A Division of Sorrentino Mariani
Furniture With A Heart SMCO, a division of Sorrentino Mariani, is proud to introduce our new collection of furnishings specifically designed for use in Senior Living communities. Proudly made in the USA.
e vi de N c e -B A s e d & c U s To m i Z A B Le
Our Senior Living Collections are created using
For over thirty years, we have assisted our
evidence-based design which benefits residents as
customers in meeting stringent standards based on
well as staff.
the individual property and customer requirements.
• The backs of our case goods are vented
From three-star to five-star properties, from hospitality
• Our corners are rounded
• Our durable finishes make them easy to clean
• Furniture heights and clearances meet accessible transit lodging standards The primary feature that makes our senior living
furniture ideal for any setting is our ability to customize. If your needs are not met by what we offer, we can modify existing groups or design highly customized pieces that will fit your requirements and your budget.
discover smco
As a company, we take great pride in our quality craftsmanship, commitment to the environment, and diverse American workforce.
to government to senior living, from buying a few nightstands to filling one thousand rooms, we are dedicated to your needs. With state-of-the-art equipment, our craftsmen achieve the highest level of quality in our joinery, carvings, and wood details found in all of our furniture. Our long-lasting finishes are easy to maintain and retain the same luster and quality as the day they leave our factory.
A m e ri c A N m A d e Fo r Yo U r Be N e F i T Our quality wood and wood products
helps us maintain clear communication with our
come from trees grown in North
clients and our suppliers. Another benefit is that our
American sustainable forests. Waste
customers receive the best price possible. Since
and by-products are recycled. Our
there is no need to ship across an ocean, customers
suppliers are certified by the Appalachian Hardwood
experience a reduced freight cost and on-time
Association, which requires that for every tree
delivery. All of these things help our prices remain
harvested, three are planted.
competitive and continue to keep customer service
high on our list of priorities.
• Finishing products used at SMCO promote better air quality and are
low VOC and low HAPS.
• Our glues are formaldehyde free.
• Most of our suppliers ship from within 500 miles of our factory. We highly recommend blanket wrapped deliveries to eliminate the waste and disposal of cartons that would end up in landfills.
SMCO is an All-American furniture factory from
our wood to our workers. This helps the customer and the American economy. Manufacturing in America
When it comes to our Senior Living Collection,
none of this can be truer. From purchase order to delivery we will be with you every step of the way to make obtaining quality crafted furniture that fits your senior living environment, as well as your budget, a smooth and painless process. Every step of the way, SMCO is committed to you. Rest assured that every piece you receive from SMCO is manufactured to the highest of standards by an American workforce in the port-side city of Norfolk, Virginia. Their spirit is the reason our furniture will always have heart.
To learn more about Sorrentino Mariani and SMCO, we invite you to go to our website, www.smfurniture.com.
3
FeATUres & BeNeFiTs
Features & Benefits 1 2
1
High Pressure Laminate Top. Highly durable, prevents scratches and resists water.
2
1/2” Thick, 9 Ply Baltic Birch Plywood Drawer Box with English dovetails on all four corners. Separate and detachable drawer face for easy repair and adjustment. Clear coat finished wood or high density white hardboard drawer bottoms available.
3
100 lb. Rated Ball-Bearing Side Glides, well-fitted, long lasting with minimal side-to-side movement. All drawer bottoms fully captured and glued.
4
Maple, Oak, Cherry, Mahogany or Walnut Veneers, select solids based on best use practices. All wood products are from North American Sustainable Forests.
5
Solid Wood Legs, Stiles, Face-Frames, and Base Moldings. Resists damages from impact during use and cleaning.
6
Nine Step Finish with Pre-catalyzed top coats. Highly durable finish which resists fading and yellowing. Highly durable, resists water, most chemicals, and cleaning solutions. This finish has low VHAPS (volatile hazardous air pollutants) and a high solid content that is earth friendly.
7
Vented Wood or Printed Backs Where Specified (Varies per group)
8
Recessed Back Panel. Allows case to be placed flush against walls without interfering with electrical cords.
9
All Legs, Base Moldings and Face Frames have carpet glides and/or leg levelers. (Varies per application)
3
4
5 6
7
8
10 9
10 If Design Dictates The Use Of A Plinth Base With side panels to the floor all bottom edges are sealed with PVC edgebanding.
4
Modern s
treamlined silhouettes, the bold blend
of woods and metals, and a strong
geometric presentation define the SMCO Modern Collection. As with all SMCO lines, our Modern Collection can be customized to meet the exact specifications of your senior living environment.
F
Freemason
reemason is a bold and exciting alternative to standard senior living furnishings. The angled legs and oversized crowns add drama to Freemason’s low profiled lines while the Asian inspired
design and dark witchcraft finish give Freemason its sophisticated styling. Freemason is the perfect furniture line for those looking to create a
contemporary environment.
w w w. S M F u r n i t u r e . c o m | 7 5 7 - 6 2 4 - 9 0 2 5
FreemAsoN
The contemporary lines of Freemason add a sophisticated look to any environment.
FLAT BAR PULL JG Edelen JGE#2376 Matte Chrome
Interior of Freemason Wardrobe.
7
FreeMASON
FUrNiTUre
WARDROBE
porTFoLio
WAL L U Ni T s
WALL UNIT A-WU-103 149W X 24D X 78H
DESK A-WU-103-B 77W X 24D X 30H
WARDROBE A-WU-103-A 36W X 24D X 78H
BRIDGE A-WU-103-C 77W X 24D X 48H
WALL UNIT A-WU-1024 125W X 24D X 78H
DESK A-WU-1024-B 77W X 22D X 30H
WARDROBE A-WU-1024-A 24W X 24D X 78H
BRIDGE A-WU-1024-C 77W X 22D X 48H
DeSk
CABINET A-WU-1024-D 24W X 24D X 78H
3-DrAWer CHeST
1-DrAWer NIGHTSTAND
Bed s
HEADBOARD FM-091-MO 38W X 2.2D X 24H
FOOTBOARD FM-081-MO 38W X 2.2D X 18H
HEADBOARD
FOOTBOArD
w w w. S M F u r n i t u r e . c o M | 7 5 7 - 6 2 4 - 9 0 2 5
WARDROBE FM-050-C 45W X 27D X 70.4H
4-DRAWER TV CHEST FM-009-C-DVD 36W X 20D X 44H
4-DRAWER CHEST FM-009-C 36W X 20D X 37.5H
FreemAsoN
WArdroBe , cHesT s & d r esser s
3-DRAWER TV CHEST FM-008-C-DVD 36W X 20D X 37.5H
N iG HT sTA N d s 1-DRAWER NIGHTSTAND FM-001-C-30 30W X 18D X 25H 3-DRAWER CHEST FM-008-C 36W X 20D X 30H
FM-001-C-24 24W X 18D X 25H
6-DRAWER DRESSER FM-012-C 60W X 20D X 30H
FM-001-C-20 20W X 18D X 25H
TABL es & desKs 2-DRAWER NIGHTSTAND FM-002-C-30 30W X 18D X 25H FM-002-C-24 24W X 18D X 25H FM-002-C-20 20W X 18D X 25H ADA DESK FM-026-MO-ADA 42W X 22D X 30H
DESK FM-026-MO 30W X 18D X 30H
COFFEE TABLE FM-288-MO 42W X 24D X18H
END TABLE FM-277-MO 20W X 25D X 25H
mirror
DEMILUNE TABLE FM-100-MO 24W X 16D X 36H
VERTICAL MIRROR FM-028-VM 26W X 1.5D X 46H
9
R
Redgate
edgate is the perfect collection for those seeking clean modern furniture. The Redgate Collection has a simple elegance thanks
to well designed features that include recessed panels, curved
handles and a rich, dark finish. In addition to the standard pieces available in all lines, Redgate offers a three-drawer nightstand.
w w w. S M F u r n i t u r e . c o m | 7 5 7 - 6 2 4 - 9 0 2 5
redGATe
The redgate Collection features recessed panels.
redgate’s 3-Drawer Chest is available in widths of 30, 36 and 42 inches.
DRAWER PULL Berenson 7016-1BPN-P Brushed Nickel
11
R E D G AT E
FUrNiTUre
WARDROBE
porTFoLio
WAL L U Ni T s
WALL UNIT A-WU-103 149W X 24D X 78H
DESK A-WU-103-B 77W X 24D X 30H
WARDROBE A-WU-103-A 36W X 24D X 78H
BRIDGE A-WU-103-C 77W X 24D X 48H
WALL UNIT A-WU-1024 125W X 24D X 78H
DESK A-WU-1024-B 77W X 22D X 30H
WARDROBE A-WU-1024-A 24W X 24D X 78H
BRIDGE A-WU-1024-C 77W X 22D X 48H
3-DrAWer CHeST (42W)
CABINET A-WU-1024-D 24W X 24D X 78H
3-DrAWer CHeST (36W)
3-DrAWer NIGHTSTAND
mirror MIRROR rG-028-VM 27.5W X 1.5D X 42.5H
HEADBOARD
FOOTBOArD
w w w. S M F u r n i t u r e . c o M | 7 5 7 - 6 2 4 - 9 0 2 5
4-DRAWER TV CHEST rG-009-C-DVD 36W X 24D X 54H
Bed s
3-DRAWER TV CHEST rG-008-C-DVD 36W X 24D X 44H
4-DRAWER CHEST rG-009-C 36W X 24D X 46H
redGATe
cHesTs & dresser s
HEADBOARD rG-091-MO 38W X 2.2D X 24H
3-DRAWER CHEST rG-008-C-30 30W X 24D X 36H rG-008-C-36 36W X 24D X 36H rG-008-C-42 42W X 24D X 36H
6-DRAWER DRESSER rG-012-C 57W X 24D X 36H
FOOTBOARD rG-081-MO 38W X 2.2D X 18H
NiGHTs TA Nd s
1-DRAWER NIGHTSTAND rG-001-C-18: 18W X 18D X 24H rG-001-C-20: 20W X 18D X 24H rG-001-C-24: 24W X 18D X 24H
2-DRAWER NIGHTSTAND rG-002-C-18: 18W X 18D X 27H
3-DRAWER NIGHTSTAND rG-003-C-24: 24W X 18D X 30H
rG-002-C-20: 20W X 18D X 27H rG-002-C-24: 24W X 18D X 27H
TABL es & d esK
DESK rG-026-MO 42W X 22D X 30H
COFFEE TABLE rG-288-MO 42W X 22D X17H
END TABLE rG-277-MO 22W X 26D X 24H
13
Specifications terMs & Conditions
General ConstruCtion
All orders are subject to available line time and management approval. All orders must be in writing and shall be deemed accepted when the corporate office in Norfolk, VA issues a written acknowledgment. This confirmation serves as a contract once signed between SMCO and the buyer.
• Panels and joints doweled, glued and pocket screwed in two directions. All cases accurately fitted and rigidly secured under pressure using European case clamp techniques. • Commercial grade glue with all excess glue cleaned from surfaces exposed during normal use. • All structural members glued and screwed in place. • All tops (unless otherwise specified) surfaced with high pressure laminate with a minimum 45 lb. density industrial grade particle board core with fine face particles and proper backing sheet to prevent warping. Tops are laminated using contact, semi-rigid (PVAC), or rigid (ureas, resorcinol) adhesives, to provide for type two (2) bondage. Edges, as specified by customer, are either wood, veneer, MDF, or self edged. Where marble, granite or similar approved tops are used, a sub-top of 1⁄2” (minimum) plywood will be provided. • Off the floor cases over 60” in length have center supports. • All screws, square headed #8 and #10, with sufficient screw bite where applicable. • Clamp nails used on mitered bases and aprons where applicable. • Wood dowels 8mm D x 35mm L hardwood. • Drawer front construction 3⁄4” thick cores, 3-ply veneer edged banding on all four sides. Solid wood with edge profile if specified. Five (5) sided box construction, with 1⁄2”, 9-ply, Baltic birch, sanded and splinter free. Dovetail construction. Bottoms 1/8” thick white epoxy-coated masonite, resistant to spills and stains. All perimeter construction bead glued, wood blocked and captured. • Side mounted steel ball-bearing glides, 100LB. H.D., positive out stop, lifetime guarantee. Mounted with wood rails and appropriate screws.
line time
Total estimated line time for most jobs is 8 to 10 weeks. The line time on an order begins when SMCO has verified the validity of the items ordered by the receipt of the deposit and the signed confirmation, accepting all terms, by the buyer.
shipping FOB Factory, Norfolk, VA. All quotations are based upon shipping blanket wrapped via air-ride trailers, with driver assist, full replacement insurance. While we will help coordinate all bids and deliveries and help with any freight claims, all charges and terms are negotiated strictly between the buyer and shipper. All shipments must be carefully inspected for shortages, and visible and concealed damage upon arrival. All freight claims must be noted on the carrier receipt and signed by the delivering driver. Freight claims are to be filed directly with the shipper.
IMPORTANT NOTE: There is an upcharge per case if cartons are required.
Credit & Payment terms 50% Deposit with order entry / Balance Net 10; or, 1/3 Deposit with order entry, 1/3 prior to shipment and 1/3 Net 10, upon credit approval. A credit application will be furnished. Invoices relevant to partial shipments are payable as they fall due.
Custom Capabilities
As part of our endeavor to offer the buyer every resource available through SMCO we routinely offer assistance with custom design and special size requirements. This design service has been used by scores of clients for the realization of their concepts. We welcome your ideas and special needs, and will carefully review them and submit a cost proposal for your consideration. The feasibility of this program is dependent, of course, on minimum quantity limitations; the scope of our capabilities is otherwise nearly unlimited. Once the client has verified that pricing is within their budget requirements, SMCO will develop and forward furniture drawings and elevations.
Warranty All merchandise is manufactured in accordance with our high industrial and design standards and is warranted to be free from defects in material and workmanship for a period of five years, and protected with a lifetime guarantee on all drawer slides, from the date of delivery or placement in storage. This warranty covers goods under normal use and in service under conditions for which the merchandise was designed. Our obligation during the warranty period is limited to repair or replacement at our option. This warranty becomes null and void on any goods repaired or altered by any person not so authorized by SMCO or any merchandise which has been subject to misuse, improper storage, or negligence.
Materials • All exposed wood and unexposed solid parts made from select hardwoods and are sound with no splits, checks, knots, tears, open glue lines, wormholes, windshades or other defects that might affect strength or appearance. • All unexposed solid wood members are hardwood and are free from defects which would affect appearance or serviceability. All wood materials kiln-dried to moisture content of 6 to 7%. • Exposed veneer surfaces shall be select sliced hardwood, and are matched as to pattern and color. All face veneers and balancing back veneers shall be applied with waterproof glue under controlled pressure. To control and contain veneer checking, all crossbands for fancy-faced veneer have uniform multi-directional strengths. • High-pressure laminates meet the federal specification common to the industry (LP508H). Minimum standards for casegood tops are:
Formica Micarta Nevamar Pionite Wilsonart
GP .030 GP .030 GP .030 GP .030 GP .030
• The use of P.F. and HF4 grades of laminate is used on vertical applications if specified. • Wood, particleboard or MDF cores shall conform to commercial standards Type 1, Grade B, Class II. 45 lb. density industrial weight. 3-to-5 ply construction with backer, 3⁄4“ thick. • Hardware, unless otherwise specified, can be selected from our website. All hardware is coated to prevent rusting and tarnishing. Lancaster finish unless otherwise noted in customers specification.
Specifications WorkManshiP
aPPearanCe & Finish
All work is conducted under direct supervision of competent and experienced woodworking specialists and engineers.
• Color of like finishes are color-fast, uniform, and compatible between pieces manufactured in the plant. • Each finishing material is formulated and the individual batch checked to insure compatibility with the batch and every other material used to produce a color-fast finishing system. • Distressing, shading, highlighting and splatter in any one group shall be consistent and uniform between pieces and from one cutting to another. • Interior surfaces of compartments and drawers are to be free of dirt, dust, shavings or any foreign matter prior to finishing. • Finish rubbed to required smoothness and sheen and dried to prevent marring or printing on the surface when packed. • Edges and backs of doors and drawers are finished to be compatible with exterior. • Excess pumice, oil, wax and rubbing compound is wiped clean after rubbing.
• Backs are captured and screwed on for secure fit. All backs are recessed for cord management. All nightstand backs are vented. • Bottoms and legs are solid hardwood. If a plinth base is used with side panels to the floor, the bottom edge will be sealed with PVC edgebanding. All cases have either carpet glides or leg levelers. • Doors are to be free of rattle, squeaking, warp or rubbing. All doors to be approximately uniform in clearance. Catches properly aligned and installed. • Drawers are free-running with no binding or sticking. Drawers with side mounted metal glides shall operate freely with no squeaking or rattling. Drawer guides and runners securely fastened and properly positioned to assure correct drawer alignment. • Route lines, cut-outs, or grooves smoothly machined and/or sanded. Shapes, carvings, and “U” cuts are to be finished smoothly with no visible unfinished or rough areas. • Drawer interiors and storage compartments are to be sanded smooth and free of glue or lacquer runs. Sides, ends and bottoms are to be free of splinters, snags, slivers, staples, nails and screws. • Hardware, such as hinges, pulls, latches, catches, glides, etc., attached so they fit and operate properly and serve their purposes during transit and use. • Mitered corners to be square, flush, tight and well-glued • Interior screws flush or countersunk, except on drawer heads, with the surface of the part where used. • Glides, casters and ferrules properly attached to remain permanently in place at all times. • Face-nailed molding and overlaps nailed as inconspicuously as possible with nails countersunk and filled where applicable. Backnailing used whenever possible. • All desk tops and oversized pieces are reinforced with a solid member or metal sag rail on the front edge, or with an H-section solid wood brace as appropriate. • All items furnished under this section shall be guaranteed against manufacturing defects in workmanship and materials. Repairs of such defects during the first year, after final completion and acceptance, shall be made by the manufacturer at its cost and expense without charge to the purchaser or the facility. All such replacements and repairs shall be made at a time and at hours mutually satisfactory to both the owner and factory.
our 9-step Finishing Process 1 All pieces sprayed with wiping stain and/or washcoat and/or toner. 2 Filler applied as required to fill wood pores. All excess filler is removed and allowed to dry. 3 Sprayed with sealer of not less than 16% to 20% solid content. 4 Sealer is sanded smooth, finishing with paper. 5 Shade with shading stain as required to obtain uniform color and effect. 6 Glaze when required for effect and wipe. 7 Sprayed with two coats of moisture-resistant lacquer (sanded between lacquers). 8 Rubbed with steel wool, wet or dry finishing paper, waxed and wiped clean as desired for the required sheen specified. 9 Laminate surfaces are cleaned with cleaning agents and wiped dry before packing.
2701 Saint Julian Avenue Norfolk, VA 23504 p: 757.624.9025 f: 757.624.9015 www.smfurniture.com