All on magnetic equipment

tic e n g a m All on ipment equ ® Index Hand controlled magnetic lifters MaxX lifters MVS series p. 03 p. 03 Permanent-electro battery lifters Ba...
Author: Oliver Burns
2 downloads 2 Views 2MB Size
tic e n g a m All on ipment equ

®

Index Hand controlled magnetic lifters MaxX lifters MVS series

p. 03 p. 03

Permanent-electro battery lifters Bat-Grip 300

p. 04

Permanent-electro magnetic chucks KIT MDS 304 for Spark erosion KIT SQ 304 HD50 for milling

p. 04 p. 05

Permanent magnetic chucks PL/M MICROFINE pole pitch (1 + 0,5 mm) PL/F FINE pole pitch (3 + 1 mm) PL/FC round FINE pole pitch (3 + 1 mm) PL/RA RADIAL pole

p. 06 p. 06 p. 06 p. 07

Sinus tables TS/S* –single opening TS/D* –double opening

p. 07 p. 07

Magnetic prisms MV-7 MV-12 MV-10 MV-15 Laminar blocks LB1 LB2 LB3

p. 08 p. 08 p. 08 p. 08

p. 08 p. 08 p. 08

Dial gauge magnetic stands MB60 /M1 MB60 /S2 MB60 /M2 MB60 /M3 MB60 /SH MB60 /SF MB30 /M1 MB60 /FC

p. 09 p. 09 p. 09 p. 09 p. 09 p. 09 p. 09 p. 09

Permanent magnets AK – Pocket AH – Heavy AB – Button AP – Pot AS – Shallow pot AC – Round bar AR – Rectangular bar NC – Neodimium pot FC – Ferrite shallow pot MT – Magnetic tape

p. 10 p. 10 p. 10 p. 10 p. 10 p. 11 p. 11 p. 11 p. 11 p. 11

2

Magnetic squares MS1 MS2 MS3 MS4 MS4-A MS5 MS6

p. 12 p. 12 p. 12 p. 12 p. 12 p. 12 p. 12

Magnetic holder GM-A

p. 12

Magnetic flouters MF1 MF2 MF3 MF4 MF5

p. 13 p. 13 p. 13 p. 13 p. 13

Drilling machine with magnetic base TD50

p. 13

Demagnetisers DM/P Bench demagnetiser DM/T Tunnel - rectangular DM/C Tunnel – circular

p. 14 p. 14 p. 14

Magnetic separators MH

p. 14

Permanent magnets for industrial application AlNiCo Ferrite Rare earth

p. 15 p. 15 p. 15

Digital gaussmeter DG5060

p. 15

IM

Our 30 years experience is at your disposal to provide engineering assistance, selection suggestions and samples on a wide range of SINTERED ALNICO, FERRITE and RARE EARTH MAGNETS. We can offer various sizes and shapes to meet customer specific requirements with a short delivery time.

AlNiCo AlNiCo magnets are resistant to high temperatures and have fairly high energy products. As the name suggests, these magnets contain aluminium, nickel and cobalt. Cast Alnico can be made into shapes that may not be possible with other materials and sintered Alnico shows stronger mechanical characteristics.

Ferrite Ferrite magnets are the most popular magnets available today and are usually composed of either barium or strontium ferrite and iron oxide. These magnets display a high level of coercive force, which allows them to be more resistant to demagnetization.

Rare Earth Rare earth magnets are the most powerful permanent magnets available for commercial use. Generally available grades are samarium cobalt (SmCo) or neodymium iron boron (NdFeB). Rare earth materials offer energy products from 18 MGOe to over 50 MGOe, depending on material and grade.

For additional details and dedicated quotations, please provide us the following data: Size and tolerances

Max. temperature (Cº)

Type of magnetic material

Quantity

Holding power (kg)

Application description

DG www.allmag.net

®

Permanent magnets for industrial application

Digital gaussmeter This tool measures residual and induced magnetic fields, in a range between 0 to 20.000 gauss. Weight 0,45 kg.

Model DG 5060

Lenght 132

Dimensions (mm) Width Height 135 38

Probe thick. 2

15

DM

®

®

Hand controlled magnetic lifter

Demagnetisers

In few seconds it removes any eventual residual magnetism from the work-piece machined on a magnetic chuck.

A range of 5 models available with lifting capacity from 250 kg up to 2000 kg, safety factor 3.

BENCH DEMAGNETIZERS

Monoblock construction. Nickel coated. Maintenance free. Light weight, compact, powerful, reliable. Ideal for flat and round loads, finished or rough.

The best for demagnetising small ferrous pieces.

Model DM/P 1215 DM/P 1520 DM/P 1524 DM/P 2030

Dimensions (mm) Lenght Width 120 150 150 200 150 240 200 300

Model DM/T 1020 DM/T 1520 DM/T 1535 DM/T 2040 DM/T 2060 DM/T 3060 DM/T 4060

Light dimensions (mm) Height Width Consumption (W) 100 200 3000 150 200 4500 150 350 5000 200 400 5500 200 600 7000 300 600 9000 400 600 12000

Consumption (W) 90 180 220 440

Practical and easy-to-use for all the requirements of the modern mechanical industry.

TUNNEL DEMAGNETIZERS – RECTANGULAR High power equipment suitable to demagnetise medium size pieces, even in alloyed material.

TUNNEL DEMAGNETIZERS – CIRCULAR Same characteristics of the previous model, but with round light passage.

MH

Vertical loading system for flat components available for MaxX 250/500/1000.

Magnetic separators for hoppers

A

14

Light dimensions (mm) Diameter Consumption (W) 200 3500 300 4500 400 7000

MVS

C

B

Model DM/C 20 DM/C 30 DM/C 40

Magnetic grid in neodymium for dusts and grained materials separation. The permanent magnetic field stops ferrous magnetic elements from the others.

Model MH1 MH2 MH3 MH4

A 200 200 300 200

Dimensions (mm) B C 200 50 250 50 300 50 200 100

Model MaxX 250 MaxX 500 MaxX1000 MaxX1500 MaxX2000

Dimensions (mm) Lenght Width Height 189 185 79 249 235 101 342 316 131 383 457 171 457 457 171

Weight (kg) 6 15 34 66 80

Load plate Max (kg) 250 500 1000 1500 2000

Thickness min. (mm) 20 25 40 45 55

Load round Max (kg) 100 200 400 600 800

Diam. Max. (mm) 300 400 450 500 600

Force (kg) 750 1500 3000 4500 6000 3

®

Permanent-electro magnetic battery lifter The Mag and Demag cycles performed with radio control allow to a single operator to handle loads of any dimension and shape, without main power supply also in rather accessible areas.

MF

®

Magnetic floaters

Located on board of the steel sheet stack, the flouters induce magnetic flux into the sheets, rejecting each other. It becomes easy to quickly remove the upper sheet.

The load, held exclusively by permanent magnets power, doesn’t need any power supply during handling operation.

MF 1/2/3 MF 4/5

Model Bat-Grip 300

Dimensions (mm) Lenght Width Height 690 328 400

MDS

Weight (kg) 160

Load plate Max (kg) 3000

Thickness min.(mm) 25

Load round Max (kg) 700

Diam. Max.(mm) 200

Force kg 6000

MF 1/2/3

MF 4/5

TD

Permanent electro magnetic chuck for EDM “spark erosion” The permanent-electro magnetic chuck for EDM with electronic control unit is unaffected by main power breakdown, no electric energy is needed during machining operations. No overheat. Uniform clamping.

MDS 304

Technical characteristics Dimensions Weight (mm) (kg) 300x450 52

D DE LU C IN

Dimensions (mm) a b c 96 102 52 132 122 52 132 170 60 132 356 32 260 350 50

d 60 90 90 90 150

e 7 9 9 10 12

Weight (kg)

Thick. max

Stack

1,3 2,1 3,6 7,5 22

6 6 6 -

80 100 150 320 320

f

250 250

Drilling machines with magnetic base

TD 50 – Portable drilling machine with magnetic base. The electromagnetic base equipped with electronic monitoring and visual signalling system protects from machine separation from steel during drilling or cutting. Innovative frame construction increases rigidity, tool life and quality of holes.

Remote control with power regulation. Total demagnetization even with alloyed material. Monobloc construction associated with washing channels circuit. Perfect fluid proofing. High reliability.

Model SQ

Model MF1 MF2 MF3 MF4 MF5

Technical characteristics Power supply Motor Spindle Magnet force Magnet base dimensions Two speed drill motor Max drilling capacity Max milling capacity Arbor holder Max depth of cut Max height Min. height Length Width Weight

Thickness (mm) 54

Laminar blocks mod. LB1

1260 W, 110-240 VAC 1200W MT2 max 12000N 90 x 180 mm I: 210 rpm / II: 420 rpm 19 mm 50 mm 19,05 mm 50 mm 524 mm 433 mm 300 mm 265 mm 17 kg

AS OPTION

DU 16

Universal adapter for twist drill, MT2 tip, for drills up to 16mm diameter.

TD 50

4

13

MS

®

Magnetic squares

®

SUPER Permanent electro magnetic chuck SUPER QUAD for milling QUAD

For the corner positioning of ferrous round and flat pieces; ideal for welding and tracing operations.

Power and safety are the main characteristics of the innovative and patented Quadsystem permanent electro technology in use on permanent electro magnetic chuck with control unit. Best solution on milling machines and machining centre.

MS-1

• Quick, versatile and uniform clamping • 5 faces free for full machining in a single set up • No vibrations during machining operations • Reduced tools consumption • High stock removal • Better finishing and great accuracies

MS-2

• Easy installation on the machine • Practical use • Convenient and cost effective

MS-3 Monobloc construction. Great strength, long term reliability and maintenance free. AUTOMATIC SHIMMING SYSTEM - INCLUDED Composed of fixed pole extensions series (n.3 PFR 50/32) and mobile (n.13 PMQ 50/32), capable of adjusting itself to the workpiece to be clamped and to lock it firmly with no deformation. WORKPIECE

MS-4 Model MS-1 MS-2 MS-3 MS-4 MS-4A MS-5 MS-6

Dimensions (mm) Lenght Width Height 110 110 t16 85 50 t13 95 110 t16 140 37 140 105 36 105 225 20 225 300 35 300

GM

Angle Round min. Weight (kg) 13 0,6 10 0,3 13 0,5 90º 1,7 75º/60º/45º 1,5 90º 2 90º 4,6

MS-4A

WORKPIECE

MS-5

MS-6

Gripping magnet Gripping magnet Best for manual thin sheet handling.

B

A

Tables

h

Model GM-A

Load Max (kg) 50

Dimensions (mm) A B h 120 100 270

Weight (kg) 3

Model

Dimensions (mm) SQ 304 HD50 320x412

Vertical application

Technical characteristics Weight Poles Thickness (kg) n. (mm) 70 24 68

Force Tons. 8,5

GM-A 12

5

PL

®

Permanent chucks

PM

Brass and steel surface for maximum resistance and accuracy. Removable hexagonal key. Side stops. Permanent magnet circuit with high efficiency lifetime. Coolant and waterproof construction.

®

Permanent magnets BAR Cylindrical bar magnets in alnico alloy.

h

AC Micro pole serie

B

Model PL / M PL/M 1018 PL/M 1220 PL/M 1325 PL/M 1530 PL/M 1535 PL/M 1540 PL/M 1545 PL/M 2030 PL/M 2040 PL/M 2045 PL/M 2050 PL/M 2063 PL/M 2540 PL/M 2563

A

C

PL/M 0,5 mm

Best for grinding operations on small and thin components.

Model PM AC 10 AC 20 AC 25 AC 30

A

1,5 mm 0,5 mm

Dimensions (mm) A B C 105 180 45 120 200 45 130 250 45 150 300 45 150 350 45 150 400 45 150 450 45 200 300 45 200 400 45 200 450 45 200 500 50 200 630 52 250 400 50 250 630 52

Weight ~ kg 7 9 12 18 20 23 26 23 31 35 40 53 42 68

BAR Rectangular bar magnets in alnico alloy. h

AR A

Model PM AR 50 AR 75 AR 20 AR 40 AR 60 AR 65

Dimensions (mm) A h 4 10 5 20 8 24 10 30

A 15 15 10 12,5 12,5 15

Dimensions (mm) B 10 10 5 5 5 5

h 50 75 20 40 60 60

B

NEODIMIUM MAGNETS

POT Fine pole serie

B

Model PL / F PL/F 1220 PL/F 1325 PL/F 1530 PL/F 1535 PL/F 1540 PL/F 1545 PL/F 2030 PL/F 2035 PL/F 2040 PL/F 2045 PL/F 2050 PL/F 2063 PL/F 2540 PL/F 2563

A

C

PL/F Highest clamping force on small–medium components.

Bipolar magnets with high power and small dimensions.

1 mm 3 mm 1 mm

Dimensions (mm) A B C 120 200 45 130 250 45 150 300 45 150 350 45 150 400 45 150 450 45 200 300 45 200 350 45 200 400 45 200 450 45 200 500 50 200 630 52 250 400 50 250 630 52

Weight ~ kg 9 12 17 20 23 26 23 27 31 35 40 53 42 68

h

Model PM NC 127 NC 16 RC 22 RC 25

Dimensions (mm) A h Hole 12,7 11,6 M5x5 16 15,6 M6x5 22 20 M6x6 25 25 M6x6

Force (kg) 2 5 9 15

Model PM FC 50 FC 80 FC 100

Dimensions (mm) A h C 50 11,1 8,5 80 20,5 10 100 20,5 10

Force (kg) 11 50 70

Model PM MT 10 MT 20 MT 40 MT 600

Dimensions (mm) Width Lenght Thickness 10 1000 3 20 1000 3 40 1000 3 600 800 3

A

NC

FERRITE MAGNETS

SHALLOW POT Permanent magnets supplied with hook clamping.

C h A

FC Circular/Fine pole serie C

A

1 mm 3 mm

PL/FC

Model PL / FC PL/FC 130 PL/FC 160 PL/FC 200 PL/FC 250 PL/FC 300 PL/FC 400

Dimensions (mm) A C 130 50 160 50 200 50 250 50 300 50 400 52

Weight ~ kg 9 12 17 20 23 26

MAGNETIC TAPE

TAPE Plastic-ferrite magnetic tape, suitable for wide range of use and for painted surfaces.

1 mm

MT

Best for grinding operations on thin rings also with irregular shape. 6

11

PM

®

Permanent magnets

PL

®

Permanent chucks

Permanent magnets in alnico alloy. Permanent magnets shielded with a brass ring. The shield grants higher magnetic coactivity, allowing the item to maintain its characteristics even when inserted in ferrous components. The outer protection provides resistance to impact.

Radial pole serie C

A

Best for turning operations on thin rings also with irregular shape.

ALNICO ALLOY MAGNETS

POCKET Horseshoe converging pole magnets.

Model PM AK 79 AK 159

B

A

Dimensions (mm) A B C 22,2 25,4 7,9 27 35 15,9

Force (kg) 2,4 4

Model PL / RA PL/RA 150 PL/RA 200 PL/RA 250 PL/RA 300

Dimensions (mm) A C 150 50 200 50 250 50 300 52

Weight ~ kg 9 12 17 20

PL/RA

C

AK

HEAVY

Model PM AH 20 AH 25 AH 30 AH 405 AH 572 AH 826 AH 62 AH 86

Heavy duty bi-pole magnets with threaded hole. A

AH

B

C

Dimensions (mm) A B C 30 20 20 40 25 25 45 30 30 57 35 40,5 70 41,3 57,2 79,4 54 82,6 60 40 62 79 54 86

Hole 4 5 5 2x7,9 2x7,9 2x9,5 6,5 -

Force (kg) 4,5 9 12 23,5 37 47 35 60

TS

Single and double opening sine tables

Sine table is a useful tool for tilt work pieces. The tilting range is from 0° to 45° by sine car mechanical conception. The equipment provided of a trigonometric table showing minutes and degrees. It allows to reach the wished angle of inclination with DIN 875 (±0,005 + L/50000, about ± 20 seconds) tolerance. Available with PL/M chuck fitted on.

SINGLE OPENING SINE TABLE

BUTTON

A

Model PM AB 125 AB 191 AB 254 AB 318 AB 222

Button magnets with threaded hole.

C

AB

Dimensions (mm) A C Hole 12,5 9,5 4,5 19,1 12,7 4,8 25,4 15,9 4,8 31,8 25,4 7,1 22,2 19,1 4,8

Force (kg) 0,7 1,9 3,4 4,8 3

B

C

Model Dimensions (mm) TS/S A B C TS/S1 175 100 60 TS/S2 300 150 60

Weight Mod.PL/M ~ kg conbined 8 1018 18 1530

Model Dimensions (mm) TS/D A B C TS/D1 175 100 100 TS/D2 300 150 100

Weight Mod.PL/M ~ kg conbined 12 1018 31 1530

A

TS/S* POT Cylindrical magnets with threaded hole.

h

A

AP

Dimensions (mm) A h Hole 9,5 15,1 M3 12,7 15,9 M4 17,5 16 M6 20,5 19 M6 27 25 M6 35 30 M6

Force (kg) 1 2 2,7 4 6 14,5

Model PM AS 191 AS 286 AS 381

Dimensions (mm) A h Hole 19,1 7,75 3,7 28,6 8,7 4,8 38,1 10,6 4,8

Force (kg) 3 5 13

DOUBLE OPENING SINE TABLE C

A

B

SHALLOW POT Button magnets with threaded hole.

Model PM AP 95 AP 127 AP 175 AP 205 AP 27 AP 35

h

A

TS/D*

AS 10

7

MV

®

Magnetic prisms

MB

®

Magnetic stands Dial gauge stand with chromium plated rods. Magnetic base with ground surfaces grinded, and "V" groove.

With grinded surfaces at “V” groove, best to clamp round or rectangular pieces, in grinding or marking-out operations.

Magnetic “V” prism switch activated. Standard version for flat and round pieces.

M1 - M2 - M3 Series, provided of Micrometric adjusting system.

MV-7 70 60 72 90' 1,5 25

Lenght (mm) Width (mm) Height (mm) Angle a V Peso (kg) Clamping force on flat (kg)

Model MB60 /M1 MB60 /M2 MB60 /M3 MB30 /M1

MV-7

Dimensions (mm) Vertical rod Horizontal rod Ø 12 x 176 Ø 10 x 150 Ø 16 x 225 Ø 12 x 120 Ø 16 x 230 Ø 16 x 203 Ø 12 x 176 Ø 10 x 150

Hole Ø8 Ø8 Ø8 Ø8

S2 Series, provided of standard regulation. Magnetic “V” prism switch activated. Best for flat and round pieces. Strengthened version. .

MV-12 102 70 95 90' 3,6 40

Lenght (mm) Width (mm) Height (mm) Angle a V Peso (kg) Clamping force on flat (kg)

MB60/M1

Model MB60 /S2

MB60/M3

Hole Ø8

SF Series, provided with flexible chromium plated rod.

Model MB60 /SF

MV-12

Magnetic “V” prism switch activated. Best for flat and round pieces. Strengthened version.

Dimensions (mm) Vertical rod Horizontal rod Ø 16 x 225 Ø 12 x 180

Dimensions (mm) Flexible rod Max extension Ø 16 355

Hole Ø8

SH Series, provided with light alloyed rods with hydraulic fixturing system, complete of micrometric adjusting system. Lenght (mm) Width (mm) Height (mm) Poles (mm) Weight (kg) Clamping force on flat (kg) Clamping force on "V" (kg)

MV-10 100 100 100 5-11 7,5 50 25

MV-15 150 150 150 6-18 22 140 50

MB30/M1

MB60/M2

Model MB60 /SH

Dimensions (mm) Rod Arm 110 102

Hole Ø8

MV-10 / MV-15

LB

Fluid conveyor FC series, with flexible feeding pipe in high resistance plastic material, complete of round and flat nozzle. Magnetic base MB/60.

Laminar blocks

Model MB60 /FC

Useful to transfer magnetic fluid from chuck surface to the work-piece.

Ø pipe 1/4”

MB60/SF

Pole pitch 3,5 mm (brass) – 5 mm (steel).

LB1

Dimensions Work angle 150º

MB60/S2 Magnetic bases

Lenght (mm) Width (mm) Height (mm) Poles (mm) Weight (kg)

LB2

8

LB3

LB1 50 60 48 3,5/5 1,2

LB2 100 50 25 3,5/5 1,2

LB3 110 60 48 3,5/5 1,3

Mod. MB/60 MB/30

Dimensions (mm) Lenght Width Height 63 50 55 48 44 51

Magnetic Weight (kg) force 1 60 kg (588 N) 0,5 30 kg (294 N)

The magnetic field is activated by a switch or by a push-button on the base.

MB60/SH

MB60/FC 9

MV

®

Magnetic prisms

MB

®

Magnetic stands Dial gauge stand with chromium plated rods. Magnetic base with ground surfaces grinded, and "V" groove.

With grinded surfaces at “V” groove, best to clamp round or rectangular pieces, in grinding or marking-out operations.

Magnetic “V” prism switch activated. Standard version for flat and round pieces.

M1 - M2 - M3 Series, provided of Micrometric adjusting system.

MV-7 70 60 72 90' 1,5 25

Lenght (mm) Width (mm) Height (mm) Angle a V Peso (kg) Clamping force on flat (kg)

Model MB60 /M1 MB60 /M2 MB60 /M3 MB30 /M1

MV-7

Dimensions (mm) Vertical rod Horizontal rod Ø 12 x 176 Ø 10 x 150 Ø 16 x 225 Ø 12 x 120 Ø 16 x 230 Ø 16 x 203 Ø 12 x 176 Ø 10 x 150

Hole Ø8 Ø8 Ø8 Ø8

S2 Series, provided of standard regulation. Magnetic “V” prism switch activated. Best for flat and round pieces. Strengthened version. .

MV-12 102 70 95 90' 3,6 40

Lenght (mm) Width (mm) Height (mm) Angle a V Peso (kg) Clamping force on flat (kg)

MB60/M1

Model MB60 /S2

MB60/M3

Hole Ø8

SF Series, provided with flexible chromium plated rod.

Model MB60 /SF

MV-12

Magnetic “V” prism switch activated. Best for flat and round pieces. Strengthened version.

Dimensions (mm) Vertical rod Horizontal rod Ø 16 x 225 Ø 12 x 180

Dimensions (mm) Flexible rod Max extension Ø 16 355

Hole Ø8

SH Series, provided with light alloyed rods with hydraulic fixturing system, complete of micrometric adjusting system. Lenght (mm) Width (mm) Height (mm) Poles (mm) Weight (kg) Clamping force on flat (kg) Clamping force on "V" (kg)

MV-10 100 100 100 5-11 7,5 50 25

MV-15 150 150 150 6-18 22 140 50

MB30/M1

MB60/M2

Model MB60 /SH

Dimensions (mm) Rod Arm 110 102

Hole Ø8

MV-10 / MV-15

LB

Fluid conveyor FC series, with flexible feeding pipe in high resistance plastic material, complete of round and flat nozzle. Magnetic base MB/60.

Laminar blocks

Model MB60 /FC

Useful to transfer magnetic fluid from chuck surface to the work-piece.

Ø pipe 1/4”

MB60/SF

Pole pitch 3,5 mm (brass) – 5 mm (steel).

LB1

Dimensions Work angle 150º

MB60/S2 Magnetic bases

Lenght (mm) Width (mm) Height (mm) Poles (mm) Weight (kg)

LB2

8

LB3

LB1 50 60 48 3,5/5 1,2

LB2 100 50 25 3,5/5 1,2

LB3 110 60 48 3,5/5 1,3

Mod. MB/60 MB/30

Dimensions (mm) Lenght Width Height 63 50 55 48 44 51

Magnetic Weight (kg) force 1 60 kg (588 N) 0,5 30 kg (294 N)

The magnetic field is activated by a switch or by a push-button on the base.

MB60/SH

MB60/FC 9

PM

®

Permanent magnets

PL

®

Permanent chucks

Permanent magnets in alnico alloy. Permanent magnets shielded with a brass ring. The shield grants higher magnetic coactivity, allowing the item to maintain its characteristics even when inserted in ferrous components. The outer protection provides resistance to impact.

Radial pole serie C

A

Best for turning operations on thin rings also with irregular shape.

ALNICO ALLOY MAGNETS

POCKET Horseshoe converging pole magnets.

Model PM AK 79 AK 159

B

A

Dimensions (mm) A B C 22,2 25,4 7,9 27 35 15,9

Force (kg) 2,4 4

Model PL / RA PL/RA 150 PL/RA 200 PL/RA 250 PL/RA 300

Dimensions (mm) A C 150 50 200 50 250 50 300 52

Weight ~ kg 9 12 17 20

PL/RA

C

AK

HEAVY

Model PM AH 20 AH 25 AH 30 AH 405 AH 572 AH 826 AH 62 AH 86

Heavy duty bi-pole magnets with threaded hole. A

AH

B

C

Dimensions (mm) A B C 30 20 20 40 25 25 45 30 30 57 35 40,5 70 41,3 57,2 79,4 54 82,6 60 40 62 79 54 86

Hole 4 5 5 2x7,9 2x7,9 2x9,5 6,5 -

Force (kg) 4,5 9 12 23,5 37 47 35 60

TS

Single and double opening sine tables

Sine table is a useful tool for tilt work pieces. The tilting range is from 0° to 45° by sine car mechanical conception. The equipment provided of a trigonometric table showing minutes and degrees. It allows to reach the wished angle of inclination with DIN 875 (±0,005 + L/50000, about ± 20 seconds) tolerance. Available with PL/M chuck fitted on.

SINGLE OPENING SINE TABLE

BUTTON

A

Model PM AB 125 AB 191 AB 254 AB 318 AB 222

Button magnets with threaded hole.

C

AB

Dimensions (mm) A C Hole 12,5 9,5 4,5 19,1 12,7 4,8 25,4 15,9 4,8 31,8 25,4 7,1 22,2 19,1 4,8

Force (kg) 0,7 1,9 3,4 4,8 3

B

C

Model Dimensions (mm) TS/S A B C TS/S1 175 100 60 TS/S2 300 150 60

Weight Mod.PL/M ~ kg conbined 8 1018 18 1530

Model Dimensions (mm) TS/D A B C TS/D1 175 100 100 TS/D2 300 150 100

Weight Mod.PL/M ~ kg conbined 12 1018 31 1530

A

TS/S* POT Cylindrical magnets with threaded hole.

h

A

AP

Dimensions (mm) A h Hole 9,5 15,1 M3 12,7 15,9 M4 17,5 16 M6 20,5 19 M6 27 25 M6 35 30 M6

Force (kg) 1 2 2,7 4 6 14,5

Model PM AS 191 AS 286 AS 381

Dimensions (mm) A h Hole 19,1 7,75 3,7 28,6 8,7 4,8 38,1 10,6 4,8

Force (kg) 3 5 13

DOUBLE OPENING SINE TABLE C

A

B

SHALLOW POT Button magnets with threaded hole.

Model PM AP 95 AP 127 AP 175 AP 205 AP 27 AP 35

h

A

TS/D*

AS 10

7

PL

®

Permanent chucks

PM

Brass and steel surface for maximum resistance and accuracy. Removable hexagonal key. Side stops. Permanent magnet circuit with high efficiency lifetime. Coolant and waterproof construction.

®

Permanent magnets BAR Cylindrical bar magnets in alnico alloy.

h

AC Micro pole serie

B

Model PL / M PL/M 1018 PL/M 1220 PL/M 1325 PL/M 1530 PL/M 1535 PL/M 1540 PL/M 1545 PL/M 2030 PL/M 2040 PL/M 2045 PL/M 2050 PL/M 2063 PL/M 2540 PL/M 2563

A

C

PL/M 0,5 mm

Best for grinding operations on small and thin components.

Model PM AC 10 AC 20 AC 25 AC 30

A

1,5 mm 0,5 mm

Dimensions (mm) A B C 105 180 45 120 200 45 130 250 45 150 300 45 150 350 45 150 400 45 150 450 45 200 300 45 200 400 45 200 450 45 200 500 50 200 630 52 250 400 50 250 630 52

Weight ~ kg 7 9 12 18 20 23 26 23 31 35 40 53 42 68

BAR Rectangular bar magnets in alnico alloy. h

AR A

Model PM AR 50 AR 75 AR 20 AR 40 AR 60 AR 65

Dimensions (mm) A h 4 10 5 20 8 24 10 30

A 15 15 10 12,5 12,5 15

Dimensions (mm) B 10 10 5 5 5 5

h 50 75 20 40 60 60

B

NEODIMIUM MAGNETS

POT Fine pole serie

B

Model PL / F PL/F 1220 PL/F 1325 PL/F 1530 PL/F 1535 PL/F 1540 PL/F 1545 PL/F 2030 PL/F 2035 PL/F 2040 PL/F 2045 PL/F 2050 PL/F 2063 PL/F 2540 PL/F 2563

A

C

PL/F Highest clamping force on small–medium components.

Bipolar magnets with high power and small dimensions.

1 mm 3 mm 1 mm

Dimensions (mm) A B C 120 200 45 130 250 45 150 300 45 150 350 45 150 400 45 150 450 45 200 300 45 200 350 45 200 400 45 200 450 45 200 500 50 200 630 52 250 400 50 250 630 52

Weight ~ kg 9 12 17 20 23 26 23 27 31 35 40 53 42 68

h

Model PM NC 127 NC 16 RC 22 RC 25

Dimensions (mm) A h Hole 12,7 11,6 M5x5 16 15,6 M6x5 22 20 M6x6 25 25 M6x6

Force (kg) 2 5 9 15

Model PM FC 50 FC 80 FC 100

Dimensions (mm) A h C 50 11,1 8,5 80 20,5 10 100 20,5 10

Force (kg) 11 50 70

Model PM MT 10 MT 20 MT 40 MT 600

Dimensions (mm) Width Lenght Thickness 10 1000 3 20 1000 3 40 1000 3 600 800 3

A

NC

FERRITE MAGNETS

SHALLOW POT Permanent magnets supplied with hook clamping.

C h A

FC Circular/Fine pole serie C

A

1 mm 3 mm

PL/FC

Model PL / FC PL/FC 130 PL/FC 160 PL/FC 200 PL/FC 250 PL/FC 300 PL/FC 400

Dimensions (mm) A C 130 50 160 50 200 50 250 50 300 50 400 52

Weight ~ kg 9 12 17 20 23 26

MAGNETIC TAPE

TAPE Plastic-ferrite magnetic tape, suitable for wide range of use and for painted surfaces.

1 mm

MT

Best for grinding operations on thin rings also with irregular shape. 6

11

MS

®

Magnetic squares

®

SUPER Permanent electro magnetic chuck SUPER QUAD for milling QUAD

For the corner positioning of ferrous round and flat pieces; ideal for welding and tracing operations.

Power and safety are the main characteristics of the innovative and patented Quadsystem permanent electro technology in use on permanent electro magnetic chuck with control unit. Best solution on milling machines and machining centre.

MS-1

• Quick, versatile and uniform clamping • 5 faces free for full machining in a single set up • No vibrations during machining operations • Reduced tools consumption • High stock removal • Better finishing and great accuracies

MS-2

• Easy installation on the machine • Practical use • Convenient and cost effective

MS-3 Monobloc construction. Great strength, long term reliability and maintenance free. AUTOMATIC SHIMMING SYSTEM - INCLUDED Composed of fixed pole extensions series (n.3 PFR 50/32) and mobile (n.13 PMQ 50/32), capable of adjusting itself to the workpiece to be clamped and to lock it firmly with no deformation. WORKPIECE

MS-4 Model MS-1 MS-2 MS-3 MS-4 MS-4A MS-5 MS-6

Dimensions (mm) Lenght Width Height 110 110 t16 85 50 t13 95 110 t16 140 37 140 105 36 105 225 20 225 300 35 300

GM

Angle Round min. Weight (kg) 13 0,6 10 0,3 13 0,5 90º 1,7 75º/60º/45º 1,5 90º 2 90º 4,6

MS-4A

WORKPIECE

MS-5

MS-6

Gripping magnet Gripping magnet Best for manual thin sheet handling.

B

A

Tables

h

Model GM-A

Load Max (kg) 50

Dimensions (mm) A B h 120 100 270

Weight (kg) 3

Model

Dimensions (mm) SQ 304 HD50 320x412

Vertical application

Technical characteristics Weight Poles Thickness (kg) n. (mm) 70 24 68

Force Tons. 8,5

GM-A 12

5

®

Permanent-electro magnetic battery lifter The Mag and Demag cycles performed with radio control allow to a single operator to handle loads of any dimension and shape, without main power supply also in rather accessible areas.

MF

®

Magnetic floaters

Located on board of the steel sheet stack, the flouters induce magnetic flux into the sheets, rejecting each other. It becomes easy to quickly remove the upper sheet.

The load, held exclusively by permanent magnets power, doesn’t need any power supply during handling operation.

MF 1/2/3 MF 4/5

Model Bat-Grip 300

Dimensions (mm) Lenght Width Height 690 328 400

MDS

Weight (kg) 160

Load plate Max (kg) 3000

Thickness min.(mm) 25

Load round Max (kg) 700

Diam. Max.(mm) 200

Force kg 6000

MF 1/2/3

MF 4/5

TD

Permanent electro magnetic chuck for EDM “spark erosion” The permanent-electro magnetic chuck for EDM with electronic control unit is unaffected by main power breakdown, no electric energy is needed during machining operations. No overheat. Uniform clamping.

MDS 304

Technical characteristics Dimensions Weight (mm) (kg) 300x450 52

D DE LU C IN

Dimensions (mm) a b c 96 102 52 132 122 52 132 170 60 132 356 32 260 350 50

d 60 90 90 90 150

e 7 9 9 10 12

Weight (kg)

Thick. max

Stack

1,3 2,1 3,6 7,5 22

6 6 6 -

80 100 150 320 320

f

250 250

Drilling machines with magnetic base

TD 50 – Portable drilling machine with magnetic base. The electromagnetic base equipped with electronic monitoring and visual signalling system protects from machine separation from steel during drilling or cutting. Innovative frame construction increases rigidity, tool life and quality of holes.

Remote control with power regulation. Total demagnetization even with alloyed material. Monobloc construction associated with washing channels circuit. Perfect fluid proofing. High reliability.

Model SQ

Model MF1 MF2 MF3 MF4 MF5

Technical characteristics Power supply Motor Spindle Magnet force Magnet base dimensions Two speed drill motor Max drilling capacity Max milling capacity Arbor holder Max depth of cut Max height Min. height Length Width Weight

Thickness (mm) 54

Laminar blocks mod. LB1

1260 W, 110-240 VAC 1200W MT2 max 12000N 90 x 180 mm I: 210 rpm / II: 420 rpm 19 mm 50 mm 19,05 mm 50 mm 524 mm 433 mm 300 mm 265 mm 17 kg

AS OPTION

DU 16

Universal adapter for twist drill, MT2 tip, for drills up to 16mm diameter.

TD 50

4

13

DM

®

®

Hand controlled magnetic lifter

Demagnetisers

In few seconds it removes any eventual residual magnetism from the work-piece machined on a magnetic chuck.

A range of 5 models available with lifting capacity from 250 kg up to 2000 kg, safety factor 3.

BENCH DEMAGNETIZERS

Monoblock construction. Nickel coated. Maintenance free. Light weight, compact, powerful, reliable. Ideal for flat and round loads, finished or rough.

The best for demagnetising small ferrous pieces.

Model DM/P 1215 DM/P 1520 DM/P 1524 DM/P 2030

Dimensions (mm) Lenght Width 120 150 150 200 150 240 200 300

Model DM/T 1020 DM/T 1520 DM/T 1535 DM/T 2040 DM/T 2060 DM/T 3060 DM/T 4060

Light dimensions (mm) Height Width Consumption (W) 100 200 3000 150 200 4500 150 350 5000 200 400 5500 200 600 7000 300 600 9000 400 600 12000

Consumption (W) 90 180 220 440

Practical and easy-to-use for all the requirements of the modern mechanical industry.

TUNNEL DEMAGNETIZERS – RECTANGULAR High power equipment suitable to demagnetise medium size pieces, even in alloyed material.

TUNNEL DEMAGNETIZERS – CIRCULAR Same characteristics of the previous model, but with round light passage.

MH

Vertical loading system for flat components available for MaxX 250/500/1000.

Magnetic separators for hoppers

A

14

Light dimensions (mm) Diameter Consumption (W) 200 3500 300 4500 400 7000

MVS

C

B

Model DM/C 20 DM/C 30 DM/C 40

Magnetic grid in neodymium for dusts and grained materials separation. The permanent magnetic field stops ferrous magnetic elements from the others.

Model MH1 MH2 MH3 MH4

A 200 200 300 200

Dimensions (mm) B C 200 50 250 50 300 50 200 100

Model MaxX 250 MaxX 500 MaxX1000 MaxX1500 MaxX2000

Dimensions (mm) Lenght Width Height 189 185 79 249 235 101 342 316 131 383 457 171 457 457 171

Weight (kg) 6 15 34 66 80

Load plate Max (kg) 250 500 1000 1500 2000

Thickness min. (mm) 20 25 40 45 55

Load round Max (kg) 100 200 400 600 800

Diam. Max. (mm) 300 400 450 500 600

Force (kg) 750 1500 3000 4500 6000 3

®

Index Hand controlled magnetic lifters MaxX lifters MVS series

p. 03 p. 03

Permanent-electro battery lifters Bat-Grip 300

p. 04

Permanent-electro magnetic chucks KIT MDS 304 for Spark erosion KIT SQ 304 HD50 for milling

p. 04 p. 05

Permanent magnetic chucks PL/M MICROFINE pole pitch (1 + 0,5 mm) PL/F FINE pole pitch (3 + 1 mm) PL/FC round FINE pole pitch (3 + 1 mm) PL/RA RADIAL pole

p. 06 p. 06 p. 06 p. 07

Sinus tables TS/S* –single opening TS/D* –double opening

p. 07 p. 07

Magnetic prisms MV-7 MV-12 MV-10 MV-15 Laminar blocks LB1 LB2 LB3

p. 08 p. 08 p. 08 p. 08

p. 08 p. 08 p. 08

Dial gauge magnetic stands MB60 /M1 MB60 /S2 MB60 /M2 MB60 /M3 MB60 /SH MB60 /SF MB30 /M1 MB60 /FC

p. 09 p. 09 p. 09 p. 09 p. 09 p. 09 p. 09 p. 09

Permanent magnets AK – Pocket AH – Heavy AB – Button AP – Pot AS – Shallow pot AC – Round bar AR – Rectangular bar NC – Neodimium pot FC – Ferrite shallow pot MT – Magnetic tape

p. 10 p. 10 p. 10 p. 10 p. 10 p. 11 p. 11 p. 11 p. 11 p. 11

2

Magnetic squares MS1 MS2 MS3 MS4 MS4-A MS5 MS6

p. 12 p. 12 p. 12 p. 12 p. 12 p. 12 p. 12

Magnetic holder GM-A

p. 12

Magnetic flouters MF1 MF2 MF3 MF4 MF5

p. 13 p. 13 p. 13 p. 13 p. 13

Drilling machine with magnetic base TD50

p. 13

Demagnetisers DM/P Bench demagnetiser DM/T Tunnel - rectangular DM/C Tunnel – circular

p. 14 p. 14 p. 14

Magnetic separators MH

p. 14

Permanent magnets for industrial application AlNiCo Ferrite Rare earth

p. 15 p. 15 p. 15

Digital gaussmeter DG5060

p. 15

IM

Our 30 years experience is at your disposal to provide engineering assistance, selection suggestions and samples on a wide range of SINTERED ALNICO, FERRITE and RARE EARTH MAGNETS. We can offer various sizes and shapes to meet customer specific requirements with a short delivery time.

AlNiCo AlNiCo magnets are resistant to high temperatures and have fairly high energy products. As the name suggests, these magnets contain aluminium, nickel and cobalt. Cast Alnico can be made into shapes that may not be possible with other materials and sintered Alnico shows stronger mechanical characteristics.

Ferrite Ferrite magnets are the most popular magnets available today and are usually composed of either barium or strontium ferrite and iron oxide. These magnets display a high level of coercive force, which allows them to be more resistant to demagnetization.

Rare Earth Rare earth magnets are the most powerful permanent magnets available for commercial use. Generally available grades are samarium cobalt (SmCo) or neodymium iron boron (NdFeB). Rare earth materials offer energy products from 18 MGOe to over 50 MGOe, depending on material and grade.

For additional details and dedicated quotations, please provide us the following data: Size and tolerances

Max. temperature (Cº)

Type of magnetic material

Quantity

Holding power (kg)

Application description

DG www.allmag.net

®

Permanent magnets for industrial application

Digital gaussmeter This tool measures residual and induced magnetic fields, in a range between 0 to 20.000 gauss. Weight 0,45 kg.

Model DG 5060

Lenght 132

Dimensions (mm) Width Height 135 38

Probe thick. 2

15

tic e n g a m All on ipment equ

Tecnomagnete world The new Allmag product line comes from Tecnomagnete 30 years experience in development, manufacture and commercialization of permanent-electro magnetic systems. With tens of thousands systems all around the world in workholding on

machine tools,ferrous loads handling and quick mould change on presses, Tecnomagnete is the leader in industrial magnetism. With Allmag Tecnomagnete world is now closer to you.

Workholding

Moulding and Stamping

Subsidiaries: France: TECNOMAGNETE Germany: TECNOMAGNETE Japan: TECNOMAGNETE Sweden: TECNOMAGNETE P.R. China: TECNOMAGNETE USA: TECNOMAGNETE

Head office:

TECNOMAGNETE spa 20020 Lainate (MI) - Italia - Via Nerviano 31 Tel. +39-02.937.591, Fax +39-02.935.708.57 e-mail: [email protected]

Safety Through Power

www.tecnomagnete.com

S.A.R.L. GmbH Ltd AB R.O. Inc.

ALLMAG-ING-2004-30/03

We reserve the right to make changes connected with engineering progress.

Material Handling

Suggest Documents