 2006 - 2009). 4. Secretary of Publishing Meeting in IAU - South Tehran Branch (2006 – 2009). 5. Director in chief of “Journal of Water Sciences Researches” (JWSR), http://azad.ac.ir/Journals/jwsr . 6. Head of Hydraulic Structures Engineering Department (M.Sc. Degree).

V. RESEARCH INTERESTS:

1. River Engineering : a) Diversion Flow with Different Conditions. b) Sediment Transport Engineering and its Controlling. c) Scouring in the vicinity of Different Groynes, Bridge Piers, Falling Jet from Culverts, Spillway or Gates, Submerge Vanes and Intakes. d) Investigation of River Morphology e) River Training Techniques. 2. Hydraulic Structures. 3. Experimental Models. 4. Hydro informatics. 5. Hydrodynamics.

VI. PUBLICATIONS  Book: 1. A First Course in Genetic Algorithm, 2006, IAU – South Tehran Branch, Tehran, Iran. 

PAPERS: 1. Experimental Study of Hydraulic Parameters effective on Change of Meandering Ghezel Ozan River, The Conference of River Engineering, 1999, Chamran Unversity, Ahvaz, Iran. 2. Determination of Regime Relationship on Width and Depth of Stability in Alluvial Sefidrood River, 2cd National Conference of Hydraulic, 1999, Elm o Sanat University, Tehran, Iran. 3. An Investigation of Sediment Transport in Tidal Rivers: A Case Study in Bahmanshir River, The 4th International Conference on Coasts, Ports & Marine Structures ICOPMAS, November 20-23, 2000, Shahid Rajaee Port Complex, Bandar Abbass, Iran. 4. Experimental Study of Hydraulic Parameters effective on Change of Bed Channel along of a Meandering Model with Sand Bed, The 3rd National Conference of Hydraulic, 2001, Tehran University, Tehran, Iran. 5. Experimental study of flow pattern in U-shape bend channel, The 9th International Symposium on River Sedimentation (9th ISRS) Yichang, China, October 18-21, 2004. 6. Investigation of dividing streamline in lateral intake of U-shape channels, 2005, The 31st IAHR Congress, South Korea. 7. Investigation of velocity variation in U-shape channels by physical modeling, 2005, The 2nd International Yellow River Forum (IYRF), Zhengzhou, China. 8. Experimental Investigation of Hydraulic Parameters on Separation Zone in Lateral Intake at the Bend Channels, 2005, The 5th National Conference of Hydraulic, Kerman University, Kerman, Iran. 9. Experimental Investigation of Flow in Lateral Intakes in Curved Channels, Journal of IranWater Resource Research, Vol.2, No.2, 2006. 10. Experimental Investigation of Flow Pattern in Lateral Intake with Intake Location of 115º, The 7th International Conference of Civil Engineering, 8-10 May 2006, Tarbiat Modaress University, Tehran Iran. 11. Experimental Analyzed of Flow in U-Shape Bend Channels, The 7th River Engineering Conference, Shahid Chamran University, February 13-15, 2007, Ahvaz, Iran. 12. Experimental Investigation of Velocity Variation in the Vicinity of Lateral Intakes in Bend Channels, The 7th River Engineering Conference, Shahid Chamran University, February 13-15, 2007, Ahvaz, Iran. 13. Experimental Study of Scouring in the vicinity of Lateral Intake in U-Shape Channels, November 1-3, 2006, The 3rd International Conference on Scour and Erosion (ICSE), Amsterdam, The Netherlands. 14. Investigation of Flow Pattern and Scouring in Lateral Intake of Bend Channels, June 6th-8th 2007, The 2nd International Conference on Managing Rivers in the 21st Century: Solutions Towards Sustainable River Basins, Kuching – Malaysia. 15. Physical Modeling The Flow in Lateral Intake in Curved Channels, The 10th International Symposium on River Sedimentation (10th ISRS), August 1-4, 2007, Moscow, Russia. 16. Investigation of Shear Stress in the Vicinity of Lateral Intake in the bend Channels, 2007, The 6th National Conference of Hydraulic, Shahrekord University, Shahrekord, Iran. 17. Flow analysis on lateral intake at the bend channels, Journal of Water and Soil, Vol. 22, No. 2, 2008, Ferdowsi University of Mashhad. 18. Investigation of Super Elevation and Radial Flow near Lateral Intake in the Bend Channel, The 4th National Congress on Civil Engineering, Tehran University, 2008.

19. The 3D Numerical Simulation of Scour Hole by Free Falling Jet for Compare of (DOT) Equation, International Conference of River flow, Turkey, 2008. 20. Numerical Simulation of Scour Hole by Free Falling Jet, The 4th National Congress on Civil Engineering, Tehran University, 2008. 21. Numerical Simulation of effectiveness angle of Sediment friction on dimensions of scour hole by free falling jet, The 2nd National Conference on Dam & Hydropower, Tehran, 2008. 22. Experimental Investigation of walls convergence in settling Basin(II) on efficiency of Hydraulic Jump, The 2nd National Conference on Dam & Hydropower, Tehran, 2008. 23. Investigation of Flow Pattern in the vicinity of Lateral Intake at the U-Shape Bend Channels, Advance in Hydro-Science and Engineering , The 8th International Conference on HydroScience and Engineering, Nagoya, Japan, September 9-12, 2008. 24. Investigation of Effect Hydraulic-Geometric Parameters on Rate of Scouring in the Vicinity Lateral Intake in the Bend Channel, The 7th Iranian Hydraulic Conference, Power and Water University of Technology, Tehran, Iran, 11-13 Nov. 2008. 25. Investigation of Flow Strength Variations in the Bend (U) Shape Channel, The 7th Iranian Hydraulic Conference, Power and Water University of Technology, Tehran, Iran, 11-13 Nov. 2008. 26. Experimental Investigation of effect Hydraulic Parameters on Energy Dissipater in settling Basin with walls convergence, The 7th Iranian Hydraulic Conference, Power and Water University of Technology, Tehran, Iran, 11-13 Nov. 2008. 27. Experimental Investigation of Hydraulic – Geometric Parameters effect on Scouring of Down Stream by Falling Jet, The 8th International Congress on Civil Engineering, Shiraz University, Shiraz, Iran, May 11-13, 2009. 28. Using PSO Algorithm for economic optimization on Water Diversion System in Dam building, The 8th International Congress on Civil Engineering, Shiraz University, Shiraz, Iran, May 1113, 2009. 29. Numerical Simulation oHydraulic Parameters effect on flow pattern in lateral intake in the bend channels, The 8th International Congress on Civil Engineering, Shiraz University, Shiraz, Iran, May 11-13, 2009. 30. Numerical Simulation of Scour Depth Evolution around Bridge Piers under Unsteady Flow Condition, The 33rd IAHR. Congress: Water Engineering for a Sustainable Environment, University of British Colombia, Vancouver, Canada, ISBN: 978-94-90365-01-1, October, 2009. 31. Investigation of Dams on Environmental Impact, Quarterly Journal of Human Geography, No.3, Summer 2009. 32. Numerical Simulation of Effective Submerge Vanes on Secondary Flow Entrance of Lateral Intake in the Bend Channels, Journal of Water and Soil Conservation, No.3, 2010. 33. Experimental Investigation of Depth of Plunge Pool on Dimension of Scour Hole by Free Falling Jet from Flip Bucket with baffle, The 8th Iranian Hydraulic Conference, Tehran University, Tehran, Iran, 2009. 34. Investigation of sensitivity of Hydraulic Equations on Bed Load by River Discharge, The 8th International Conference of River Engineering, Ahvaz University, Iran, February 2010. 35. Estimate of Flow Velocity during Huge Floods by Threshold of Movement Sediment Transport Equations, The 8th International Conference of River Engineering, Ahvaz University, Iran, February 2010. 36. Optimization of Head Loss Coefficient in the Channels by Shuffled Algorithm, The 10th National Conference of Irrigation and Evaporation, Kerman, Iran, February 2010. 37. Experimental Study on Maximum Scour Hole by Falling Jet With Different Shape of Culvert, The 8th International Conference of River Engineering, Ahvaz University, Iran, February 2010. 38. Numerical Simulation of Flow and Sediment Transport in the Channel by SSIIM, The 2nd

National Conference on Water, March 2010. 39. Numerical Simulation of Flow Pattern around the Bridge Pier in the Curve Channel by Fluent, The National Conference on Water and Soil, Deputy of Research, IAU – Dezfoul Branch, March 2010. 40. Laboratory Study of Flow Strength and Momentum Variations in the Vicinity of Lateral Intakes in the Bend Channels, European Congress of The IAHR, Heriot – Watt University, Edinburgh, 4th -6th May 2010. 41. Sensitivity analysis of hydraulic bed load equation to water velocity and bed material size, The 11th International Symposium on River Sedimentation, Stellenbosch, South Africa, 6th-9th September 2010. 42. Investigation of energy dissipation on step spillway of edge by FLUENT, the 9th Iranian Hydraulic Conference, Tarbiat Modares University, Tehran, Iran, 9th-11th November 2010. 43. Simulation of Bank’s Conservation with T Shape Groyne by DELF3D Model, the 1st Iranian Water Resource Management in the Seashore, Sari University, Sari, Iran, 8th-9th December 2010. 44. Numerical Simulation of Bed Profile Variations in a Series L Shape, the 1st Iranian Water Resource Management in the Seashore, Sari University, Sari, Iran, 8th-9th December 2010. 45. Investigation of Flow Effect on Scour Dimension by Free Falling Jet with dental Flip Bucket Slipway. The Second National Civil Engineering, Khomeini Shahr University, February 2011. 46. Time Development of local Scour in downstream of submerged circle culvert, The Second National Civil Engineering, Khomeini Shahr University, February 2011. 47. Experimental Investigation of Falling Jet Angle in Culvert on Dimension of Scour Hole with Fixed Depth Falling, The 6th National Congress on Civil Engineering, Semnan, Iran, 26-27 April 2011. 48. Environmental Assessment (Biologic Condition) Due to Kineh Vars Dam Structure by Phases Logic, The Second National Conference on Iranian Water Resources Applied Researches, Zanjan, Iran, 18-20 May 2011. 49. Experimental Study of Tail Water Effective on Down Stream of Slant Submerged Jet in Different Time Steps, the 4th Iran Water Resources Management Conference, Amir Kabir University, Tehran, Iran, 3-4 May 2011. 50. Experimental Modeling of Discharge Effective on Dimension of Scour Hole by Falling Flow from Flip Bucket with Gate Controlling, the 4th Iran Water Resources Management Conference, Amir Kabir University, Tehran, Iran, 3-4 May 2011. 51. The Presentation of Experimental Relationship to Get the Effect of Hydraulic – Geometric Parameters on Dimension of Scour Hole by Falling Flow from Solid and Slotted Flip Bucket, the 4th Iran Water Resources Management Conference, Amir Kabir University, Tehran, Iran, 34 May 2011. 52. Experimental Study on Variation of Bed Shear Stress in (U) Shape Bend Channel to Predict Probable Zone of Scouring, the 4th Iran Water Resources Management Conference, Amir Kabir University, Tehran, Iran, 3-4 May 2011. 53. Assessment of the Environmental Destructive Effects of Building Dams, the ICEME 2011: International Conference on Environmental Management and Engineering (WASET), Paris, France, August 24-26, 2011. 54. Evaluation of Optimum Performance of Lateral Intakes, the ICEME 2011: International Conference on Environmental Management and Engineering (WASET), Paris, France, August 24-26, 2011. 55. Effect of Gate Operation on Scour Hole Due to Free Falling Flow from Ski Jump Flip Bucket in two cases of Normal and Slot, 10th Iranian Hydraulic Conference, University of Guilan, Rasht, Iran, November 8-10, 2011. 56. Comparison of Scouring Dimension Due to Free Falling and Submerged jets with Angle, 10th

Iranian Hydraulic Conference, University of Guilan, Rasht, Iran, November 8-10, 2011. 57. Numerical Simulation on Maximum Depth of Scour Hole in the vicinity of (L) Shape Groyne by SSIIM, the First International Conference on Dams & Hydropowers, Tehran, Iran, February 8-9, 2012. 58. Effect of Crossing Structures on Flood Area by HEC-RAS model (Case Study Kakasharaf River), 3rd National Civil engineering, Khomeini-Shahr, Iran, February 21-22, 2012. 59. Experimental Modeling of Scour Hole Variety Due to Falling Jets on Flip Bucket Spillway with vertical Gate, 9th International Congress on Civil Engineeing, Isfahan University of Technology (IUT), Isfahan, Iran, May 8-10, 2012. 60. Numerical Simulation on Maximum Depth of Scour Hole in the vicinity of (L) Shape Groyne with different Discharge by SSIIM, Isfahan University of Technology (IUT), Isfahan, Iran, May 8-10, 2012. 61. Numerical Model of Flow Field and Sedimentation patterns in a Rectangular Settling Basin, Isfahan University of Technology (IUT), Isfahan, Iran, May 8-10, 2012. 62. Effect of Convergent Walls on Energy Dissipation in Stilling Basin by Physical Modeling, International Journal of Thermal and Fluid Sciences, 2012, ISSN 2225-3556, http://scialert.net/onlinefirst.php?issn=2225-3556. 63. Simulation of Mechanistic Model for Soil Development in Masuleh West of Alborz_Iran, World Applied Sciences Journal (WASJ), ISI, Scopus-Ref & DOAJ indexed journal, http://www.idosi.org/wasj/wasj.htm. 64. Numerical Simulation of Skewed Slot Effect on Local Scour Reduction, Journal of Water Sciences Research, ISSN: 2251-7405, eISSN: 2251-7413, Vol. 3, No. 1, Summer 2011, 69-80, http://journals.azad.ac.ir/JWSR/. 65. Numerical Simulation of Flow Field in two Different 90 Degree Bends with T-shaped Groyne by Using Delft-3D, Science Series Data Report Journal, vol.4 issue.5, May. 2012. ISI indexed Journal, http://www.ssdr.sciencerecord.com. VII. DIRECTION OF DISSERTATION/THESE: SUPERVISOR: 1- Moghbeli Oskooe, Ehsan, “The Mechanism of Energy Dissipation on Step Spillways by Physical Modeling”, IAU – Center Tehran Branch, Tehran, Iran, 2007, M. Sc. Thesis. 2- Moazenfar, J., “Effective Parameters on Flow Regime in Step Spillways”, IAU – Center Tehran Branch, Tehran, Iran, 2007, M. Sc. Thesis. 3- Mahdavizadeh A. H., “Investigation of Scouring Time Scale Down Stream of Jet by Physical Modeling”, IAU – South Tehran Branch, Tehran, Iran, 2007, M. Sc. Thesis. 4- Barkhodari, Neda, “Flow Analysis on Lateral Intake at the Bend Channels (For Diversion Angle=60 and Intake Location=40, 75 and 115”, IAU – South Tehran Branch, Tehran, Iran, 2007, M. Sc. Thesis. 5- Amir Aslani, Shahrokh, “Numerical Simulation of Scour Hole by Free Falling Jet”, IAU – South Tehran Branch, Tehran, Iran, 2008, M. Sc. Thesis. 6- Akbari Taeme, R., “The Optimization of Pipe Diameter on Water Supply Systems by Genetic Algorithm”, IAU – Center Tehran Branch, Tehran, Iran, 2008, M. Sc. Thesis. 7- Daneshmandi, Amir Hossein, “Scouring Analysis in the vicinity of Lateral Intake in the bend Channels”, IAU – South Tehran Branch, Tehran, Iran, 2008, M. Sc. Thesis. 8- Hayati, R., “Analysis on Hydraulic Parameters in Among of Suspended Load Transport in Kan River”, IAU – Center Tehran Branch, Tehran, Iran, 2008, M. Sc. Thesis. 9- Hosseinnejad, S. Zeynab, “Application of Artificial Neural Networks in Prediction of Scour Hole by Falling Jet at Culvert Outlets”, IAU – South Tehran Branch, Tehran, Iran, 2009, M. Sc. Thesis.

10- Shafie, Sajad, “Experimental Investigation of Hydraulic-Geometric Parameters on Scour hole by Free Falling Jet from Flip Bucket”, IAU – South Tehran Branch, Tehran, Iran, 2009, M. Sc. Thesis. 11- Divani, Shima, “Estimation effect of Cross-Hydraulic structures on Flood Plane Width in Seasonal Rivers (Case Study Shoor River)”, IAU – South Tehran Branch, Tehran, Iran, 2009, M. Sc. Thesis. 12- Amir Ahmadian, Sepideh, “Assessment of Hydraulic-Geometric Parameters on Water Structures of Channel in the Condition of Unsteady flow”, IAU – South Tehran Branch, Tehran, Iran, 2010, M. Sc. Thesis. 13- Mir Moazen, S. Sajad, “Numerical Simulation of Hydraulic-Geometric Parameters on amount of Sedimentation in Water channel (Case Study Sangar Channel)”, IAU – South Tehran Branch, Tehran, Iran, 2010, M. Sc. Thesis. 14- Beiranvand, Pooya, “Numerical Simulation of Flow Pattern in the Vicinity of Bridge Pier in the Curve Channel”, IAU – South Tehran Branch, Tehran, Iran, 2010, M. Sc. Thesis. 15- Sadat Mousavi Anari, S. Ali, “Numerical Simulation on Flow Pattern in the vicinity of (T) Shape Groyne in the Channels”, IAU – South Tehran Branch, Tehran, Iran, 2011, M. Sc. Thesis. 16- Rezazadeh, Mehdi, “Simulation of Hydraulic-Geometric Parameters effects on Variations of Bed Topography Due to Submerged Jets by Physical modeling”, IAU – South Tehran Branch, Tehran, Iran, 2011, M. Sc. Thesis. 17- Riazi, Rasool, “Experimental Modeling on Variations of Scour Hole Due to Falling Jet by Flip Bucket with Gate”, IAU – South Tehran Branch, Tehran, Iran, 2011, M. Sc. Thesis. 18- Jazayeri, Pegah, “Evaluation of Optimum Performance of Lateral Intakes”, IAU – South Tehran Branch, Tehran, Iran, 2011, M. Sc. Thesis. 19- Masoumi, Mahineh, “Numerical Simulation of Flowpattern in the Vicinity of (L) Shape groyne Series”, IAU – South Tehran Branch, Tehran, Iran, 2012, M. Sc. Thesis. 20- Mousavi, Azadeh, “Effect of Cross-Hydraulic structures on Flood Plane Width by Hec-Ras (Case Study Kakasharaf River)”, IAU – South Tehran Branch, Tehran, Iran, 2012, M. Sc. Thesis. ADVISOR: 1- Pournasiri, M., “Investigation of Velocity Variation in the the Bend Channels”, Power and Water University of Technology, Tehran, Iran, 2006, M. Sc. Thesis. 2- Azimi Bolourian, A.M., “Analysis of the submerged lateral jet with weakly spatter”, IAU – Center Tehran Branch, Tehran, Iran, 2007, M. Sc. Thesis. 3- Ghobadi, F., “Dissection of Dimensions and Hydraulic Parameters in Stilling Basin (II) by Physical modeling”, IAU – South Tehran Branch, Tehran, Iran, 2007, M. Sc. Thesis. 4- Kefayati, Maryam, 2008. “Assesment of hydraulic methods in estimating sediment load of rivers, (Case study Dough river)”. IAU – South Tehran Branch, Tehran, Iran, M. Sc. Thesis. 5- Halalat Naseriani, Hossein, “Investigation of Jet Geometric on Scouring hole by Physical Modeling”, IAU – Central Tehran Branch, Tehran, Iran, 2006, M. Sc. Thesis. 6- Sedighzadeh S., “Presentation a New Model for Optimization Water Diversion System in Dams”, IAU – South Tehran Branch, Tehran, Iran, 2008, M. Sc. Thesis. 7- Barati, S., “Analysis on Hydraulic Parameters in Among of Bed Load Transport in Kan River”, IAU – Center Tehran Branch, Tehran, Iran, 2008, M. Sc. Thesis. 8- Heidari, Akoo, “Investigation of Flow Diffusion in Lateral Jet by LES Method”, IAU – Center Tehran Branch, Tehran, Iran, 2008, M. Sc. Thesis. 9- Golabi, M. H., “Assessment of Flood Discharge for Design of Hydraulic Structures by Sediment Transport Hydraulic Equations”, IAU – South Tehran Branch, Tehran, Iran,

September, 2009, M. Sc. Thesis. 10- Motahari, A., “Investigation of Effective Parameters on Scouring in the Vicinity of Bridge Piers by Dimension Analysis”, IAU – Center Tehran Branch, Tehran, Iran, 2009, M. Sc. Thesis. 11- Ilanlo, Mernoush, “Using of Precipitation-Runoff Models in estimation of Discharge Desgin in Hydraulic Structures”, IAU – Center Tehran Branch, Tehran, Iran, 2009, M. Sc. Thesis. 12- Masoomi, Hossein, “Estimate of Sediment Transport in the Rivers by Satellite Images”, IAU – Center Tehran Branch, Tehran, Iran, 2009, M. Sc. Thesis. 13- Soltan Mohamadi, Masoumeh, “Investigatin and Assessment Sediment income to the Minab Dam Reservoir by SWAT”, IAU – Center Tehran Branch, Tehran, Iran, 2009, M. Sc. Thesis. 14- Ameri Haji Khajoo, Yousef, “assessment of processing sediment transport to reservoirs (Case study Alavian dam)”, IAU – South Tehran Branch, Tehran, Iran, 2010, M.Sc. Thesis. 15- Kamran Disfani, Ramin, 2010, “Estimating Flood Design of Hydraulic Structures Using Neural Networks”. IAU – South Tehran Branch, Tehran, Iran, M. Sc. Thesis. 16- Homauon Nia, Abdelah, “Environmental Assessment Due to Dam Structures (Case Study: Kineh Varse Dam), IAU – South Tehran Branch, Tehran, Iran, 2011, M.Sc. Thesis. 17- Shiari, Shiva, “Study on Variations of Flood Plain due to Dam Break”, IAU – South Tehran Branch, Tehran, Iran, 2011, M.Sc. Thesis. 18- Saberi, Abbas, “Flood Zoning and the Effect of Bridge Structure on Zoning by HEC-RAS Software (Case study: Dough River)”. IAU – South Tehran Branch, Tehran, Iran, 2012, M. Sc. Thesis. 19- Oghbaei, Azam, “Simulation and Estimation of Sediment with Applicability of SWAT Model in Dam Reservoirs”. IAU – South Tehran Branch, Tehran, Iran, 2012, M. Sc. Thesis. 20- Ahmadi, Mona, “Water Discharge and Sediment Modeling in Reservoirs Using HEC-RAS”. IAU – South Tehran Branch, Tehran, Iran, 2012, M. Sc. Thesis. 21- Alimohammadi, Saeedeh, “To Determine of Optimum Parameters on Settling Basin by Numerical Simulation of Flow”. IAU – South Tehran Branch, Tehran, Iran, 2012, M. Sc. Thesis. 22VIII. TEACHING EXPERIENCE: A: Basic Science Level 1. Fluid Mechanics 2. Hydraulic 3. Physical and Hydraulic Models 4. Water Distribution Systems 5. Hydrology 6. Principles of Dam Engineering 7. Static B: Masters Level 1. Advance Physical and Hydraulic Models 2. River Engineering 3. Design of Hydraulic Structures

IX. RESEARCH PROJECTS:

1. 2. 3. 4.

Investigation of effective parameters on meandering rivers by physical modeling (1995-96). Study on River morphology in Ghezel Ozan River (1997-98). Study on regime equations on Sefid Rood River (1999). Investigation of Hydraulic parameters on 7 ephemeral streams of Gonabad Zone in Khorasan state by HEC-RAS software (2000-2001) 5. River training technics on rivers with Design of Groin , Dike and Levee. 6. Design of physical modeling on Hendigan Diversion Dam. 7. Design of physical modeling on Hamidieh Diversion Dam. 8. Study on effective parameters Lateral intake in the bend channel. 9. Investigation of effective parameters on Scouring Down Stream of Free Jet by Physical Modeling and Numerical modeling by Flow3D Software. 10. Study on effectiveness gradually fluming wall for energy dissipater on settling basin by physical modeling. 11. Scouring in the Hydraulic Structures (Seminar Course of Ph. D), 2001. 12. Study on Effect of Hydraulic and Geometric on Scour Hole by Jet, 2010. 13. The Modeling of Effective Hydraulic and Geometric Parameters in the Vicinity of (L) and (T) Shape Groynes, 2012. 14. The Modeling of Scour Hole Variations Due to Falling Flow from Spillway with Flip Bucket, 2011, (to be continue). X. CONFERENCES & SEMINARS (For Presentation of Paper): 1. Conference of River Engineering, 1999, Chamran University, Ahvaz, Iran. 2. The 2cd National Conference of Hydraulic, 1999, Elm O Sanat University, Tehran, Iran. 3. The 4th International Conference on Coasts, Ports & Marine Structures ICOPMAS, 20-23 Nov 2000, Shahid Rajaee Port Complex, Bandar Abbass, Iran. 4. The 3rd National Conference of Hydraulic, 2001, Tehran University, Tehran, Iran. 5. The 2nd International Yellow River Forum (IYRF), 2005, Zhengzhou, China. 6. The 5th National Conference of Hydraulic, Kerman University, 2005, Kerman, Iran. 7. The 7th International Conference of Civil Engineering, 8-10 May 2006, Tarbiat Modaress University, Tehran Iran. 8. The 3rd International Conference on Scour and Erosion (ICSE), November 1-3, 2006, Amsterdam, The Netherlands. 9. The 10th International Symposium on River Sedimentation (10th ISRS), August 1-4, 2007, Moscow, Russia. 10. The 7th Iranian Hydraulic Conference, Power and Water University of Technology, November 11-13. 2008, Tehran, Iran. 11. The 8th International Congress on Civil Engineering, Shiraz University, May 11-13. 2009, Shiraz, Iran. 12. European Congress of The IAHR, Heriot – Watt University, Edinburgh, 4th -6th May 2010. 13. International Conference on Environmental Management and Engineering, Paris, France, August 24-26, 2011.

XI. CERTIFICATES (Training Course and Workshop):

1- Training Course of Introduction of Statistics, (2007), IAU, Tehran, Iran. 2- Training Course Use of Ms.Excel Software in Engineering, (2007), IAU, Tehran, Iran. 3- River Engineering Workshop, 23 November 2008, University of Water and Power Technology, Tehran, Iran. 4- 19th Session of the “IHP Nagoya Training Course in Asia and the Pacific Region” on “Water Resources and Water-Related Disasters under Climate Change-Prediction, Impact Assessment and Adaptation”, 29 November to 12 December 2009, Kyoto University, Japan. XII. OTHERS(Awards, ...): 1- Expert of Department of River Engineering in Research Center of Soil and Watershed Management (1995-96). 2- Expert of Department of River Engineering in Water Resource Research Center (1996-99). 3- Member of Scientific Committee in The 7th Iranian Hydraulic Conference, Power and Water University of Technology, Tehran, Iran, 11-13 November 2008. 4- Member of Scientific Committee in The 9th Iranian Hydraulic Conference, Tarbiat Modares University, Tehran, Iran, 9th-11th November 2010. 5- Member of Scientific Committee in The 10th Iranian Hydraulic Conference, Guilan University, Rasht, Iran, 8th-10th November 2011. 6- Scientific co-operation with other Universities in Iran. 7- Scientific Supervisor of Water Supply Projects in Tehran Province.