AFCEE Iraq Construction Standards September 2006
Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
INTENT AND USE The intent of this document is to aid all stakeholders, whether Contractor, Government, Title II Quality Assurance Representatives, or end-users associated with the construction project in determining the specificiations to be used and which standards and codes are applicable for each phase of construction. Due to the unique nature of reconstruction in Iraq, which included at the outset varying levels of skilled tradesmen and widely-ranging qualities of construction materials, as well as the continuing lack of a uniformly enacted and enforced Iraqi National Building Code, AFCEE contracts have previously specified that the International Building Code (IBC) was to be utlized whererever feasible. With nearly three years experience providing construction in Iraq for AFCEE, AFCEE now recognizes there has been significant development in contractor capabilities and expects our WERC, HERC, and Iraqi subcontractors to build to the International Buidling Code standards as the norm. Recognizing that the Iraq reconstruction program continues amidst hostilities, shortages in skilled manpower and quality materials, logisitical challenges and tight deadlines, AFCEE realizes that the standards of the International Buidling Codes may not in all cases be achievable. AFCEE's intent is to deliver the end-users the highest quality facilities possible within the given schedule and budget. In keeping with this intent; where the contractor cannot comply with the requirements of the International Building Code, as a minimum, the contractror will comply with the requirements of the existing Iraqi specification for that particular phase of construction.
The document is based on the AFCEE Statement of Requirements (SOR) section provided with AFCEE Task Orders. The Statements of Requirements are at times silent as to the specific requirements regarding codes and standards, and for this reason, the document contains all applicable industry standards and references for the specific requirement, as well as the International Building Code and Iraqi specifications for the requirement. The information contained in this document is provided in a format consistent with each SOR Section. For ease of reference, this document is also organized with the SOR specifications arranged by Construction Specification Institute (CSI) Master Format numbering sequence. Deviations from the International Buidling Code or other applicable referenced standard, specification or code must be submitted in writing to the Contracting Officer’s Representative (COR) at least 14 days in advance of planned implementation. The request for deviation must include a precise explanation for each requirement as to why the IBC or other specifications is not applicable, practical, or not achievable. This document and the specifications contained in it will be used by AFCEE Iraq Contracting Officer's Representatives and AFCEE Iraq Title II Quality Assurance to ensure contractual compliance and to evaluate construction methods, materials and workmanship for compliance with contractual requirments.
Page 2 of 40
ABBREVIATIONS
REFERENCE DOCUMENTS Following is a list of documents referred to in this guide specifications. For convenience, these documents have been posted on the VIAP-Iraq website under the AFCEE Interim Iraqi Construction Standards. For information contact AFCEE Iraq Quality Assurance Program Manager, Bill Johnson at
[email protected]. AFCEE Interim Iraqi Construction Standards - Civil Work Specifications. Developed in cooperation with the University of Technology - Baghdad.
AFCEE Air Force Center for Environmental Excellence AIICS AFCEE Interim Iraqi Construction Standards CSI
Construction Specifications Insitute Master Format 2004
SOR
AFCEE Iraq Statement of Requirements
AFCEE Interim Iraqi Construction Standards - Electrical Services Specifications. Developed in cooperation with the University of Technology - Baghdad. General Technical Conditions and Specifications. Book -1 / 2; Specification of Materials; Workmanship of Civil Engineering Works; Second Edition. Al Fao General Engineering Company. Iraqi Building Code Requirements for Reinforced Concrete. Code 1/ 1987 Building Research Centre; Scientific Research Council. Iraqi Ministry of Housing and Construction - Technical Specification, Book 4: Mechanical Works_General. 1993. Iraqi Ministry of Housing and Construction - General and Technical Specifications of the Sanitary Works. Ministry of Higher Education and Scientific Research Architectural, Structural, Electrical, Mechanical, and Sanitary Specifications; University of Technology, Consulting Engineering Office.
Page 3 of 40
CSI DIVISION NUMBERS AND TITLES
Page 4 of 40
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.00.01 2.00.02
2.00.03 2.00.04 2.00.05
2.00.06 2.00.07 2.00.08 2.00.09 2.00.10
2.00.11
2.00.12
2.00.13
Statement of Requirements Definition Completely remove all debris, rubble, and trash in each building. Completely remove all damaged floor tiles, ceiling tiles, window casements, doorframes, mechanical ductwork, straps, hangers, inserts, electrical boxes, and devices. Repair all walls, ceilings, overheads, and floors.
Construction Specifications Institute (CSI) # 02 42 00 02 41 16.13
Construction Specifications Institute # Description Removal and Salvage of Construction Material Demolition, Building Demolition
Code IBC IBC
Code #
Code Description
Section 3403 Additions, Alterations and Repairs Section 3303 Demolition
Iraqi Specification
Specification Description
AFCEE IICS - Civil Work Specifications
2-1
AFCEE IICS - Civil Work Specifications
2-1
AFCEE IICS - Civil Work Specifications
2-1
General, Destruction of Establishments
AFCEE IICS - Civil Work Specifications
2-1
General, Destruction of Establishments
Alterations and
AFCEE IICS - Civil Work Specifications
2-1
General, Destruction Establishments General, Destruction Establishments General, Destruction Establishments General, Destruction Establishments Movement Joints, Laitance removal
02 01 80
Maintenance of Facility Remediation
IBC
Eliminate ceiling tile except where absolutely necessary Eliminate dropped ceilings except where absolutely necessary for chase development of enveloping equipment (Exception: Those areas where mandated by HVAC loads such as a DFAC). Repair all damage to exterior and interior walls. Seal all open cracks on interior and exterior walls. Repair all concrete awnings.
N/A 02 01 80
Customer Requirement Maintenance of Facility Remediation
N/A IBC
Section 3403 Additions, Alterations and Repairs N/A Customer Requirement Section 3403 Additions, Alterations and Repairs
02 01 80
Maintenance of Facility Remediation
IBC
02 01 80
Maintenance of Facility Remediation
IBC
Remove all loose materials and patch to match existing building surface. Repair any supporting structure as required.
02 01 80
Maintenance of Facility Remediation
IBC
02 01 80
Maintenance of Facility Remediation
IBC
Clean and repair all tarred joints in the roofing slabs. Reseal all joints and make watertight. Test water tightness of roofing and wall openings. Where possible, eliminate parapets from building vertices. Consider steel trussed roofs vs. poured roofs where procurement and cost of steel permits. Enclose or fill in all existing openings in the walls, floors and ceilings with structurally stable material. All openings in the roof structure and exterior wall shall be made watertight. Remove and replace all damaged interior doors.
02 01 80
Maintenance of Facility Remediation
IBC
05 44 00
Cold Formed Metal Trusses
IBC
Section 2308 Conventional Light Frame Construction
AFCEE IICS - Civil Work Specifications
02 01 80
Maintenance of Facility Remediation
IBC
Section 3403 Additions, Alterations and Repairs
AFCEE IICS - Civil Work Specifications
Section 3403 Additions, Repairs Section 3403 Additions, Repairs Section 3403 Additions, Repairs Section 3403 Additions, Repairs Section 3403 Additions, Repairs
Iraqi Specification Number
Alterations and
AFCEE IICS - Civil Work Specifications
2-1
Alterations and
AFCEE IICS - Civil Work Specifications
2-1
Alterations and
AFCEE IICS - Civil Work Specifications
Alterations and
Iraq Building Code Requirements for Reinforced Concrete
2-1 4.5, 4.4.5 and 4.4.6
General, Destruction of Establishments General, Destruction of Establishments
of of of of
2-1
General, Destruction of Establishments
06 48 13
Interior Wood Door
IBC
2-1
Metal Doors
IBC
Section 3403 Additions, Alterations and Repairs Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
08 13 00
AFCEE IICS - Civil Work Specifications
Chapter 16.16
General, Destruction of Establishments Doors and Windows
08 14 00
Wood Doors
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
06 48 16
Wood Door Frames
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
09 91 23
Interior Painting
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
08 14 00
Wood Doors
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
08 91 26
Door Louvers
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
2.00.13.07
Install wooden doors and door frames at all interior door locations. Mechanical room doors shall not have glass but will have a grated vent. Main entrance door shall be steel and reinforced.
08 11 00
Metal Doors and Frames
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
2.00.13.08
All steel doors shall have steel frames.
08 11 00
Metal Doors and Frames
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
2.00.13.09
Paint all steel doors and frames with the same system as specified for metal above. All doors, frames, and hardware shall be commercial / institutional grade capable of withstanding heavy use.
09 91 13
Exterior Painting
IBC
Section 805 Decorations and Trim
AFCEE IICS - Civil Work Specifications
08 10 00
Doors and Frames
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16
Doors and Windows
2.00.13.01
2.00.13.02
2.00.13.03
2.00.13.04 2.00.13.05 2.00.13.06
2.00.13.10
Remove and replace all damaged exterior doors with insulated steel doors and frames. All necessary hardware, including locks, will be included for all doors. Ensure all doorframes are flush with the wall and seams are sealed. Paint all interior doors and frames. Install wooden doors and door frames at all interior door locations. Ensure all doorframes are flush with the wall and seams are sealed. Paint all interior doors and frames. Install wooden doors and door frames at all interior door locations. Paint all interior doors and frames.
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Page 5 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.1.
2.2. 2.2.01
2.2.01 01
Statement of Requirements Definition Perimeter Wall: At each base the ECP shall meet Coalition Force Protection Standards for vehicle and personnel entrance. Provide new guard towers and security fencing as required. Contractor is to coordinate with the MITT team on site in order to meet the location requirements. Guard towers shall be spaced no more than 300 meters apart Electrical Work: Renovate the existing and/or install a new and complete building electrical power and lighting system to include all wiring. Panels
Construction Specifications Institute (CSI) # 32 31 00
26 00 00 26 05 19
Code
Code #
Code Description
Fences and Gates
CFPS
Customer Customer Requirement requirement
Electrical Low-Voltage Electrical Power Conductors and Cables
NEC NEC
N/A N/A Article 300 & Conductors for General 310 Wiring and Wiring Methods
Electrical Panel board Schedule
NEC
2.2.01 02
Breakers
26 28 16
Enclosed Switches and Circuit Breakers
NEC
Article 408 Switchboards and Panel boards Article 240 Over current Protection
2.2.01 03
Switches
26 27 26
Wiring Devices
NEC
Article 404 Switches
2.2.01.04
Outlets
26 27 26
Wiring Devices
NEC
2.2.01 05
Junction boxes
26 27 26
Wiring Devices
NEC
2.2.01 06
Connectors
26 05 33
Raceway and Boxes for Electrical Systems
NEC
2.2.01 07
Conduit
26 05 33
Raceway and Boxes for Electrical Systems
NEC
Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 342, Intermediate Metal 344, 358, Conduit/Rigid Metal Conduit; 353, 365 Electrical Metallic Tubing; Rigid Nonmatallic Conduit; High Density Polyethylene Conduit; Electrical Nonmetalic Tubing
2.2.01 08
Fixtures
26 51 13
Interior Lighting Fixtures
NEC
2.2.01 09
Fluorescent lights shall be mounted on walls (near full wall height) vs. ceiling mounted. Steel conduit shall be exposed instead of embedded placement Install lights in each room and at least four (4) electrical outlets. Minimum of one (1) outlet per wall that is 2m long or longer, space receptacles at 2m maximum spacing.
26 51 13
Interior Lighting Fixtures
NEC
26 06 20.26
Wiring Device Schedule
NEC
2.2.01 10
26 06 20.16
Construction Specifications Institute # Description
2.2.02
All outlets in bathrooms, kitchens, and other wet locations shall be waterproof type.
26 51 13
Interior Lighting Fixtures
NEC
2.2.03
Complete the interior and exterior electrical system with commercial/institutional grade wiring and fixtures using International Electric Code. This is to include tracing any existing electrical wires and/or providing new wiring.
26 05 19
Low-Voltage Electrical Power Conductors and Cables
NEC
2.2.03 01
Installation of all switches.
26 27 26
Wiring Devices
NEC
2.2.03 02
Lights with cover
26 51 13
Interior Lighting Fixtures
NEC
2.2.03 03
Ceiling fans
N/A
NEC
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
N/A
Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps Article 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 300 & Conductors for General 310 Wiring and Wiring Methods
Iraqi Specification AFCEE IICS - Civil Work Specifications
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Specifications AFCEE IICS - Electrical Specifications AFCEE IICS - Electrical Specifications AFCEE IICS - Electrical Specifications
3-4
Specification Description General, Fencing the Site
Section 3
Cables and Wires
Services
Section 2.4
Distribution Board Miniature and Molded Case Circuit Breakers Installation, Sockets and Switches Socket Outlets
Services
Section 2.5
Services
Section 4
Services
Section 4.11
AFCEE IICS - Electrical Services Specifications
Section 3.1.5
AFCEE IICS - Electrical Services Specifications
Section 5.1
Lighting Fixtures
AFCEE IICS - Electrical Services Specifications
Section 5.1
Lighting Fixtures
Section 3
Cables and Wires
Section 4
Installation, Sockets and Switches Lighting Fixtures
N/A
N/A
Support and Fixing for Cable
N/A
N/A
AFCEE IICS - Electrical Services Specifications
Article 404 Switches AFCEE IICS - Electrical Services Specifications Article 410 luminaries (lighting fixtures), AFCEE IICS - Electrical Services Lamp holders and Lamps Specifications Article 422 Appliance
Iraqi Specification Number
Section 5.1
N/A
Page 6 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.2.03 04 2.2.03 05
Statement of Requirements Definition Air-conditioning with electric heaters.
Construction Specifications Institute (CSI) # 23 81 16
Room Air-Conditioners
NEC
26 06 20.26
Wiring Device Schedule
NEC
Enclosed Switches and Circuit Breakers
NEC
Electrical Panel board Schedule
NEC
Electrical outlets
2.2.03 06
Breakers
2.2.03 07
Main panels
26 06 20.16
2.2.03 08
The contractor shall provide main distribution panel for the generator. The completed system will be connected into the generated electrical power distribution system. The Contractor shall be responsible for trenching and laying underground cable at least 1 meter deep from the buildings to the main distribution panel, with a minimum of 90 cm depth. The building electrical lines shall be in metal conduit for exposed installation.
26 06 20.16
2.2.04 2.2.05
2.2.06
26 28 16
Construction Specifications Institute # Description
Code
Electrical Panel board Schedule
NEC
26 10 00
Medium-Voltage Electrical Distribution
NEC
26 05 43
Underground Ducts and Raceway for Electrical Systems
NEC
26 05 33
Raceway and Boxes for Electrical System
NEC
Code #
Code Description
Article 440 Air-Conditioning and Refrigerating Equipment Article 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) Article 240 Over current Protection
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications N/A
Iraqi Specification Number
Specification Description
Section 4.16
Electrical Installation (for air conditioning) Socket Outlets
Section 4.11
Section 2.1.1
Miniature and Molded Case Circuit Breakers Main L.V. Switchboard
Section 2.1.1
Main L.V. Switchboard
AFCEE IICS - Electrical Services Specifications
Section 3.1.11
Cables Laid Direct in the Ground
Intermediate Metal AFCEE IICS - Electrical Services Conduit/Rigid Metal Conduit Specifications
Section 3.1.5
Support and Fixing for Cable
Article 408 Switchboards and Panel boards Article 408 Switchboards and Panel boards Article 110 Requirements for Electrical Installation Article 300 Underground Installation section 300.50 Article 342/344
Iraqi Specification
2.2.06 01
Cable trays
26 05 36
Cable Trays for Electrical Systems
NEC
Article 392 Cable Trays
2.2.06 02
Each wire shall be numbered at the terminal points with a permanent numbering system.
26 05 19
Low-Voltage Electrical Power Conductors and Cables
NEC
Article 200 Use and Identification of Grounded Conductors
2.2.07
The contractor shall provide a communications site infrastructure for telephone as integral part of the infrastructure plan. The contractor shall provide computer systems as an integral part of the infrastructure plan. For facilities traditionally earmarked for computer systems. The contractor shall develop provisions for LAN network with consideration provided for Wireless Computer Networks. The contractor shall include the electrical outlets in hidden but accessible locations to power the duct-node computer networks like those found in hotels and office buildings.
27 30 00
Voice Communications
NEC
Article 800 Communications Circuits
AFCEE IICS - Electrical Services Specifications
27 20 00
Data Communications
NEC
Article 800 Communications Circuits
N/A
27 20 00
Data Communications
NEC
Article 830 Communications Circuits
N/A
27 20 00
Data Communications
NEC
Article 800 Communications Circuits
N/A
Perimeter & Exterior Lights
26 50 00
Lighting
NEC
AFCEE IICS - Electrical Services Specifications
Section 5.1
Lighting Fixtures
The contractor shall provide appropriate security lighting to all building entries, exit ways, building perimeters (1 per corner), and courtyard areas. Exterior lighting system shall provide sufficient lighting in all areas commonly used at night in accordance with ground illumination requirements of the NEC Utilize area lights mounted on building exteriors vs. polemounted lighting wherever feasible.
26 55 53
Security Lighting
NEC
AFCEE IICS - Electrical Services Specifications
Section 5.1
Lighting Fixtures
26 56 00
Exterior Lighting
NEC
AFCEE IICS - Electrical Services Specifications
Section 5.1
Lighting Fixtures
26 56 00
Exterior Lighting
NEC
AFCEE IICS - Electrical Services Specifications
Section 5.1
Lighting Fixtures
26 10 00
Medium-Voltage Electrical Distribution
NEC
N/A
N/A
NEC
Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps Article 110 Requirements for Electrical Installation Article 110 Requirements for Electrical Installation
AFCEE IICS - Electrical Services Specifications
Section 0
General Requirements
N/A
N/A
NEC
Article 110 Requirements for Electrical Installation
AFCEE IICS - Electrical Services Specifications
Section 1.1
Installation of Internal Electrical Services
26 10 00
Medium-Voltage Electrical Distribution
NEC
General Requirements
Medium-Voltage Electrical Distribution
NEC
AFCEE IICS - Electrical Services Specifications N/A
Section 0
26 10 00
Article 110 Requirements for Electrical Installation Article 110 Requirements for Electrical Installation
2.2.07 01
2.2.07 02
2.2.07 03
2.2.1
2.2.1 01
2.2.1 02
2.2.1 03
2.2.2 2.2.2.01
2.2.2.02
2.2.2.03 2.2.2.04
Power Distribution The Contractor shall provide the electrical power distribution system in accordance with the International Building Code Electrical Standards. The Contractor shall provide for the connection of electrical system into the existing Iraqi National local sub-station, if possible. The contractor shall plan and install a complete electrical distribution system for the area. The electrical system shall be connected to all buildings requiring electrical service.
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications
Section 2.5
Section 3.12 & 3.13.1 Heavy Duty Cable Tray & Suspend Tray Section 3.1.10 & 3.7 Identification of Cables & Cable Core Identification Section 7.1.2 Telephone System
N/A
Page 7 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.2.2.05
2.2.2.06
2.2.3
Statement of Requirements Definition Install switching panels, transformer and ring gears for each location to facilitate proper electrical distribution to each of the buildings. Install electrical cable from the distribution panel to the main breakers in each building and tent.
Construction Specifications Institute (CSI) # 26 12 00
26 05 19
Construction Specifications Institute # Description
Code
Medium-Voltage Transformer
NEC
Low-Voltage Electrical Power Conductors and Cables
NEC
Code #
Code Description
Iraqi Specification AFCEE IICS - Electrical Services Specifications
Section 1.3
AFCEE IICS - Electrical Services Specifications
Section 3
Cables and Wires
Article 110 Requirements for Electrical Installation Article 700 Emergency System
AFCEE IICS - Electrical Services Specifications N/A
Section 0
General Requirements
Section 10
Standby Diesel Generator Set
General
26 10 00
Medium-Voltage Electrical Distribution
NEC
26 36 23
Automatic Transfer Switch
NEC
26 10 13
Primary Unit Substation
NEC
Article 490 Equipment Over 600Volts, Nominal
AFCEE IICS - Electrical Services Specifications
N/A 26 05 43
N/A Underground Ducts and Raceway for Electrical Systems
N/A NEC
N/A N/A Article 300 Wiring Methods
N/A AFCEE IICS - Electrical Services Specifications
26 12 00
Meduim Voltage Transformers
NEC
2.2.4.01 02
26 05 13
Medium-Voltage Cables
NEC
2.2.4.01 03
Manholes
26 05 43
Underground Ducts and Raceway for Electrical Systems
NEC
2.2.4.01 04
Junction boxes
26 27 26
Wiring Devices
NEC
2.2.4.01 05
Connectors
N/A
N/A
NEC
2.2.4.01 06
Conductors
26 05 13.16
Medium-Voltage, Single- and MultiConductor
NEC
2.2.4.01 07
Switches
26 18 00
NEC
2.2.4.01 08
Fuses
26 18 16
Medium-Voltage Circuit Protection Devices Medium-Voltage Fuses
2.2.4.01 09
Overloads
26 18 00
NEC
Street and Motor Pool Lighting System.
26 56 00
Medium-Voltage Circuit Protection Devices Exterior Lighting
2.2.3.01 01
2.2.4 2.2.4.01
2.2.4.01 01
2.2.5
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
NEC
NEC
Specification Description
Article 450 Transformer and Transformer Vaults (Including secondary ties) Article 300 & Conductors for General 310 Wiring and Wiring Methods
The contractor shall provide connection of electrical system into the existing Iraqi National local sub-station, if possible. The power connection shall be installed in combination with and through an automatic transfer switch to the Electrical Power Generation Plant The Electrical Power Generation Plant shall be designed as the primary power generation system. Therefore, provide redundant power generation with the largest generator out of service. It is the intent to utilize the national power grid as a redundant electrical supply in addition to the Electrical Power Generation Plant. Criteria The contractor's plan shall provide continuous power through an underground or aerial electrical distribution system. The electrical system shall complete with all required transformers. (400V to11KV step-up and local step-down transformer) High voltage and low voltage cable
2.2.3.01
Iraqi Specification Number
Section 3.1.11
Article 450 Transformer and Transformer Vaults (Including secondary ties) Article 300 & Conductors for General 310 Wiring and Wiring Methods
AFCEE IICS - Electrical Services Specifications
Section 1.3
AFCEE IICS - Electrical Services Specifications
Section 3
Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 490 Equipment Over 600Volts, Nominal Article 300 & Conductors for General 310 Wiring and Wiring Methods
N/A
Article 490 Equipment Over 600Volts, Nominal Article 490 Equipment Over 600Volts, Nominal Article 430 Motors, Motor Circuits and Controllers Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps
Power Transformer
Cables Laid Direct in the Ground Power Transformer
Cables and Wires
N/A
N/A AFCEE IICS - Electrical Services Specifications
Section 3.13
High Tension Cable
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications N/A
Section 2.3
Fused Switchgear and Isolators Fused Switchgear and Isolators
AFCEE IICS - Electrical Services Specifications
Section 5.1
Section 2.3
Lighting Fixtures
Page 8 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.2.5.01
Statement of Requirements Definition
Construction Specifications Institute (CSI) # 26 56 00
Construction Specifications Institute # Description
Code
Code #
Code Description
Exterior Lighting
NEC
Article 410 Luminaries (lighting AFCEE IICS - Electrical Services fixtures), Lamp holders and Specifications Lamps
22 13 16
Sanitary Waste and Vent Piping
IPC
Section 701 General
Piping
22 13 16
Sanitary Waste and Vent Piping
IPC
Section 702 Materials
2.3.2.1
Waste lines from toilets will be a minimum of 100mm diameter and slope a minimum of 2%.
23 13 16
Sanitary Waste and Vent Piping
IPC
2.3.2.2
24 13 16
Sanitary Waste and Vent Piping
IPC
2.3.3
Lateral lines from the building to the sewer mains will slope at a minimum of 2%. Fittings
22 05 16
Expansion Fittings and Loops for Plumbing
IPC
2.3.4
Hangers
22 05 29
Straps
23 05 29
Hangers and Support for Plumbing Piping and Equipment Hangers and Support for Plumbing Piping and Equipment
IPC
2.3.5
2.3.6
Valves
22 13 19.33
Backwater Valves
IPC
2.3.7
Drains
22 13 19.13
Sanitary Drains
IPC
Floor drains shall be provided in each room that contains a water source Floor drains shall be provided in the mechanical equipment and toilet rooms as required. Drains shall be located near urinals or toilet partitions in toilet rooms In mechanical rooms, floor drains will be installed in such away to ensure positive slope to the drains, floor drains shall be provided to avoid running drain piping long distances above or over the floor. Install p-traps at all applicable locations
23 13 19.13
Sanitary Drains
IPC
24 13 19.13
Sanitary Drains
IPC
25 13 19.13
Sanitary Drains
IPC
26 13 19.13
Sanitary Drains
IPC
N/A
IPC
Section 1002 Trap Requirements
Section 424 Faucets and other Fixture Fittings
2.3. 2.3.00.1
2.3.2
2.3.7.1 2.3.7.2 2.3.7.3 2.3.7.4
2.3.7.5
The contractor shall conduct a complete site investigation and field check in order to fully research and document the existing electrical street and motor pool lighting system. The contractor shall map out all existing conditions. With this information, the contractor shall provide a complete plan illustrating all existing and proposed new work for the complete renovation of the installation’s street and motor pool lighting system. Construction shall not be started until the plan is approved. The contractor shall complete all work associated with the plan in order to provide a complete and comprehensive street and motor pool lighting system. Sanitary Work Renovate the existing and/or install a new and complete building sanitary sewer system to include all piping, fittings, hangers, straps, flanges, traps, vents, drains and fixtures.
N/A
IPC
Specification Description
Section 5.1
Lighting Fixtures
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Chapter 9
Building Drainage and Sanitary Fittings
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Section 704 Drainage Piping Installation AL-FAO General Engineering Company General Technical Conditions and Specifications Section 704 Drainage Piping Installation AL-FAO GEC - General Technical Conditions and Specifications Section 702.4 Fittings Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Table 308.5 Hanger Spacing AL-FAO GEC - General Technical Conditions and Specifications Section 308 Piping Support Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Section 715 Backwater Valves Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Section 412 Floor and Trench Drains AL-FAO GEC - General Technical Conditions and Specifications Section 412 Floor and Trench Drains AL-FAO GEC - General Technical Conditions and Specifications Section 412 Floor and Trench Drains AL-FAO GEC - General Technical Conditions and Specifications Section 412 Floor and Trench Drains AL-FAO GEC - General Technical Conditions and Specifications Section 412 Floor and Trench Drains AL-FAO GEC - General Technical Conditions and Specifications
Chapter 9
Building Drainage and Sanitary Fittings
2.3.8
Faucets
22 42 39
Commercial Faucets Supplies, and Trim
IPC
2.3.9
Vent system
07 72 23
Relief Vents
IPC
Chapter 9
Vents
2.3.10
Plumbing Fixtures
22 40 00
Plumbing Fixtures
IPC
Chapter 4
2.3.11
Domestic and cold water shall be provided in the facilities to serve the water heater usage and plumbing fixtures provided for the facility.
22 11 13
Facility Water Distribution Piping
IPC
Chapter 6
Fixtures, Faucets and Fixture Fittings Water Supply and Distribution
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Iraqi Specification Number
Iraqi Specification
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 3.2.3.12
Drainage and Vent Pipes
Section 3.2.3.12
Drainage and Vent Pipes
Section 9.3
Section 3.2.4.3
Sanitary Fittings
Piping
Section 6.2
Pipe Supports
Section 7.1
Valves and Strainers
Section 3.2.11.15
Floor Drains
Section 3.2.11.15
Floor Drains
Section 3.2.11.15
Floor Drains
Section 3.2.11.15
Floor Drains
Section 3.2.11.15
Floor Drains
-
Section 9.3
Sanitary Fittings
-
Section 9.4
Sanitary Fittings
-
Section 6
Section 3.2.11 -
Section 11.1
Pipe Work, Fittings and Installation Plumbing Fixtures Main Supply Distribution
Page 9 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.3.12
2.3.13 2.3.14
Statement of Requirements Definition Water service to each facility shall enter the building in a mechanical, storage, or similar type space. Isolation valves shall be installed at each facility and to separate latrine/shower area. All water piping shall be routed parallel to the building lines. Insulation shall be provided where required to control sweating of pipes.
Construction Specifications Institute (CSI) # 23 11 13
Construction Specifications Institute # Description
Code
Code #
Code Description
Facility Water Distribution Piping
IPC
Chapter 6
Water Supply and Distribution
24 11 13
Facility Water Distribution Piping
IPC
Chapter 6
22 07 19
22 07 19 Plumbing Piping Insulation
IPC
Section 607.2.1
Water Supply and Distribution Piping Insulation
2.3.15
Domestic water shall be distributed by means of schedule 40 galvanized steel pipe or suitable high pressure PVC equivalent. Note: the contractor shall provide galvanized Schedule 40 plumbing for sinks, showers, and toilets.
22 11 13
Facility Water Distribution Piping
IPC
2.3.16
The hot water shall be generated by electric water heaters
22 33 00
Electric Domestic Water Heaters
IPC
2.3.17
The storage unit shall be typically located inside the mechanical room, storage room, janitor room or similar type space. Floor drain shall be provided in each room that contains a water source. Floor drains shall be provided in the mechanical equipment and toilet room as required.
23 33 00
Electric Domestic Water Heaters
IPC
Sanitary Drains
IPC
Section 412 Floor and Trench Drains
22 41 23
Residential Shower Receptors and Basin
IPC
22 42 13
Commercial Water Closets, Urinals and Bidets
IPC
N/A
N/A
NA
N/A
N/A
IPC
09 30 13
Ceramic Tiling
IBC
09 30 00
Tiling
IBC
2.3.18
2.3.19
2.3.20
2.3.20.1
Install showers to include all piping, faucets, drains and concrete or tile work. Shower pan shall be lowered so all water on shower floor will run into the shower pan. Install Eastern style toilets and sinks (provision of concrete trough in barracks for the feet/hand wash/laundry). Include all piping and hardware to make the units functional. Provide foot wash stations in all places where there are showers
2.3.21
Provide sanitary sprayer and hose assembly at each toilet.
2.3.22
Latrine and shower walls, from floor to ceiling, shall receive ceramic tile. Provide tile base on all walls.
2.3.22.1 2.3.22.2 2.3.22.3 2.3.23 2.3.24
All the joints shall be grouted and sealed to prevent water migration into the walls. Shower units shall include a changing space and privacy enclosure. Latrine stalls shall receive a swinging door with barrel bolt closure. Hose connects with appropriate piping shall be provided in each latrine/shower facility.
24 13 19.13
32 01 19.61 10 21 16 10 26 19.16 22 45 36
Section 605 Materials, Joints and Connections
Chapter 5
Water Heaters
Iraqi Specification Number
Specification Description
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 11.1
Main Supply Distribution
AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
Section 3.2.4.2
Iraqi Specification
Section 417 Showers
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.2.11.8
Showers
Section 420 Water Closets
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.2.11.5
Eastern Water Closets
Section 501.4 Location
N/A
N/A
Section 424.4 Hose Connected Outlets
Sealing of Joints in Rigid Paving
IPC
Section Showers 1210.3 Section Walls 1210.2 Section 705 Joints
Shower and Dressing Compartments
IPC
Section 417 Showers
Shower Doors
IBC
Hand-held Emergency Drench Hoses
IPC
Section Bathroom Accessories 2606.9 Section 424.4 Hose Connected Outlets
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AFCEE IICS - Civil Work Specifications
Chapter 11
AFCEE IICS - Civil Work Specifications
Chapter 7
AFCEE IICS - Civil Work Specifications
Chapter 6
Water Supply and Distribution
2.4.1
The CONTRACTOR shall repair and renovate the existing water supply and distribution system and provide a new water supply and distribution system where required.
22 11 13
Facility Water Distribution Piping
IPC
Chapter 6
Water Supply and Distribution
N/A
IPC
Chapter 6
Water Supply and Distribution
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Sanitary Utility Sewerage Manholes, Frames and Covers
IPC
Section 708.3.6
Manholes
AL-FAO GEC - General Technical Conditions and Specifications
2.4.1.2.2
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
33 39 13
N/A
N/A
Chapter 11
Section 11.1
IPC
Floor Drains
N/A
Section 3.2.11.8
Facility Water Distribution
Electric Storage Water Heater
N/A
AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
22 11 00
N/A
Service and Distribution Pipes.
Cold and Hot Water Distribution
Water Supply & Distribution:
The main headers leaving the primary water pumping plant shall be at least two (2) pipe sizes oversized and have blind flanges located at tees near both ends of future expansion zones. Fabricate and install covers or access hatches at all manholes, and electric hand holes.
Section 3.3.2
Thermal Insulation
Iraq Ministry of Housing & Construction Section 11.2 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 11.6 and 11.7 General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Section 3.2.11.15 Conditions and Specifications
2.4.
2.4.1.2.1
Section 8
Piping
Section 3.2.11.8 N/A
Section 11
Section 1
Section 3.1.23
Finishing of Walls and Ceilings Construction Works Finishing of Walls and Ceilings Showers Showers N/A
Water Supply Main, Distribution, Service Pipes and Equipments General and Technical Specification of the Sanitary Work. Main Supply Distribution
Manholes
Page 10 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
Versar International Assistance Projects
AFCEE Iraq Construction Guide Specifications Requirements Sorted by SOR
Statement of Requirements (SOR) Section 2.4.1.2.3
2.4.1.2.4 2.4.1.2.5 2.4.1.2.6
2.4.1.2.7
2.4.1.3
2.4.1.3.1
2.4.1.3.10
2.4.1.3.2
2.4.1.3.3
2.4.1.3.4
2.4.1.3.5
2.4.1.3.6 2.4.1.3.7 2.4.1.3.8
2.4.1.3.9
2.4.2
2.4.3
Statement of Requirements Definition Cisterns
Construction Specifications Institute (CSI) # 33 39 13
Sanitary sewer and water system valve manhole covers shall be round cast iron. Recess and grout all concrete manhole caps.
33 39 13
Add fill dirt to within 2 centimeters on the top of concrete manhole cap and grade to slope away from manhole. Add fill dirt to cover an area of 2 meters around all sides of manhole. Service connections to individual building connections requiring water service shall be 1.5 meters outside each building, and shall have an isolation valve in a separate service box with accessible actuator. Pipe Bedding
33 39 13
33 39 13
Sanitary Utility Sewerage Manholes, Frames and Covers Sanitary Utility Sewerage Manholes, Frames and Covers Sanitary Utility Sewerage Manholes, Frames and Covers Sanitary Utility Sewerage Manholes, Frames and Covers
Code
Code #
IPC
Section 606.5.3
IPC IBC IBC
Code Description Covers
Iraqi Specification
Section Manholes 708.3.6 Section Concrete Masonry 2105.2.2.1.2 Section Fill Material J107.4
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications
Iraqi Specification Number Section 11.3
Specification Description Cold Water Storage Tanks
Section 3.1.23
Manholes
Section 3.1.23
Manholes
Section 3.1.23
Manholes
Section 3.1.28
Valves and Fittings
Water Utility Distribution Valves
IPC
Section 606 Installation of Building Water Distribution System
AL-FAO GEC - General Technical Conditions and Specifications
31 23 23.13
Backfill
IPC
Section 306 Trenching, Excavation and Backfill
Section 10.3
Bedding and Laying of Pipes
The CONTRACTOR will ensure that the following criteria are met when planning and installing the new, and renovating the existing underground water supply and distribution system: CONTRACTOR shall provide bedding material to level out any irregularities. Water supply mains sizes shall be calculated according to maximum daily future flows.
31 23 23.13
Backfill
IPC
Section 306 Trenching, Excavation and Backfill
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 10.3
Bedding and Laying of Pipes
Schedules for Water Utilities
IPC
Section 604 Design of Building Water Distribution System
Section 11.1
Main Supply Distribution
Compaction shall attain 95 percent maximum density for cohesionless soils, and 90 percent maximum density for cohesive soils. This is based on a Standard Proctor, ASTM D698. Maximum size of aggregate should be not more than 8 millimeters per 100 millimeters (1 inch per foot) of pipe diameter, or 75 millimeters (3 inches) maximum. Selected aggregate shall consist of well-graded sand, gravel, crushed gravel, crushed stone. The Contractor shall ensure that the water supply and distribution system conform to International Plumbing Code. The Contractor shall provide a new water supply and distribution system as needed.
32 23 23.23
Compaction
IBC
Section J107.5
Compaction
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
Section 3.1.8
Backfilling of Trenches
31 05 16
Aggregate for earthwork
IBC
Section J107.4
Fill Material
Section 10.5
Backfilling of Trenches
01 41 00
Regulatory Requirements
IPC
Section 1
Section 3.1.5
General and Technical Specification of the Sanitary Work. General and Technical Specification of the Sanitary Work. Existing Service
Section 3.1.5
Existing Service
The Contractor shall inspect all existing underground water piping for defects. The Contractor shall repair all damaged and defective underground water piping as necessary. After completion of a section of water supply pipe the Contractor shall provide a static pressure test of the system. Any leaks shall be repaired and the section shall be retested prior to backfilling the trench covering the pipe. The Contractor will plan the overall water supply and distribution system for the base population which will vary with each facility. The CONTRACTOR shall inspect all existing underground water piping and manholes for damage and defects. The CONTRACTOR shall repair all damaged and defective underground water piping as necessary. After completion of a water section, the CONTRACTOR shall provide a static pressure test of the system. Any leaks shall be repaired and the section shall be retested.
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
33 12 16
Construction Specifications Institute # Description
34 06 10
22 11 00
Facility Water Distribution
IPC
33 01 30.16
TV Inspection of Sewer Pipelines
IPC
33 01 30.71
Rehabilitation of Sewer Utilities
IPC
01 43 26
Testing and Inspecting Agency Qualifications
IPC
33 06 10
Schedules for Water Utilities
IPC
23 11 13
01 43 26
Facility Water Distribution Piping
Testing and Inspecting Agency Qualifications
IPC
IPC
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Chapter 6 Water Supply and Iraq Ministry of Housing & Construction General and Technical Specifications of Distribution the Sanitary Works Section 312 Tests and Inspections AL-FAO GEC - General Technical Conditions and Specifications Section 703.4 Existing Building Sewers and AL-FAO GEC - General Technical drains Conditions and Specifications Section 312 Tests and Inspections Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Chapter 6
Water Supply and Distribution
Section 604 Design of Building Water Distribution System Chapter 6
Water Supply and Distribution
Section 312 Tests and Inspections
Section 1
Section 2.3
Cold Water Systems
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 2.1
General Requirements
Section 2.1
General Requirements
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 2.3
Cold Water Systems
Page 11 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.4.4
Construction Specifications Institute (CSI) # 22 11 13
Facility Water Distribution Piping
IPC
Domestic water shall be distributed by means of standard weight (schedule 40) galvanized steel pipe that is installed underground with a minimum of 80cm coverage of compacted soil. Waste Water Disposal: The Contractor shall plan and construct a gravity waste water collection and treatment system.
23 11 13
Facility Water Distribution Piping
IPC
44 41 13
Packaged Water Treatment Plant
IPC
Section 701.4 Sewage Treatment
N/A
N/A
N/A
2.5.2
All sewerage lift stations are to be fenced and accessible only to Contractor tasked with maintenance of the WWCS
33 32 13
Packaged Sewage Lift Stations
IPC
Section 701.4 Sewage Treatment
N/A
N/A
N/A
2.5.3
The Contractor shall ensure that the sanitary sewer system conforms to International Plumbing Code.
01 41 00
Regulatory Requirements
IPC
2.5.4
The Contractor shall plan for a gravity sanitary sewer system. Where gravity flow is not practical, the system shall consist of a series of holding tanks. The holding tanks will not be placed at or in front of any entrance. The Contractor shall plan for a non-mechanical waste water treatment plant where practical, if gravity sewer to the Municipal facilities is not available. After completion of a section of sewer the Contractor shall provide a static pressure test of the system. Any leaks shall be repaired and the section shall be retested prior to backfilling of the trench. The Contractor will plan the overall sanitary sewer collection system for the base population with a requirement rate of 300 liters per person per day and the wastewater treatment plant at 200 liters per person per day. The Contractor shall complete all work in order to provide a complete and comprehensive sanitary sewer collection system. The Contractor is responsible for all planning and construction aspects for a complete sanitary sewer collection system. Pipe shall be installed from the holding tanks to the facility exterior to allow removal of product without entering the compound. Cleanouts will be provided at each building.
44 41 13
Packaged Water Treatment Plant
IPC
44 41 13
Packaged Water Treatment Plant
IPC
01 43 26
Testing and Inspecting Agency Qualifications
IPC
Section 312 Tests and Inspections
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.1.21
Testing Gravity Sewers and Manholes
33 06 30
Schedules for Sanitary Sewerage Utilities
IPC
Section 710 Drainage System Sizing
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.1.1
General Notes
33 06 30
Schedules for Sanitary Sewerage Utilities
IPC
Chapter 7
Sanitary Drainage
Section 9.1
33 06 30
Schedules for Sanitary Sewerage Utilities
IPC
Chapter 7
Sanitary Drainage
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Building Soil, Waste, Vent and Rain Water Pipe work. Building Soil, Waste, Vent and Rain Water Pipe work.
22 05 75
Facility Drainage Piping Cleanouts
IPC
Section 708 Cleanouts
AL-FAO GEC - General Technical Conditions and Specifications
22 14 00
Facility Storm Drainage
IPC
Chapter 11 Storm Drainage
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 9.1
Building Soil, Waste, Vent and Rain Water Pipe work.
22 14 00
Facility Storm Drainage
IBC
Section 1803 Excavation, Grading and Fill Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 9.1
Building Soil, Waste, Vent and Rain Water Pipe work.
22 14 00
Facility Storm Drainage
IPC
31 22 00
Grading
IBC
31 23 23
Fill
IBC
2.4.4.1
2.5. 2.5.1
2.5.5
2.5.6
2.5.7
2.5.8
2.5.9
2.5.12 2.6. 2.6.1
2.6.2
2.6.3
2.6.4 2.6.5
Statement of Requirements Definition Piping Materials
Site Storm Water Management System The CONTRACTOR shall conduct a complete site investigation and field check in order to fully research and document the existing site storm water management and drainage system. The CONTRACTOR shall map out all existing conditions. With this information, CONTRACTOR shall plan an overall comprehensive site storm water management and drainage plan. The CONTRACTOR shall incorporate the existing storm water management system, if applicable, into the new plan in order to ensure that the entire installation is provided with the most efficient drainage system available and that redundant work is not performed. Grade all areas to provide a uniform sloping surface. Provide fill material as needed to raise grade elevations in built up areas. Fill low areas, unused ditches, and holes.
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Construction Specifications Institute # Description
Code
Code #
Code Description
Table 605.3, Piping Materials Table 605.4 and 605.5 Table 605.3, Piping Materials Table 605.4 and 605.5
Chapter 7
Sanitary Drainage
Section 712 Sumps and Ejectors
Section 701.4 Sewage Treatment
Chapter 11 Storm Drainage
Iraqi Specification
Iraqi Specification Number
Specification Description
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.1.10
Pipe work
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.1.10
Pipe work
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works N/A
AL-FAO GEC - General Technical Conditions and Specifications
Section 1803 Excavation, Grading and Fill AL-FAO GEC - General Technical Conditions and Specifications Section J107 Fill AL-FAO GEC - General Technical Conditions and Specifications
Section 9.1
Section 9.2
N/A
Section 9.1
Section 3.2.11.12
Section 3.1.5
Section 3.1.3.3 Section 3.1.3.3
Building Soil, Waste, Vent and Rain Water Pipe work. Drainage Pump Stations
N/A
Pipe Cleanouts
Existing Service
Clearing and Grading of Site Clearing and Grading of Site
Page 12 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.6.6
2.6.7
2.6.8
2.7. 2.7.1
2.7.1.1
2.7.1.1.1
2.7.1.1.2 2.7.1.1.3
Statement of Requirements Definition Areas around facilities shall be graded to slope away from buildings and facilities in order to provide storm water drainage. Provide storm water management basins or pond areas away from developed areas for storm water detention.
Construction Specifications Institute (CSI) # 31 22 00
Soil fill shall be compacted to 90% of the maximum density in unpaved areas and 95% maximum density in paved areas determined by the Standard Proctor Method, ASTM D 698. Minimum extent of grading shall be 300 meters from any facility. Plumbing The CONTRACTOR shall plan and construct domestic cold water systems and the succeeding plumbing work in accordance with International Plumbing Code. Hot water systems
Hot water shall be provided for the facility to supply 49°C (120°F) hot water to fixtures and outlets requiring hot water. Hot water of a higher temperature shall be provided only where required for special use or process. Hot water piping shall be routed parallel to the building lines and concealed within finished rooms. All hot water piping shall be insulated.
Construction Specifications Institute # Description
Code
Code #
Code Description
Grading
IBC
Storm Water Drainage Reservoir
IPC
Compaction
IBC
Section J107.5
01 41 00
Regulatory Requirements
IPC
Chapter 6
22 11 13
Facility Water Distribution Piping
IPC
Section 607 Hot Water Supply System
22 11 13
Facility Water Distribution Piping
IPC
Section 607 Hot Water Supply System
Water Supply and Distribution Water Supply and Distribution Section 607 Hot Water Supply System
33 47 26
32 23 23.23
22 11 13
Facility Water Distribution Piping
IPC
22 11 13
Facility Water Distribution Piping
IPC
22 07 19
Plumbing Piping Insulation
IPC
Iraqi Specification Number
Iraqi Specification
Section 1803 Excavation, Grading and Fill AL-FAO GEC - General Technical Conditions and Specifications Chapter 11 Storm Drainage
Compaction
Water Supply and Distribution
Chapter 6
Section 3.2.1.4
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
Specification Description Scope of Work
Section 10.5
Backfilling of Trenches
Section 3.1.8
Backfilling of Trenches
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.2.1
Scope of Work
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works N/A
Section 11.2
Cold and Hot Water Distribution
Section 11.2
Cold and Hot Water Distribution
N/A Section 3.2.4.2
N/A Piping
2.7.1.2
Sanitary waste system.
22 13 00
Facility Sanitary Sewerage
IPC
2.7.1.3
Drains
22 13 13
Sanitary Drains
IPC
2.7.1.4
Vent system
22 13 16
Sanitary Waste and Vent Piping
IPC
2.7.1.5
Waste oil collection and storage.
44 42 49
Water Treatment Oil/Grease Interceptors
IPC
2.7.1.6
Fuel oil storage and distribution
23 13 00
Facility Fuel Storage Tanks
IMC
AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Chapter 7 Sanitary Drainage Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Section 412 Floor and Trench Drains AL-FAO GEC - General Technical Conditions and Specifications Chapter 9 Vents Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Section 1003 Interceptors and Separators Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Chapter 13 Fuel Oil Piping and Storage N/A
2.7.2 2.7.2.1
Sub-Contractors Qualifications The plumbing systems shall be executed by a plumbing specialist sub-contractor experienced in the plan and construction of these types of systems. All materials and equipment shall be standard product of a manufacturer regularly engaged in the manufacture of the product and shall duplicate items that have been in satisfactory use for at least two (2) years prior to bid opening. Plumbing Systems Requirements Compressed Air Systems:
01 43 23
Installer Qualifications
IPC
Section 106 Permits
01 43 13
Manufacturer Qualification
IPC
Section 303 Materials
22 61 00
Compressed-Air Systems for Laboratory and Healthcare Facilities Gas Compressors
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
N/A
N/A
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
2.7.1.1.4
2.7.3
2.7.4 2.7.4.00.1 2.7.4.01.01
43 12 00
Chapter 6
-
Section 8
-
Section 9.1
Section 3.2.11.15 -
Section 6
-
Section 10.6
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
N/A
Section 2.1
Section 3.2.1.8
Thermal Insulation
Building Soil, Waste, Vent and Rain Water Pipe work. Floor Drains Pipe Work, Fittings and Installation Manholes, Inspection Chambers and Gullies N/A
General Requirements
Scope of Work
2.7.4.01.02
Compressed air shall be provided using a packaged aircooled electric motor driven compressor ASME rated receiver
2.7.4.01.03
air cooler
N/A
N/A
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
2.7.4.01.04
moisture separator to remove moisture and oil.
N/A
N/A
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Page 13 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.7.4.01.05
2.7.4.01.06
2.7.4.01.07 2.7.4.01.08
2.7.4.1
Statement of Requirements Definition Compressed air system shall be capable of operation up to 1380 KPa (200 psig) maximum for 862 KPa (125 psig) normal units. High-pressure system (above 1380 KPa) shall be provided to supply compressed air to equipment where required.
Construction Specifications Institute (CSI) # 22 61 00
Provide an engine driven air compressor where needed for operation during electrical power outages. The air distribution system shall be provided with necessary regulator valves to maintain desired pressure. Criteria
Construction Specifications Institute # Description
Code
Code #
Code Description
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
22 61 00
Compressed-Air Systems for Laboratory and Healthcare Facilities
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
43 12 16
Piston Gas Compressors
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
22 61 00
Compressed-Air Systems for Laboratory and Healthcare Facilities
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
N/A
IPC
Section 604 Design of Building Water Distribution System Section 604 Design of Building Water Distribution System
N/A
The CONTRACTOR will plan the overall water supply and distribution system for the base population.
22 11 13
Facility Water Distribution Piping
IPC
2.7.4.1.2
Provide water pressure of 1.5 bars to the highest point in each building.
22 11 13
Facility Water Distribution Piping
IPC
Section 604 Design of Building Water Distribution System
Plumbing Fixtures
22 40 00
Plumbing Fixtures
IPC
Section 402 Fixture Materials
Eastern Water Closet with flush tank assembly
22 41 13
Section 420 Water Closets
22 41 13
Residential Water Closets, Urinals and Bidets Residential Water Closets, Urinals and Bidets N/A
IPC
Enameled cast iron, recessed floor mounted.
IPC
Section 402 Fixture Materials
2.7.4.2.1 2.7.4.2.1.1 2.7.4.2.1.2 2.7.4.3
2.7.4.3.1
2.7.4.3.2
2.7.4.4
2.7.4.4.1
2.7.4.4.2
2.7.4.5
Install p-traps at all water closet locations.
IPC
Section 1002 Trap Requirements
Lavatories
22 41 16
Residential Lavatories and Sinks
IPC
Section 416 Lavatories
Enameled cast iron, wall or counter mounted. Brass fittings provided for water supplies. In addition to lavatories, a combination foot and hand washing station will be provided. This should be a concrete trough assembly covered with ceramic tile. Install p-traps at all sink locations.
22 41 16
Residential Lavatories and Sinks
IPC
Section 416 Lavatories
N/A
IPC
Section 1002 Trap Requirements
Mop Sink
22 41 16
Residential Lavatories and Sinks
IPC
Section 427 Floor Sinks
Floor mounted enameled cast iron with copper alloy rim guard. Provide hot and cold-water valves with manual mixing. Faucet handles shall be copper alloy. Install p-traps at all sink locations
22 41 16
Residential Lavatories and Sinks
IPC
Section 427 Floor Sinks
N/A
IPC
Section 1002 Trap Requirements
N/A
N/A
N/A
Shower
22 41 23
2.7.4.5.1
Showerhead and faucet handles shall be copper alloy. Provide for manual mixing with hot and cold-water valves.
22 41 23
2.7.4.5.2
Shower head riser pipe shall be schedule 40 galvanized steel.
22 41 23
2.7.4.6
Emergency Shower
2.7.4.6.1
Eye Wash Assembly
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Specification Description
Compressed-Air Systems for Laboratory and Healthcare Facilities
2.7.4.1.1
2.7.4.2
Iraqi Specification Number
Iraqi Specification
Residential Showers Receptors and Basin Residential Showers Receptors and Basin
IPC
Section 417 Showers
IPC
Section 424 Faucets and other Fixture Fittings
Residential Showers Receptors and Basin
IPC
Section 605 Materials Joints and Connections
22 45 13
Emergency Showers
IPC
Section 411 Emergency Showers and Eyewash Stations
22 45 16
Eyewash Equipment
IPC
Section 411 Emergency Showers and Eyewash Stations
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
-
N/A
N/A
-
N/A
N/A
-
Section 9.3
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications
Sanitary Fittings
Section 3.2.11
Plumbing Fixtures
Section 3.2.11
Plumbing Fixtures
Section 3.2.11
Plumbing Fixtures
-
Section 9.3
Sanitary Fittings
-
Section 9.3
Sanitary Fittings
-
Section 9.3
Sanitary Fittings
-
Section 9.3
Sanitary Fittings
-
Section 9.3
Sanitary Fittings
-
Section 9.3
Sanitary Fittings
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 3.2.11.8
Showers
Section 3.2.11.8
Showers
N/A
N/A
N/A
N/A
N/A
N/A
Page 14 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.7.4.6.2
Construction Specifications Institute (CSI) # 22 45 33
Service Sink
Construction Specifications Institute # Description
Code
Code #
Combination Emergency Fixtures
IPC
N/A
22 41 16
Residential Lavatories and Sinks
IPC
Section 418
Standard trap type, enameled cast iron. Service sinks provided in maintenance areas shall be metallic, and in battery rooms acid resistant. Install p-traps at all sink locations
22 41 16
Residential Lavatories and Sinks
IPC
Section 418
N/A
IPC
Section 1002
Grease Interceptor
44 42 49
Water Treatment Oil/Grease Interceptors
IPC
Section 1003
2.7.4.8.1
Steel construction, manual cleaning type with removable checker-plate cover, complete with flow control valve.
44 42 49
Water Treatment Oil/Grease Interceptors
IPC
Section 1003
2.7.4.8.2
Concrete shall have 21 MPa (3045 psi) as a specified minimum compressive strength in 28 days. Floor or Shower Drain
2.7.4.7
2.7.4.7.1
2.7.4.7.2
2.7.4.8
2.7.4.9 2.7.4.9.1
2.7.4.9.2
2.7.4.10 2.7.4.11 2.7.4.11.1
2.7.4.12
Statement of Requirements Definition Provide in Vehicle Maintenance Building and in other facilities where required.
Cast iron construction with galvanized body, integral seepage pan, and adjustable perforated or slotted chromium plated bronze, nickel-bronze or nickel brass strainer consisting of a grate and threaded collar. Install p-traps at all drain locations
Provide vent line between last p-trap inside building and locate away from all entrances for the building Trench Drain Cast iron construction with galvanized body, integral seepage pan, and adjustable perforated or slotted chromium plated bronze, nickel-bronze, or nickel brass strainer consisting of a grate and threaded collar. Hose Bibs
N/A
Code Description N/A
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Sinks Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Sinks Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Trap Requirements Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Interceptors and Separators Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Interceptors and Separators
03 39 00
Concrete Curing
IBC
22 13 19.13
Sanitary Drains
IPC
Minimum Specified Tables 1904.2.2(2) Compressive Strength Section 412 Floor and Trench Drains
22 13 19.13
Sanitary Drains
IPC
Section 412 Floor and Trench Drains
N/A
IPC
Section 1002 Trap Requirements
N/A
Relief Vents
IPC
22 14 26.19
07 72 23
Facility Trench drains
IPC
Section 412 Floor and Trench Drains
Chapter 9
Vents
22 14 26.19
Facility Trench drains
IPC
Section 412 Floor and Trench Drains
N/A
N/A
IPC
Section Hose Connections 608.15.4.2
2.7.4.12.1
Provide steel taps vs. hose bibs in latrines
N/A
N/A
IPC
Section Hose Connections 608.15.4.2
2.7.4.12.2
Room hose bibs shall be provided as required
N/A
N/A
IPC
Section 606.4 Valve Identification
Plumbing Equipments Water heaters
22 33 00
Electric Domestic Water Heaters
IPC
Chapter 5
Water Heaters
2.7.5.1.1
The hot water shall be generated by electric water heater.
22 33 00
Electric Domestic Water Heaters
IPC
Chapter 5
Water Heaters
2.7.5.1.2
The unit shall be located inside a mechanical room, storage room, toilet/janitor room or similar type locked space.
22 33 00
Electric Domestic Water Heaters
IPC
Chapter 5
Water Heaters
2.7.5.1.3
The unit shall be of the commercially available tank type having low or medium watt density electric heating elements. Gas (natural or liquid propane) powered hot water generators shall be provided to satisfy large hot water requirements when economically justifiable and practical.
22 33 00
Electric Domestic Water Heaters
IPC
Chapter 5
Water Heaters
22 34 30
Residential Gas Domestic Water Heaters
IPC
2.7.5 2.7.5.1
2.7.5.1.4
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Section 502 Installation
Iraqi Specification Number
Iraqi Specification -
N/A
-
Section 3.2.9
Service Sinks
-
Section 3.2.9
Service Sinks
-
Section 9.3
Sanitary Fittings
-
Section 10.6
Manholes, Inspection Chambers and Gullies
Iraq Building Code Requirements for Reinforced Concrete AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Specification Description N/A
2.1.6 (Table 2.1)
Grade of Concrete
Section 3.2.11.15
Floor Drains
Section 3.2.11.15
Floor Drains
Section 9.3
Sanitary Fittings
Section 3.2.3.13
Building Drainage
Section 3.2.11.15
Floor Drains
Section 3.2.11.15
Floor Drains
N/A
N/A
N/A
N/A
N/A
N/A
- Section 11.6 and 11.7 Electric water Storage Heaters -
Section 11.2
Cold and Hot Water Distribution
-
Section 11.2
Cold and Hot Water Distribution
-
Section 11.2
Cold and Hot Water Distribution
-
N/A
N/A
Page 15 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.7.5.1.5
2.7.5.2
2.7.5.2.1
2.7.6 2.7.6.1
Statement of Requirements Definition All installed water heaters shall have a pressure relief valve installed.
Construction Specifications Institute (CSI) # 01 35 26
Construction Specifications Institute # Description
Code
Code #
Code Description
Governmental Safety Requirements
IPC
Section 504.4 Relief valve
Section 606.5 Water Pressure Booster Systems
Booster Pumps
22 11 23.13
Domestic Water Packaged Booster Pump
IPC
In the event that the water distribution system is not sufficient to provide building pressure, then booster pumps with hydro-pneumatic tanks shall be installed. Special Plumbing System Contractor shall plan and construct compressor air storage and distribution.
22 11 23.13
Domestic Water Packaged Booster Pump
IPC
22 15 00
General Service Packaged Air Compressors and Receivers
IPC
Section 606.5.1
Water Pressure Booster Systems Required
Iraqi Specification Number
Iraqi Specification
Iraq Ministry of Housing & Construction - Section 11.6 and 11.7 General and Technical Specifications of the Sanitary Works Section 11.5 Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction Section 11.5 General and Technical Specifications of the Sanitary Works
2.7.6.2
Waste-oil collection and storage
44 42 49
Water Treatment Oil/Grease Interceptors
IPC
2.7.6.3
Fuel-oil storage and distribution plumbing systems that are required for full performance of equipment and other operations in the Power Plant Sewage Treatment Facility
23 10 00
Facility Fuel Systems
IPC
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Section 1003 Interceptors and Separators Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Chapter 13 Fuel Oil Piping and Storage N/A
44 42 00
Water Treatment Equipment
IPC
Section 701.4 Sewage Treatment
44 41 13
Packaged Water Treatment Plant
IPC
01 43 26
Testing and Inspecting Agency Qualifications
IPC
Section 312 Tests and Inspections
22 13 13
Facility Sanitary Sewers
IPC
Section 702 Materials
01 45 23
Testing and Inspecting Services
IPC
Section 307 Structural Safety
Double wall Steel, Underground Storage tanks
IPC
Code Required Special Inspector Classifications
IPC
Double wall Steel, Underground Storage tanks
IPC
Testing and Inspecting Services
IPC
23 13 13.23
Glass-Fiber Reinforced Plastic, Underground Fuel-Oil storage Tanks
IPC
2.7.6.4
2.7.7 2.7.7 2.7.7.1
2.7.7.1
2.7.7.2
2.7.7.2
2.7.7.3
Special Waste Testing and Commissioning Waste or hazardous drainage from battery repair/charging areas shall be treated prior to entering the site’s general waste drainage system. After completing the work, the Contractor shall demonstrate that all plumbing systems operate to fully satisfy the function for which these systems have been designed. All drainage piping shall be acid resistant
The Contractor shall include tests for interlocks, safety cutouts and other protective devices to demonstrate safe operation Smaller battery rooms shall have waste treated using acid neutralizing tank.
IPC
23 13 13.13
2.7.7.3
Fully flush and sanitize system prior to final acceptance.
01 43 29
2.7.7.4
Waste oil storage tanks shall be provided for collection of waste oil in the power plant
23 13 13.13
2.7.7.4
Pressures test all lines for leaks.
2.7.7.5
Waste oil storage tank shall be underground double-wall fiberglass or double-wall steel.
01 45 23
MECHANICAL WORK:
23 00 00 23 00 00
HEATING, VENTILATING, AND AIRCONDITIONING (HVAC) HVAC
IMC
Heating Ventilating Air Conditioning:
2.8.00.01.01
Ventilation fans,
23 34 00
HVAC Fans
IMC
2.8.00.01.02
Air-conditioning systems utilizing packaged terminal Air Handling Units,
23 81 13
Package Terminal Air-Conditioners
IMC
2.8. 2.8.00.1
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Chapter 12 Special Piping and Storage System
IMC
Chapter 8
Chapter 8
Indirect/Special Waste
Indirect/Special Waste
Section 312 Tests and Inspections
Chapter 8
Indirect/Special Waste
Section 312 Tests and Inspections
Chapter 8
Indirect/Special Waste
Chapter 4, 5, Ventilation, Exhaust 6, 11 Systems, Duct Systems, Refrigeration Chapter 4 Ventilation
Section 312 Heating and Cooling Load Calculations
N/A
Section 10.6
N/A
Specification Description Electric water Storage Heaters Cold Water Service Boosting Plant Cold Water Service Boosting Plant N/A
Manholes, Inspection Chambers and Gullies N/A
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 10.6
Manholes, Inspection Chambers and Gullies
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Section 10.6
Manholes, Inspection Chambers and Gullies
Section 2.3
Cold Water Systems
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General
-
N/A
-
Section 2.3
-
N/A
-
Section 2.2
-
N/A
-
Section 2.3
-
N/A
N/A
Cold water Systems
N/A
Water Mains Test
N/A
Cold water Systems
N/A
4.2.14
Package Air Conditioner Unit
4.2.64
Centrifugal Power Supply Fan
4.2.14
Package Air Conditioner Unit
Page 16 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.8.01.03
Condensing Units,
Construction Specifications Institute (CSI) # 23 63 00
2.8.01.04
Air-handling units,
2.8.01.05
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Code Description
Refrigerant Condensers
IMC
Chapter 11 Refrigeration
23 30 00
HVAC Air Distribution
IMC
Chapter 6
Coils,
23 82 16
Air Coils
IMC
Chapter 11 Refrigeration
2.8.01.06
Piping,
23 23 00
Refrigerant Piping
IMC
Chapter 11 Refrigeration
2.8.01.07
Exhaust fans,
23 34 00
HVAC Fans
IMC
Chapter 5
2.8.01.08
Grills,
23 37 13
Diffusers, Registers, and Grilles
IMC
Section 603.17
2.8.01.09
Registers,
23 37 13
Diffusers, Registers, and Grilles
IMC
Chapter 6
Duct Systems
2.8.01.10
Ductwork,
23 32 00
Air Duct Accessories
IMC
Chapter 6
Duct Systems
2.8.01.11
Hangers,
23 32 00
Air Duct Accessories
IMC
Chapter 6
Duct Systems
2.8.01.12
Straps,
23 32 00
Air Duct Accessories
IMC
Chapter 6
Duct Systems
2.8.01.13
Fasteners,
23 32 00
Air Duct Accessories
IMC
Chapter 6
Duct Systems
2.8.02.01
The Contractor shall plan, supply, fabricate and install new ventilation system.
23 82 23
Unit Ventilators
IMC
Chapter 4
Ventilation
2.8.02.02
The Contractor shall plan, supply, fabricate and install new heating systems.
23 82 39
Unit Heaters
IMC
Section 920 Unit Heaters
Ventilators and Heaters,
23 82 00
Convection Heating and Cooling Units
IMC
Section 920 Heating and Cooling Load Calculations
2.8.03.01
Heating systems,
23 83 00
Radiant Heating Units
IMC
Section 920 Unit Heaters
2.8.03.02
Baseboard heaters,
23 83 13
Radiant Heating Electric Cables
IMC
Section 920 Unit Heaters
2.8.03.03
Resistance heaters in the A/C units may be substituted for electric baseboard heaters,
23 83 33
Electric Radiant Heaters
IMC
Section 920 Unit Heaters
2.8.03.04
ceiling fans,
23 34 00
HVAC Fans
IMC
2.8.03.05
Air conditioning,
23 81 16
Room Air-Conditioners
IMC
2.8.03.06
Toilet exhaust systems,
23 34 00
HVAC Fans
IMC
2.8.03.07
Electric heaters,
23 82 39
Unit Heaters
IMC
2.8.03
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Duct Systems
Exhaust System
Registers, grilles and diffusers
Section 503.2 Exhaust System
Section 312 Heating and Cooling Load Calculations Chapter 5
Exhaust System
Section 920 Unit Heaters
Iraqi Specification Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General
Iraqi Specification Number
Specification Description
4.2.18 g
Condensers
4.2.13 g
Evaporator and Condenser Fans
4.2.13 f
Evaporator and Condenser coils
4.2.18 h
Refrigerant pipe work
4.2.63
Centrifugal Roof Exhauster
4.2.45
Supply Air Diffuser
4.2.43
Supply Air Registers
4.2.40
Low Velocity Ductwork
4.2.47
Connections to Ductwork
4.2.47
Connections to Ductwork
4.2.47
Connections to Ductwork
4.2.61
Fans-Propeller Type (Wall Mounted)
4.2.14 i
Heaters
4.2.14 i
Heaters
4.2.14 i
Heaters
4.2.14 i
Heaters
4.2.14 i
Heaters
4.2.61
Fans-Propeller Type (Wall Mounted)
4.2.14
Package Air Conditioner Unit
4.2.63
Centrifugal Roof Exhauster
4.2.14 i
Heaters
Page 17 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.8.03.08
2.8.04
Statement of Requirements Definition Air conditioners/heat pumps in all enlisted quarters,
Construction Specifications Institute (CSI) # 23 82 00
Air Conditioners/heat pumps,
Construction Specifications Institute # Description
Code
Iraqi Specification Number
Specification Description
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.14
Package Air Conditioner Unit
4.2.14
Package Air Conditioner Unit
4.2.14
Package Air Conditioner Unit
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General
4.2.14
Package Air Conditioner Unit
4.2.61
Fans-Propeller Type (Wall Mounted)
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Section 605 Air Filters Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Section 401.6 Outdoor opening protection Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Chapter 4 Ventilation Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Chapter 4 Ventilation Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Section 605 Air Filters Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.60
Air Filters
4.2.60
Air Filters
Code #
Code Description
Convection Heating and Cooling Units
IMC
Section 312 Heating and Cooling Load Calculations
23 81 00
Decentralized Unitary HVAC Equipment
IMC
Section 312 Heating and Cooling Load Calculations Section 312 Heating and Cooling Load Calculations
2.8.04.01
Air Conditioners shall be window mounted type, shall be manually operated and enclosed in a protective vandal proof steel cage and mounted out of high traffic areas.
23 81 16
Room Air-Conditioners
IMC
2.8.04.02
Heat pumps shall be of the window mounted type, manually operated and enclosed in a protective vandal proof steel cage and mounted out of high traffic areas. Exhaust and Ventilation:
23 81 43
Air-Source Unitary Heat Pumps
IMC
23 30 00
HVAC Air Distribution
IMC
General: Criteria: FILTRATION:
N/A N/A 23 40 00
HVAC Air Cleaning Devices
IMC
2.8.1.2.01.01
Outside Air Intakes,
23 41 00
Particulate Air Filtration
IMC
2.8.1.2.01.02
Weatherproof louvers with a bird screen,
32 35 13
Screens and Louvers
IMC
2.8.1.2.01.03
Wall intakes,
23 37 00
Air Outlets and inlets
IMC
2.8.1.2.01.04
Roof hoods,
23 38 00
Ventilation Hoods
IMC
2.8.1.2.01.05
50mm thick permanent washable metal mesh type filters as first stage for filtration of dust. Medium efficiency (30 percent, as defined by ASHRAE 52 Dust Spot Efficiency Criteria) filters, the 50 mm (2 –inch) thick disposable panel type, shall be the second. VENTILATION AND EXHAUST FANS:
23 43 13
Washable Electronic Air Cleaners
IMC
23 34 00
HVAC Fans
IMC
23 34 16
Centrifugal HVAC Fans
IMC
2.8.1.2.02.02
All fans used for ventilation and pressurization shall be selected for required performance and for minimum noise level. Unit mounted supply and exhaust fans shall be centrifugal forward curved, backward inclined, or airfoil fans with non-overloading characteristics of high efficiency and quiet running plan. Gravity dampers,
23 33 13
Dampers
IMC
2.8.1.2.02.03
Vibration isolators,
23 37 23
HVAC Gravity Ventilators
IMC
Section 506.3.2.4
Vibration isolation
2.8.1.2.02.04
External lubricators,
23 37 23
HVAC Gravity Ventilators
IMC
accessories and controls necessary for specified sequence of operation.
23 37 23
HVAC Gravity Ventilators
IMC
Section 506.3.3 Chapter 5
Grease duct support
2.8.1.2.02.05
Administrative Areas: 34 CMH/person (20 CFM/person) with air conditioning; 37 CMH/m2 (2 CFM/Ft2) of floor area.
23 34 16
Centrifugal HVAC Fans
IMC
[F]502.5.2
Ventilation rate in rooms
2.8.1
2.8.1.1 2.8.1.2 2.8.1.2.01
2.8.1.2.02
2.8.1.2.02.01
2.8.1.2.03
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Chapter 9
Specific appliances, fireplaces and solid fuel burning equipment Chapter 4, 5 Ventilation and Exhaust Systems
Iraqi Specification
Section 605 Air Filters
Section 503 Ventilations rate in rooms
Chapter 4
Ventilation
Section Ventilation [B]513.10.4
Exhaust System
4.2.62 e
Bird Screen
4.2.52 b
Fresh air (Roof intakes)
4.2.54
Kitchen Exhaust Hoods
4.2.60
Air Filters
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.64
Centrifugal Power Supply Fan
4.2.64
Centrifugal Power Supply Fan
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General N/A
4.2.61f
Dampers
4.2.64f
Vibration Isolation
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General
4.2.63h
Controls
4.2.64 b
Centrifugal Power Supply Fan/Capacity
N/A
N/A
Page 18 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 2.8.1.2.04
Statement of Requirements Definition
Construction Specifications Institute (CSI) # 23 34 16
Construction Specifications Institute # Description
Code
Code #
Centrifugal HVAC Fans
IMC
[F]502.5.2
23 38 13
Commercial Kitchen Hoods
IMC
Electrical/Mechanical rooms: Mechanical ventilation sufficient to limit space temperature and to remove heat given out by operating equipment, 37 CMH/M2. Maintenance Shops: Maintenance Shops and similar spaces that use solvents and oils shall be provided with mechanical exhaust air systems. The systems shall consist of centrifugal fan, ductwork, exhaust grille, and interlock controls. These type spaces shall not return exhaust air to any split system unit or ventilation system.
23 34 16
Centrifugal HVAC Fans
23 34 16
2.8.1.2.07.01
Centrifugal fan,
2.8.1.2.07.02
Iraqi Specification
Specification Description
4.2.64 b
IMC
[F]502.5.2
4.2.64 b
Centrifugal HVAC Fans
IMC
503
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.63
Centrifugal Roof Exhauster
23 34 16
Centrifugal HVAC Fans
IMC
Chapter 4
Ventilation
4.2.64
Centrifugal Power Supply Fan
Ductwork,
23 31 00
HVAC Ducts and Casings
IMC
Chapter 6
Duct Systems
4.2.40
Low Velocity Ductwork
2.8.1.2.07.03
Exhaust grille,
23 37 13
Diffusers, Registers, and Grilles
IMC
Section 603.17
4.2.52
Fresh and Exhaust Air Louvers
2.8.1.2.07.04
Interlock controls,
23 33 00
Air Duct Accessories
IMC
Chapter 6
4.2.41e
Flexible Connections
23 35 00
Special Exhaust Systems
IMC
502.1.1
4.2.63
Centrifugal Roof Exhauster
2.8.1.2.08.01
Central Diesel Generator Facility: Per the calculations of the plan ENGINEER and approval of the COR. The facility shall be provided with mechanical exhaust air systems. The system shall consist of centrifugal fan, Ductwork,
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
23 33 00
Air Duct Accessories
IMC
Chapter 6
Duct Systems
4.2.40
Low Velocity Ductwork
2.8.1.2.08.02
Exhaust grille,
23 33 00
Air Duct Accessories
IMC
Chapter 6
Duct Systems
4.2.52
Fresh and Exhaust Air Louvers
2.8.1.2.08.03
Interlock,
23 33 00
Air Duct Accessories
IMC
Section 603.6.2
4.2.41e
Flexible Connections
Barracks: Air conditioning for officers and Senior NCO's only. Ceiling fans and adequate room ventilation for Junior NCO (jundis). Specific Requirements: Install ceiling fans in all rooms, with vibration mounts or hook-type suspension.
23 34 23
HVAC Power Ventilators
IMC
[F]502.5.2
Ventilations rate in rooms
4.2.61
Fans-Propeller Type (Wall Mounted)
23 34 23
HVAC Power Ventilators
IMC
[F]502.5.2
Ventilations rate in rooms
4.2.61
Fans-Propeller Type (Wall Mounted)
23 41 00
Particulate Air Filtration
IMC
605.3
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.60
Air Filters
23 34 16
Centrifugal HVAC Fans
IMC
[F]502.5.2
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.66
Utility Exhaust Fan
26 10 00
Medium-Voltage Electrical Distribution
NEC
Article 110 Requirements for Electrical Installation
2.8.1.2.06
2.8.1.2.07
2.8.1.2.08
2.8.1.2.09
2.8.1.3 2.8.1.3.01
2.8.1.3.02
2.8.1.3.03
2.8.2
To reduce sand and dirt migration, outside air intakes shall be located as high as possible within architectural constraints. The intakes shall be sized so that free air velocities are below 2.5 m/s (500 fpm). All fans used for ventilation and pressurization shall be selected for required performance and for minimum noise level. Unit mounted supply and exhaust fans shall be centrifugal forward curved, backward inclined, or airfoil fans with non-overloading characteristics of high efficiency and quiet running plan. Power Generation:
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Ventilation rate in rooms
Iraqi Specification Number
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Section 506 Commercial Kitchen Hood Iraq Ministry of Housing & Construction Ventilation system ducts and Technical Specification Book 4: exhaust equipment Mechanical Works_General
2.8.1.2.05
Toilet and Wash Areas: Exhaust ventilation at 37 CMH/m2 (2 CFM/Ft2) of floor area. Or 85 CMH/Water Closet or Urinal. Kitchen Hood Exhaust and Make-up air: As required and as per Kitchen plan specialist and equipment supplier requirements. Minimum requirements include requirements. Minimum requirements include hoods with exhaust fans and fire extinguishers over each cooking area
Code Description
Ventilation rate in rooms
Motors and Fans
Registers, grilles and diffusers Duct Systems
Exhaust Location
Flexible Air Connectors
Airflow over the filter
Ventilation rate in rooms
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General
4.2.54
Centrifugal Power Supply Fan/Capacity Kitchen Exhaust Hoods
Centrifugal Power Supply Fan/Capacity
N/A
Page 19 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
Versar International Assistance Projects
AFCEE Iraq Construction Guide Specifications Requirements Sorted by SOR
Statement of Requirements (SOR) Section 3.2.
3.2.01
3.2.02
Statement of Requirements Definition Fire Prevention: A minimum of one (1), 8 kg or greater, fire extinguisher per 100 square meters shall be provided.
Construction Specifications Institute (CSI) # 21 20 00
All fire extinguishers shall be mounted to the wall or placed in existing cabinets. Fire extinguishers shall be of the ABC type. Install commercial grade, hard wired electric and battery powered smoke alarms in all rooms and hallways.
Construction Specifications Institute # Description
Code
Code #
Code Description
Iraqi Specification
Ministry of Higher Education and Scientific Research - Electrical Specifications Carbon Dioxide Ministry of Higher Education and Extinguishing Systems Scientific Research - Electrical Specifications Smoke Alarms Ministry of Higher Education and Scientific Research - Electrical Specifications Means of Egress Ministry of Higher Education and Scientific Research - Electrical Specifications Fire Protection Systems Ministry of Higher Education and Scientific Research - Electrical Specifications Specification for Steel Iraq Building Code Requirements for Welded Reinforcement, Plain Reinforced Concrete Concrete Interior Floor Finish AFCEE IICS - Civil Work Specifications
IBC
Section 906 Portable Fire Extinguishers
41.1
Halon 1301 Cylinders
21 21 00
Carbon-Dioxide Fire-Extinguishing Systems
IBC
Section 902 [F]
41.1
Halon 1301 Cylinders
28 31 46
Smoke Detection Sensors
IBC
[F]907.2.8.3
41.6
Smoke Detectors
N/A
N/A
41
Fire Detection and Extinguishing System
Install emergency exit signs, in Arabic with international symbols, over primary fire exit routes.
26 53 00
Exit Signs
IBC
Chapter 10
3.2.1
Install commercial grade, hard wired electric and battery powered smoke alarms in all rooms and hallways.
28 31 00
Fire Detection and Alarm
IBC
Chapter 9
3.3.02
Non-load bearing shall be reinforced with 15 cm x 15 cm 12 gauge wire mesh or larger.
03 22 00
Welded Wire Fabric Reinforcing
ASTM
A 185-1
3.3.03
A broom type finish is expected unless otherwise requested. Expansion or control joints shall be placed in the concrete for a maximum slab size of approximately 3 m x 3 m.
03 25 36
Grooved Concrete Finish
IBC
Section 804
07 95 00
Expansion Control
IBC
Section 1906 Formwork, Embedded Pipes Iraq Building Code Requirements for and Construction Joints Reinforced Concrete
All block and brick walls, both solid and hollow core shall be placed with mortar on all surfaces in contact with adjacent block or brick. Placing the mortar after the block is positioned in place is unacceptable. Finished Flooring: All finished flooring shall be of terrazzo tile except for food preparation areas and bathroom floors.
04 20 00
Unit Masonry
IBC
Section 2103,2104
09 66 13
Portland Cement Terrazzo Flooring
IBC
3.3.05
3.4.00.01
3.4.00.02 4.01. 5.00.00
5.1.
5.2.
5.3.
All food preparation and bathroom finished floors shall be of glazed ceramic tile finish. The project includes all structures, buildings and systems as required for the installation. Submit all manufacturer’s documentation, training manuals and training procedures, quality control, safety, security, and environmental protection procedures to the Contracting Officer’s Representative (COR). At time of negotiations, the Contractor and COR will determine number and type of copies of each submittal required. The Contractor will submit these items at a time determined by the COR and the submission will be documented on the Contractors schedule. All submittals shall include a cover letter to the COR on or before the date indicated in the Contractor’s schedule. Submit reports as required by the COR on all project related issues to the COR. Submit the following to COR and Title II for review and approval: Preventive Maintenance Plan: The Contractor shall prepare a Preventive Maintenance Plan and submit it to the COR for review and approval. This plan shall identify manufacturer’s information and recommendations for preventive maintenance on all new equipment installed under this contract. Training Manuals: The Contractor will be responsible for providing a minimum 3 hours of training on each (1) HVAC, (2) Electrical, (3) Generator, (4) Plumbing, and (5) Fire Alarm systems. The Contractor shall provide Training Manuals for the components of these systems in English and Arabic. COR Submittals:
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Specification Description
Fire Extinguishing Systems
3.2.03
3.3.04
Iraqi Specification Number
04 21 16 N/A 01 33 00
01 78 23.19
01 79 00
Masonry Construction Material
5.10.2,5.10.4
N/A 4.5.1
Shrinkage and Temperature Reinforcement Movement Joints
AFCEE IICS - Civil Work Specifications
Chapter 6
Mortar
Section 804 Interior Floor Finish
AFCEE IICS - Civil Work Specifications
Chapter 12.12
Floors and surfaces
Section 804 Interior Floor Finish
AFCEE IICS - Civil Work Specifications
Chapter 12.13
Floors and surfaces
Ceramic Glazed Clay Masonry
IBC
N/A
N/A
Submittal Procedures
IBC
Section 106 Construction Documents
AFCEE IICS - Civil Work Specifications
1-9
General, Performed designer and which was performed.
Preventive Maintenance Instruction
IBC
Section 106 Construction Documents
AFCEE IICS - Civil Work Specifications
1-10
General, Sample of Material and Works
Demonstration and Training
IBC
Section 106 Construction Documents
N/A
N/A
N/A
N/A
N/A
Page 20 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
AFCEE Iraq Construction Guide Specifications
Versar International Assistance Projects
Requirements Sorted by SOR Statement of Requirements (SOR) Section 5.3.01
Statement of Requirements Definition Submit the following to the COR for review and approval:
Construction Specifications Institute (CSI) # 01 45 33
5.3.02
Construction Inspection Reports
01 45 33
5.3.03
Testing and Inspection Reports
01 45 33
5.3.04
Coordination Memoranda
01 45 33
6.00.00 6.01.
PLANNING STANDARDS: The Contractor must adhere to the International Building Code, International Electrical Code, International Mechanical Code, International Plumbing Code, International Fire Code and in any other standards specifically cited herein as applicable. The Contractor must provide copies of all specifications, calculations and manuals used. All calculations, standards and correspondence shall be in English The Contractor shall provide all site assessments and work plans with calculations and CADD drawings (where applicable). Provide as-built drawings, training manuals, warranties, preventive maintenance plans and operations and maintenance manuals, in English and Arabic. Provide 2 copies of legible operation and maintenance manuals for all new equipments, finishes, fixtures and hardware bound and cataloged in CSI format on A4 sized paper.
6.02.
6.03.
6.04.
6.06. 6.07.
7.1. 7.00.01
7.00.02
7.1.01 7.1.02
7.1.03
Follow "single manufacturer" premise for generators, pumps, valves, compressors, electrical components, etc. where possible for utility plants and critical infrastructure elements (WTPs, WWTPs, Power Plants, etc.) The contractor shall develop provisions for Wireless Computer Networks; consider including electrical outlets in hidden but accessible locations to power the duct-node computer networks like those found in hotels and office buildings. Explore opportunities to make manhole covers inaccessible to vehicle traffic or protect with bollards. The Contractor shall provide catalog cuts, supplier data, test reports and other information required by the COR during construction. Submittals shall clearly show that the materials or equipments supplied meet or exceed the specifications and project requirements. Concrete Requirements: CONSTRUCTION DRAWINGS: Provide shop drawings or a detailed Scope of Work for approval before construction proceeds. As-built drawings must reflect full details of items built. All buildings will be planned, designed, renovated, or constructed according to requirements and specifications. Iraqi standards or any other acceptable standards shall be implemented. Eastern and Western-style fixtures will be required and installed where indicated on construction drawings. All concrete shall have a minimum 28 day compressive strength of 21 MPa (3000 psi). Reinforce slabs with 15 cm x 15 cm 12 gauge steel wire mesh or larger. A broom type finish is expected unless otherwise requested.
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Construction Specifications Institute # Description Code-Required Procedures Code-Required Procedures Code-Required Procedures Code-Required Procedures
Special Inspections and
IBC
N/A
Special Inspections and
IBC
Section 1704 Special Inspection
AFCEE IICS - Civil Work Specifications
4-1 to 4-5
Special Inspections and
IBC
AFCEE IICS - Civil Work Specifications
1-7
Special Inspections and
IBC
Section 1715 Material and Testing Standards Section 106 Construction Documents
AFCEE IICS - Civil Work Specifications
1-7
Section 106 Construction Documents
AFCEE IICS - Civil Work Specifications
1-7
Construction Documents
AFCEE IICS - Civil Work Specifications
1-9, 1-10
Customer Requirement
N/A
N/A
N/A
N/A
N/A
N/A
Customer Requirement
Regulatory Requirements
IBC
01 33 23
Shop Drawings, Product Data and Samples
IBC
SEC 106
Customer Requirement
N/A
N/A
Data Communication s Wireless Access Point
NES
27 21 33
N/A
N/A
N/A General, Planning the Site General, Planning the Site General, Planning the Site General, Standard Specifications
Planning, Sample of Materials and Work
Customer Requirement
N/A
N/A
N/A
N/A
Submittal Procedures
IBC
AFCEE IICS - Civil Work Specifications
1-10
General, Sample of Material and Works
01 33 23
Shop Drawings, Product Data and Samples
IBC
AFCEE IICS - Civil Work Specifications
1-10
General, Sample of Material and Works
Customer Requirement
N/A
AFCEE IICS - Civil Work Specifications
1-7
Standard Specifications
03 31 00
Structural Concrete
IBC
03 22 00
Welded Wire Fabric Reinforcing
03 25 36
Grooved Concrete Finish
ASTM
IBC
N/A
Customer Requirement
N/A
01 33 00
N/A
N/A
Iraqi Specification
Specification Description
Code #
01 41 00
N/A
Code Description
Iraqi Specification Number
Code
Customer Requirement
Section 1905 Concrete Quality, Mixing and Placing A 185-1 Specification for Steel Welded Reinforcement, Plain Concrete Section 804 Interior Floor Finish
Iraq Building Code Requirements for Reinforced Concrete Iraq Building Code Requirements for Reinforced Concrete AFCEE IICS - Civil Work Specifications
2.1.6 (Table 2.1) 5.10.2,5.10.4
Grade of Concrete Shrinkage and Temperature Reinforcement
Page 21 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
VIAP Iraq
Versar International Assistance Projects
AFCEE Iraq Construction Guide Specifications Requirements Sorted by SOR
Statement of Requirements (SOR) Section 7.1.04
7.1.05
Statement of Requirements Definition The concrete shall be free from excessive voids or cracks when poured and be wetted sufficiently to avoid stress cracking due to excessive moisture loss. Provide test cylinders or cubes for every 20 cubic meter of concrete placed.
Construction Specifications Institute (CSI) # 03 39 00
Concrete Curing
IBC
Section 1905 Concrete Quality, Mixing and Iraq Building Code Requirements for Placing Reinforced Concrete
03 39 00
Concrete Curing
IBC
Section 1903, Specification for tests and 1905.6.2.3 Materials
Construction Specifications Institute # Description
Code
Code #
7.1.06
Compact soils on foundation to 95% maximum density determined by the Standard Proctor Method, ASTM D 698 before concrete is poured.
32 11 16
Sub base Course
IBC
J107.5
7.1.07
Place expansion or control joints in the concrete for a maximum slab size of 3 meters x 3 meters.
07 95 00
Expansion Control
IBC
1905.10.7
IBC,IEC, IPC, IMC, NES,NEC andASTM are all registered and copyrighted material.
Code Description
Iraqi Specification
Iraq Building Code Requirements for Reinforced Concrete
Compaction
AFCEE IICS - Civil Work Specifications
Construction Joints
Iraq Building Code Requirements for Reinforced Concrete
Iraqi Specification Number 2.3.3a, 3.2 to 3.4
2.2.5, 2.4.1
6-2, 6-3
4.5.1
Specification Description Exposure Conditions
Proportioning of Concrete Chapter 2, Digging Lengthened trenches for general services. Compaction) Movement Joints
Page 22 of 40 Versar © 2006 VIAP © 2006 This is a proprietary VIAP document. Any unauthorized use, distribution or copying of this document is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
01 33 00
5.00.00
01 33 00
6.07.
01 33 23
6.02.
01 33 23
7.00.01
01 35 26
2.7.5.1.5
01 41 00
2.4.1.3.4
01 41 00
2.5.3
01 41 00
2.7.1
01 41 00
6.01.
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Code Description
Submit all manufacturer’s documentation, training Submittal Procedures manuals and training procedures, quality control, safety, security, and environmental protection procedures to the Contracting Officer’s Representative (COR). At time of negotiations, the Contractor and COR will determine number and type of copies of each submittal required. The Contractor will submit these items at a time determined by the COR and the submission will be documented on the Contractors schedule. All submittals shall include a cover letter to the COR on or before the date indicated in the Contractor’s schedule. Submit reports as required by the COR on all project related issues to the COR. Submit the following to COR and Title II for review and approval:
IBC
Submittal Procedures The Contractor shall provide catalog cuts, supplier data, test reports and other information required by the COR during construction. Submittals shall clearly show that the materials or equipments supplied meet or exceed the specifications and project requirements. The Contractor shall provide all site assessments and work Shop Drawings, Product Data and plans with calculations and CADD drawings (where Samples applicable). Provide as-built drawings, training manuals, warranties, preventive maintenance plans and operations and maintenance manuals, in English and Arabic. Provide 2 copies of legible operation and maintenance manuals for all new equipments, finishes, fixtures and hardware bound and cataloged in CSI format on A4 sized paper.
IBC
CONSTRUCTION DRAWINGS: Provide shop drawings or a Shop Drawings, Product Data and Samples detailed Scope of Work for approval before construction proceeds. As-built drawings must reflect full details of items built. All installed water heaters shall have a pressure relief Governmental Safety Requirements valve installed.
IBC
IPC
Section 504.4
The Contractor shall ensure that the water supply and distribution system conform to International Plumbing Code. The Contractor shall ensure that the sanitary sewer system conforms to International Plumbing Code.
Regulatory Requirements
IPC
Chapter 6
Water Supply and Distribution
Regulatory Requirements
IPC
Chapter 7
Sanitary Drainage
The CONTRACTOR shall plan and construct domestic cold Regulatory Requirements water systems and the succeeding plumbing work in accordance with International Plumbing Code. The Contractor must adhere to the International Building Regulatory Requirements Code, International Electrical Code, International Mechanical Code, International Plumbing Code, International Fire Code and in any other standards specifically cited herein as applicable. The Contractor must provide copies of all specifications, calculations and manuals used. All calculations, standards and correspondence shall be in English
IPC
Chapter 6
Water Supply and Distribution
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Section 106 Construction Documents
IBC
IBC
SEC 106
Construction Documents
Relief valve
Section 106 Construction Documents
Page 23 of 40
Iraqi Specification
Iraqi Specification Number
Specification Description
AFCEE IICS - Civil Work Specifications
1-9
General, Performed designer and which was performed.
AFCEE IICS - Civil Work Specifications
1-10
General, Sample of Material and Works
AFCEE IICS - Civil Work Specifications
1-9, 1-10
Planning, Sample of Materials and Work
AFCEE IICS - Civil Work Specifications
1-10
General, Sample of Material and Works
Iraq Ministry of Housing & Construction - Section 11.6 and 11.7 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 1 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 9.1 General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Section 3.2.1 Conditions and Specifications
Electric water Storage Heaters
AFCEE IICS - Civil Work Specifications
General, Standard Specifications
1-7
General and Technical Specification of the Sanitary Work. Building Soil, Waste, Vent and Rain Water Pipe work. Scope of Work
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
01 43 13
2.7.3
01 43 23
2.7.2.1
01 43 26
2.4.1.3.8
01 43 26
2.4.3
01 43 26
2.5.6
01 43 26
2.7.7.1
01 43 29
2.7.7.3
01 45 23
2.7.7.2
01 45 23
2.7.7.4
01 45 33
5.3.01
01 45 33
5.3.02
01 45 33
5.3.03
01 45 33
5.3.04
01 78 23.19
5.1.
01 79 00
5.2.
02 01 80
2.00.03
Statement of Requirements Definition
All materials and equipment shall be standard product of a manufacturer regularly engaged in the manufacture of the product and shall duplicate items that have been in satisfactory use for at least two (2) years prior to bid opening. The plumbing systems shall be executed by a plumbing specialist sub-contractor experienced in the plan and construction of these types of systems. After completion of a section of water supply pipe the Contractor shall provide a static pressure test of the system. Any leaks shall be repaired and the section shall be retested prior to backfilling the trench covering the pipe. After completion of a water section, the CONTRACTOR shall provide a static pressure test of the system. Any leaks shall be repaired and the section shall be retested.
Construction Specifications Institute # Description
Code
Code #
Code Description
Iraqi Specification
Iraqi Specification Number
Specification Description
Manufacturer Qualification
IPC
Section 303 Materials
AL-FAO GEC - General Technical Conditions and Specifications
Installer Qualifications
IPC
Section 106 Permits
Testing and Inspecting Agency Qualifications
IPC
Section 312 Tests and Inspections
Iraq Ministry of Housing & Construction - Section 2.1 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 2.3 General and Technical Specifications of the Sanitary Works
Testing and Inspecting Agency Qualifications
IPC
Section 312 Tests and Inspections
Iraq Ministry of Housing & Construction - Section 2.3 General and Technical Specifications of the Sanitary Works
Testing and Inspecting Agency Qualifications
IPC
Section 312 Tests and Inspections
AL-FAO GEC - General Technical Conditions and Specifications
Testing and Inspecting Agency Qualifications
IPC
Section 312 Tests and Inspections
Iraq Ministry of Housing & Construction - Section 2.3 General and Technical Specifications of the Sanitary Works
Cold Water Systems
Code Required Special Inspector Classifications
IPC
Section 312 Tests and Inspections
Water Mains Test
Testing and Inspecting Services The Contractor shall include tests for interlocks, safety cutouts and other protective devices to demonstrate safe operation Pressures test all lines for leaks. Testing and Inspecting Services
IPC
Section 307 Structural Safety
IPC
Section 312 Tests and Inspections
Submit the following to the COR for review and approval: Code-Required Special Inspections and Procedures Construction Inspection Reports Code-Required Special Inspections and Procedures Testing and Inspection Reports Code-Required Special Inspections and Procedures Coordination Memoranda Code-Required Special Inspections and Procedures Preventive Maintenance Plan: The Contractor shall Preventive Maintenance Instruction prepare a Preventive Maintenance Plan and submit it to the COR for review and approval. This plan shall identify manufacturer’s information and recommendations for preventive maintenance on all new equipment installed under this contract. Training Manuals: The Contractor will be responsible for Demonstration and Training providing a minimum 3 hours of training on each (1) HVAC, (2) Electrical, (3) Generator, (4) Plumbing, and (5) Fire Alarm systems. The Contractor shall provide Training Manuals for the components of these systems in English and Arabic. Repair all walls, ceilings, overheads, and floors. Maintenance of Facility Remediation
IBC
Iraq Ministry of Housing & Construction - Section 2.2 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 2.3 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 2.3 General and Technical Specifications of the Sanitary Works N/A N/A
After completion of a section of sewer the Contractor shall provide a static pressure test of the system. Any leaks shall be repaired and the section shall be retested prior to backfilling of the trench. After completing the work, the Contractor shall demonstrate that all plumbing systems operate to fully satisfy the function for which these systems have been designed. Fully flush and sanitize system prior to final acceptance.
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
N/A
Customer Requirement
Section 3.2.1.8 Scope of Work
General Requirements
Cold Water Systems
Cold Water Systems
Section 3.1.21 Testing Gravity Sewers and Manholes
Cold water Systems
Cold water Systems
N/A
IBC
Section 1704 Special Inspection
AFCEE IICS - Civil Work Specifications
4-1 to 4-5
IBC
AFCEE IICS - Civil Work Specifications
1-7
IBC
Section 1715 Material and Testing Standards Section 106 Construction Documents
AFCEE IICS - Civil Work Specifications
1-7
IBC
Section 106 Construction Documents
AFCEE IICS - Civil Work Specifications
1-10
IBC
Section 106 Construction Documents
N/A
N/A
N/A
IBC
Section 3403 Additions, Alterations and Repairs
AFCEE IICS - Civil Work Specifications
2-1
General, Destruction of Establishments
Page 24 of 40
General, Planning the Site General, Planning the Site General, Planning the Site General, Sample of Material and Works
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
02 01 80
2.00.05
02 01 80
2.00.06
02 01 80
2.00.07
02 01 80
2.00.08
02 01 80
2.00.09
02 01 80
2.00.10
02 01 80
2.00.12
02 41 16.13
2.00.02
02 42 00
2.00.01
03 22 00
3.3.02
03 22 00
7.1.02
03 25 36
3.3.03
03 25 36
7.1.03
03 31 00
7.1.01
03 39 00
2.7.4.8.2
03 39 00
7.1.04
03 39 00
7.1.05
04 20 00
3.3.05
04 21 16
3.4.00.02
05 44 00
2.00.11
06 48 13
2.00.13
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Code Description
Iraqi Specification
Iraqi Specification Number
Specification Description
Eliminate dropped ceilings except where absolutely necessary for chase development of enveloping equipment (Exception: Those areas where mandated by HVAC loads such as a DFAC). Repair all damage to exterior and interior walls. Seal all open cracks on interior and exterior walls. Repair all concrete awnings.
Maintenance of Facility Remediation
IBC
Section 3403 Additions, Alterations and Repairs
AFCEE IICS - Civil Work Specifications
2-1
General, Destruction of Establishments
Maintenance of Facility Remediation
IBC
Alterations and
AFCEE IICS - Civil Work Specifications
2-1
of
Maintenance of Facility Remediation
IBC
Alterations and
AFCEE IICS - Civil Work Specifications
Remove all loose materials and patch to match existing building surface. Repair any supporting structure as required.
Maintenance of Facility Remediation
IBC
Alterations and
AFCEE IICS - Civil Work Specifications
Maintenance of Facility Remediation
IBC
Alterations and
AFCEE IICS - Civil Work Specifications
Clean and repair all tarred joints in the roofing slabs. Reseal all joints and make watertight. Test water tightness of roofing and wall openings. Enclose or fill in all existing openings in the walls, floors and ceilings with structurally stable material. All openings in the roof structure and exterior wall shall be made watertight. Completely remove all damaged floor tiles, ceiling tiles, window casements, doorframes, mechanical ductwork, straps, hangers, inserts, electrical boxes, and devices. Completely remove all debris, rubble, and trash in each building. Non-load bearing shall be reinforced with 15 cm x 15 cm 12 gauge wire mesh or larger.
Maintenance of Facility Remediation
IBC
Section 3403 Additions, Repairs Section 3403 Additions, Repairs Section 3403 Additions, Repairs Section 3403 Additions, Repairs Section 3403 Additions, Repairs
Alterations and
Iraq Building Code Requirements for Reinforced Concrete
Maintenance of Facility Remediation
IBC
Section 3403 Additions, Alterations and Repairs
AFCEE IICS - Civil Work Specifications
2-1
General, Destruction of Establishments
Demolition, Building Demolition
IBC
Section 3303 Demolition
AFCEE IICS - Civil Work Specifications
2-1
General, Destruction of Establishments
Removal and Salvage of Construction Material Welded Wire Fabric Reinforcing
IBC
AFCEE IICS - Civil Work Specifications
2-1
ASTM
Reinforce slabs with 15 cm x 15 cm 12 gauge steel wire mesh or larger.
Welded Wire Fabric Reinforcing
ASTM
A broom type finish is expected unless otherwise requested. A broom type finish is expected unless otherwise requested. All concrete shall have a minimum 28 day compressive strength of 21 MPa (3000 psi). Concrete shall have 21 MPa (3045 psi) as a specified minimum compressive strength in 28 days. The concrete shall be free from excessive voids or cracks when poured and be wetted sufficiently to avoid stress cracking due to excessive moisture loss. Provide test cylinders or cubes for every 20 cubic meter of concrete placed.
Grooved Concrete Finish
IBC
Section 3403 Additions, Alterations and Repairs A 185-1 Specification for Steel Welded Reinforcement, Plain Concrete A 185-1 Specification for Steel Welded Reinforcement, Plain Concrete Section 804 Interior Floor Finish
Grooved Concrete Finish
IBC
Section 804 Interior Floor Finish
AFCEE IICS - Civil Work Specifications
Structural Concrete
IBC
Concrete Curing
IBC
Concrete Curing
IBC
Section 1905 Concrete Quality, Mixing and Placing Tables Minimum Specified 1904.2.2(2) Compressive Strength Section 1905 Concrete Quality, Mixing and Placing
Iraq Building Code Requirements for Reinforced Concrete Iraq Building Code Requirements for Reinforced Concrete Iraq Building Code Requirements for Reinforced Concrete
Concrete Curing
IBC
Unit Masonry
IBC
Ceramic Glazed Clay Masonry
IBC
Section 804 Interior Floor Finish
AFCEE IICS - Civil Work Specifications
Cold Formed Metal Trusses
IBC
Section 2308 Conventional Light Frame Construction
AFCEE IICS - Civil Work Specifications
Interior Wood Door
IBC
Section 3403 Additions, Alterations and Repairs
AFCEE IICS - Civil Work Specifications
All block and brick walls, both solid and hollow core shall be placed with mortar on all surfaces in contact with adjacent block or brick. Placing the mortar after the block is positioned in place is unacceptable. All food preparation and bathroom finished floors shall be of glazed ceramic tile finish. Where possible, eliminate parapets from building vertices. Consider steel trussed roofs vs. poured roofs where procurement and cost of steel permits. Remove and replace all damaged interior doors.
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Section 1903, 1905.6.2.3 Section 2103,2104
Page 25 of 40
Iraq Building Code Requirements for Reinforced Concrete Iraq Building Code Requirements for Reinforced Concrete AFCEE IICS - Civil Work Specifications
Specification for tests and Materials
Iraq Building Code Requirements for Reinforced Concrete
Masonry Construction Material
AFCEE IICS - Civil Work Specifications
General, Destruction Establishments 2-1 General, Destruction Establishments 2-1 General, Destruction Establishments 2-1 General, Destruction Establishments 4.5, 4.4.5 and Movement Joints, 4.4.6 Laitance removal
of of of
General, Destruction of Establishments 5.10.2,5.10.4 Shrinkage and Temperature Reinforcement 5.10.2,5.10.4 Shrinkage and Temperature Reinforcement N/A
2.1.6 (Table Grade of Concrete 2.1) 2.1.6 (Table Grade of Concrete 2.1) 2.3.3a, 3.2 to Exposure Conditions 3.4 2.2.5, 2.4.1
Chapter 6
Proportioning of Concrete Mortar
Chapter 12.13 Floors and surfaces
2-1
General, Destruction of Establishments
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
06 48 16
2.00.13.03
07 72 23
2.3.9
07 72 23
2.7.4.10
07 95 00
3.3.04
07 95 00
7.1.07
08 10 00
2.00.13.10
08 11 00
Statement of Requirements Definition
Ensure all doorframes are flush with the wall and seams are sealed. Paint all interior doors and frames. Install wooden doors and door frames at all interior door locations. Vent system
Construction Specifications Institute # Description
Code
Wood Door Frames
IBC
Relief Vents
IPC
Provide vent line between last p-trap inside building and Relief Vents locate away from all entrances for the building Expansion or control joints shall be placed in the concrete Expansion Control for a maximum slab size of approximately 3 m x 3 m.
IPC IBC
Expansion Control
IBC
Doors and Frames
IBC
2.00.13.07
Place expansion or control joints in the concrete for a maximum slab size of 3 meters x 3 meters. All doors, frames, and hardware shall be commercial / institutional grade capable of withstanding heavy use. Main entrance door shall be steel and reinforced.
Metal Doors and Frames
08 11 00
2.00.13.08
All steel doors shall have steel frames.
08 13 00
2.00.13.01
08 14 00
2.00.13.02
08 14 00
2.00.13.05
08 91 26
2.00.13.06
09 30 00
2.3.22.1
09 30 13
2.3.22
09 66 13
3.4.00.01
09 91 13
2.00.13.09
09 91 23
2.00.13.04
10 21 16
2.3.22.3
10 26 19.16
2.3.23
21 20 00
3.2.
21 21 00
3.2.01
22 33 00
2.7.5.1
Code #
Code Description
Section 1008 Doors, Gates, Turnstiles
Chapter 9
Iraqi Specification
AFCEE IICS - Civil Work Specifications
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Chapter 9 Vents AL-FAO GEC - General Technical Conditions and Specifications Section 1906 Formwork, Embedded Pipes Iraq Building Code Requirements for and Construction Joints Reinforced Concrete
Chapter 16.16 Doors and Windows
Section 6
Pipe Work, Fittings and Installation
Section 3.2.3.13 4.5.1
Building Drainage
4.5.1
Movement Joints
Movement Joints
Section 1008 Doors, Gates, Turnstiles
Chapter 16.16 Doors and Windows
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16 Doors and Windows
Metal Doors and Frames
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16 Doors and Windows
Remove and replace all damaged exterior doors with insulated steel doors and frames. All necessary hardware, including locks, will be included for all doors. Ensure all doorframes are flush with the wall and seams are sealed. Paint all interior doors and frames. Install wooden doors and door frames at all interior door locations. Install wooden doors and door frames at all interior door locations. Mechanical room doors shall not have glass but will have a grated vent. Provide tile base on all walls.
Metal Doors
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16 Doors and Windows
Wood Doors
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16 Doors and Windows
Wood Doors
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16 Doors and Windows
Door Louvers
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
Chapter 16.16 Doors and Windows
Tiling
IBC
AFCEE IICS - Civil Work Specifications
Chapter 7
Latrine and shower walls, from floor to ceiling, shall receive ceramic tile. Finished Flooring: All finished flooring shall be of terrazzo tile except for food preparation areas and bathroom floors. Paint all steel doors and frames with the same system as specified for metal above. Paint all interior doors and frames.
Ceramic Tiling
IBC
AFCEE IICS - Civil Work Specifications
Chapter 11
Portland Cement Terrazzo Flooring
IBC
Section Walls 1210.2 Section Showers 1210.3 Section 804 Interior Floor Finish
Exterior Painting
IBC
Section 805 Decorations and Trim
AFCEE IICS - Civil Work Specifications
Interior Painting
IBC
Section 1008 Doors, Gates, Turnstiles
AFCEE IICS - Civil Work Specifications
IPC
Section 417 Showers
IBC
Section Bathroom Accessories 2606.9 Section 906 Portable Fire Extinguishers
AL-FAO GEC - General Technical Section Conditions and Specifications 3.2.11.8 AL-FAO GEC - General Technical Section Conditions and Specifications 3.2.11.8 41.1 Ministry of Higher Education and Scientific Research - Electrical Specifications Ministry of Higher Education and 41.1 Scientific Research - Electrical Specifications Iraq Ministry of Housing & Construction - Section 11.6 and 11.7 General and Technical Specifications of the Sanitary Works
All fire extinguishers shall be mounted to the wall or placed in existing cabinets. Fire extinguishers shall be of the ABC type. Water heaters
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
IBC
Carbon-Dioxide Fire-Extinguishing Systems
IBC
Electric Domestic Water Heaters
IPC
Construction Joints
Specification Description
Iraq Building Code Requirements for Reinforced Concrete AFCEE IICS - Civil Work Specifications
Shower units shall include a changing space and privacy Shower and Dressing Compartments enclosure. Latrine stalls shall receive a swinging door with barrel bolt Shower Doors closure. Fire Prevention: A minimum of one (1), 8 kg or greater, Fire Extinguishing Systems fire extinguisher per 100 square meters shall be provided.
1905.10.7
Vents
Iraqi Specification Number
Section 902 Carbon Dioxide [F] Extinguishing Systems
Page 26 of 40
Chapter 5
Water Heaters
AFCEE IICS - Civil Work Specifications
Construction Works
Finishing of Walls and Ceilings Chapter 12.12 Floors and surfaces
Chapter 16.16 Doors and Windows Showers Showers Halon 1301 Cylinders
Halon 1301 Cylinders
Electric water Storage Heaters
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
22 33 00
2.7.5.1.1
22 33 00
2.7.5.1.2
22 33 00
2.7.5.1.3
22 05 16
2.3.3
The unit shall be located inside a mechanical room, storage room, toilet/janitor room or similar type locked space. The unit shall be of the commercially available tank type having low or medium watt density electric heating elements. Fittings
22 05 29
2.3.4
Hangers
22 05 75
2.5.12
Cleanouts will be provided at each building.
22 07 19
2.3.14
22 07 19
2.7.1.1.4
22 11 00
2.4.
22 11 00
2.4.1.3.5
22 11 13
2.3.11
22 11 13
2.3.15
22 11 13
2.4.1
The CONTRACTOR shall repair and renovate the existing water supply and distribution system and provide a new water supply and distribution system where required.
22 11 13
2.4.4
Piping Materials
Facility Water Distribution Piping
IPC
22 11 13
2.7.1.1
Hot water systems
Facility Water Distribution Piping
IPC
Table 605.3, Piping Materials Table 605.4 and 605.5 Section 607 Hot Water Supply System
22 11 13
2.7.1.1.1
Facility Water Distribution Piping
IPC
Section 607 Hot Water Supply System
22 11 13
2.7.1.1.2
Facility Water Distribution Piping
IPC
22 11 13
2.7.1.1.3
Facility Water Distribution Piping
IPC
22 11 13
2.7.4.1.1
Hot water shall be provided for the facility to supply 49°C (120°F) hot water to fixtures and outlets requiring hot water. Hot water of a higher temperature shall be provided only where required for special use or process. Hot water piping shall be routed parallel to the building lines and concealed within finished rooms. The CONTRACTOR will plan the overall water supply and distribution system for the base population.
Facility Water Distribution Piping
IPC
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
The hot water shall be generated by electric water heater. Electric Domestic Water Heaters
IPC
Chapter 5
Water Heaters
Electric Domestic Water Heaters
IPC
Chapter 5
Water Heaters
Electric Domestic Water Heaters
IPC
Chapter 5
Water Heaters
Expansion Fittings and Loops for Plumbing
IPC
Section 702.4
Hangers and Support for Plumbing Piping and Equipment Facility Drainage Piping Cleanouts
IPC
Table 308.5 Hanger Spacing
IPC
Section 708 Cleanouts
Insulation shall be provided where required to control sweating of pipes.
22 07 19 Plumbing Piping Insulation
IPC
All hot water piping shall be insulated.
Plumbing Piping Insulation
IPC
Water Supply & Distribution:
Facility Water Distribution
IPC
Chapter 6
Water Supply and Distribution
The Contractor shall provide a new water supply and distribution system as needed.
Facility Water Distribution
IPC
Chapter 6
Water Supply and Distribution
IPC
Chapter 6
Water Supply and Distribution
Domestic and cold water shall be provided in the facilities Facility Water Distribution Piping to serve the water heater usage and plumbing fixtures provided for the facility. Domestic water shall be distributed by means of schedule Facility Water Distribution Piping 40 galvanized steel pipe or suitable high pressure PVC equivalent. Note: the contractor shall provide galvanized Schedule 40 plumbing for sinks, showers, and toilets.
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Facility Water Distribution Piping
IPC
Section 607.2.1
Code Description
Fittings
Piping Insulation
Section 607 Hot Water Supply System
Section 605 Materials, Joints and Connections
IPC
Chapter 6
Water Supply and Distribution Chapter 6 Water Supply and Distribution Section 604 Design of Building Water Distribution System
Page 27 of 40
Chapter 6
Water Supply and Distribution
Iraqi Specification Number
Iraqi Specification
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
- Section 11.2
Cold and Hot Water Distribution
- Section 11.2
Cold and Hot Water Distribution
- Section 11.2
Cold and Hot Water Distribution
- Section 9.3
Sanitary Fittings
Section 3.2.4.3 Piping Pipe Cleanouts
-
Section 3.2.11.12 Section 8
-
Section 8
Thermal Insulation
-
Section 11
-
Section 1
Water Supply Main, Distribution, Service Pipes and Equipments General and Technical Specification of the Sanitary Work. Main Supply Distribution
- Section 11.1
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
Specification Description
Thermal Insulation
Section 3.3.2 Service and Distribution Pipes.
Section 1
General and Technical Specification of the Sanitary Work.
Section 3.1.10 Pipe work
Iraq Ministry of Housing & Construction - Section 11.2 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 11.2 General and Technical Specifications of the Sanitary Works N/A N/A
Cold and Hot Water Distribution Cold and Hot Water Distribution N/A
AL-FAO GEC - General Technical Section 3.2.4.2 Piping Conditions and Specifications N/A N/A Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
22 11 13
2.7.4.1.2
22 11 23.13
2.7.5.2
22 11 23.13
2.7.5.2.1
22 13 00
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Code Description
Provide water pressure of 1.5 bars to the highest point in Facility Water Distribution Piping each building.
IPC
Booster Pumps
Domestic Water Packaged Booster Pump
IPC
Section 606.5
Water Pressure Booster Systems
Domestic Water Packaged Booster Pump
IPC
Section 606.5.1
Water Pressure Booster Systems Required
2.7.1.2
In the event that the water distribution system is not sufficient to provide building pressure, then booster pumps with hydro-pneumatic tanks shall be installed. Sanitary waste system.
Facility Sanitary Sewerage
IPC
Chapter 7
22 13 13
2.7.1.3
Drains
Sanitary Drains
IPC
Section 412 Floor and Trench Drains
22 13 13
2.7.7.2
All drainage piping shall be acid resistant
Facility Sanitary Sewers
IPC
Section 702 Materials
22 13 16
2.3.00.1
IPC
Section 701 General
22 13 16
2.3.2
Renovate the existing and/or install a new and complete Sanitary Waste and Vent Piping building sanitary sewer system to include all piping, fittings, hangers, straps, flanges, traps, vents, drains and fixtures. Piping Sanitary Waste and Vent Piping
IPC
Section 702 Materials
22 13 16
2.7.1.4
Vent system
Sanitary Waste and Vent Piping
IPC
22 13 19.13
2.3.7
Drains
Sanitary Drains
IPC
Section 412 Floor and Trench Drains
22 13 19.13
2.7.4.9
Floor or Shower Drain
Sanitary Drains
IPC
Section 412 Floor and Trench Drains
22 13 19.13
2.7.4.9.1
Sanitary Drains
IPC
Section 412 Floor and Trench Drains
22 13 19.33
2.3.6
Cast iron construction with galvanized body, integral seepage pan, and adjustable perforated or slotted chromium plated bronze, nickel-bronze or nickel brass strainer consisting of a grate and threaded collar. Valves
Backwater Valves
IPC
Section 715 Backwater Valves
22 14 00
2.6.1
Facility Storm Drainage
IPC
Chapter 11 Storm Drainage
22 14 00
2.6.2
Facility Storm Drainage
IBC
22 14 00
2.6.3
Facility Storm Drainage
IPC
Chapter 11 Storm Drainage
AL-FAO GEC - General Technical Conditions and Specifications
22 14 26.19
2.7.4.11
The CONTRACTOR shall conduct a complete site investigation and field check in order to fully research and document the existing site storm water management and drainage system. The CONTRACTOR shall map out all existing conditions. With this information, CONTRACTOR shall plan an overall comprehensive site storm water management and drainage plan. The CONTRACTOR shall incorporate the existing storm water management system, if applicable, into the new plan in order to ensure that the entire installation is provided with the most efficient drainage system available and that redundant work is not performed. Trench Drain
Facility Trench drains
IPC
Section 412 Floor and Trench Drains
22 14 26.19
2.7.4.11.1
Cast iron construction with galvanized body, integral seepage pan, and adjustable perforated or slotted chromium plated bronze, nickel-bronze, or nickel brass strainer consisting of a grate and threaded collar.
Facility Trench drains
IPC
Section 412 Floor and Trench Drains
AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Section 604 Design of Building Water Distribution System
Chapter 9
Sanitary Drainage
Vents
Iraqi Specification Number
Iraqi Specification
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
-
N/A
Specification Description N/A
- Section 11.5
Cold Water Service Boosting Plant
- Section 11.5
Cold Water Service Boosting Plant
- Section 9.1
Building Soil, Waste, Vent and Rain Water Pipe work. Floor Drains
-
Section 3.2.11.15 N/A
-
Chapter 9
Building Drainage and Sanitary Fittings
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications
Chapter 9
Building Drainage and Sanitary Fittings
Section 6
Pipe Work, Fittings and Installation
Section 3.2.11.15 Section 3.2.11.15 Section 3.2.11.15
Floor Drains
N/A
Floor Drains Floor Drains
Iraq Ministry of Housing & Construction - Section 7.1 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 9.1 General and Technical Specifications of the Sanitary Works
Building Soil, Waste, Vent and Rain Water Pipe work.
Section 1803 Excavation, Grading and Fill Iraq Ministry of Housing & Construction - Section 9.1 General and Technical Specifications of the Sanitary Works
Building Soil, Waste, Vent and Rain Water Pipe work.
Page 28 of 40
Valves and Strainers
Section 3.1.5 Existing Service
Section 3.2.11.15 Section 3.2.11.15
Floor Drains Floor Drains
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
22 15 00
2.7.6.1
Contractor shall plan and construct compressor air storage and distribution.
22 33 00
2.3.16
22 34 30
2.7.5.1.4
22 40 00
Statement of Requirements Definition
Construction Specifications Institute # Description
Code #
Code Description
IPC
Chapter 12 Special Piping and Storage System
The hot water shall be generated by electric water heaters Electric Domestic Water Heaters
IPC
Chapter 5
Gas (natural or liquid propane) powered hot water Residential Gas Domestic Water Heaters generators shall be provided to satisfy large hot water requirements when economically justifiable and practical.
IPC
2.3.10
Plumbing Fixtures
Plumbing Fixtures
IPC
22 40 00
2.7.4.2
Plumbing Fixtures
Plumbing Fixtures
IPC
Fixtures, Faucets and Fixture Fittings Section 402 Fixture Materials
22 41 13
2.7.4.2.1
Eastern Water Closet with flush tank assembly
IPC
Section 420 Water Closets
22 41 13
2.7.4.2.1.1
IPC
Section 402 Fixture Materials
22 41 16
2.7.4.3
Residential Water Closets, Urinals and Bidets Residential Water Closets, Urinals and Bidets Residential Lavatories and Sinks
IPC
Section 416 Lavatories
22 41 16
2.7.4.3.1
Residential Lavatories and Sinks
IPC
Section 416 Lavatories
22 41 16
2.7.4.4
Enameled cast iron, wall or counter mounted. Brass fittings provided for water supplies. In addition to lavatories, a combination foot and hand washing station will be provided. This should be a concrete trough assembly covered with ceramic tile. Mop Sink
Residential Lavatories and Sinks
IPC
Section 427 Floor Sinks
22 41 16
2.7.4.4.1
Residential Lavatories and Sinks
IPC
Section 427 Floor Sinks
22 41 16
2.7.4.7
Floor mounted enameled cast iron with copper alloy rim guard. Provide hot and cold-water valves with manual mixing. Faucet handles shall be copper alloy. Service Sink
Residential Lavatories and Sinks
IPC
Section 418 Sinks
22 41 16
2.7.4.7.1
Residential Lavatories and Sinks
IPC
Section 418 Sinks
22 41 23
2.7.4.5
Standard trap type, enameled cast iron. Service sinks provided in maintenance areas shall be metallic, and in battery rooms acid resistant. Shower
IPC
Section 417 Showers
22 41 23
2.7.4.5.1
IPC
Section 424 Faucets and other Fixture Fittings
22 41 23
2.7.4.5.2
22 41 23
2.3.19
22 42 13
2.3.20
22 42 39
2.3.8
Enameled cast iron, recessed floor mounted. Lavatories
General Service Packaged Air Compressors and Receivers
Code
Residential Showers Receptors and Basin Showerhead and faucet handles shall be copper alloy. Residential Showers Receptors and Provide for manual mixing with hot and cold-water valves. Basin
Water Heaters
Section 502 Installation
Chapter 4
N/A Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 11.2 General and Technical Specifications of the Sanitary Works N/A Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications
Specification Description N/A
Cold and Hot Water Distribution N/A
Section 3.2.11 Plumbing Fixtures - Section 9.3
Sanitary Fittings
Section 3.2.11 Plumbing Fixtures Section 3.2.11 Plumbing Fixtures - Section 9.3
Sanitary Fittings
- Section 9.3
Sanitary Fittings
- Section 9.3
Sanitary Fittings
- Section 9.3
Sanitary Fittings
- Section 3.2.9 Service Sinks
- Section 3.2.9 Service Sinks
Section 3.2.11.8 Section 3.2.11.8 N/A
Showers Showers
N/A
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
Section 3.2.11.8
Showers
Section 420 Water Closets
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.2.11.5
Eastern Water Closets
Section 424 Faucets and other Fixture Fittings
Iraq Ministry of Housing & Construction - Section 9.4 General and Technical Specifications of the Sanitary Works
Shower head riser pipe shall be schedule 40 galvanized steel.
Residential Showers Receptors and Basin
IPC
Section 605 Materials Joints and Connections
Install showers to include all piping, faucets, drains and concrete or tile work. Shower pan shall be lowered so all water on shower floor will run into the shower pan. Install Eastern style toilets and sinks (provision of concrete trough in barracks for the feet/hand wash/laundry). Include all piping and hardware to make the units functional. Faucets
Residential Shower Receptors and Basin
IPC
Section 417 Showers
Commercial Water Closets, Urinals and Bidets
IPC
Commercial Faucets Supplies, and Trim
IPC
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Iraqi Specification Number
Iraqi Specification
Page 29 of 40
Sanitary Fittings
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
22 45 13
2.7.4.6
Emergency Shower
Emergency Showers
IPC
Section 411 Emergency Showers and Eyewash Stations
22 45 16
2.7.4.6.1
Eye Wash Assembly
Eyewash Equipment
IPC
Section 411 Emergency Showers and Eyewash Stations
22 45 33
2.7.4.6.2
Provide in Vehicle Maintenance Building and in other facilities where required.
Combination Emergency Fixtures
IPC
N/A
22 45 36
2.3.24
Hose connects with appropriate piping shall be provided in Hand-held Emergency Drench Hoses each latrine/shower facility.
IPC
Section 424.4
22 61 00
2.7.4.00.1
Compressed Air Systems:
IMC
Section 1003 Pressure Vessels
22 61 00
2.7.4.01.05
IMC
Section 1003 Pressure Vessels
22 61 00
2.7.4.01.06
Compressed-Air Systems for Laboratory and Healthcare Facilities Compressed air system shall be capable of operation up to Compressed-Air Systems for Laboratory 1380 KPa (200 psig) maximum for 862 KPa (125 psig) and Healthcare Facilities normal units. High-pressure system (above 1380 KPa) shall be provided Compressed-Air Systems for Laboratory to supply compressed air to equipment where required. and Healthcare Facilities
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works N/A
IMC
22 61 00
2.7.4.01.08
The air distribution system shall be provided with necessary regulator valves to maintain desired pressure.
Compressed-Air Systems for Laboratory and Healthcare Facilities
IMC
23 00 00
2.8.
MECHANICAL WORK:
IMC
23 00 00
2.8.00.1
HEATING, VENTILATING, AND AIRCONDITIONING (HVAC) HVAC
23 05 29
2.3.5
Hangers and Support for Plumbing Piping and Equipment
IPC
23 10 00
2.7.6.3
23 11 13
2.3.12
23 11 13
2.4.2
23 11 13
2.4.4.1
23 13 00
2.7.1.6
23 13 13.13
2.7.7.3
23 13 13.13
2.7.7.4
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Code Description
Iraqi Specification Number
Iraqi Specification
Specification Description
-
N/A
N/A
-
N/A
N/A
-
N/A
N/A
-
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Section 1003 Pressure Vessels
N/A
N/A
N/A
Section 1003 Pressure Vessels
N/A
N/A
N/A
N/A
Hose Connected Outlets
Facility Fuel Systems Fuel-oil storage and distribution plumbing systems that are required for full performance of equipment and other operations in the Power Plant Water service to each facility shall enter the building in a Facility Water Distribution Piping mechanical, storage, or similar type space. Isolation valves shall be installed at each facility and to separate latrine/shower area. The CONTRACTOR shall inspect all existing underground Facility Water Distribution Piping water piping and manholes for damage and defects. The CONTRACTOR shall repair all damaged and defective underground water piping as necessary.
IPC
Iraq Ministry of Housing & Construction 4.2.14 Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction - Section 6.2 General and Technical Specifications of the Sanitary Works Chapter 13 Fuel Oil Piping and Storage N/A N/A
IPC
Chapter 6
Water Supply and Distribution
Iraq Ministry of Housing & Construction - Section 11.1 General and Technical Specifications of the Sanitary Works
Main Supply Distribution
IPC
Chapter 6
Water Supply and Distribution
Iraq Ministry of Housing & Construction - Section 2.1 General and Technical Specifications of the Sanitary Works
General Requirements
Domestic water shall be distributed by means of standard Facility Water Distribution Piping weight (schedule 40) galvanized steel pipe that is installed underground with a minimum of 80cm coverage of compacted soil. Fuel oil storage and distribution Facility Fuel Storage Tanks
IPC
Heating Ventilating Air Conditioning:
Straps
IMC
Chapter 4, 5, Ventilation, Exhaust 6, 11 Systems, Duct Systems, Refrigeration Section 308 Piping Support
Table 605.3, Piping Materials Table 605.4 and 605.5
AL-FAO GEC - General Technical Conditions and Specifications
Package Air Conditioner Unit Pipe Supports
N/A
Section 3.1.10 Pipe work
IMC
Chapter 13 Fuel Oil Piping and Storage N/A
N/A
N/A
Smaller battery rooms shall have waste treated using acid Double wall Steel, Underground Storage neutralizing tank. tanks
IPC
Chapter 8
Indirect/Special Waste
N/A
N/A
Waste oil storage tanks shall be provided for collection of Double wall Steel, Underground Storage waste oil in the power plant tanks
IPC
Chapter 8
Indirect/Special Waste
N/A
N/A
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Page 30 of 40
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
23 13 13.23
2.7.7.5
Waste oil storage tank shall be underground double-wall fiberglass or double-wall steel.
23 13 16
2.3.2.1
23 13 19.13
2.3.7.1
23 23 00
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Glass-Fiber Reinforced Plastic, Underground Fuel-Oil storage Tanks
IPC
Chapter 8
Waste lines from toilets will be a minimum of 100mm diameter and slope a minimum of 2%.
Sanitary Waste and Vent Piping
IPC
Section 704
Sanitary Drains
IPC
Section 412
2.8.01.06
Floor drains shall be provided in each room that contains a water source Piping,
Refrigerant Piping
IMC
Chapter 11
23 30 00
2.8.01.04
Air-handling units,
HVAC Air Distribution
IMC
Chapter 6
23 30 00
2.8.1
Exhaust and Ventilation:
HVAC Air Distribution
IMC
Chapter 4, 5
23 31 00
2.8.1.2.07.02
Ductwork,
HVAC Ducts and Casings
IMC
Chapter 6
23 32 00
2.8.01.10
Ductwork,
Air Duct Accessories
IMC
Chapter 6
23 32 00
2.8.01.11
Hangers,
Air Duct Accessories
IMC
Chapter 6
23 32 00
2.8.01.12
Straps,
Air Duct Accessories
IMC
Chapter 6
23 32 00
2.8.01.13
Fasteners,
Air Duct Accessories
IMC
Chapter 6
23 33 00
2.3.17
Electric Domestic Water Heaters
IPC
Section 501.4
23 33 00
2.8.1.2.07.04
The storage unit shall be typically located inside the mechanical room, storage room, janitor room or similar type space. Interlock controls,
Air Duct Accessories
IMC
Chapter 6
23 33 00
2.8.1.2.08.01
Ductwork,
Air Duct Accessories
IMC
Chapter 6
23 33 00
2.8.1.2.08.02
Exhaust grille,
Air Duct Accessories
IMC
Chapter 6
23 33 00
2.8.1.2.08.03
Interlock,
Air Duct Accessories
IMC
Section 603.6.2
23 33 13
2.8.1.2.02.02
Gravity dampers,
Dampers
IMC
Section [B]513.10.4
23 34 00
2.8.00.01.01
Ventilation fans,
HVAC Fans
IMC
Chapter 4
23 34 00
2.8.01.07
Exhaust fans,
HVAC Fans
IMC
Chapter 5
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Page 31 of 40
Code Description
Iraqi Specification
Iraqi Specification Number
N/A Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Section Drainage Piping Installation AL-FAO General Engineering Company 3.2.3.12 General Technical Conditions and Specifications Section Floor and Trench Drains AL-FAO GEC - General Technical 3.2.11.15 Conditions and Specifications Refrigeration Iraq Ministry of Housing & Construction 4.2.18 h Technical Specification Book 4: Mechanical Works General Duct Systems Iraq Ministry of Housing & Construction 4.2.13 g Technical Specification Book 4: Mechanical Works General Ventilation and Exhaust Iraq Ministry of Housing & Construction 4.2.61 Systems Technical Specification Book 4: Mechanical Works General Duct Systems Iraq Ministry of Housing & Construction 4.2.40 Technical Specification Book 4: Mechanical Works General 4.2.40 Duct Systems Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Duct Systems Iraq Ministry of Housing & Construction 4.2.47 Technical Specification Book 4: Mechanical Works General 4.2.47 Duct Systems Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General 4.2.47 Duct Systems Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Location Iraq Ministry of Housing & Construction - Section 11.6 and 11.7 General and Technical Specifications of the Sanitary Works Duct Systems Iraq Ministry of Housing & Construction 4.2.41e Technical Specification Book 4: Mechanical Works General Duct Systems Iraq Ministry of Housing & Construction 4.2.40 Technical Specification Book 4: Mechanical Works General Duct Systems Iraq Ministry of Housing & Construction 4.2.52 Technical Specification Book 4: Mechanical Works General Flexible Air Connectors Iraq Ministry of Housing & Construction 4.2.41e Technical Specification Book 4: Mechanical Works General 4.2.61f Ventilation Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Ventilation Iraq Ministry of Housing & Construction 4.2.64 Technical Specification Book 4: Mechanical Works General Exhaust System Iraq Ministry of Housing & Construction 4.2.63 Technical Specification Book 4: Mechanical Works General Indirect/Special Waste
Specification Description N/A
Drainage and Vent Pipes
Floor Drains Refrigerant pipe work
Evaporator and Condenser Fans Fans-Propeller Type (Wall Mounted) Low Velocity Ductwork
Low Velocity Ductwork
Connections to Ductwork Connections to Ductwork Connections to Ductwork Electric Storage Water Heater Flexible Connections
Low Velocity Ductwork
Fresh and Exhaust Air Louvers Flexible Connections
Dampers
Centrifugal Power Supply Fan Centrifugal Roof Exhauster
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
23 34 00
2.8.03.04
ceiling fans,
23 34 00
2.8.03.06
23 34 00
2.8.1.2.02
23 34 16
2.8.1.2.02.01
23 34 16
2.8.1.2.03
23 34 16
2.8.1.2.04
23 34 16
2.8.1.2.06
23 34 16
2.8.1.2.07
23 34 16
2.8.1.2.07.01
23 34 16
2.8.1.3.03
23 34 23
2.8.1.2.09
23 34 23
2.8.1.3.01
23 35 00
2.8.1.2.08
23 37 00
2.8.1.2.01.03
23 37 13
2.8.01.08
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
HVAC Fans
IMC
Section 503.2
Exhaust System
Toilet exhaust systems,
HVAC Fans
IMC
Chapter 5
Exhaust System
VENTILATION AND EXHAUST FANS:
HVAC Fans
IMC
All fans used for ventilation and pressurization shall be selected for required performance and for minimum noise level. Unit mounted supply and exhaust fans shall be centrifugal forward curved, backward inclined, or airfoil fans with non-overloading characteristics of high efficiency and quiet running plan. Administrative Areas: 34 CMH/person (20 CFM/person) with air conditioning; 37 CMH/m2 (2 CFM/Ft2) of floor area. Toilet and Wash Areas: Exhaust ventilation at 37 CMH/m2 (2 CFM/Ft2) of floor area. Or 85 CMH/Water Closet or Urinal. Electrical/Mechanical rooms: Mechanical ventilation sufficient to limit space temperature and to remove heat given out by operating equipment, 37 CMH/M2. Maintenance Shops: Maintenance Shops and similar spaces that use solvents and oils shall be provided with mechanical exhaust air systems. The systems shall consist of centrifugal fan, ductwork, exhaust grille, and interlock controls. These type spaces shall not return exhaust air to any split system unit or ventilation system.
Centrifugal HVAC Fans
IMC
Chapter 4
Centrifugal HVAC Fans
IMC
[F]502.5.2 Ventilation rate in rooms
Centrifugal HVAC Fans
IMC
[F]502.5.2 Ventilation rate in rooms
Centrifugal HVAC Fans
IMC
[F]502.5.2 Ventilation rate in rooms
Centrifugal HVAC Fans
IMC
503
Centrifugal HVAC Fans
IMC
Chapter 4
IMC
[F]502.5.2 Ventilation rate in rooms
IMC
[F]502.5.2 Ventilations rate in rooms
IMC
[F]502.5.2 Ventilations rate in rooms
Centrifugal fan,
Centrifugal HVAC Fans All fans used for ventilation and pressurization shall be selected for required performance and for minimum noise level. Unit mounted supply and exhaust fans shall be centrifugal forward curved, backward inclined, or airfoil fans with non-overloading characteristics of high efficiency and quiet running plan. HVAC Power Ventilators Barracks: Air conditioning for officers and Senior NCO's only. Ceiling fans and adequate room ventilation for Junior NCO (jundis). Install ceiling fans in all rooms, with vibration mounts or HVAC Power Ventilators hook-type suspension.
Section 503 Ventilations rate in rooms
Central Diesel Generator Facility: Per the calculations of the plan ENGINEER and approval of the COR. The facility shall be provided with mechanical exhaust air systems. The system shall consist of centrifugal fan, Wall intakes,
Special Exhaust Systems
IMC
502.1.1
Air Outlets and inlets
IMC
Chapter 4
Grills,
Diffusers, Registers, and Grilles
IMC
Section 603.17
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Code Description
Page 32 of 40
Ventilation
Motors and Fans
Ventilation
Exhaust Location
Ventilation
Registers, grilles and diffusers
Iraqi Specification
Iraqi Specification Number
Specification Description
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.61
Fans-Propeller Type (Wall Mounted)
4.2.63
Centrifugal Roof Exhauster
4.2.64
Centrifugal Power Supply Fan
4.2.64
Centrifugal Power Supply Fan
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.64 b
Centrifugal Power Supply Fan/Capacity
4.2.64 b
Centrifugal Power Supply Fan/Capacity
4.2.64 b
Centrifugal Power Supply Fan/Capacity
4.2.63
Centrifugal Roof Exhauster
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.64
Centrifugal Power Supply Fan
4.2.66
Utility Exhaust Fan
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works_General
4.2.61
Fans-Propeller Type (Wall Mounted)
4.2.61
Fans-Propeller Type (Wall Mounted)
4.2.63
Centrifugal Roof Exhauster
Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General
4.2.52 b
4.2.45
Fresh air (Roof intakes)
Supply Air Diffuser
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
23 81 43
2.8.04.02
23 82 00
2.8.03
23 82 00
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Chapter 9
Heat pumps shall be of the window mounted type, manually operated and enclosed in a protective vandal proof steel cage and mounted out of high traffic areas. Ventilators and Heaters,
Air-Source Unitary Heat Pumps
IMC
Convection Heating and Cooling Units
IMC
2.8.03.08
Air conditioners/heat pumps in all enlisted quarters,
Convection Heating and Cooling Units
23 82 16
2.8.01.05
Coils,
Air Coils
23 82 23
2.8.02.01
23 82 39
Code Description
Iraqi Specification
Iraqi Specification Number
Specific appliances, fireplaces and solid fuel burning equipment Section 920 Heating and Cooling Load Calculations
Package Air Conditioner Unit
IMC
Section 312
Package Air Conditioner Unit
IMC
Chapter 11
The Contractor shall plan, supply, fabricate and install new Unit Ventilators ventilation system.
IMC
Chapter 4
2.8.02.02
The Contractor shall plan, supply, fabricate and install new Unit Heaters heating systems.
IMC
Section 920
23 82 39
2.8.03.07
Electric heaters,
Unit Heaters
IMC
Section 920
23 83 00
2.8.03.01
Heating systems,
Radiant Heating Units
IMC
Section 920
23 83 13
2.8.03.02
Baseboard heaters,
Radiant Heating Electric Cables
IMC
Section 920
23 83 33
2.8.03.03
Resistance heaters in the A/C units may be substituted for Electric Radiant Heaters electric baseboard heaters,
IMC
Section 920
24 11 13
2.3.13
Facility Water Distribution Piping
IPC
Chapter 6
24 13 16
2.3.2.2
Sanitary Waste and Vent Piping
IPC
Section 704
24 13 19.13
2.3.7.2
Sanitary Drains
IPC
Section 412
24 13 19.13
2.3.18
All water piping shall be routed parallel to the building lines. Lateral lines from the building to the sewer mains will slope at a minimum of 2%. Floor drains shall be provided in the mechanical equipment and toilet rooms as required. Floor drain shall be provided in each room that contains a water source. Floor drains shall be provided in the mechanical equipment and toilet room as required.
Sanitary Drains
IPC
Section 412
25 13 19.13
2.3.7.3
Sanitary Drains
IPC
Section 412 Floor and Trench Drains
26 00 00 26 05 13
2.2. 2.2.4.01 02
Drains shall be located near urinals or toilet partitions in toilet rooms Electrical Work: High voltage and low voltage cable
Electrical Medium-Voltage Cables
NEC NEC
N/A N/A Article 300 & Conductors for General AFCEE IICS - Electrical Services 310 Wiring and Wiring Methods Specifications
26 05 13.16
2.2.4.01 06
Conductors
Medium-Voltage, Single- and MultiConductor
NEC
Article 300 & Conductors for General AFCEE IICS - Electrical Services 310 Wiring and Wiring Methods Specifications
Section 3.13
26 05 19
2.2.01
Low-Voltage Electrical Power Conductors and Cables
NEC
Article 300 & Conductors for General AFCEE IICS - Electrical Services 310 Wiring and Wiring Methods Specifications
Section 3
Cables and Wires
26 05 19
2.2.03
Renovate the existing and/or install a new and complete building electrical power and lighting system to include all wiring. Complete the interior and exterior electrical system with commercial/institutional grade wiring and fixtures using International Electric Code. This is to include tracing any existing electrical wires and/or providing new wiring.
Low-Voltage Electrical Power Conductors and Cables
NEC
Article 300 & Conductors for General AFCEE IICS - Electrical Services 310 Wiring and Wiring Methods Specifications
Section 3
Cables and Wires
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Page 33 of 40
Iraq Ministry of Housing & Construction 4.2.14 Technical Specification Book 4: Mechanical Works General Iraq Ministry of Housing & Construction 4.2.14 i Technical Specification Book 4: Mechanical Works General Heating and Cooling Load Iraq Ministry of Housing & Construction 4.2.14 Calculations Technical Specification Book 4: Mechanical Works General Refrigeration Iraq Ministry of Housing & Construction 4.2.13 f Technical Specification Book 4: Mechanical Works General Ventilation Iraq Ministry of Housing & Construction 4.2.61 Technical Specification Book 4: Mechanical Works General Unit Heaters Iraq Ministry of Housing & Construction 4.2.14 i Technical Specification Book 4: Mechanical Works General 4.2.14 i Unit Heaters Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Unit Heaters Iraq Ministry of Housing & Construction 4.2.14 i Technical Specification Book 4: Mechanical Works General Unit Heaters Iraq Ministry of Housing & Construction 4.2.14 i Technical Specification Book 4: Mechanical Works General Unit Heaters Iraq Ministry of Housing & Construction 4.2.14 i Technical Specification Book 4: Mechanical Works General Section 3.2.4.2 Water Supply and AL-FAO GEC - General Technical Distribution Conditions and Specifications Drainage Piping Installation AL-FAO GEC - General Technical Section Conditions and Specifications 3.2.3.12 Floor and Trench Drains AL-FAO GEC - General Technical Section Conditions and Specifications 3.2.11.15 Floor and Trench Drains AL-FAO GEC - General Technical Section Conditions and Specifications 3.2.11.15
Specification Description
AL-FAO GEC - General Technical Conditions and Specifications
Heaters
Evaporator and Condenser coils Fans-Propeller Type (Wall Mounted) Heaters
Heaters
Heaters
Heaters
Heaters
Piping Drainage and Vent Pipes Floor Drains Floor Drains
Section 3.2.11.15
Floor Drains
Section 3
Cables and Wires
High Tension Cable
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
26 05 19
2.2.06 02
Each wire shall be numbered at the terminal points with a Low-Voltage Electrical Power permanent numbering system. Conductors and Cables
NEC
26 05 19
2.2.2.06
Install electrical cable from the distribution panel to the main breakers in each building and tent.
Low-Voltage Electrical Power Conductors and Cables
NEC
Article 300 & Conductors for General AFCEE IICS - Electrical Services 310 Wiring and Wiring Methods Specifications
26 05 33
2.2.01 06
Connectors
Raceway and Boxes for Electrical Systems
NEC
26 05 33
2.2.01 07
Conduit
Raceway and Boxes for Electrical Systems
NEC
N/A Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 342, Intermediate Metal AFCEE IICS - Electrical Services 344, 358, Conduit/Rigid Metal Specifications 353, 365 Conduit; Electrical Metallic Tubing; Rigid Nonmatallic Conduit; High Density Polyethylene Conduit; Electrical Nonmetalic Tubing
26 05 33
2.2.06
The building electrical lines shall be in metal conduit for exposed installation.
Raceway and Boxes for Electrical System
NEC
26 05 36
2.2.06 01
Cable trays
Cable Trays for Electrical Systems
NEC
Article 392 Cable Trays
26 05 43
2.2.05
Underground Ducts and Raceway for Electrical Systems
NEC
Article 300 Underground Installation section 300.50
26 05 43
2.2.4.01
Underground Ducts and Raceway for Electrical Systems
NEC
26 05 43
2.2.4.01 03
The Contractor shall be responsible for trenching and laying underground cable at least 1 meter deep from the buildings to the main distribution panel, with a minimum of 90 cm depth. The contractor's plan shall provide continuous power through an underground or aerial electrical distribution system. Manholes
Underground Ducts and Raceway for Electrical Systems
NEC
26 06 20.16
2.2.01 01
Panels
Electrical Panel board Schedule
NEC
26 06 20.16
2.2.03 07
Main panels
Electrical Panel board Schedule
NEC
26 06 20.16
2.2.03 08
Electrical Panel board Schedule
NEC
26 06 20.26
2.2.01 10
Wiring Device Schedule
NEC
26 06 20.26
2.2.03 05
The contractor shall provide main distribution panel for the generator. Install lights in each room and at least four (4) electrical outlets. Minimum of one (1) outlet per wall that is 2m long or longer, space receptacles at 2m maximum spacing. Electrical outlets
Wiring Device Schedule
NEC
26 10 00
2.2.04
Medium-Voltage Electrical Distribution
NEC
26 10 00
2.2.2
The completed system will be connected into the generated electrical power distribution system. Power Distribution
Medium-Voltage Electrical Distribution
NEC
26 10 00
2.2.2.03
Medium-Voltage Electrical Distribution
NEC
26 10 00
2.2.2.04
Medium-Voltage Electrical Distribution
NEC
26 10 00
2.2.3
The contractor shall plan and install a complete electrical distribution system for the area. The electrical system shall be connected to all buildings requiring electrical service. General
Medium-Voltage Electrical Distribution
NEC
Statement of Requirements Definition
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Construction Specifications Institute # Description
Code
Code #
Code Description
Article 200 Use and Identification of Grounded Conductors
Article 342/344
Iraqi Specification
AFCEE IICS - Electrical Services Specifications
Intermediate Metal AFCEE IICS - Electrical Services Conduit/Rigid Metal Conduit Specifications
Iraqi Specification Number
Specification Description
Section 3.1.10 Identification of Cables & 3.7 & Cable Core Identification Section 3 Cables and Wires
Section 3.1.5 Support and Fixing for Cable
Section 3.1.5 Support and Fixing for Cable
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications
Section 3.12 & Heavy Duty Cable Tray 3.13.1 & Suspend Tray Section 3.1.11 Cables Laid Direct in the Ground
Article 300 Wiring Methods
AFCEE IICS - Electrical Services Specifications
Section 3.1.11 Cables Laid Direct in the Ground
Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 408 Switchboards and Panel boards Article 408 Switchboards and Panel boards Article 408 Switchboards and Panel boards Article 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps)
N/A
Article 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) Article 110 Requirements for Electrical Installation Article 110 Requirements for Electrical Installation Article 110 Requirements for Electrical Installation Article 110 Requirements for Electrical Installation Article 110 Requirements for Electrical Installation
Page 34 of 40
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications N/A
AFCEE IICS - Electrical Services Specifications
Section 2.4
Distribution Board
Section 2.1.1 Main L.V. Switchboard Section 2.1.1 Main L.V. Switchboard
Section 4.11
Socket Outlets
N/A N/A AFCEE IICS - Electrical Services Specifications N/A
Section 0
General Requirements
AFCEE IICS - Electrical Services Specifications
Section 0
General Requirements
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
26 10 00
2.8.2
26 10 13
2.2.3.01 01
26 12 00
2.2.2.05
26 12 00
2.2.4.01 01
26 13 19.13
2.3.7.4
26 18 00
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Code Description
Power Generation:
Medium-Voltage Electrical Distribution
NEC
Primary Unit Substation
NEC
Medium-Voltage Transformer
NEC
Meduim Voltage Transformers
NEC
Sanitary Drains
IPC
2.2.4.01 07
The Electrical Power Generation Plant shall be designed as the primary power generation system. Therefore, provide redundant power generation with the largest generator out of service. It is the intent to utilize the national power grid as a redundant electrical supply in addition to the Electrical Power Generation Plant. Install switching panels, transformer and ring gears for each location to facilitate proper electrical distribution to each of the buildings. The electrical system shall complete with all required transformers. (400V to11KV step-up and local step-down transformer) In mechanical rooms, floor drains will be installed in such away to ensure positive slope to the drains, floor drains shall be provided to avoid running drain piping long distances above or over the floor. Switches
NEC
26 18 00
2.2.4.01 09
Overloads
NEC
26 18 16
2.2.4.01 08
Fuses
Medium-Voltage Circuit Protection Devices Medium-Voltage Circuit Protection Devices Medium-Voltage Fuses
26 27 26
2.2.01 03
Switches
Wiring Devices
NEC
26 27 26
2.2.01.04
Outlets
Wiring Devices
NEC
26 27 26
2.2.01 05
Junction boxes
Wiring Devices
NEC
26 27 26
2.2.03 01
Installation of all switches.
Wiring Devices
NEC
26 27 26
2.2.4.01 04
Junction boxes
Wiring Devices
NEC
26 28 16
2.2.01 02
Breakers
Enclosed Switches and Circuit Breakers
NEC
Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 240 Over current Protection
26 28 16
2.2.03 06
Breakers
Enclosed Switches and Circuit Breakers
NEC
Article 240 Over current Protection
26 36 23
2.2.3.01
26 50 00
2.2.1
The contractor shall provide connection of electrical Automatic Transfer Switch system into the existing Iraqi National local sub-station, if possible. The power connection shall be installed in combination with and through an automatic transfer switch to the Electrical Power Generation Plant Perimeter & Exterior Lights Lighting
26 51 13
2.2.01 08
Fixtures
NEC
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Interior Lighting Fixtures
NEC
Iraqi Specification
Article 110 Requirements for Electrical N/A Installation Article 490 Equipment Over 600Volts, AFCEE IICS - Electrical Services Nominal Specifications
Iraqi Specification Number
Specification Description
Section 10
Standby Diesel Generator Set
Article 450 Transformer and Transformer Vaults (Including secondary ties) Article 450 Transformer and Transformer Vaults (Including secondary ties) Section 412 Floor and Trench Drains
AFCEE IICS - Electrical Services Specifications
Section 1.3
Power Transformer
AFCEE IICS - Electrical Services Specifications
Section 1.3
Power Transformer
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.2.11.15
Article 490 Equipment Over 600Volts, Nominal Article 430 Motors, Motor Circuits and Controllers Article 490 Equipment Over 600Volts, Nominal Article 404 Switches
AFCEE IICS - Electrical Services Specifications N/A
Section 2.3
Fused Switchgear and Isolators
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications
Section 2.3
Fused Switchgear and Isolators Installation, Sockets and Switches Socket Outlets
Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 404 Switches
Section 4 Section 4.11
Floor Drains
N/A
AFCEE IICS - Electrical Services Specifications N/A
Section 4
Section 2.5
NEC
Article 700 Emergency System
AFCEE IICS - Electrical Services Specifications AFCEE IICS - Electrical Services Specifications N/A
NEC
AFCEE IICS - Electrical Services Article 410 Luminaries (lighting fixtures), Lamp holders and Specifications Lamps AFCEE IICS - Electrical Services Article 410 Luminaries (lighting fixtures), Lamp holders and Specifications Lamps
Section 5.1
Lighting Fixtures
Section 5.1
Lighting Fixtures
Page 35 of 40
Section 2.5
Installation, Sockets and Switches
Miniature and Molded Case Circuit Breakers Miniature and Molded Case Circuit Breakers
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
26 51 13
2.2.01 09
26 51 13
2.2.02
26 51 13
2.2.03 02
26 53 00
Statement of Requirements Definition
Construction Specifications Institute # Description
Fluorescent lights shall be mounted on walls (near full wall Interior Lighting Fixtures height) vs. ceiling mounted. Steel conduit shall be exposed instead of embedded placement All outlets in bathrooms, kitchens, and other wet locations Interior Lighting Fixtures shall be waterproof type.
Code
Code Description
Iraqi Specification
AFCEE IICS - Electrical Services Specifications
Lights with cover
Interior Lighting Fixtures
NEC
3.2.03
Install emergency exit signs, in Arabic with international symbols, over primary fire exit routes.
Exit Signs
IBC
Article 410 Luminaries (lighting fixtures), Lamp holders and Lamps Article 314 Outlet, Device, Pull and Junction Boxes: Conduit Bodies: Fittings and Manholes Article 410 luminaries (lighting fixtures), Lamp holders and Lamps Chapter 10 Means of Egress
26 55 53
2.2.1 01
Security Lighting
NEC
Article 410
26 56 00
2.2.1 02
Exterior Lighting
NEC
Article 410
26 56 00
2.2.1 03
The contractor shall provide appropriate security lighting to all building entries, exit ways, building perimeters (1 per corner), and courtyard areas. Exterior lighting system shall provide sufficient lighting in all areas commonly used at night in accordance with ground illumination requirements of the NEC Utilize area lights mounted on building exteriors vs. polemounted lighting wherever feasible.
Exterior Lighting
NEC
Article 410
26 56 00
2.2.5
Exterior Lighting
NEC
Article 410
26 56 00
2.2.5.01
The contractor shall conduct a complete site investigation Exterior Lighting and field check in order to fully research and document the existing electrical street and motor pool lighting system. The contractor shall map out all existing conditions. With this information, the contractor shall provide a complete plan illustrating all existing and proposed new work for the complete renovation of the installation’s street and motor pool lighting system. Construction shall not be started until the plan is approved. The contractor shall complete all work associated with the plan in order to provide a complete and comprehensive street and motor pool lighting system.
NEC
Article 410
27 20 00
2.2.07 01
NEC
Article 800 Communications Circuits
N/A
27 20 00
2.2.07 02
NEC
Article 830 Communications Circuits
N/A
27 20 00
2.2.07 03
Data Communications The contractor shall provide computer systems as an integral part of the infrastructure plan. For facilities traditionally earmarked for computer systems. The contractor shall develop provisions for LAN network Data Communications with consideration provided for Wireless Computer Networks. The contractor shall include the electrical outlets in hidden Data Communications but accessible locations to power the duct-node computer networks like those found in hotels and office buildings.
NEC
Article 800 Communications Circuits
N/A
27 21 33
6.04.
NES
27 30 00
2.2.07
Data Communication s Wireless Access The contractor shall develop provisions for Wireless Computer Networks; consider including electrical outlets Point in hidden but accessible locations to power the duct-node computer networks like those found in hotels and office buildings. Voice Communications The contractor shall provide a communications site infrastructure for telephone as integral part of the infrastructure plan.
Street and Motor Pool Lighting System.
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
NEC
Code #
NEC
NEC
AFCEE IICS - Electrical Services Specifications
N/A
Page 36 of 40
Specification Description
Section 5.1
Lighting Fixtures
Section 5.1
Lighting Fixtures
N/A
Ministry of Higher Education and Scientific Research - Electrical Specifications Luminaries (lighting AFCEE IICS - Electrical Services fixtures), Lamp holders and Specifications Lamps Luminaries (lighting AFCEE IICS - Electrical Services fixtures), Lamp holders and Specifications Lamps AFCEE IICS - Electrical Services Luminaries (lighting fixtures), Lamp holders and Specifications Lamps AFCEE IICS - Electrical Services Luminaries (lighting fixtures), Lamp holders and Specifications Lamps Luminaries (lighting AFCEE IICS - Electrical Services fixtures), Lamp holders and Specifications Lamps
Article 800 Communications Circuits
Iraqi Specification Number
AFCEE IICS - Electrical Services Specifications
N/A
N/A
Section 5.1
Lighting Fixtures
Section 5.1
Lighting Fixtures
Section 5.1
Lighting Fixtures
Section 5.1
Lighting Fixtures
Section 5.1
Lighting Fixtures
N/A
N/A
Section 7.1.2 Telephone System
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
28 31 00
3.2.1
Install commercial grade, hard wired electric and battery powered smoke alarms in all rooms and hallways.
28 31 46
3.2.02
Install commercial grade, hard wired electric and battery powered smoke alarms in all rooms and hallways.
31 05 16
2.4.1.3.3
31 22 00
2.6.4
31 22 00
2.6.6
31 23 23
2.6.5
31 23 23.13
2.4.1.3
31 23 23.13
2.4.1.3.1
32 01 19.61
2.3.22.2
32 11 16
7.1.06
32 23 23.23
2.4.1.3.2
32 23 23.23
2.6.8
32 31 00
2.1.
32 35 13
2.8.1.2.01.02
33 01 30.16
2.4.1.3.6
33 01 30.71
2.4.1.3.7
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Fire Detection and Alarm
IBC
Chapter 9
Smoke Detection Sensors
IBC
Aggregate for earthwork Maximum size of aggregate should be not more than 8 millimeters per 100 millimeters (1 inch per foot) of pipe diameter, or 75 millimeters (3 inches) maximum. Selected aggregate shall consist of well-graded sand, gravel, crushed gravel, crushed stone. Grade all areas to provide a uniform sloping surface. Grading
IBC
Areas around facilities shall be graded to slope away from Grading buildings and facilities in order to provide storm water drainage. Provide fill material as needed to raise grade elevations in Fill built up areas. Fill low areas, unused ditches, and holes.
IBC
Pipe Bedding
Backfill The CONTRACTOR will ensure that the following criteria are met when planning and installing the new, and renovating the existing underground water supply and distribution system: CONTRACTOR shall provide bedding material to level out any irregularities. All the joints shall be grouted and sealed to prevent water Sealing of Joints in Rigid Paving migration into the walls. Compact soils on foundation to 95% maximum density Sub base Course determined by the Standard Proctor Method, ASTM D 698 before concrete is poured.
Fire Protection Systems
[F]907.2.8.3 Smoke Alarms
Section J107.4
Fill Material
Iraqi Specification
41 Ministry of Higher Education and Scientific Research - Electrical Specifications 41.6 Ministry of Higher Education and Scientific Research - Electrical Specifications Iraq Ministry of Housing & Construction - Section 10.5 General and Technical Specifications of the Sanitary Works
Specification Description Fire Detection and Extinguishing System Smoke Detectors
Backfilling of Trenches
Section 3.1.3.3 Clearing and Grading of Site Section 3.2.1.4 Scope of Work
IBC
Section J107 Fill
AL-FAO GEC - General Technical Conditions and Specifications
Section 3.1.3.3 Clearing and Grading of Site
IPC
Section 306 Trenching, Excavation and Backfill
IPC
Section 306 Trenching, Excavation and Backfill
Iraq Ministry of Housing & Construction - Section 10.3 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 10.3 General and Technical Specifications of the Sanitary Works
IPC
Section 705 Joints
AFCEE IICS - Civil Work Specifications
IBC
J107.5
Compaction
AFCEE IICS - Civil Work Specifications
Compaction shall attain 95 percent maximum density for cohesionless soils, and 90 percent maximum density for cohesive soils. This is based on a Standard Proctor, ASTM D698. Soil fill shall be compacted to 90% of the maximum density in unpaved areas and 95% maximum density in paved areas determined by the Standard Proctor Method, ASTM D 698. Minimum extent of grading shall be 300 meters from any facility. Perimeter Wall: At each base the ECP shall meet Coalition Force Protection Standards for vehicle and personnel entrance. Provide new guard towers and security fencing as required. Contractor is to coordinate with the MITT team on site in order to meet the location requirements. Guard towers shall be spaced no more than 300 meters apart Weatherproof louvers with a bird screen,
Compaction
IBC
Section J107.5
Compaction
AL-FAO GEC - General Technical Conditions and Specifications
Compaction
IBC
Section J107.5
Compaction
AL-FAO GEC - General Technical Conditions and Specifications
The Contractor shall inspect all existing underground water piping for defects. The Contractor shall repair all damaged and defective underground water piping as necessary.
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Iraqi Specification Number
Section 1803 Excavation, Grading and Fill AL-FAO GEC - General Technical Conditions and Specifications Section 1803 Excavation, Grading and Fill AL-FAO GEC - General Technical Conditions and Specifications
IBC
Backfill
Code Description
Fences and Gates
CFPS
Screens and Louvers
IMC
TV Inspection of Sewer Pipelines
IPC
Rehabilitation of Sewer Utilities
IPC
Customer Customer Requirement requirement
Outdoor opening protection Iraq Ministry of Housing & Construction Technical Specification Book 4: Mechanical Works General Section 312 Tests and Inspections AL-FAO GEC - General Technical Conditions and Specifications Section Existing Building Sewers AL-FAO GEC - General Technical 703.4 and drains Conditions and Specifications
Page 37 of 40
Section 401.6
AFCEE IICS - Civil Work Specifications
Bedding and Laying of Pipes Bedding and Laying of Pipes
Chapter 11
Finishing of Walls and Ceilings 6-2, 6-3 Chapter 2, Digging Lengthened trenches for general services. Compaction) Section 3.1.8 Backfilling of Trenches
Section 3.1.8 Backfilling of Trenches
3-4
4.2.62 e
General, Fencing the Site
Bird Screen
Section 3.1.5 Existing Service Section 3.1.5 Existing Service
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
33 06 10
2.4.1.3.9
33 06 30
2.5.7
33 06 30
2.5.8
33 06 30
2.5.9
33 12 16
2.4.1.2.7
33 32 13
2.5.2
33 39 13
2.4.1.2.2
33 39 13
2.4.1.2.3
33 39 13
2.4.1.2.4
33 39 13
2.4.1.2.5
33 39 13
2.4.1.2.6
33 47 26
2.6.7
34 06 10
2.4.1.3.10
Water supply mains sizes shall be calculated according to Schedules for Water Utilities maximum daily future flows.
43 12 00
2.7.4.01.01
43 12 16
2.7.4.01.07
44 41 13
2.7.7.1
44 41 13
2.5.1
44 41 13
2.5.4
Compressed air shall be provided using a packaged aircooled electric motor driven compressor Provide an engine driven air compressor where needed for operation during electrical power outages. Waste or hazardous drainage from battery repair/charging areas shall be treated prior to entering the site’s general waste drainage system. The Contractor shall plan and construct a gravity waste water collection and treatment system. The Contractor shall plan for a gravity sanitary sewer system. Where gravity flow is not practical, the system shall consist of a series of holding tanks. The holding tanks will not be placed at or in front of any entrance.
Statement of Requirements Definition
Construction Specifications Institute # Description
Code
Code #
Code Description
Iraqi Specification
The Contractor will plan the overall water supply and distribution system for the base population which will vary with each facility. The Contractor will plan the overall sanitary sewer collection system for the base population with a requirement rate of 300 liters per person per day and the wastewater treatment plant at 200 liters per person per day. The Contractor shall complete all work in order to provide a complete and comprehensive sanitary sewer collection system. The Contractor is responsible for all planning and construction aspects for a complete sanitary sewer collection system. Pipe shall be installed from the holding tanks to the facility exterior to allow removal of product without entering the compound. Service connections to individual building connections requiring water service shall be 1.5 meters outside each building, and shall have an isolation valve in a separate service box with accessible actuator. All sewerage lift stations are to be fenced and accessible only to Contractor tasked with maintenance of the WWCS
Schedules for Water Utilities
IPC
Section 604 Design of Building Water Distribution System
Schedules for Sanitary Sewerage Utilities
IPC
Section 710 Drainage System Sizing
Schedules for Sanitary Sewerage Utilities
IPC
Chapter 7
Sanitary Drainage
Schedules for Sanitary Sewerage Utilities
IPC
Chapter 7
Sanitary Drainage
Water Utility Distribution Valves
IPC
Packaged Sewage Lift Stations
IPC
Section 701.4
Sewage Treatment
N/A
Fabricate and install covers or access hatches at all manholes, and electric hand holes. Cisterns
Sanitary Utility Sewerage Manholes, Frames and Covers Sanitary Utility Sewerage Manholes, Frames and Covers
IPC
Section 708.3.6 Section 606.5.3
Manholes
Sanitary Utility Sewerage Manholes, Frames and Covers Sanitary Utility Sewerage Manholes, Frames and Covers Add fill dirt to within 2 centimeters on the top of concrete Sanitary Utility Sewerage Manholes, manhole cap and grade to slope away from manhole. Add Frames and Covers fill dirt to cover an area of 2 meters around all sides of manhole. Provide storm water management basins or pond areas Storm Water Drainage Reservoir away from developed areas for storm water detention.
IPC
AL-FAO GEC - General Technical Conditions and Specifications Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications AL-FAO GEC - General Technical Conditions and Specifications
Sanitary sewer and water system valve manhole covers shall be round cast iron. Recess and grout all concrete manhole caps.
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Section 606 Installation of Building Water Distribution System
IPC
IBC IBC
Covers
Section Manholes 708.3.6 Section Concrete Masonry 2105.2.2.1.2 Section Fill Material J107.4
Iraqi Specification Number
Specification Description
Iraq Ministry of Housing & Construction - Section 2.1 General Requirements General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Section 3.1.1 General Notes Conditions and Specifications
Iraq Ministry of Housing & Construction - Section 9.1 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 9.1 General and Technical Specifications of the Sanitary Works AL-FAO GEC - General Technical Conditions and Specifications
Building Soil, Waste, Vent and Rain Water Pipe work. Building Soil, Waste, Vent and Rain Water Pipe work.
Section 3.1.28 Valves and Fittings
N/A
N/A
Section 3.1.23 Manholes - Section 11.3
Cold Water Storage Tanks
Section 3.1.23 Manholes Section 3.1.23 Manholes Section 3.1.23 Manholes
Section 1003 Pressure Vessels
Iraq Ministry of Housing & Construction - Section 10.5 General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction - Section 11.1 General and Technical Specifications of the Sanitary Works N/A N/A
N/A
Section 1003 Pressure Vessels
N/A
N/A
IPC
Chapter 11 Storm Drainage
IPC
Section 604 Design of Building Water Distribution System
Gas Compressors
IMC
Piston Gas Compressors
IMC
Packaged Water Treatment Plant
IPC
Packaged Water Treatment Plant
IPC
Packaged Water Treatment Plant
IPC
Chapter 8
Indirect/Special Waste
Section Sewage Treatment 701.4 Section 712 Sumps and Ejectors
Page 38 of 40
N/A
Iraq Ministry of Housing & Construction - Section 10.6 General and Technical Specifications of the Sanitary Works N/A N/A Iraq Ministry of Housing & Construction - Section 9.2 General and Technical Specifications of the Sanitary Works
Backfilling of Trenches
Main Supply Distribution
Manholes, Inspection Chambers and Gullies N/A Drainage Pump Stations
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
44 41 13
2.5.5
44 42 49
2.7.1.5
44 42 49
2.7.4.8
44 42 49
2.7.4.8.1
44 42 00
Construction Specifications Institute # Description
Statement of Requirements Definition
Packaged Water Treatment Plant The Contractor shall plan for a non-mechanical waste water treatment plant where practical, if gravity sewer to the Municipal facilities is not available. Waste oil collection and storage. Water Treatment Oil/Grease Interceptors
IPC
Section 701.4
Grease Interceptor
Water Treatment Oil/Grease Interceptors
IPC
Steel construction, manual cleaning type with removable checker-plate cover, complete with flow control valve.
Water Treatment Oil/Grease Interceptors
IPC
2.7.6.4
Sewage Treatment Facility
Water Treatment Equipment
IPC
44 42 49
2.7.6.2
Waste-oil collection and storage
Water Treatment Oil/Grease Interceptors
IPC
N/A N/A N/A
2.00.04 2.2.03 03 2.2.2.01
Customer Requirement N/A N/A
N/A NEC NEC
N/A
2.2.2.02
N/A
NEC
N/A N/A
2.2.4 2.2.4.01 05
Eliminate ceiling tile except where absolutely necessary Ceiling fans The Contractor shall provide the electrical power distribution system in accordance with the International Building Code Electrical Standards. The Contractor shall provide for the connection of electrical system into the existing Iraqi National local substation, if possible. Criteria Connectors
N/A N/A
N/A NEC
N/A
2.3.7.5
Install p-traps at all applicable locations
N/A
IPC
N/A
2.3.20.1
Provide foot wash stations in all places where there are showers
N/A
NA
N/A
N/A
2.3.21
Provide sanitary sprayer and hose assembly at each toilet. N/A
IPC
Section 424.4
N/A
2.4.1.2.1
N/A
IPC
Chapter 6
N/A
2.7.4.01.02
The main headers leaving the primary water pumping plant shall be at least two (2) pipe sizes oversized and have blind flanges located at tees near both the ends of future expansion zones. ASME rated receiver
N/A
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
N/A
2.7.4.01.03
air cooler
N/A
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
N/A
2.7.4.01.04
moisture separator to remove moisture and oil.
N/A
IMC
Section 1003 Pressure Vessels
N/A
N/A
N/A
N/A
2.7.4.1
Criteria
N/A
IPC
N/A
2.7.4.2.1.2
Install p-traps at all water closet locations.
N/A
IPC
Section 604 Design of Building Water Distribution System Section 1002 Trap Requirements
N/A
2.7.4.3.2
Install p-traps at all sink locations.
N/A
IPC
Section 1002 Trap Requirements
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Sewage Treatment
Iraqi Specification
Specification Description
Code #
IPC
Code Description
Iraqi Specification Number
Code
N/A
N/A
N/A
Section 1003 Interceptors and Separators Iraq Ministry of Housing & Construction - Section 10.6 General and Technical Specifications of the Sanitary Works Section 1003 Interceptors and Separators Iraq Ministry of Housing & Construction - Section 10.6 General and Technical Specifications of the Sanitary Works Section 1003 Interceptors and Separators
Manholes, Inspection Chambers and Gullies
Iraq Ministry of Housing & Construction - Section 10.6 General and Technical Specifications of the Sanitary Works Section 1003 Interceptors and Separators Iraq Ministry of Housing & Construction - Section 10.6 General and Technical Specifications of the Sanitary Works N/A Customer Requirement Article 422 Appliance N/A Article 110 Requirements for Electrical AFCEE IICS - Electrical Services Section 0 Installation Specifications
Manholes, Inspection Chambers and Gullies
Section 701.4
Sewage Treatment
Article 110 Requirements for Electrical AFCEE IICS - Electrical Services Installation Specifications N/A N/A Article 490 Equipment Over 600Volts, Nominal Section 1002 Trap Requirements
Page 39 of 40
N/A
Hose Connected Outlets
Water Supply and Distribution
Section 1.1
Manholes, Inspection Chambers and Gullies
Manholes, Inspection Chambers and Gullies
General Requirements
Installation of Internal Electrical Services
N/A N/A Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
- Section 9.3
Sanitary Fittings
-
N/A
N/A
-
N/A
N/A
- Section 11.1
Main Supply Distribution
AL-FAO GEC - General Technical Section 3.2.11 Plumbing Fixtures Conditions and Specifications Iraq Ministry of Housing & Construction - Section 9.3 Sanitary Fittings General and Technical Specifications of the Sanitary Works
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.
AFCEE Iraq Construction Guide Specifications Requirements Sorted by CSI Construction Specifications Institute (CSI) #
Statement of Requirements (SOR) Section
N/A
2.7.4.4.2
Install p-traps at all sink locations
N/A
IPC
Section 1002 Trap Requirements
N/A
2.7.4.7.2
Install p-traps at all sink locations
N/A
IPC
Section 1002 Trap Requirements
N/A
2.7.4.9.2
Install p-traps at all drain locations
N/A
IPC
Section 1002 Trap Requirements
N/A
2.7.4.12
Hose Bibs
N/A
IPC
Section Hose Connections 608.15.4.2
N/A
2.7.4.12.1
Provide steel taps vs. hose bibs in latrines
N/A
IPC
Section Hose Connections 608.15.4.2
N/A
2.7.4.12.2
Room hose bibs shall be provided as required
N/A
IPC
Section 606.4
N/A
4.01.
N/A
N/A
N/A
N/A
N/A
6.03.
Customer Requirement
N/A
N/A
Customer Requirement
N/A
6.06.
Customer Requirement
N/A
N/A
N/A
7.00.02
The project includes all structures, buildings and systems as required for the installation. Follow "single manufacturer" premise for generators, pumps, valves, compressors, electrical components, etc. where possible for utility plants and critical infrastructure elements (WTPs, WWTPs, Power Plants, etc.) Explore opportunities to make manhole covers inaccessible to vehicle traffic or protect with bollards. All buildings will be planned, designed, renovated, or constructed according to requirements and specifications. Iraqi standards or any other acceptable standards shall be implemented. Eastern and Western-style fixtures will be required and installed where indicated on construction drawings.
Customer Requirement
N/A
N/A
Construction Specifications Institute # Description
Statement of Requirements Definition
IBC, IEC,IPC,IMC,NES, NEC and ASTM are all registered and copyrighted material.
Code
Code #
Page 40 of 40
Code Description
Iraqi Specification Number
Iraqi Specification
Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works Iraq Ministry of Housing & Construction General and Technical Specifications of the Sanitary Works
Specification Description
- Section 9.3
Sanitary Fittings
- Section 9.3
Sanitary Fittings
- Section 9.3
Sanitary Fittings
-
N/A
N/A
-
N/A
N/A
-
N/A
N/A
N/A
N/A
N/A
Customer Requirement
N/A
N/A
N/A
Customer Requirement
AFCEE IICS - Civil Work Specifications
1-7
Standard Specifications
Valve Identification
Versar 2006 and VIAP 2006 . This is a proprietary VIAP document. Any unauthorized use, distribution or copying is prohibited.