INDUSTRIAL FANS AND BLOWERS Canada (Corporate Office & Plant) TLT CO-VENT Fans Inc. 1381 Hocquart Street St-Bruno (Montreal) QC J3V 6B5 Canada Tel: (450) 441-3233 Fax: (450) 441-2189 Email:
[email protected]
2.
Sales (Division Office) TLT CO-VENT Fans Inc. 22 King St. South, Suite 402 Waterloo ON N2J 1N8 Canada Tel: (519) 884-7788 (888) 244-7644 Fax: (519) 884-7588 Email:
[email protected]
BRAZIL FABRIMAQ (licensee) Av. Brasilia 4514 Sao Benedito CEP 33110/580 Santa Luzia - MG Brazil Tel: 011 55-31-637-2388 Fax: 011 55-31-637-2367
1.
STANDARD PRODUCTS TLT CO-VENT offers a complete range of standard centrifugal fans and blowers:
2.
1. Centrifugal Fans - Class I, II, III Single and double width 3 up to 132 m /s (155,000 CFM) and 3.5 kPa (14 inWG) 2. Industrial Centrifugal Fans 3 Up to 73 m /s (155,000 CFM) and 13,7 kPa (55 in WG)
3.
3. Pressure Blowers Up to 35 m3/s (74,000 CFM) and 31 kPa (125 in WG)
Printed in Canada
KITCHENER PRINTING / DESIGN PRINTED IN CANADA
A Leader in Heavy-Duty Centrifugal Fans, Blowers and Exhausters
Induced draft fan for a cement plant
Quality Assurance Our stringent quality assurance program is
TLT CO-VENT's quality assurance manuals
registered with the Bureau de Normalization of Quebec (BNQ) to the ISO 9001-94 standard. This international standard is accepted by clients worldwide. We also meet the welding requirements of CWB W47.1 Div. 3 (Canadian Welding Bureau)
TLT CO-VENT supplied 54 fans for a Pechiney aluminum smelter with a total flow of 1 650 m3/s (3,500,000 CFM) and 12 100 kW (16,200 BHP)
and AWS (American Welding Society).
Designs
requiring special standards such as API are available. TLT CO-VENT recognizes the importance of total quality as a tool to increased productivity and a finished product of superior quality. Performance tests are always conducted according to AMCA or ASME standards. Non-destructive tests (dye penetrant, magnetic
Dye penetrant test of rotor welds
particle, ultra sound, X-ray) are conducted in our plant, depending on the design requirements. Shop mechanical run tests are available using our shop variable speed drive. Rotor of 25 tons for the iron ore pellet plant industry on 50 ton capacity dynamic balancing machine
Facilities Our production equipment is at the leading edge of modern technology. The use of CAD/CAM enables the rational and productive use of material and labor. Computer assisted underwater plasma arc cutting technology permits cutting special materials (aluminum, stainless steel, Hastelloy, etc…) silently and with exceptional quality.
Double stage blower with cast iron housing used in an air process; model CD5-4025; 3 7.47 m /s (15,820 CFM); 56.4 kPa (8.2 PSIG or 227.2 in WG); 455 kW (610 BHP)
Large and small
capacity balancing machines with capacity of up to 50 tons, provide both static and dynamic balancing of the rotor with great precision.
CAD/CAM facilities
Fan rotor with chromium carbide wear liners for an iron ore pelletizing plant
2
11
Double stage aeration blower, for a waste water treatment 3 plant; 1.1 m /s (2,350 CFM); 55 kPa (8 PSIG or 222 in WG); 3,560 RPM
Single and Double Stage Blowers
TLT CO-VENT
TLT CO-VENT offers a full line of single stage and
TLT CO-VENT specializes in the custom design manufacture
3
and testing of heavy-duty industrial fans and blowers. We offer
3
(250 CFM) and 990 Pa (4 in WG), up to 23.6 m /s
a complete range of sizes and impeller designs, which allow us
(50,000 CFM) and 103 kPa (15 PSIG or 415 in WG).
to meet all industrial air moving requirements. As part of the
The double stage blower design was developed
TLT Fan Group, we are now able to offer axial flow fans for
using our high efficiency impeller used in single
power generation, mining and transit tunnel ventilation
stage blowers. Double stage blowers are available
requirements.
with fabricated or cast iron casings.
Superior
experience, high degree of flexibility, excellent product range,
performance, high efficiency and reliability are the
and a strong commitment to quality assurance supported by a
principal assets of our blowers. TLT CO-VENT's
program of research and development.
blowers are highly resistant to severe conditions
its products world wide through a network of sales
such as high temperature, corrosion and abrasion.
representatives and company sales offices supported by highly
double stage blowers with capacities from 0.12 m /s
Double stage blower supplied to Zurn Nepco USA; model CD5-4025; 3 7.5 m /s (15,908 CFM); 53 kPa (7.7 PSIG or 213 in WG); 3,550 RPM; 444 kW (596 BHP)
Our company success is based upon our
TLT CO-VENT markets
experienced company sales engineers. Licensees are located in Europe, Asia and South America.
TLT CO-VENT products are
used in a wide range of applications including: boilers, thermal Single stage blower supplied to Roche Carolina, engineering: UEC; blower housing and wheel in Monel; gas tight construction with casing designed to 10 bar (150 PSI)
power stations, incinerators, palletizing plants, aluminum
Service and Repair
smelters, steel plants, cement plants, petrochemical plants,
Customer service is an important part of our day to
mine and tunnel ventilation projects, etc…
day operations. Our highly trained engineers and
fans and blowers, manufactured by TLT CO-VENT can be found
technicians are at your service for equipment repair,
in Canada, U.S.A., Mexico, South America, Asia and South
replacement and upgrading.
Africa.
TLT CO-VENT offers
Today, operating
repair and rebuild service as a low capital cost alternative to new equipment.
By keeping most
components and replacing only those, which are
Repair of a 3.33 m (131”) diameter wheel
worn, corroded or damaged, TLT CO-VENT offers a cost effective alternative to new equipment. Whether you require increased capacity, improved efficiency or longer life expectancy, our equipment upgrade service may be the most effective answer. By replacing the impeller with one of TLT CO-VENT's
TLT CO-VENT's research and development center and plant
high efficiency designs and keeping the existing casing, the fan's performance is upgraded.
Inspection of fan handling corrosive gases
10
3
Municipal sewage sludge incinerator scrubber fan, model E20S-5900, with housing in stainless steel and wheel in Hastelloy C-276
TLT CO-VENT's Range of Industrial Fans and Blowers
Chemical and Pulp and Paper Industries
TLT CO-VENT offers a full range of custom-made and
High temperature and pressure, corrosion, build-up,
standard industrial fans and blowers to meet the
contamination and explosive gases are some of the
requirements of most applications. Over the years,
challenges faced by fans for chemical industry
we have constantly improved our four basic
applications. Thanks to experience and
centrifugal fan designs. Each design has its own
development, TLT CO-VENT now offers a range of
features such as maximum efficiency, economy,
fans and single and double stage blowers, which
abrasion resistance, etc…
cover the chemical industry's needs. Some of the features we offer include:
Our wide range of fans and blowers, available in
Specialty materials such as Hastelloy, Inconel,
single width, double width and double stage can
Monel, stainless steels, aluminum alloys, etc…
move air and various gases with capacities up to 945
Special coatings
m /s (2,000,000 CFM) and up to 103 kPa (15 PSIG or
Zero leakage shaft seals and casings
415 in WG)
Fiberglass reinforced plastic (FRP) CASINGS
3
Below are just a few examples of the
impeller types and standard fan arrangements
I.D. fan, model E50S-7155, with wheel and housing in stainless steel operating after a spray dryer in the United States.
Spark proof fans
which are available.
Smelter and Aluminum Plants TLT CO-VENT industrial fans operate in many A Fan type Double airfoil blade Peak efficiency: 90% Highest efficiency design
ARR. NO. 1 SWSI
4
ARR. NO. 8 SWSI
C Fan type Backward curved or single thickness airfoil blade Peak efficiency: 86%
ARR. NO. 7 SWSI or DWDI
E Fan type Modified radial tip Slightly Backwards flat blade Peak efficiency: 82% High dust loading capabilities
R Fan type Radial blade Shrouded or unshrounded wheel Peak efficiency: 76% High dust loading capabilities
ARR. NO. 3 DWDI or SWSI
smelter plants world wide. For example: exhaust fans operating on the world's highest amperage pot line gas cleaning system, fluidization blowers, etc…
TLT CO-VENT supplied 22 exhaust fans, model A80S-5450, to Alumax USA aluminum smelter 3 for a total of 924 m /s (1,958,000 CFM) and 6 050 kW (8,100 BHP) at 5.6 kPa (22.8 in WG)
9
I.D. fan for a petrochemical furnace operating in Texas City, TX: model A60D-5675 DWDI with Arr. 7 common fan and motor base with sleeve bearings arranged for circulating oil.
Thermal Process and Power Plant Industries TLT CO-VENT manufactures a complete range of heavy-duty centrifugal fans and blowers for power generation and industrial boiler applications as well as for petro-chemical process heater and furnace applications. We offer a full line of forced draft (F.D.) , induced draft (I.D.) and other high temperature mechanical draft fans. TLT CO-VENT is very experienced with all of the requirements of API and
Two F.D. fans supplied to Foster Wheeler for the Dominican Republic; model A55S-6200; 3 50 m /s (105,900 CFM); 11.2 kPa (45 in WG); wheel diameter: 1.57 m (62”)
other industry standards regarding special purpose fans and accessories.
Regardless of the type of
fan we recognize that reliability is of prime importance. TLT CO-VENT understands that down time is expensive for our clients and we do the utmost to design and build our fans with reliability and low maintenance in mind.
Research and Development At TLT CO-VENT, our designs are based on extensive and on-going research and development. This includes: Development of products designed to meet the specific requirements of an application, such as
AMCA 210 fan laboratory testing chamber
resistance to abrasion, corrosion, zero leakage shaft seals, etc… Development and improvement of custom and standard fan and blower designs. Available Testing and analysis: - API 560 and API 673 performance and mechanical run tests - laboratory prototype tests - full scale size fan tests - FEA (Finite Element Analysis) of rotor stress
Full scale shop performance test
and dynamic properties - critical speed and torsional analysis - vibration analysis of rotors and structures
I.D. fan with airfoil blades with partial wear liners; 3 model A75D-1157; 425 m /s (900,000 CFM); 3.98 kPa (16 in WG); 2 127 kW (2,852 BHP); wheel diameter: 2.94 m (115.75”)
- fan accessory studies of: * couplings * structural bases * foundations, etc…
Resonant frequency analysis “Bump” test being performed on a variable speed rotor
Two I.D. fans for a Babcock & Wilcox boiler
Variable inlet vanes for a F.D. fan; diameter: 2 m (79”)
F.D. fan supplied to Union Carbide Ltd. for a Babcock & Wilcox boiler equipped with gearbox and steam turbine
8
In-house Finite element analysis (FEA) of wheel
5
I.D. fan for pelletizing plant; model E60D-9950; 3 225 m /s (477,000 CFM); 5.53 kPa (22.27 in WG); 2 400 kW (3,200 HP) motor; rotor weight: 19 090 kg (42,000 lbs); wheel dia: 2.53 m (99.5”)
Cement Plant and Steel Industries
Abrasion Resistance Various techniques of abrasion control are offered
In these industries, the most important design factor
for severely abrasive environments.
Backward
is the protection against abrasion and wear.
inclined blades produce abrasion patterns, which
Through extensive research and development, TLT
are concentrated near the center plate (back plate).
CO-VENT has developed solutions to answer our
Thus, the use of partial wear liners on the blade
clients' most demanding operating conditions.
protects this zone and the blade center plate weld.
These solutions include special blade designs, a full
A severely abrasive environment requires the
line of partial and full wear liners and anti-abrasion
protection of surfaces with resistant materials such
dust deflectors.
as ceramic, chromium carbide or tungsten carbide. Sophisticated custom anti-abrasive dust deflectors can be added to guide the abrasive particles between the blades, significantly increasing the life of the rotor.
DWDI wheel equipped with chromium carbide hard surfacing for the steel industry
Two raw mill fans supplied to UBE Industries for an Indonesian cement plant; model C30D-1310; 3 192 m /s (406,120 CFM); 15.18 pa (61 in WG); 3325 kW (4,459 BHP); wheel diameter: 3.33 m (131”)
Wheel equipped with chromium carbide wear liners and anti-abrasion dust deflectors Preheater Kiln I.D. fan with special centerline support housing and Arr. 7A (frame) common fan and motor base.
Preheater kiln I.D. fan supplied to Cimento Portland Rio Branco, Brazil; engineering: Technip; model A40D-1107; 3 175 m /s (371,230 CFM); 12.74 kPa (51.2 in WG); 1797 kW (2410 BHP); wheel diameter: 2.81 m (110.75”)
Housing with ceramic protection used in the steel industry
Anti-abrasion dust deflector principle
6
7
I.D. fan for pelletizing plant; model E60D-9950; 3 225 m /s (477,000 CFM); 5.53 kPa (22.27 in WG); 2 400 kW (3,200 HP) motor; rotor weight: 19 090 kg (42,000 lbs); wheel dia: 2.53 m (99.5”)
Cement Plant and Steel Industries
Abrasion Resistance Various techniques of abrasion control are offered
In these industries, the most important design factor
for severely abrasive environments.
Backward
is the protection against abrasion and wear.
inclined blades produce abrasion patterns, which
Through extensive research and development, TLT
are concentrated near the center plate (back plate).
CO-VENT has developed solutions to answer our
Thus, the use of partial wear liners on the blade
clients' most demanding operating conditions.
protects this zone and the blade center plate weld.
These solutions include special blade designs, a full
A severely abrasive environment requires the
line of partial and full wear liners and anti-abrasion
protection of surfaces with resistant materials such
dust deflectors.
as ceramic, chromium carbide or tungsten carbide. Sophisticated custom anti-abrasive dust deflectors can be added to guide the abrasive particles between the blades, significantly increasing the life of the rotor.
DWDI wheel equipped with chromium carbide hard surfacing for the steel industry
Two raw mill fans supplied to UBE Industries for an Indonesian cement plant; model C30D-1310; 3 192 m /s (406,120 CFM); 15.18 pa (61 in WG); 3325 kW (4,459 BHP); wheel diameter: 3.33 m (131”)
Wheel equipped with chromium carbide wear liners and anti-abrasion dust deflectors Preheater Kiln I.D. fan with special centerline support housing and Arr. 7A (frame) common fan and motor base.
Preheater kiln I.D. fan supplied to Cimento Portland Rio Branco, Brazil; engineering: Technip; model A40D-1107; 3 175 m /s (371,230 CFM); 12.74 kPa (51.2 in WG); 1797 kW (2410 BHP); wheel diameter: 2.81 m (110.75”)
Housing with ceramic protection used in the steel industry
Anti-abrasion dust deflector principle
6
7
I.D. fan for a petrochemical furnace operating in Texas City, TX: model A60D-5675 DWDI with Arr. 7 common fan and motor base with sleeve bearings arranged for circulating oil.
Thermal Process and Power Plant Industries TLT CO-VENT manufactures a complete range of heavy-duty centrifugal fans and blowers for power generation and industrial boiler applications as well as for petro-chemical process heater and furnace applications. We offer a full line of forced draft (F.D.) , induced draft (I.D.) and other high temperature mechanical draft fans. TLT CO-VENT is very experienced with all of the requirements of API and
Two F.D. fans supplied to Foster Wheeler for the Dominican Republic; model A55S-6200; 3 50 m /s (105,900 CFM); 11.2 kPa (45 in WG); wheel diameter: 1.57 m (62”)
other industry standards regarding special purpose fans and accessories.
Regardless of the type of
fan we recognize that reliability is of prime importance. TLT CO-VENT understands that down time is expensive for our clients and we do the utmost to design and build our fans with reliability and low maintenance in mind.
Research and Development At TLT CO-VENT, our designs are based on extensive and on-going research and development. This includes: Development of products designed to meet the specific requirements of an application, such as
AMCA 210 fan laboratory testing chamber
resistance to abrasion, corrosion, zero leakage shaft seals, etc… Development and improvement of custom and standard fan and blower designs. Available Testing and analysis: - API 560 and API 673 performance and mechanical run tests - laboratory prototype tests - full scale size fan tests - FEA (Finite Element Analysis) of rotor stress
Full scale shop performance test
and dynamic properties - critical speed and torsional analysis - vibration analysis of rotors and structures
I.D. fan with airfoil blades with partial wear liners; 3 model A75D-1157; 425 m /s (900,000 CFM); 3.98 kPa (16 in WG); 2 127 kW (2,852 BHP); wheel diameter: 2.94 m (115.75”)
- fan accessory studies of: * couplings * structural bases * foundations, etc…
Resonant frequency analysis “Bump” test being performed on a variable speed rotor
Two I.D. fans for a Babcock & Wilcox boiler
Variable inlet vanes for a F.D. fan; diameter: 2 m (79”)
F.D. fan supplied to Union Carbide Ltd. for a Babcock & Wilcox boiler equipped with gearbox and steam turbine
8
In-house Finite element analysis (FEA) of wheel
5
Municipal sewage sludge incinerator scrubber fan, model E20S-5900, with housing in stainless steel and wheel in Hastelloy C-276
TLT CO-VENT's Range of Industrial Fans and Blowers
Chemical and Pulp and Paper Industries
TLT CO-VENT offers a full range of custom-made and
High temperature and pressure, corrosion, build-up,
standard industrial fans and blowers to meet the
contamination and explosive gases are some of the
requirements of most applications. Over the years,
challenges faced by fans for chemical industry
we have constantly improved our four basic
applications. Thanks to experience and
centrifugal fan designs. Each design has its own
development, TLT CO-VENT now offers a range of
features such as maximum efficiency, economy,
fans and single and double stage blowers, which
abrasion resistance, etc…
cover the chemical industry's needs. Some of the features we offer include:
Our wide range of fans and blowers, available in
Specialty materials such as Hastelloy, Inconel,
single width, double width and double stage can
Monel, stainless steels, aluminum alloys, etc…
move air and various gases with capacities up to 945
Special coatings
m /s (2,000,000 CFM) and up to 103 kPa (15 PSIG or
Zero leakage shaft seals and casings
415 in WG)
Fiberglass reinforced plastic (FRP) CASINGS
3
Below are just a few examples of the
impeller types and standard fan arrangements
I.D. fan, model E50S-7155, with wheel and housing in stainless steel operating after a spray dryer in the United States.
Spark proof fans
which are available.
Smelter and Aluminum Plants TLT CO-VENT industrial fans operate in many A Fan type Double airfoil blade Peak efficiency: 90% Highest efficiency design
ARR. NO. 1 SWSI
4
ARR. NO. 8 SWSI
C Fan type Backward curved or single thickness airfoil blade Peak efficiency: 86%
ARR. NO. 7 SWSI or DWDI
E Fan type Modified radial tip Slightly Backwards flat blade Peak efficiency: 82% High dust loading capabilities
R Fan type Radial blade Shrouded or unshrounded wheel Peak efficiency: 76% High dust loading capabilities
ARR. NO. 3 DWDI or SWSI
smelter plants world wide. For example: exhaust fans operating on the world's highest amperage pot line gas cleaning system, fluidization blowers, etc…
TLT CO-VENT supplied 22 exhaust fans, model A80S-5450, to Alumax USA aluminum smelter 3 for a total of 924 m /s (1,958,000 CFM) and 6 050 kW (8,100 BHP) at 5.6 kPa (22.8 in WG)
9
Double stage aeration blower, for a waste water treatment 3 plant; 1.1 m /s (2,350 CFM); 55 kPa (8 PSIG or 222 in WG); 3,560 RPM
Single and Double Stage Blowers
TLT CO-VENT
TLT CO-VENT offers a full line of single stage and
TLT CO-VENT specializes in the custom design manufacture
3
and testing of heavy-duty industrial fans and blowers. We offer
3
(250 CFM) and 990 Pa (4 in WG), up to 23.6 m /s
a complete range of sizes and impeller designs, which allow us
(50,000 CFM) and 103 kPa (15 PSIG or 415 in WG).
to meet all industrial air moving requirements. As part of the
The double stage blower design was developed
TLT Fan Group, we are now able to offer axial flow fans for
using our high efficiency impeller used in single
power generation, mining and transit tunnel ventilation
stage blowers. Double stage blowers are available
requirements.
with fabricated or cast iron casings.
Superior
experience, high degree of flexibility, excellent product range,
performance, high efficiency and reliability are the
and a strong commitment to quality assurance supported by a
principal assets of our blowers. TLT CO-VENT's
program of research and development.
blowers are highly resistant to severe conditions
its products world wide through a network of sales
such as high temperature, corrosion and abrasion.
representatives and company sales offices supported by highly
double stage blowers with capacities from 0.12 m /s
Double stage blower supplied to Zurn Nepco USA; model CD5-4025; 3 7.5 m /s (15,908 CFM); 53 kPa (7.7 PSIG or 213 in WG); 3,550 RPM; 444 kW (596 BHP)
Our company success is based upon our
TLT CO-VENT markets
experienced company sales engineers. Licensees are located in Europe, Asia and South America.
TLT CO-VENT products are
used in a wide range of applications including: boilers, thermal Single stage blower supplied to Roche Carolina, engineering: UEC; blower housing and wheel in Monel; gas tight construction with casing designed to 10 bar (150 PSI)
power stations, incinerators, palletizing plants, aluminum
Service and Repair
smelters, steel plants, cement plants, petrochemical plants,
Customer service is an important part of our day to
mine and tunnel ventilation projects, etc…
day operations. Our highly trained engineers and
fans and blowers, manufactured by TLT CO-VENT can be found
technicians are at your service for equipment repair,
in Canada, U.S.A., Mexico, South America, Asia and South
replacement and upgrading.
Africa.
TLT CO-VENT offers
Today, operating
repair and rebuild service as a low capital cost alternative to new equipment.
By keeping most
components and replacing only those, which are
Repair of a 3.33 m (131”) diameter wheel
worn, corroded or damaged, TLT CO-VENT offers a cost effective alternative to new equipment. Whether you require increased capacity, improved efficiency or longer life expectancy, our equipment upgrade service may be the most effective answer. By replacing the impeller with one of TLT CO-VENT's
TLT CO-VENT's research and development center and plant
high efficiency designs and keeping the existing casing, the fan's performance is upgraded.
Inspection of fan handling corrosive gases
10
3
Induced draft fan for a cement plant
Quality Assurance Our stringent quality assurance program is
TLT CO-VENT's quality assurance manuals
registered with the Bureau de Normalization of Quebec (BNQ) to the ISO 9001-94 standard. This international standard is accepted by clients worldwide. We also meet the welding requirements of CWB W47.1 Div. 3 (Canadian Welding Bureau)
TLT CO-VENT supplied 54 fans for a Pechiney aluminum smelter with a total flow of 1 650 m3/s (3,500,000 CFM) and 12 100 kW (16,200 BHP)
and AWS (American Welding Society).
Designs
requiring special standards such as API are available. TLT CO-VENT recognizes the importance of total quality as a tool to increased productivity and a finished product of superior quality. Performance tests are always conducted according to AMCA or ASME standards. Non-destructive tests (dye penetrant, magnetic
Dye penetrant test of rotor welds
particle, ultra sound, X-ray) are conducted in our plant, depending on the design requirements. Shop mechanical run tests are available using our shop variable speed drive. Rotor of 25 tons for the iron ore pellet plant industry on 50 ton capacity dynamic balancing machine
Facilities Our production equipment is at the leading edge of modern technology. The use of CAD/CAM enables the rational and productive use of material and labor. Computer assisted underwater plasma arc cutting technology permits cutting special materials (aluminum, stainless steel, Hastelloy, etc…) silently and with exceptional quality.
Double stage blower with cast iron housing used in an air process; model CD5-4025; 3 7.47 m /s (15,820 CFM); 56.4 kPa (8.2 PSIG or 227.2 in WG); 455 kW (610 BHP)
Large and small
capacity balancing machines with capacity of up to 50 tons, provide both static and dynamic balancing of the rotor with great precision.
CAD/CAM facilities
Fan rotor with chromium carbide wear liners for an iron ore pelletizing plant
2
11
INDUSTRIAL FANS AND BLOWERS Canada (Corporate Office & Plant) TLT CO-VENT Fans Inc. 1381 Hocquart Street St-Bruno (Montreal) QC J3V 6B5 Canada Tel: (450) 441-3233 Fax: (450) 441-2189 Email:
[email protected]
2.
Sales (Division Office) TLT CO-VENT Fans Inc. 22 King St. South, Suite 402 Waterloo ON N2J 1N8 Canada Tel: (519) 884-7788 (888) 244-7644 Fax: (519) 884-7588 Email:
[email protected]
BRAZIL FABRIMAQ (licensee) Av. Brasilia 4514 Sao Benedito CEP 33110/580 Santa Luzia - MG Brazil Tel: 011 55-31-637-2388 Fax: 011 55-31-637-2367
1.
STANDARD PRODUCTS TLT CO-VENT offers a complete range of standard centrifugal fans and blowers:
2.
1. Centrifugal Fans - Class I, II, III Single and double width 3 up to 132 m /s (155,000 CFM) and 3.5 kPa (14 inWG) 2. Industrial Centrifugal Fans 3 Up to 73 m /s (155,000 CFM) and 13,7 kPa (55 in WG)
3.
3. Pressure Blowers Up to 35 m3/s (74,000 CFM) and 31 kPa (125 in WG)
Printed in Canada
KITCHENER PRINTING / DESIGN PRINTED IN CANADA
A Leader in Heavy-Duty Centrifugal Fans, Blowers and Exhausters
