ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION PLUMBING FIXTURES AND TRIM Page

ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION 224000 - PLUMBING FIXTURES AND TRIM Page 224000 - 1 PART 1 - GENERAL 1.01 ...
Author: Audrey Cooper
2 downloads 0 Views 79KB Size
ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION 224000 - PLUMBING FIXTURES AND TRIM

Page 224000 - 1

PART 1 - GENERAL 1.01

RELATED DOCUMENTS A.

1.02

WORK INCLUDED A.

1.03

1.04

1.05

Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification sections, apply to work of this section.

Provide labor, materials, equipment and services to perform operations required for the complete installation and related Work as required in Contract Documents.

SUBMITTALS A.

Submit manufacturer's data in accordance with Requirements. Obtain approval prior to ordering material.

Basic

Mechanical/Electrical

B.

Provide submittals for all items specified under Part 2 - "Products" of this section.

DESCRIPTION OF FIXTURES A.

Fixtures and trim shall be of those manufacturers listed, unless otherwise indicated. Fixtures for this project shall be of same manufacturer. 1. Fixtures: American Standard, Crane, Eljer, Gerber or Kohler. 2. Faucets: Chicago Faucets, Cambridge, Moen, Symmons, Delta, T&S Brass, Gerber, or Zurn. 3. Closet Seats: Bemis, Beneke, Church or Olsonite. 4. Fixture Carriers: Jay R. Smith, Watts, Wade, MiFab or Zurn. 5. Sinks: Elkay, Just or Kohler. 6. Water Coolers: Elkay, Halsey Taylor, Haws or equal. 7. Supplies, Stops and Traps: McGuire, Brasscraft, EBC or Sanitary Dash.

B.

Exposed parts of trim shall have polished chrome plated finish.

C.

Tubular drainage products ("P" traps, nipples, etc.) shall be 17 gauge brass.

D.

All fixtures Type A unless otherwise noted.

QUALITY ASSURANCE A.

Comply with requirements of the Plumbing Fixture Law of the New York State Department of Environmental Conservation.

B.

Comply with the American Disabilities Act Guidelines and ANSI A117.1 "Requirements for the Physically Challenged".

C.

Comply with NSF Standard 61, Section 9 Standard for drinking water and lavatory faucets.

ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION 224000 - PLUMBING FIXTURES AND TRIM

Page 224000 - 2

PART 2 - PRODUCTS 2.01

2.02

WATER CLOSETS A.

WC-A: (For the physically challenged - pressure assisted) 1. American Standard #2377.100, Cadet Right Height, floor mounted, vitreous china, pressure assisted, tank type, elongated bowl, close coupled, 17 in. rim height, fully glazed 2 in. ball pass trapway, 1.6 gallon per flush fitted with the following: a. Church #9500SCC extra heavy weight, white solid plastic, open front seat with self-sustaining check hinge, less cover. b. McGuire #166 chrome plated angle supply with 3/8 in. x 12 in. flexible riser, wheel handle stop and wall escutcheon. c. Cast iron closet flange with stainless steel bolts and wax setting ring. d. China bolt caps.

B.

WC-B: (For the physically challenged) 1. American Standard #2998.012 Cadet Right Height, floor mounted, vitreous china, siphon action jetted, tank type, elongated bowl, close coupled, 16-1/2 in. high rim, fully glazed 2 in. ball pass trapway, 1.6 gallon per flush fitted with the following: a. Church #380TL extra heavy weight, white solid plastic, closed front seat with cover. b. McGuire #166 chrome plated angle supply with 3/8 in. x 12 in. flexible riser, wheel handle stop and wall escutcheon. c. Cast iron closet flange with stainless steel bolts and wax setting ring. d. China bolt caps.

LAVATORIES A.

LAV-A: 1. American Standard #0355.012 Lucerne, 20 in. x 18 in., 4 in. centers vitreous china front overflow lavatory with self-draining deck and punching for concealed arm carrier, fitted with the following: a. Chicago No. 895-317-E2805 Hi-Lite Quaturn combination lavatory fitting with No. GN-1A-E2805 rigid gooseneck spout, No. 317 4 in. wrist control handles. b. McGuire #155-A chrome plated PO plug with open grid strainer and 11/4 in., 17 gauge tailpiece. c. McGuire #167LK, 3/8 in., chrome plated wall supplies with loose key angle stops, cast brass setscrew escutcheons and 12 in. long flexible tube risers. d. McGuire #8902, 1-1/4 in. x 1-1/2 in., 17 gauge, chrome plated brass "P" trap with cleanout plug and set screw escutcheon. e. Jay R. Smith Series 700 concealed arm floor mount carrier with rectangular uprights. f. Cover waste, stops and supply piping with ADA conforming pipe covers, Trubro, Inc. "Lav-Guard". g. Mount lavatory at ADA required height. h. Public Toilet Rooms: Provide Chicago No. 3300-CP Meter Mix adjustable self-closing, 4 in. centers single pushbutton metering/ temperature selection faucet with 0.5 gpm or less vandal resistant aerator and 4-3/4 in. spout.

ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION 224000 - PLUMBING FIXTURES AND TRIM B.

2.03

Page 224000 - 3

LAV-B: 1. American Standard #0476.028 Aqualyn, 20 in. x 17 in. oval self-rimming countertop lav with front overflow and faucet ledge, fitted with the following: a. Symmons Faucet Model #S-240 SYMMETRIX two handle 4 in. counterset lavatory faucet with quarter turn ceramic control components and blade handles with red/blue indicators. Aerator, 1/2 in. IPS shanks, metal construction, polished chrome finish. b. McGuire #8902 chrome plated, 17 gauge, 1-1/4 in. x 1-1/2 in. "P" trap with cleanout plug and cast brass escutcheon with setscrew. c. McGuire #155-A chrome plated PO plug with open grid strainer and 11/4 in., 17 gauge tailpiece. d. McGuire #167LK, 3/8 in. chrome plated wall supplies with loose key angle stops. 12 in. long flexible risers, and cast brass escutcheon with setscrews.

SINKS A.

SK-A: (For the physically challenged) 1. Elkay #RSRADQ191955L Pacemaker, 19-1/2 in. x 19 in. x 5-1/2 in. deep, nickel type 304 stainless steel, single bowl, 3 faucet holes, 20 gauge, offset drain for countertop installation, fitted with the following: a. Symmons Faucet Model #S-23 SYMMETRIX single lever faucet with ceramic control components, and red/blue indicators. 3/8 in. supplies, 8 in. centers, metal construction, polished chrome finish. b. Elkay #LK-335 strainer with removable cup, 1-1/2 in. O.D. tailpiece. c. McGuire #8912 cast brass adjustable P-trap with cleanout plug, 1-1/2 in. x 1-1/2 in., tubing outlet and cast brass escutcheon with setscrew. d. McGuire #2167 LK, 1/2 in. supplies with 1/2 in. OD flexible risers, loose key angle stops and cast brass escutcheons with setscrews.

B.

SK-B: 1. Elkay #CR3321, 33 in. x 21 in. x 7 in. deep, nickel type 304 stainless steel, double bowl, 20 gauge for countertop installation, fitted with the following: a. Symmons Faucet Model #S-23-2 SYMMETRIX single lever faucet with ceramic control components, handle limit stop and red/blue indicators. 8-3/4 in. swing spout with aerator, hose and spray, 3/8 in. supplies, 8 in. centers, metal construction, polished chrome finish. b. Elkay #LK-335 strainer with removable cup, 1-1/2 in. O.D. tailpiece. c. Elkay #LK-53 continuous waste, 1-1/2 in. OD. d. McGuire #8912 cast brass adjustable P-trap with cleanout plug, 1-1/2 in. x 1-1/2 in., tubing outlet and cast brass escutcheon with setscrew. e. McGuire #2167 LK, 1/2 in. supplies with 1/2 in. OD flexible risers, loose key angle stops and cast brass escutcheons with setscrews.

C.

SK-C: 1. Elkay Dayton D11719, 17 in. x 19 in., nickel type 304 stainless steel single bowl sink, 3 faucet holes, heavy gauge for countertop installation, fitted with the following: a. Chicago No. 895-317-E2805 Hi-Lite Quaturn combination lavatory fitting with No. GN-1A-E2805 rigid gooseneck spout, No. 317 4 in. wrist control handles. b. McGuire #8912 semi-cast brass adjustable "P" trap, 1-1/2 in. x 1-1/2 in., with cleanout plug and cast brass escutcheon with setscrew. c. McGuire #2167LK 1/2 in. supplies with 1/2 in. O.D. flexible risers, loose key stops and cast brass escutcheons with setscrews.

ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION 224000 - PLUMBING FIXTURES AND TRIM 2.04

MOP BASIN A.

2.05

EWC-A: 1. Elkay #EZS-8, wall mounted, ADA compliant, lead-free construction, type 302 stainless steel cabinet, one piece stainless steel basin, flexible bubbler, selfclosing front and side push bar control with in-line steam regulator, adjustable temperature control, permanently sealed and lubricated fan motor, hermetically sealed compressor and control, 1/5 hp, 120V, capacity of 8.8 gph at 80°F inlet water, 50°F outlet water with room temperature of 90°F, fitted with the following: a. McGuire #167LK, 3/8 in. lavatory wall supply with loose key angle stop, 3/8 in. flexible tube riser, and cast brass escutcheons with setscrews. b. McGuire #8902, 1-1/4 in. x 1-1/2 in. semi-cast brass "P" trap with cleanout and cast brass escutcheon with setscrew. c. Jay R. Smith floor mounted carrier with rectangular uprights. d. Make: Elkay, Halsey Taylor or equal.

BATHTUBS A.

2.07

MB-A: 1. Fiat Model MSB, molded stone, 36 in. x 24 in. x 10 in. deep, stainless steel flat strainer, 2 in. outlet with the following: a. Chicago Faucets #911IS service sink faucet with 892-G elevated vacuum breaker, with 3/4 in. threaded spout No. 369 handles, top wall brace, bracket hook and No. R 1/2 in. flanged female adjustable arms with integral stops and Watts #7 dual check backflow preventers on hot and cold water supplies. All polished chrome plated. Mount vacuum breaker high on wall at ceiling. b. Vinyl bumper guards #E-77-A on exposed sides. c. Silicone sealant between wall and floor sink. d. Color as selected by Owner's Representative.

ELECTRIC WATER COOLER A.

2.06

Page 224000 - 4

BT-A: 1.

ARJO - Parker Bath, reclining bathing system for assisted bathing with all accessories, 120/60/1 power.

SHOWERS (SH) A.

All showers type "A" unless otherwise noted.

B.

SH-A: 1. Fiat Model #A4838-05F (ADA/ANSI) barrier-free design, 48 in. x 36 in. x 84 in. H, back fixture wall, center/center drain location, slip resistant textured bottom, all required grab bars, soap dish, dome light, fold-up set with white bench and curtain rod with shower curtain in color as selected by Owner. 2. Accessories: a. Symmons Temptrol II shower system with hand spray, Model #BP-56300-B30-V-X pressure balance mixing valve with integral service stops. Wall/hand shower with 5 ft - 0 in. flexible metal hose, in-line vacuum breaker, wall connection and flange, 30 in. slide bar for hand shower mounting. b. Curtain and rod; 1 in. diameter stainless steel curtain rod; white 10 oz. curtain with hooks.

ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION 224000 - PLUMBING FIXTURES AND TRIM 2.08

LAUNDRY SINK (L.S.) A.

2.09

Page 224000 - 5

Equal to Fiat Model P-1, free-standing, white poly or Mustee "Utilatub 14". 1. Faucet with swing spout, aerator, chrome plate brass construction, coupling nuts and lever handles. 2. Drain strainer with stopper and 1-1/2 in. tailpiece. 3. 1/2 in. H & C supplies with loose key stops and escutcheons. 4. 1-1/2 in. adjustable "P" trap, nipple and escutcheon. 5. Tapered angle legs that slip into molded sockets for rigid friction fit. Leg levelers with floor anchors.

WASHING MACHINE FITTING A.

Oatey Quadtro Washing Machine outlet box, Model #38535, 2 in. drain and single lever ball valve or Guy Gray unit.

PART 3 - EXECUTION 3.01

FIXTURES, EQUIPMENT AND SYSTEMS A.

3.02

Install fixtures, equipment and systems as shown on Drawings or specified herein in accordance with provisions of each applicable Specification Section and all local and state codes having jurisdiction.

INSTALLATION OF PLUMBING FIXTURES A.

Install plumbing fixtures level and plumb, in accordance with fixture manufacturers written installation instructions.

B.

Carefully drill holes for through bolts to avoid chipping blocks or plaster.

C.

Except where carriers are specified, attach hangers or brackets to walls as follows: 1. Masonry Construction: Secure fixture hangers to partition by thru-bolts extending through a steel plate on opposite side of partition. Obtain Owner's Representative's approval prior to work. 2. Metal Stud Construction: Anchor backing for fixtures or equipment to 1/8 in. x 12 in. steel plate bolted or riveted to at least three studs. Obtain Owner's Representative's approval prior to work.

D.

Seal fixtures in contact with walls, floors, and counters using a sanitary-type, one-part, mildew-resistant, silicone caulk. Match color to fixture color.

E.

Set counter mounted sinks and lavatories in a bed of silicone caulk.

F.

Set floor mounted water closets in a bed of approved setting compound which shall cover the entire perimeter of the closet that comes in contact with the floor.

G.

Install floor-mounted, floor-outlet water closets with closet flanges and gasket seals.

H.

Fasten wall-hanging plumbing fixtures securely to supports attached to building substrate when supports are specified, and to building wall construction where no support is indicated.

ADDITIONS AND RENOVATIONS TO: ELDERWOOD ASSISTED LIVING AT TIOGA SECTION 224000 - PLUMBING FIXTURES AND TRIM

3.03

I.

Fasten counter-mounting-type plumbing fixtures to casework.

J.

Immediately after installation, provide protective covering over fixtures and trim.

MOUNTING HEIGHT A.

3.04

Mount fixtures at height as indicated on Architectural plans and elevations.

CONNECTIONS A.

3.05

Page 224000 - 6

Install piping connections between plumbing fixtures and piping systems and plumbing equipment specified in other sections of Division 22.

ADJUSTING AND CLEANING A.

Operate and adjust faucets and controls. Replace damaged and malfunctioning fixtures, fittings, and controls.

B.

Adjust water pressure at electric water coolers, faucets and flush valves, to provide proper flow and stream.

C.

Replace washers of leaking and dripping faucets and stops.

D.

Clean fixtures, fittings, spout and drain strainers with manufacturers' recommended cleaning methods and materials.

E.

Test fixtures to demonstrate proper operation upon completion of installation and after units are water pressurized. Replace malfunctioning fixtures and components, and retest. Repeat procedure until all units operate properly.

END OF SECTION 224000