2001 SUPER DUTY F-650/750 INDEX Subject Model/Series/Trim Availability Standard Equipment Specifications: — Regular Cab Chassis (158?-260” WB) — Regular Cab Chassis (182”-260” WB) — Regular Cab Chassis (194”-260” WB)

Page Number 2

3-4 5-6 7-8

Technical Specifications: — Axles — Brakes — Bumpers — Cooling System — A/C and Fuel System — Steering — Suspension (Frame/Shocks/Springs/Etc.) — Tires and Wheels — Transmissions, Clutch and U-joints

9 9-10 11 11 12 12 13-14 14 15-17

Weight Ratings (Curb Weights)

18-20

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 1

2001 SUPER DUTY F-650/750 MODEL/SERIES/TRIM AVAILABILITY Trim Level Series F650

Drive 4x2

Cab Style

Regular Super Cab Regular Cab Regular/Crew Cab Super Cab Regular/Crew Cab Regular/Super/Crew Cab F750 4x2 Regular Super Cab Regular Cab Regular/Crew Cab Super Cab Regular/Crew Cab Regular/Super/Crew Cab (1) Available with Crew Cab only.

2 2001 SUPER DUTY F-650/750

Wheelbase (in.)

Box Style

Rear Wheels

158 179 182 194 215 230 260

Chassis Chassis Chassis Chassis Chassis Chassis Chassis

DRW DRW DRW DRW DRW DRW DRW

n n n n n n n

158 179 182 194 215 230 260

Chassis Chassis Chassis Chassis Chassis Chassis Chassis

DRW DRW DRW DRW DRW DRW DRW

n n n n n n n

XL

n n n n n n n

XLT

Super CrewZer (AB2AD)(1)

n

n n n n n n n

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 STANDARD EQUIPMENT SPECIFICATIONS Regular Chassis Cab (158 ″− 260 ″ wb.) DRIVE: GVWR: (lbs.) POWERTRAIN: Engine

—

Engine

—

Transmission

—

Clutch Front Axle Rear Axle

Universal Joint BRAKES: System

— — — — — — — —

4x2 F-650 4x2 F-750 24,500(1)/26,000 30,000/33,000 50 states certified Type Cummins B 5.9L (185 HP/2300 RPM and 420 lb.-ft. torque) and includes integral engine mounted oil cooler, Donaldson single stage dry-type air cleaner, intake air heater, EPDM rubber hoses, warning & depower system, Eaton fan clutch, PIA unheated fuel/ water separator, disposable spin-on single full-flow 1-quart oil filter, 28 MT starter and electromechanical governor/ fuel system controls (F-650 26,000/F-750 30,000 GVWR’s only) Type CAT 3126B (210 HP/2500 RPM and 605 lb.-ft. torque) and includes the same as Cummins B 5.9L engine except as listed; Heated fuel/water seperator (fuel/water seperator w/ heated water-in-fuel sensor with 7.3L Diesel only) and 37 MT starter (F-750 33,000 GVWR only) Type Eaton FS-4205A Manual Eaton FS-6306A Manual (F-750 33,000 GVWR only) Speeds 5-Speed Direct 6-Speed Direct Type Spicer SOLO ceramic 1-Plate, self-adjusting, hydraulic pull-type controls Diameter 14 in. Type Single I-Beam IFS, Ford with Greasable Drag Link & Tie Rods Capacity (Rating @ Ground) 9,000 lbs. 9,000/12,000 lbs. Type Meritor RS-17-145 Single-Spd. with Meritor RS-21-145 Single-Spd. with magnetic traps/drain/fill plugs magnetic traps/drain/fill plugs Capacity (Rating @ Ground) 17,500 lbs. w/4.11 gear 21,000 lbs. w/4.11 gear Type 1550 Size 1550/1710 Size

— Type

Front — Type Rear — Type Compressor Anti-Lock System Parking Brake (Rr Brakes) Moisture Ejectors Dust Shields ELECTRICAL: Alternator — Rating Battery — Type — Rating — Box Location EXHAUST Type FUEL TANK: — Capacity STEERING: — Type — Ratio SUSPENSION: Frame

— Type — Section Modulus (cu. in.)

Shock Absorbers, Type Front Springs, Front — Type — Rating @ Ground (min.) Springs, Rear WHEEL SEALS TIRES: Front

— Type — Rating @ Ground (min.) Type — Type — Size

New or Revised — 7/25/00

Hydraulic (Split Brake) (Std. with F650 26K/F-750 30K GVWR only) 15” Cast Disc 15” x 6” Cast Disc

Air (Std. with 33,000 lb. GVWR Only) (Includes Auto. slack adjusters) 15”x4” Cam Cast Drum Air 16.5” x7” Cam Cast Drum Air Bendix 13.2 CFM, Air

Frt/Rr 4 - Wheel Manual Park Brake controlled by floor Maxi, driveline mtd. with air brakes mounted hand lever Manual Drain Cocks with air brakes Std. (33,000 GVWR) Motorcraft , 115 Amperes, 1725 Watt, Internal regulated (6G) Maintenance-Free Dual, 93 Amp-hr., 625 CCA LH Frame mounted under cab RH Single Horizontal RH black steel 50.0 Gal. (189 L) with integral cab steps Integral Power, TRW TAS-55 gear TAS-65 gear (F-750/33K GVWR) (F-650/26K and F-750/30K GVWR) 20.4:1 Ladder Type, 50,000 psi Steel w/rein- Ladder Type, 110,000 psi Steel (33K forcement (26/30K GVWR) and w/o GVWR only) reinforcement (24.5K GVWR) 10.2 (24.5K GVWR)/18.0 (26/30K 15.9 (33K GVWR only) GVWR) 1.38 “ Double Acting Telescopic Multi-leaf 54” spread 8500 lbs.

9000 lbs. (30K GVWR) 12000 lbs. (33K GVWR) Multi-leaf Multi-leaf 17,500 lbs. 21,000 lbs. Front Greased and Rear “Scotseal” wet type unitized

Goodyear G159 Radial Two, 9Rx22.5 (14) (24.5K GVWR)/ Two, 10Rx22.5 (12) (26K GVWR)

Two, 10Rx22.5 (14) (30K GVWR) Two, 11Rx22.5 (14) (33K GVWR)

2001 SUPER DUTY F-650/750 3

2001 SUPER DUTY F-650/750 STANDARD EQUIPMENT SPECIFICATIONS Regular Chassis Cab (158 ″− 260 ″ wb.) Rear

WHEELS: Front

Rear

— Type — Size

Goodyear G124 Radial Four, 9Rx22.5 (14) (24.5K GVWR)/ Four, 10Rx22.5 (12) (26K GVWR)

— Type — Size

10-Hole Painted White Steel Disc Two, 22.5x7.50 ISO (26K GVWR)

— Type

10-Hole Painted White Steel Disc Four, 22.5x7.50 ISO (26K GVWR)

Four, 10Rx22.5 (14) (30K GVWR) Four, 11Rx22.5 (14) (33K GVWR)

Two, 22.5x7.50 ISO (30K GVWR) Two, 22.5x8.25 ISO (33K GVWR) Four, 22.5x7.50 ISO (30K GVWR Four, 22.5x8.25 ISO (33K GVWR)

(1) New 24,500 lb. GVWR is available and standard with F-650 (HFC-0103).

4 2001 SUPER DUTY F-650/750

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 STANDARD EQUIPMENT SPECIFICATIONS Super Cab Chassis Cab (179 ″ - 260 ″ wb.) DRIVE: GVWR: (lbs.) POWERTRAIN: Engine

—

Engine

—

Transmission

— —

Clutch Front Axle Rear Axle

Universal Joint BRAKES: System

— — — — —

4x2 F-650 4x2 F-750 24,500(1)/26,000 30,000/33,000 50 states certified Type Cummins B 5.9L (185 HP/2300 RPM and 420 lb.-ft. torque) and includes integral engine mounted oil cooler, Donaldson single stage dry-type air cleaner, intake air heater, EPDM rubber hoses, warning & depower system, Eaton fan clutch, PIA unheated fuel/ water separator, disposable spin-on single full-flow 1-quart oil filter, 28 MT starter and electromechanical governor/ fuel system controls (F-650 26,000/F-750 30,000 GVWR’s only) Type CAT 3126B (210 HP/2500 RPM and 605 lb.-ft. torque) and includes the same as Cummins B 5.9L engine except as listed; Heated fuel/water seperator (fuel/water seperator w/ heated water-in-fuel sensor with 7.3L Diesel only) and 37 MT starter (F-750 33,000 GVWR only) Type Eaton FS-4205A Manual Eaton FS-6306A Manual (F-750 33,000 GVWR only) Speeds 5-Speed Direct 6-Speed Direct Type Spicer SOLO ceramic 1-Plate, self-adjusting, hydraulic pull-type controls Diameter 14 in. Type Single I-Beam IFS, Ford with Greasable Drag Link & Tie Rods Capacity (Rating @ Ground) 9,000 lbs. 9,000/12,000 lbs. Type Meritor RS-17-145 Single-Spd. with Meritor RS-21-145 Single-Spd. with magnetic traps/drain/fill plugs magnetic traps/drain/fill plugs Capacity (Rating @ Ground) 17,500 lbs. w/4.11 gear 21,000 lbs. w/4.11 gear Type 1550 Size 1550/1710 Size

— Type

Front — Type Rear — Type Compressor Anti-Lock System Parking Brake (Rr Brakes) Moisture Ejectors Dust Shields ELECTRICAL: Alternator — Rating Battery — Type — Rating — Box Location EXHAUST Type FUEL TANK: — Capacity STEERING: — Type — Ratio SUSPENSION: Frame

— Type — Section Modulus (cu. in.)

Shock Absorbers, Type Front Springs, Front — Type — Rating @ Ground (min.) Springs, Rear WHEEL SEALS TIRES:

— Type — Rating @ Ground (min.) Type

New or Revised — 7/25/00

Hydraulic (Split Brake) 15” Cast Disc 15” x 6” Cast Disc

Air (Std. with 33,000 lb. GVWR Only) (Includes Auto. slack adjusters) 15”x4” Cam Cast Drum Air 16.5” x7” Cam Cast Drum Air Bendix 13.2 CFM, Air

Frt/Rr 4 - Wheel Manual Park Brake controlled by floor Maxi, driveline mtd. with air brakes mounted hand lever Manual Drain Cocks with air brakes Std. (33,000 GVWR) Motorcraft , 115 Amperes, 1725 Watt, Internal regulated (6G) Maintenance-Free Dual, 93 Amp-hr., 625 CCA LH Frame mounted under cab RH Single Horizontal RH black steel 50.0 Gal. (189 L) with integral cab steps Integral Power, TRW TAS-55 gear TAS-65 gear (F-750/33K GVWR) (F-650/26K and F-750/30K GVWR) 20.4:1 Ladder Type, 50,000 psi Steel w/rein- Ladder Type, 110,000 psi Steel (33K forcement (26/30K GVWR) and w/o GVWR only) reinforcement (24.5K GVWR) 10.2 (24.5K GVWR)/18.0 (26/30K 15.9 (33K GVWR only) GVWR) 1.38 “ Double Acting Telescopic Multi-leaf 54” spread 8500 lbs.

9000 lbs. (30K GVWR) 12000 lbs. (33K GVWR) Multi-leaf Multi-leaf 17,500 lbs. 21,000 lbs. Front Greased and Rear “Scotseal” wet type unitized

2001 SUPER DUTY F-650/750 5

2001 SUPER DUTY F-650/750 STANDARD EQUIPMENT SPECIFICATIONS Super Cab Chassis Cab (179 ″ - 260 ″ wb.) Front

Rear

WHEELS: Front

Rear

— Type — Size — Type — Size

Goodyear G159 Radial Two, 9Rx22.5 (14) (24.5K GVWR)/ Two, 10Rx22.5 (12) (26K GVWR) Goodyear G124 Radial Four, 9Rx22.5 (14) (24.5K GVWR)/ Four, 10Rx22.5 (12) (26K GVWR)

— Type — Size

10-Hole Painted White Steel Disc Two, 22.5x7.50 ISO (26K GVWR)

— Type

10-Hole Painted White Steel Disc Four, 22.5x7.50 ISO (26K GVWR)

Two, 10Rx22.5 (14) (30K GVWR) Two, 11Rx22.5 (14) (33K GVWR) Four, 10Rx22.5 (14) (30K GVWR) Four, 11Rx22.5 (14) (33K GVWR)

Two, 22.5x7.50 ISO (30K GVWR) Two, 22.5x8.25 ISO (33K GVWR) Four, 22.5x7.50 ISO (30K GVWR Four, 22.5x8.25 ISO (33K GVWR)

(1) New 24,500 lb. GVWR is available and standard with F-650 (HFC-0103).

6 2001 SUPER DUTY F-650/750

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 STANDARD EQUIPMENT SPECIFICATIONS Crew Cab Chassis Cab (194 ″ - 260 ″ wb.) DRIVE: GVWR: (lbs.) POWERTRAIN: Engine

—

Engine

—

Transmission

— —

Clutch Front Axle Rear Axle

Universal Joint BRAKES: System

— — — — —

4x2 F-650 4x2 F-750 24,500(1)/26,000 30,000/33,000 50 states certified Type Cummins B 5.9L (185 HP/2300 RPM and 420 lb.-ft. torque) and includes integral engine mounted oil cooler, Donaldson single stage dry-type air cleaner, air cleaner restriction indicator (air cleaner mtd), intake air heater, EPDM rubber hoses, engine protection system - warning & depower system, Eaton fan clutch, fuel/ water separator with heated water in fuel sensor, disposable spin-on single full-flow 1-quart oil filter, 28 MT starter and electromechanical governor/fuel system controls (F-650 24,500/26,000/F-750 30,000 GVWR’s only) Type CAT 3126B (210 HP/2500 RPM and 605 lb.-ft. torque) and includes the same as Cummins B 5.9L engine except as listed; Unheated fuel/water seperator and 37 MT starter (F-750 33,000 GVWR only) Type (Mineral based fluid) Eaton FS-4205A Manual Eaton FS-6306A Manual (F-750 33,000 GVWR only) Speeds 5-Speed Direct 6-Speed Direct Type Spicer SOLO ceramic 1-Plate, self-adjusting, hydraulic pull-type controls Diameter 14 in. Type Single I-Beam IFS, Ford with Greasable Drag Link & Tie Rods Capacity (Rating @ Ground) 9,000 lbs. 9,000/12,000 lbs. Type Meritor RS-17-145 Single-Spd. with Meritor RS-21-145 Single-Spd. with magnetic traps/drain/fill plugs magnetic traps/drain/fill plugs Capacity (Rating @ Ground) 17,500 lbs. w/4.11 gear 21,000 lbs. w/4.11 gear Type 1550 Size 1550/1710 Size

— Type

Front — Type Rear — Type Compressor Anti-Lock System Parking Brake (Rr Brakes) Moisture Ejectors Dust Shields ELECTRICAL: Alternator — Rating Battery — Type — Rating — Box Location EXHAUST Type FUEL TANK: — Capacity STEERING: — Type — Ratio SUSPENSION: Frame

— Type — Section Modulus (cu. in.)

Shock Absorbers, Type Front Springs, Front — Type — Rating @ Ground (min.) Springs, Rear WHEEL SEALS

— Type — Rating @ Ground (min.) Type

New or Revised — 7/25/00

Hydraulic (Split Brake) 15” Cast Disc 15” x 6” Cast Disc

Air (Std. with 33,000 lb. GVWR only) (Includes Auto. slack adjusters) 15”x4” Cam Cast Drum Air 16.5” x7” Cam Cast Drum Air Bendix 13.2 CFM, Air

Frt/Rr 4 - Wheel IManual Park Brake controlled by floor Maxi, driveline mtd. with air brakes mounted hand lever Manual Drain Cocks with air brakes Std. (33,000 GVWR) Motorcraft , 115 Amperes, 1725 Watt, Internal regulated (6G) Maintenance-Free Dual, 93 Amp-hr., 625 CCA LH Frame mounted under cab RH Single Horizontal Muffler/Pipe RH black steel 50.0 Gal. (189 L) with integral cab steps Integral Power, TRW TAS-55 gear TAS-65 gear (F-750/33K GVWR) (F-650/26K and F-750/30K GVWR) 20.4:1 Ladder Type, 50,000 psi Steel w/rein- Ladder Type, 110,000 psi Steel (33K forcement (26/30K GVWR) and w/o GVWR only) reinforcement (24.5K GVWR) 10.2 (24.5K GVWR)/18.0 (26/30K 15.9 (33K GVWR only) GVWR) 1.38 “ Double Acting Telescopic Multi-leaf 54” spread 8500 lbs.

9000 lbs. (30K GVWR) 12000 lbs. (33K GVWR) Multi-leaf Multi-leaf 17,500 lbs. 21,000 lbs. Front Greased and Rear “Scotseal” wet type unitized

2001 SUPER DUTY F-650/750 7

2001 SUPER DUTY F-650/750 STANDARD EQUIPMENT SPECIFICATIONS Crew Cab Chassis Cab (194 ″ - 260 ″ wb.) TIRES: Front

Rear

WHEELS: Front

Rear

— Type — Size — Type — Size

Goodyear G159 Radial Two, 9Rx22.5 (14) (24.5K GVWR)/ Two, 10Rx22.5 (12) (26K GVWR) Goodyear G124 Radial Four, 9Rx22.5 (14) (24.5K GVWR)/ Four, 10Rx22.5 (12) (26K GVWR)

— Type — Size

10-Hole Painted White Steel Disc Two, 22.5x7.50 ISO (26K GVWR)

— Type

10-Hole Painted White Steel Disc Four, 22.5x7.50 ISO (26K GVWR)

Two, 10Rx22.5 (14) (30K GVWR) Two, 11Rx22.5 (14) (33K GVWR) Four, 10Rx22.5 (14) (30K GVWR) Four, 11Rx22.5 (14) (33K GVWR)

Two, 22.5x7.50 ISO (30K GVWR) Two, 22.5x8.25 ISO (33K GVWR) Four, 22.5x7.50 ISO (30K GVWR Four, 22.5x8.25 ISO (33K GVWR)

(1) New 24,500 lb. GVWR is available and standard with F-650 (HFC-0103).

8 2001 SUPER DUTY F-650/750

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 TECHNICAL SPECIFICATIONS Axles FRONT AXLE SPECIFICATIONS Regular/Super/Crew Cab Chassis Models Make Max. Rating @ Ground (lbs.) Axle — — — King Pins — Spindle Wheel Bearings

Type Material Spring Centers (in.) Material

— Material — Type

Ford 9000 I-Beam w/King Pin Spindles Forged Steel 32.12 Steel Backed Bronze, Lubed with Grease Fittings Forged Alloy Steel Tapered Roller; Timken

Ford 12000 I-Beam w/King Pin Spindles Forged Steel 34.00 Steel Backed Bronze, Lubed with Grease Fittings Forged Alloy Steel Tapered Roller; Timken

REAR AXLE SPECIFICATIONS Regular/Super/ Crew Cab Chassis Series/Model Make Max. Rat. @ Ground (lbs.) Type Drive Housing — Type — Material — Cover Attachment Lubricant Capacity (pt.) Wheel Bearings — Type Gears Ring Gear Pinion Differential Axle Shaft

— — — — — —

Type Pitch Diameter (in.) Mounting Type Bearings Minimum Diameter (in.) — Diameter over Splines (in.) — No. of Splines (Hub End)

Meritor Single Drive/ Speed 15,000 Full-Floating Single Banjo Hot Forged Steel Welded 32.9 Tapered Roller-Fluid Lubricated; Timken Hypoid - Generoid 15.00x2.18 Straddle Four Pinion Tapered Roller 1.88

Meritor Single Drive/Speed 17,500 Full-Floating Single Banjo Hot Forged Steel Welded 32.9 Tapered RollerFluid Lubricated; Timken Hypoid - Generoid 15.00x2.18 Straddle Four Pinion Tapered Roller 1.88

Meritor Single Drive/Speed 21,000 Full-Floating Single Banjo Hot Forged Steel Welded 32.5 Tapered RollerFluid Lubricated; Timken Hypoid - Generoid 15.00x2.18 Straddle Four Pinion Tapered Roller 2.00

Meritor Single Drive/Speed 23,000 Full-Floating Single Banjo Hot Forged Steel Welded 32.5 Tapered RollerFluid Lubricated; Timken Hypoid - Generoid 15.00x2.18 Straddle Four Pinion Tapered Roller 2.00

2.00

2.00

2.10

2.10

39

39

41

41

Brakes HYDRAULIC BRAKE EQUIPMENT SPECIFICATIONS — FRONT/REAR DISC

Rotor Dia. (in.) Type Series/Model Axle (lbs.) OD Front Disc- Regular/Super/ 9000 15.38 Hydraulic Crew Cab Chassis Rear DiscRegular/Super/ 17500/ 15.38 Hydraulic Crew Cab 21000/ Chassis 23000 Frt/Rr Disc- F-650 Lo9000/ 15.38 Hydraulic Profile 17500 Regular/Super/ Crew Cab Chassis(1) (1) Late Availability.

New or Revised — 7/25/00

Gross Lining Area Per Axle (sq. in.) 83.60

Total Swept Area Per Axle (sq. in.) 398.60

Brake Lining Segment Outboard

Thickness (in.) 1.535

Caliper Piston No.Dia. (in.) Four/2.75

Outboard

1.535

Four/2.75 83.60

398.60

Outboard

1.535

Four/2.50 83.60

398.60

2001 SUPER DUTY F-650/750 9

2001 SUPER DUTY F-650/750 TECHNICAL SPECIFICATIONS AIR BRAKE EQUIPMENT SPECIFICATIONS — FRONT DRUM

Type Meritor Air/ Cam Actuated Meritor Air/ Cam Actuated

Axle Series/Model (lbs.) Regular/Super/ 9000 Crew Cab Chassis Regular/Super/ 12000 Crew Cab Chassis

Brake size (in.) 15x4 15x4

Lining Type/Lining Area Thickness Per Axle Brake Type (in.) (sq. in.) “Q” Double Non-Asbestos/.73 230 Anchor Pin “Q” Double Non-Asbestos/.73 230 Anchor Pin

Chamber Type/ Volume (sq. in.)/ (cu. in.) 16/53.9 20/56

Dust Shield Remove able Remove able

AIR BRAKE EQUIPMENT SPECIFICATIONS — REAR DRUM

Type Meritor Air/ Cam Actuated Meritor Air/ Cam Actuated Meritor Air/ Cam Actuated

Axle Usage Model/ Series (lbs.) Regular/Super/ 17500 Crew Cab Chassis Regular/Super/ 21000 Crew Cab Chassis Regular/Super/ 23000 Crew Cab Chassis

Chamber Type/ Type/Lining Lining Area Volume Brake Size Thickness Per Axle (sq. (sq. in.)/ (in.) Brake Type (in.) in.) (cu. in.) 16.5x7 “Q” Double Non-Asbestos/.850 440 30/86 Anchor Pin

Dust Shield Removeable

16.5x7

“Q” Double Non-Asbestos/.850 440 Anchor Pin

30/86

Removeable

16.5x7

“Q” Double Non-Asbestos/.850 440 Anchor Pin

30/86

Removeable

HYDRAULIC BRAKE MASTER CYLINDER SPECIFICATIONS Type Dual System, Dash-Mounted

Model/Series All

Piston Dia. (in.) 2.00

Stroke (in.)

Fluid Displacement Ratio (Prim/Sec)

2.25

50 Frt/50 Rr

Nonimal Displacement (Prim/Sec) (Cu. In.) 3.35/3.35

HYDRAULIC BRAKE BOOSTER SPECIFICATIONS Mounting

Type Bosch/Hydromax II

Model/Series All

Booster Stroke (in.) To Cowl with Mas- 2.468 ter Cylinder

AIR COMPRESSOR SPECIFICATIONS Make/Mode Bendix 2-Cyl./Tu-Flo 550

Compressor Size (Bore x Stroke) (in.) 2.780 x 1.580

Cooling

Lubrication

Drive

Water

Engine Oil

Gear

AIR BRAKE AIR DRYER SPECIFICATIONS Make Bendix

Model AD-IP

Type Desiccant

Remarks Heated

AIR BRAKE SLACK ADJUSTER SPECIFICATIONS Axle Front and Rear

Make Gunite

10 2001 SUPER DUTY F-650/750

Description Automatic adjusting, 5.5”, load/clearance sensing design, 360 degrees rotating worm & gear, cam radius: 0.5”

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 TECHNICAL SPECIFICATIONS Bumpers BUMPER SPECIFICATIONS Trim Level XL

Size 92.59” wide x 16.72” deep (0.15”) thick (0.25” thick)

XLT

Material Full-width steel

Finish Painted platinum

1-piece, full-width steel, HD

Chrome plated

Cooling Systems COOLING SYSTEM SPECIFICATIONS Trans. Usage Cooling (Man/ (1) Auto) Std. Man

Core Size (in.) Frontal Area (sq. Thick in.) 750 1.65

Rows of Tubes Total 67

Fins Per Inch 16

Engine Cummins 5.9E ISB Diesel (185 HP) Cummins Std. Man 750 1.65 67 16 5.9E ISB Diesel (205 HP) Cummins Std. Auto 750 1.65 67 16 5.9E ISB Diesel (210 HP) Cummins Std. Man 750 1.65 67 16 5.9E ISB Diesel (215/ 225 HP) Powerstroke Std. Auto 750 1.65 67 16 7.3L Turbo Diesel (210 HP/520 trq) Powerstroke Std. Man 750 1.65 67 16 7.3L Turbo Diesel (210 HP/520 trq) CAT 3126B Std. Man 750 1.65 67 16 Diesel (190 HP) CAT 3126B Std. Man 750 1.65 67 16 Diesel (210 HP) CAT 3126B Std. Auto 750 1.65 67 16 Diesel (210 HP) CAT 3126B Std. Man 750 1.65 67 16 Diesel (230 HP) CAT 3126B Std. Auto 750 1.65 67 16 Diesel (230 HP) CAT 3126B Std. Man 750 1.65 67 16 Diesel (250 HP) CAT 3126B Std. Auto 750 1.65 67 16 Diesel (250 HP) (1) Automatic Transmissions include trans. cooler in radiator outlet tank.

New or Revised — 7/25/00

Fan Specifications Cooling System Blade Capacity No. of Dia. qts. (litres) Type Blades (in.) 24.4 (23.1) Plastic 9 22.0

Clutc h Type Eaton 610

24.4 (23.1) Plastic 9

24.0

Eaton 660

23.4 (22.1) Plastic 9

26.0

Eaton 690

24.4 (23.1) Plastic 9

24.0

Eaton 660

25.5 (24.1) Plastic 9

26.0

Eaton 690

26.5 (25.1) Plastic 9

24.0

Eaton 660

28.4 (26.9) Plastic 9

24.0

Eaton 660

28.4 (26.9) Plastic 9

24.0

Eaton 660

27.4 (25.9) Plastic 9

26.0

Eaton 690

28.4 (26.9) Plastic 9

26.0

Eaton 690

27.4 (25.9) Plastic 9

26.0

Eaton 690

28.4 (26.9) Plastic 9

26.0

Eaton 690

27.4 (25.9) Plastic 9

26.0

Eaton 690

2001 SUPER DUTY F-650/750 11

2001 SUPER DUTY F-650/750 TECHNICAL SPECIFICATIONS Cooling Systems AIR CONDITIONING SPECIFICATIONS Make Visteon

Refrigerant R-134A

Compressor Sanden

Condensor Location Evaporator Location Air cooler mounted RH engine compartment, attached to dash in blower housing

HEATER AND DEFROSTER SPECIFICATIONS Air Intake Heater Core Blower Motor Location 4-Spd, wired to RH side under Fresh air; top of cowl ignition instrument panel; serviced through glove box

Make Visteon

Water Shutoff to Heat None

Fuel System FUEL SYSTEM DATA Injection Method (w/Electronic 5.9L ISB/7.3L/3126B) Fuel Pump Fuel Filter Air Cleaner

Direct

Electronic High-Pressure Pump

Bosch In-line P7100 External Full-Flow All

Located at Cylinder Head/Intake Manifold Single stage, Dry Element, Replaceable w/ Restriction Indicator

Steering STEERING SPECIFICATIONS Cab Style Regular Cab

Body Style Chassis

Super Cab

Crew Cab

WB (in.) 158 182 194 230 260 179 215 260 194 230 260

Type Integral Integral Integral Integral Integral Integral Integral Integral Integral Integral Integral

Power Steering Gear Ratio 20.4:1 20.4:1 20.4:1 20.4:1 20.4:1 20.4:1 20.4:1 20.4:1 20.4:1 20.4:1 20.4:1

F-650 9K Frt Axle Turning Diameter (ft.) (TAS-55) Curb-to-Curb Wall-to-Wall 46.01 49.53 50.15 53.79 53.03 56.68 61.67 65.36 68.88 72.58 49.43 53.07 57.22 61.74 68.88 72.58 53.03 56.68 61.67 65.36 68.88 72.58

F-750 12k Frt Axle Turning Diameter (ft.) (TAS-65) Curb-to-Curb Wall-to-Wall 49.87 53.18 54.78 58.19 57.94 61.37 67.45 70.90 75.38 63.90 53.99 57.39 63.49 66.93 75.38 63.90 57.94 61.37 67.45 70.90 75.38 63.90

POWER STEERING PUMP SPECIFICATIONS Engine Cummins 5.9L ISB Ford Powerstroke 7.3L CAT 7.2L 3126B

12 2001 SUPER DUTY F-650/750

Make/Model ZF-7685 ZF-7684 ZF-7685

Reservoir Capacity (max.) 1.7 liters 1.7 liters 1.7 liters

Pump Drive Direct Direct Direct

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 TECHNICAL SPECIFICATIONS Suspensions FRAME SPECIFICATIONS F-650 Maximum Side F-650 Maximum Rail Section (Height x F-750 Maximum “C” Reinforce. F-750 Maximum “C” Section WidthTop X Width Side Rail Section Section (Height x Reinforce. Section Modulus (cu. WB. Bottom Thickness) (Height x Width X Width X Thickness) (Height x Width X Thickness) (in.)(2) in.)(3)(4) Cab Style (in.) (in.)(1) Thickness) (in.)(1) (in.) (1) Regular 158 8.50 x 2.75 x 3.0 x 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 18.0 w/ Cab .280 ReinChassis 182 8.50 x 2.75 x 3.0 x .280 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 force. (F650),10.2 194 8.50 x 2.75 x 3.0 x 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 w/o rein.280 force. 230 8.50 x 2.75 x 3.0 x .280 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 24.5K F(5) 260 8.50 x 2.75 x 3.0 x 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 650) ,15 .9 w/o .280 reinSuper Cab 179 8.50 x 2.75 x 3.0 x .280 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 force. (FChassis 215 8.50 x 2.75 x 3.0 x 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 750) and .280 28.7 w/ 260 8.50 x 2.75 x 3.0 x .280 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 ReinCrew Cab 194 8.50 x 2.75 x 3.0 x .280 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 force. (F750) Chassis 230 8.50 x 2.75 x 3.0 x 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 .280 260 8.50 x 2.75 x 3.0 x .280 9.50 x 2.75 x .375 9.26 x 2.78 x .25 10.44x3.13x2.78x.25 (1) Measured to inside of metal. (2) Optional with all F-750 wheelbases except 230 in. (3) Cross-sectional modulus calculated at back of cab, to inside of metal. (4) F-750 33,000 lb. GVWR has non-reinforced 15.9 S/M and 110,000 psi frame standard. (5) 24.5K 10.2 S/M frame N/A with 260 in. wb. (HFC-0103)

Yield Strength (psi)(4) 50,000w/ F-650 and 110,000 w/F-750

SHOCK ABSORBER SPECIFICATIONS — FRONT ONLY Front Model Wheelbase (in.) Regular/Super/Crew Cab Chassis All

Usage Std.

No. Used 2

Piston Dia. (in.) 1.75

Type Double-Acting Telescopic

SHOCK ABSORBER SPECIFICATIONS — REAR ONLY Rear Model Regular/Super/Crew Cab Chassis

Wheelbase (in.) All

Usage Opt.

No. Used 2

Piston Dia. (in.) 1.75

Type Double-Acting Telescopic

SPRING SPECIFICATIONS — FRONT LEAF

Series/Model

Combined Rating @ Ground (lbs.)

Active Length (in.)

8000(1) 2 3.75 52.14 3.0 800/850 8500(2) 7 3.77 53.65 3.0 936/1120 8500(3) 7 3.77 53.65 3.0 936/1120 7 3.77 53.65 3.0 1050/1260 9000(3) 9000(4) 9 3.77 53.65 3.0 1050/1116 12000(5) 8 4.04 53.65 4.0 1080/1302 8000 lb. Taperleaf front leaf spring is standard on F-650 SuperCrewZer model (HFC-0107) Available with Std. 26,000 lb. GVWR only. Available with optional Lo-Profile Chassis only Available with 30,000 lb. GVWR only. Available with 33,000 lb. GVWR only.

Regular /Super/ Crew Cab Chassis

(1) (2) (3) (4) (5)

Total Number Thickness @ of Leaves Pad (in.)

Deflection Rate (lbs. per in./ spring) Width (unclamped/ clamped) (in.)

New or Revised — 7/25/00

Rating Each @ Pad (lbs. per spring) 3625 3825 3825 4050 4050 5400

2001 SUPER DUTY F-650/750 13

2001 SUPER DUTY F-650/750 TECHNICAL SPECIFICATIONS SPRING SPECIFICATIONS — REAR LEAF

Series/Model Regular /Super/ Crew Cab Chassis

(1) (2) (3) (4) (5)

Combined Rating @ Ground (lbs.) 19000(2) 17500(3)

No. of Leaves (Main/ Radius) N/A 9/2

Active Total Thickness Length @ Pad (in.) (in.) N/A N/A 5.35 54.25

Width (in.) N/A 3.0

19000(4) 19000(3)

9/2 9/2

5.66 5.66

3.0 3.0

54.25 54.25

Deflection Rate 1st stage (lbs. per in./ spring)(unclamped/ clamped)(1) N/A 2020&2760/ 2419&3305 2985/3600 2480&3260/ 2970&3904 3320/4190 3600/5300

21000(5) 9/2 5.90 54.25 3.0 23000 9/2 5.36 54.25 3.0 Include two-stage, variable rate springs (Engrg. direction). 19000 HAS-190 rear air suspension available with optional F-650 Super CrewZer only (HFC-0124) Available with optional Lo-Profile Chassis only (Late Availability). Available with 30,000/33,000 lb. GVWR. Available with 33,000 lb. GVWR only.

Rating Each @ Pad (lbs. per spring) TBD 7880 8550 8550 9450 10350

SPRING SPECIFICATIONS — AUXILIARY REAR LEAF

Series/Model Regular/Super/Crew Cab Chassis

Combined Rating @ Ground (lbs.) 4500

Number of Leaves (Main/ Total Thickness Radius) @ Pad (in.) 4 1.44

Active Length Width (in.) (in.) 33.5 3.0

Deflection Rate (lbs. per in./ spring) 1430

Rating Each @ Pad (lbs. per spring) 2250

Tires and Wheels TIRE SPECIFICATIONS Tread Type & Sidewall

Size 9R22.5 Goodyear G159/G124 (1)

Load Rating Rim Width (in.) 7.50

Ply Rating 12 F

Load Limits @ Maximum Maximum Inflation Inflation Pressure Pressure (lbs.) (psi) 100 4500

Prem HwyBSW 10R22.5 Goodyear G159/G124 (2) Prem Hwy7.50 12 F 100 BSW 10R22.5 Goodyear G159/G124 (1) Prem Hwy7.50 14 G 115 BSW 11R22.5 Goodyear G159/G124 (3) Prem Hwy8.25 14 G 105 BSW 245/70Rx19.5 Goodyear G159 (4) Prem Hwy6.75 14 G 100 - Frt BSW 245/70Rx19.5 Goodyear G124 (4) Prem Hwy6.75 14 G 100 - Rr BSW (1) Available with 24,500 lb. GVWR only. (2) Available with 26,000/30,000 lb. GVWR’s only. (3) Available with 33,000 lb. GVWR only. (4) Available and standard with optional Lo-Profile Chassis and SuperCrewZer only.

Static Loaded Radius (in.) 457

Revolutions Per Mile @ 45 mph 541

5150

478

518

5680

478

518

6175

493

501

4545

389

625

4375

389

625

WHEEL SPECIFICATIONS Nominal No. of Wheel Type Wheel Size Offset (in.) Studs Steel, Painted White 22.5”x7.5” (1) 6.30 10 Steel, Painted White 22.5”x8.25” (2) 6.50 10 Steel, Painted White(3) 19.5”x6.75” 5.50 8 Aluminum, Bright(4) 19.5”x6.75” 5.50 8 (1) Available with 26,000/30,000 lb. GVWR’s only. (2) Available with 33,000 lb. GVWR only. (3) Standard and available with Lo-Profile Chassis and SuperCrewZer only. (4) Standard and available with SuperCrewZer only.

14 2001 SUPER DUTY F-650/750

Bolt Circle mm (in.) 285 (11.25) 285 (11.25) 275 (10.83) 275 (10.83)

Max. Wheel Capacity Load (lbs @ ground) 6200 7390 5000 5500

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 TECHNICAL SPECIFICATIONS Transmission MANUAL TRANSMISSION SPECIFICATIONS Make/Type Torque Capacity (lbs.ft) Ratios (to 1): 1st 2nd 3rd 4th 5th 6th Reverse Lubricant Capacity (pt.) Synchronizers Gears: Material Type Bearings: Mainshaft Countershaft

Eaton FS-4205A Eaton FS-5205A Eaton FS-5306A 5-Speed Direct Wide Ratio 5-Speed Direct Wide Ratio 6-Speed Direct 420 520 520

8.05 4.35 2.45 1.48 1.00

— Helical

— — — —

Front Rear Front Rear

Mainshaft Gear Reverse Idler Gear Power Take-Off Data: Opening Gear Ratio Pitch line velocity @ 1000 engine rpm (ft./ min.) RPM @ 1000 engine RPM Diametral pitch

7.52 4.35 2.54 1.52 1.00

8.05 11.5 2nd, 3rd, 4th,5th Carburized Steel 1st, 2nd, 3rd, 4th, 5th & Reverse

9.01 5.27 3.22 2.04 1.36 1.00 6.27 8.63 12.5 19.5 2nd, 3rd, 4th,5th All Forward Gears Carburized Steel Carburized Steel Low,1st, 2nd, 3rd, 4th, 5th Low,1st, 2nd, 3rd, 4th, 5th, & Reverse 6th & Reverse

Tapered Roller Tapered Roller Tapered Roller Tapered Roller Needle Rollers Needle Rollers

Tapered Roller Tapered Roller Tapered Roller Tapered Roller Needle Rollers Needle Rollers

Tapered Roller Ball Bearing Tapered Roller Tapered Roller Needle Rollers Needle Rollers

SAE 6-Bolt, LH/RH Sides 8.05 631

SAE 6-Bolt, LH/RH Sides 7.52 LH-661/RH-374

SAE 6-Bolt, LH/RH Sides 9.01 882

459

LH-435/RH-460

522

6.1

LH-7.0/RH-6.1

6.35

MANUAL TRANSMISSION SPECIFICATIONS Make/Type Torque Capacity (lbs.ft) Ratios (to 1): 1st 2nd 3rd 4th 5th 6th 7th Reverse Lubricant Capacity (pt.) Synchronizers Gears: Material Type Bearings: Mainshaft

New or Revised — 7/25/00

— Helical

— Front — Rear

Eaton FS-6306A 6-Speed Direct 605

Spicer ES52-7B 7-Speed Direct 520

Spicer ES066-7B 7-Speed Overdrive 660

9.01 5.27 3.22 2.04 1.36 1.00

10.09 5.98 3.72 2.56 1.81 1.35 1.00 8.99 22.0 Gears 2 through 7

7.48 4.43 2.76 1.90 1.34 1.00 .74 6.66 22.0

8.63 18.0 All Forward Gears Carburized Steel 1st, 2nd, 3rd, 4th, 5th, 6th & Reverse Tapered Roller Tapered Roller

1st, 2nd, 3rd, 4th, 5th, 6th, 7th & Reverse

Tapered Roller Tapered Roller

Tapered Roller Tapered Roller

2001 SUPER DUTY F-650/750 15

2001 SUPER DUTY F-650/750 MANUAL TRANSMISSION SPECIFICATIONS Make/Type Countershaft

— Front — Rear

Mainshaft Gear Reverse Idler Gear Power Take-Off Data: Opening Gear Ratio Pitch line velocity @ 1000 engine rpm (ft./ min.) RPM @ 1000 engine RPM Diametral pitch

Eaton FS-6306A 6-Speed Direct Tapered Roller Tapered Roller Tapered Roller Tapered Roller

Spicer ES52-7B 7-Speed Direct Tapered Roller Tapered Roller Tapered Roller Tapered Roller

Spicer ES066-7B 7-Speed Overdrive Tapered Roller Tapered Roller Tapered Roller Tapered Roller

SAE 6-Bolt, LH/RH Sides 9.01 882

9.01 882

9.01 882

522

522

522

6.35

6.35

6.35

AUTOMATIC TRANSMISSION SPECIFICATIONS Make/Type Torque Capacity (lbs.-ft) Net Ratios (to 1): 1st 2nd 3rd 4th — OD (W/AT-545 Only) 5th 6th Reverse Gears Type Fluid Capacity (pts.) Oil system; Sump Filter Power Take-Off Data: Opening

Gear Ratio

Allison 2000/ Allison AT-545 4-2400 5-Spd Spd Auto. Auto.

Allison MD-3060 Allison MD-3066 Allison MD-3560 6-Spd CR 6-Spd WR 6-Spd CR Auto.(2) Auto.(1) Auto.(1)

445

520

730

730

730

3.45 2.25 1.41 1.00

3.51 1.90 1.44 1.00 .74

3.49 1.86 1.41 1.00 .75 .65 5.03

3.49 1.86 1.41 1.00 .75 .65 5.03

4.59 2.25 1.54 1.00 .75 .65 5.00

58

58

58

5.02 5.09 Constant Mesh Helical Planetary Spur 15 40 Integral In-line, full flow, replaceable Converter driven

In-line, full flow, replaceable Engine driven

SAE 6-Bolt, regular duty RH only

SAE 6-Bolt, regular duty RH/ LH

SAE “B” pad-10 SAE “B” pad-10 bolt, LH/RH Sides bolt, LH/RH Sides

3.45

3.45

3.49

Rating

200 lb. ft. cont./250 250lb.ft. cont./400 lb. ft. int. lb. ft. int. (1) Includes Dash mounted push button shifter (2) Included and standard with SuperCrewZer only (HFC-0107)

3.49

4.59

265 lb. ft. constant drive; up to 335 lb. ft. intermittent/275 lb. ft. clutch drive; up to 335 lb. ft. intermittent

CLUTCH SPECIFICATIONS Type Linkage Adj. Type Disc — Type Facing Material Lining Material Outside Diameter (approx. in.) Flywheel type Release Bearing - Race Release Bearing - Sleeve Facing Area (sq. in.) Lining Thickness (in.) Total Pressure Plate Load (lb.)— Make

16 2001 SUPER DUTY F-650/750

Spicer 1-Plate “Solo” Hydraulic Pull-Type, Self-Adj. Segmented With Coaxial Spring Damper Ceramic Woven Non-Asbstos 14.0 Flat Lube fitting Provided Lube for Life 24.0 178 2500 and 3000 (SOLO)

Spicer 2-Plate(1) “Solo” Hydraulic Pull-Type, Self-Adj. Segmented With Coaxial Spring Damper Ceramic Woven Non-Asbstos 14.0 Flat Lube fitting Provided Lube for Life 24.0 178 2000 (SOLO)

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 CLUTCH SPECIFICATIONS Spicer 2-Plate(1) 560

Type Spicer 1-Plate Max. Clutch Torque (lb/ft) 580 and 960(2) (1) Included and available with CAT 3126B 230/250 HP engines only. (2) Available with 3000 lb. Pressure Plate Load only.

TECHNICAL SPECIFICATIONS UNIVERSAL JOINT SPECIFICATIONS Transmission

U-Joint

Brakes

Engines

Cummins 5.9L ISB AT-545 1550 Air 210 HP AT-545 1550 Hydraulic 210 HP FS-5306A 1610 Air 185/205/225 HP FS-5306A 1610 Hydraulic 185/205/225 HP FS-6306A 1710 Air 225/240/245/260 HP FS-4205 Hydraulic 185 HP FS-5205A 1590 Air FS-5205A 1590 Hydraulic MD-3060 1710 Air 225/240/245/260 HP MD-3560 1710 Air 225/240/245/260 HP MD-3066(1) 1710 Hydraulic ES066-7B 1610 Hydraulic 225/240 HP ES066-7B 1710 Air 225/240/245/260 HP ES56-7B 1710 Air 205/225 HP Allison 2000 1590 Hyd/Air 225/260 HP Allison 2400 1590 Hyd/Air 225/260 HP (1) Std. and available with SuperCrewZer only

CAT 7.2L 3126B 210 HP 210 HP 190 HP 190 HP 210/230/250 HP

Ford Powerstroke 7.3L 210 HP (2400 RPM) 210 HP (2400 RPM) 210 HP (2300 RPM) 210 HP (2300 RPM)

210 HP (2300 RPM) 210 HP (2300 RPM) 210/230/250 HP 210/230/250 HP 300 HP 210 HP 210/230/250 HP 190 HP 210 HP 210 HP

210 HP (2300 RPM)

Windshield Wipers ARM AND BLADE SPECIFICATIONS Make Trico

Arm Length 21.5” LH

Blade Length 19.68”

Wiped Area 8451 sq. centimeters

TECHNICAL SPECIFICATIONS

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 17

2001 SUPER DUTY F-650/750 Option Worksheet — Super Duty F-650/750 ACCESSORY RESERVE CAPACITY REGULAR CAB MAXIMUM ALLOWABLE WEIGHT (lbs.) (Regular Production Options & Aftermarket Equipment) GVWR (lbs.) Engine/Wheelbase Power Stroke 7.3L Caterpillar 3126B Cummins 5.9L Diesel DI Turbo Diesel Diesel 158″ 182″ 194″ 230″ 260″ 158″ 182″ 194″ 230″ 260″ 158″ 182″ 194″ 230″

Super Duty Series F-650 4x2

24,500 8794 /26000 — — — — 30000 11846 — — — — 33000 — — — — —

260″

—

—

—

—

8794

—

—

—

—

8794

—

—

—

—

8628 — — — — 11680 — — — — — — — —

— 8537 — — — — 11589 — — — — — — —

— — 8335 — — — — 11387 — — — — — —

— — — 8131 — — — — 11183 — — — — —

— — — — 11846 — — — — — — — — —

8628 — — — — 11680 — — — — — — — —

— 8537 — — — — 11589 — — — — — — —

— — 8335 — — — — 11387 — — — — — —

— — — 8131 — — — — 11183 — — — — —

— — — — 11846 — — — — 10773 — — — —

8628 — — — — 11680 — — — — 10597 — — —

— 8537 — — — — 11589 — — — — 10513 — —

— — 8335 — — — — 11387 — — — — 10310 —

— — — 8131 — — — — 11183 — — — — 10089

SUPER CAB MAXIMUM ALLOWABLE WEIGHT (lbs.) (Regular Production Options & Aftermarket Equipment) Engine/Wheelbase Super Duty GVWR Series/Cab (lbs.) F-750 4x2 24,500/ 26000

30000

33000 —

Caterpillar 3126B Diesel 179″ 215″ 260″

Cummins 5.9L Diesel 179″ 215″ 260″ 8566 — —

Power Stroke 7.3L DI Turbo Diesel 179″ 215″ 260″ 8566 — —

8566

—

—

— — 11618 — — — — —

— — 11618 — — — — —

— — 11618 — — 10533 — —

8354 — — 11406 — — 10325 —

— 8057 — — 11109 — — 10015

8354 — — 11406 — — — —

— 8057 — — 11109 — — —

8354 — — 11406 — — — —

— 8057 — — 11109 — — —

Option Worksheet — Super Duty F-650/750 ACCESSORY RESERVE CAPACITY CREW CAB MAXIMUM ALLOWABLE WEIGHT (lbs.) (Regular Production Options & Aftermarket Equipment) Engine/Wheelbase Super Duty GVWR Series (lbs.) F-750 4x2 24,500/ 26000

30000

33000

Caterpillar 3126BDiesel 230″ 260″ 194″ 8445

—

—

— — 11497 — — 10421

8243 — — 11295 — — 10218 —

— 8039 — — 11091 — — 9997

—

18 2001 SUPER DUTY F-650/750

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 TOTAL ACCESSORY RESERVE CAPACITY CALCULATION Maximum Allowable Weight (RPO & Aftermarket Equipment) Less Actual Regular Production Option Content Weight (from Line A, Payload/GVWR Worksheet) Equals TOTAL ACCESSORY RESERVE CAPACITY (The maximum weight that may be added to the Ford completed vehicle must be less than this figure. This Accessory Reserve Capacity calculation approximates the figure which will be computer-printed on the Safety Compliance Certification Label located on the driver’s door latch post)

New or Revised — 7/25/00

2001 SUPER DUTY F-650/750 19

2001 SUPER DUTY F-650/750 CURB WEIGHTS Base Curb Weights(1) Series

Model - 24,500/26,000 lb. GVWR

F-650

Regular Cab Chassis

WB (in.)

Front (lbs.)

158 5385 182 5431 194 5463 230 5531 260 5599 Super Cab Chassis 179 5474 215 5543 260 5649 Crew Cab Chassis 194 5545 230 5613 260 5681 (1) Includes minimum required and standard equipment, water, oil and full tank of fuel.

Rear (lbs.)

Total (lbs.)

3321 3441 3500 3634 3770 3460 3603 3794 3510 3644 3780

8706 8872 8963 9165 9369 8934 9146 9443 9055 9257 9461

Rear (lbs.) 3617 3737 3796 3930 4066 3756 3899 4090 3806 3940 4076

Total (lbs.) 9154 9320 9411 9613 9817 9382 9594 9891 9503 9705 9909

Rear (lbs.) 3928 4066 4122 4267 4430 4085 4235 4454 4132 4277 4440

Total (lbs.) 10227 10411 10487 10690 10911 10467 10675 10985 10579 10782 11003

Base Curb Weights(1) Series F-750

Model - 30,000 lb. GVWR Regular Cab Chassis

WB (in.) Front (lbs.) 158 5537 182 5583 194 5615 230 5683 260 5751 Super Cab Chassis 179 5626 215 5695 260 5801 Crew Cab Chassis 194 5697 230 5765 260 5833 (1) Includes minimum required and standard equipment, water, oil and full tank of fuel.

Base Curb Weights(1) Series F-750

Model - 33,000 lb. GVWR Regular Cab Chassis

WB (in.) Front (lbs.) 158 6299 182 6345 194 6365 230 6423 260 6481 Super Cab Chassis 179 6382 215 6440 260 6531 Crew Cab Chassis 194 6447 230 6505 260 6563 (1) Includes minimum required and standard equipment, water, oil and full tank of fuel.

20 2001 SUPER DUTY F-650/750

New or Revised — 7/25/00