601 JL 60T JL 601 JL 501 Jl 351 and JL 351P JL 290 JL 351 PHD Normet EV 300 Hydraulic. Fransgard V-2800, V-4000, V-6500

I N D E X Farmi JL 2 / 601 JL 60T JL 601 JL 501 Jl 351 and JL 351P JL 290 JL 351 PHD Normet EV 300 Hydraulic Fransgard V-2800, V-4000, V-6500 WINCHE...
Author: Francine White
3 downloads 2 Views 4MB Size
I N D E X Farmi JL 2 / 601 JL 60T JL 601 JL 501 Jl 351 and JL 351P JL 290 JL 351 PHD Normet EV 300 Hydraulic Fransgard V-2800, V-4000, V-6500

WINCHES

Frnt Le Igland Igland 3001 Igland 3201 Igland 4001 Igland 4101 Igland 4201 Igland 4501 Igland 5001 Igland 5002 Pento TL Igland 5201 Igland 6002 Pronto TL Igland 6101 Igland 6601 Igland 9001 Grosso Igland 9002 Maxo TL Jewell Lewis Winch 400 Series Pro 800 Series Double-Drum Conversion Kit Mole & Tree Planter Dynamometer Norse Norse 290 Norse 325 Norse 390 Norse 415 Norse 425 Norse 450 Norse 490 Norse 525 Norse 615

I N D E X Norwood

WINCHES

Tajfun

IGLAND 3001 - Single-drum winch for standard farm tractor - Ideal for hauling in firewood - Characterized by basic, solid welded design - Max pulling capacity: 2.9 tons (29 kN) - Recommended tractor size: 20 - 45 kW ( 25 - 60 hp) - Cord operation and ratchet brakes are standard fittings. Designed for optional radio remote control - Equipped with cable cutters and hooks for extra choke chains This winch is not sold on the European market

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 3001

This w inch is notsold on the European m arket

Applications The sm allestIgland w inch.A basic w inch forthe "hobby forester" w ith a sm allparcelof w oodland.Idealforhauling in firew ood.A single-drum linkage-m ountw inch suitable for tractors over25 hp.

Technicalspecifications -drum em pty ............................. 29 kN (. 2 900 kg)-6 520 lbs -drum full,according to ISO 6687 ......................12.5 kN -2 810 lbs N um berofdrum s .................................................................. 1 W ire rope,calculated capacity .............................. 48 m 9 m m ,63 m 8 m m (ISO 6687) R ecom m ended cable length ....................................... 35 m 8 m m -5/16" x 115' H aul-in speed @ 540 PTO rpm (M in -M ax) ............. 0.61 -1.39 m /s (ISO 6687), 2.0 -4.56 ft/sec R eduction ratio .............................................................. 1 :5.18 M inim um PTO pow er .................................................. 19 kW (ISO 6687) C ontrols ........................................................Standard:M anual(cord) C lutch ....................................................... Friction pads,replaceable Brake ....................................................................Paw lbrake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground .............................................. 35 cm -14" H eight(standard)/W idth /D epth ............................ 115 /100 /33 cm -46 /40 /13 in. W eight(w ithoutw ire rope) ........................................ Standard:145 kg -320 lbs

M ax pulling capacity

Pulling capacity Ž AllIG LAN D w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type:6 x 26 W S + IW R C 180 kp

W e reserve the rightto m ake changes

01.06.23 M anufacturerofN orse and Igland Forestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 w w w .igland-as.com E-m ail:corporate@ igland-as.com

p

g

IGLAND 3201 - Winch model for standard farm tractors - New automatic all weather band brake fitted as standard - Pull force: 3.2 tons (32 kN) - Cable curbs prevent cable jumping off drum when winching in - Large wire rope capacity - The model is characterized by basic, solid welded design - Recommended tractor size: from 22 kW (from 30 hp) - Cord operation is standard. Designed for optional radio remote control - Equipped with cable cutters and hooks for extra choke chains - Features adjustable pto drive height to accommodate a wide range of tractors

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

g

_

Productsheet

IG LA N D 3201 Applications A basic w inch forthe "hobby forester" w ith a sm allparcelofw oodland.Idealforhauling in firew ood.A single-drum linkage-m ountw inch suitable fortractors over30 hp. Autom atic allw eatherband brake fitted as standard

Technicalspecifications -drum em pty ...................................... 32 kN (. 3.2 tons) -drum full,according to ISO 6687 .............................. 11.1 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity ............................. 78 m 9 m m ,62 m 10 m m (ISO 6687) R ecom m ended cable length ..................................................35 m 9 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ...........................0.61 -1.74 m /s (ISO 6687) R eduction ratio .............................................................. 1 :5.18 M inim um PTO pow er .................................................. 21 kW (ISO 6687) Brake pow er .................................................................. 40 kN C ontrols ........................................................Standard:M anual(cord) C lutch ....................................................... Friction pads,replaceable Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ...................................................35 cm H eight(standard)/W idth /D epth ................................... 115 cm /100 cm /35 cm W eight(w ithoutw ire rope) ............................................... Standard:154 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp This w inch m odelconform s to EU M achine D irective (C E label) W e reserve the rightto m ake changes.

01.06.23 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:corporate@ igland-as.com

p

g

IGLAND 4001 - Single-drum winch for standard farm tractor - Strong and stable, this winch has a simple design and operation making it ideal for beginners to the woods - Characterized by basic, solid welded design - Max pulling capacity: 3.9 tons (39 kN) - Recommended tractor size: 25 - 52 kW ( 35 - 70 hp) - Cord operation and ratchet brakes are standard fittings. Designed for optional radio remote control - Features adjustable pto drive height to accomodate a wide range of tractors - Equipped with cable cutters and hooks for extra choke chains This winch is not sold on the European market

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

g

_

Productsheet

IG LA N D 4001

This w inch is notsold on the European m arket

Applications R obustand stable,this is a sm allbuteffective w inch suitable forw inching in tim ber and skidding logs to the landing area.Suitable fortractors from 35 to 70 hp.Its particularly sim ple design and operation m ake this w inch idealforbeginners. W elded construction facilitates m aintenance.The rightselection ofadd-ons can m ake the IG LAN D 4001 a perfectcom pactw inch forthe professional.

Technicalspecifications -drum em pty ............................. 39 kN (. 3 900 kg)-8 770 lbs -drum full,according to ISO 6687 ......................15.3 kN -3 440 lbs N um berofdrum s .................................................................. 1 W ire rope,calculated capacity ............................. 57 m 10 m m ,95 m 8 m m (ISO 6687) R ecom m ended cable length ....................................... 50 m 10 m m -3/8" x 164' H aul-in speed @ 540 PTO rpm (M in -M ax) ..............0.61 -1.36 m /s (ISO 6687),2.0 -4.46 ft/sec R eduction ratio .............................................................. 1 :5.18 M inim um PTO pow er .................................................. 26 kW (ISO 6687) C ontrols ........................................................Standard:M anual(cord) C lutch ........................................................ friction pads,replaceable Brake ....................................................................Paw lbrake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground .................................... 42 cm -17 in.,adjustable H eight(standard)/W idth /D epth ............................ 132 /125 /42 cm -52 /50 /17 in. W eight(w ithoutw ire rope) ........................................ Standard:197 kg -445 lbs

M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp

W e reserve the rightto m ake changes.

01.06.23 M anufacturerofN orse and Igland Forestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 w w w .igland-as.com E-m ail:corporate@ igland-as.com

p

g

IGLAND 4101 - A typical all-round winch for farmers and woodland owners - Pull force: 4.1 tons (41 kN) - Hinged butt plate - Solid, simple and easy to operate, ideal for radio remote control - 3-point hitch mounted - Optional positioning of the haul-in block - Ideal for agricultural tractors, 40 - 75 hp - Automatic safety brake fitted as standard

01.06.26 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

g

_

Productsheet

IG LA N D 4101 Applications A typicalall-round w inch forfarm ers and w oodland ow ners.Solid,sim ple and easy to operate,idealforradio rem ote control.3-pointhitch m ounted.H inged butt plate.O ptionalpositioning ofthe haul-in block.Idealforagriculturaltractors,40 75 hp.Autom atic safety brake fitted as standard.

Technicalspecifications -drum em pty ................... 41 kN (. 4.1 tons) -drum full,according to ISO 6687 .............................. 15.9 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity (ISO 6687) ............................. 77 m 10 m m ,62 m 11 m R ecom m ended cable length .................................................50 m 10 m m H aul-in speed @ 540 PTO rpm (M in -M ax)(ISO 6687)standard: ...................0.61 -1.71 m /s H aul-in speed @ 540 PTO rpm (M in -M ax)(ISO 6687)w ith optionalreduction ratio .....0.39 -0.99 m /s R eduction ratio standard ........................................................ 1 :5.2 R eduction ratio option ............................................................ 1 :9 M inim um PTO pow er(ISO 6687)standard .......................................... 28 kW M inim um PTO pow er(ISO 6687)w ith optionalreduction ratio ............................ 19 kW Brake pow er .................................................................. 52 kN C ontrols ........................................................Standard:M anual(cord) C lutch ....................................................... Friction pads,replaceable Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ...................................................46 cm H eight(standard)/W idth /D epth ......................................... 190 /151 /62 cm W eight(w ithoutw ire rope) ............................................... Standard:280 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp Ž This w inch m odelconform s to EU M achine D irective (C E label) W e reserve the rightto m ake changes.

01.06.15 M anufacturerofN orse and Igland Forestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 w w w .igland-as.com e-m ail:corporate@ igland-as.com

IGLAND 4201 - Winch model for standard farm tractors - New automatic all weather band brake fitted as standard - Pull force: 4.2 tons (42 kN) - Cable curbs prevent cable jumping off drum when winching in - Large wire rope capacity - The model is characterized by basic, solid welded design - Recommended tractor size: 29-52 kW ( 40-70 hp) - Cord operation is standard. Designed for optional radio remote control - The winch is equipped with cable cutters and hooks for extra choke chains - Features adjustable pto drive height to accommodate a wide range of tractors See product sheet and list of optional equipment available for this model, or ask us for further information.

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 4201 Applications R obustand stable,this is a sm allbuteffective w inch suitable forw inching in tim ber and skidding logs to the landing area.Suitable fortractors from 40 to 70 hp.Its particularly sim ple design and operation m ake this w inch idealforbeginners. W elded construction facilitates m aintenance.The rightselection ofadd-ons can m ake the IG LAN D 4201 a perfectcom pactw inch forthe professional.Autom atic all w eatherband brake fitted as standard.

Technicalspecifications -drum em pty ...................................... 42 kN (. 4.2 tons) -drum full,according to ISO 6687 ................................ 15 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity ............................ 77 m 10 m m ,62 m 11 m m (ISO 6687) R ecom m ended cable length .................................................50 m 10 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ...........................0.67 -1.71 m /s (ISO 6687) R eduction ratio .............................................................. 1 :5.18 M inim um PTO pow er .................................................. 28 kW (ISO 6687) Brake pow er ................................................................ 52.5 kN C ontrols ........................................................Standard:M anual(cord) C lutch ........................................................ friction pads,replaceable Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ..........................................42 cm ,adjustable H eight(standard)/W idth /D epth ................................... 132 cm /125 cm /44 cm W eight(w ithoutw ire rope) ............................................... Standard:206 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp This w inch m odelconform s to EU M achine D irective (C E label)

W e reserve the rightto m ake changes.

01.06.23 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:corporate@ igland-as.com

IGLAND 4501 - A typical all-round winch for farmers and woodland owners - Solid, simple and easy to operate, ideal for radio remote control - Pull force: 4.5 tons (45 kN) - 3-point hitch mounted - Hinged butt plate - Optional positioning of the haul-in block - Ideal for agricultural tractors, 40 - 75 hp

01.06.26 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 4501

This w inch is notsold on the European m arket

Applications A typicalall-round w inch forfarm ers and w oodland ow ners.Solid,sim ple and easy to operate,idealforradio rem ote control.3-pointhitch m ounted.H inged buttplate.O ptionalpositioning ofthe haul-in block.Idealforagriculturaltractors, 40 -75 hp.

Technicalspecifications -drum em pty ISO 6687 .................... 45 kN (4 500 kg . 10 116 lbs) -drum full .................................................. 20 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity (ISO 6687) ............................. 70 m 9 m m ,57 m 10 m m R ecom m ended cable length ....................................... 50 m 10 m m -3/8" x 164' H aul-in speed @ 540 pto rpm (M in -M ax)(ISO 6687).............................0.67 -1.47 m /s R eduction ratio ............................................................... 1 :5.2 M inim um PTO pow er(ISO 6687) ................................................. 32.5 kW C ontrols ........................................................Standard:M anual(cord) C lutch ....................................................... Friction pads,replaceable Brake ............................................................. R atchet/paw lbrake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground .............................................50 cm -20 in. H eight(standard)/W idth /D epth ...................... 192 cm /151 cm /55 cm -76 /60 /22 in. W eight(w ithoutw ire rope,standard) ........................................ 260 kg -573 lbs M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp

W e reserve the rightto m ake changes 01.06.15 M anufacturerofN orse and Igland Forestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 w w w .igland-as.com E-m ail:corporate@ igland-as.com

IGLAND 5001 - Single-drum winch for standard farm tractor - Brute force and efficiency provide total control over the load under the most challenging conditions - Characterized by basic, solid welded design - Max pulling capacity: 4.9 tons (49 kN) - Recommended tractor size: 37 - 59 kW ( 50 - 80 hp) - Cord operation and ratchet brakes are standard fittings. Designed for optional radio remote control - The low profile construction of the winch keeps the rear overhang to a minimum - Features adjustable pto drive height to accomodate a wide range of tractors - Equipped with cable cutters and hooks for extra choke chains This winch is not sold on the European market

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 5001

This w inch is notsold on the European m arket

Applications This is a w inch forthose w ho require a higherstandard ofstrength,safety and efficiency. 50 to 80 hp is the recom m ended tractorrange forthis m odel,w hich is designed fora pulling capacity of4.9 tons.This w inch offers an ease ofoperation thatensures perfectcontroloverthe brute force ofyourtractorand w inch underthe m ostchallenging conditions.The low -profile construction ofthis w inch keeps rear overhang to a m inim um .

Technicalspecifications -drum em pty ........................... 49 kN (. 4 900 kg)-11 020 lbs -drum full,according to ISO 6687 ............................... 20 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity .......................................66 m 11 m m (ISO 6687) R ecom m ended cable length ...................................... 50 m 11 m m -7/16" x 164' H aul-in speed @ 540 PTO rpm (M in -M ax) ..............0.58 -1.45 m /s (ISO 6687),1.9 -4.75 ft/sec R eduction ratio ................................................................. 1 :6 M inim um PTO pow er .................................................. 31 kW (ISO 6687) C ontrols ........................................................Standard:M anual(cord) C lutch ....................................................... Friction pads,replaceable Brake ....................................................................Paw lbrake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground .................................... 52 cm -21 in.,adjustable H eight(standard)/W idth /D epth ............................ 154 /150 /43 cm -61 /60 /17 in. W eight(w ithoutw ire rope) ........................................ Standard:285 kg -630 lbs M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp

W e reserve the rightto m ake changes.

01.06.23 M anufacturerofN orse and Igland Forestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 w w w .igland-as.com E-m ail:corporate@ igland-as.com

p

g

IGLAND 5002 Pento TL - The smallest model in IGLAND's range of double-drum forestry winches - Suitable for thinning and light harvesting - High capacity in a lightweight winch - Line pull: 5 tons (50 kN) on each drum - Tractor size: 52-81 kW ( 70-110 hp) - Electrohydraulic low-pressure operation is standard (tractor dependant). Radio remote control option - Cable curbs prevent cable jumping off drum when winching in - Winch drum over run brake has external adjustment

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

g

Productsheet

IG LA N D 5002 Pento TL Applications Idealforthinning and lightharvesting.This w inch is designed foruse on a standard 70 -110 hp farm tractor.5 tons ofpullon each drum .A 2-drum w inch is easierto use than a single-drum w inch,as a lightercable w ith few ersliders m ay be used,and there are 2 cables to carry loads.

Technicalspecifications -drum em pty ....................................... 50 kN (. 5 tons) -drum full,according to ISO 6687 .............................. 26.5 kN N um berofdrum s .................................................................. 2 W ire rope,calculated capacity ........................... 118 m 11 m m ,97 m 12 m m (ISO 6687) R ecom m ended cable length ............................................. 2 X 35 m 11 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ...........................0.59 -1.12 m /s (ISO 6687) R eduction ratio ............................................................... 1 :9.7 M inim um PTO pow er(each drum ) ........................................ 37 kW (ISO 6687) Brake pow er ................................................................ 62.5 kN C ontrols ........................................................... Electrohydraulic LH Electric outfit:13-pole contact C lutch .............................................................Single friction plate Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ..........................................38 cm ,adjustable H eight(standard)/W idth /D epth ................................... 161 cm /205 cm /93 cm W eight(w ithoutw ire rope) ............................................... Standard:683 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp This w inch m odelconform s to EU M achine D irective (C E label)

W e reserve the rightto m ake changes.

00.06.23 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:corporate@ igland-as.com

p

g

IGLAND 5201 - Single-drum winch for standard farm tractor - New automatic all weather band brake fitted as standard - Pull force: 5.2 tons (52 kN) - Cable curbs prevent cable jumping off drum when winching in - Large wire rope capacity - The model is characterized by basic, solid welded design - Recommended tractor size: 40-59 kW ( 55-80 hp) - Cord operation is standard. Designed for optional radio remote control - The winch is equipped with cable cutters and hooks for extra choke chains - Features adjustable pto drive height to accommodate a wide range of tractors

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

g

Productsheet

IG LA N D 5201 Applications This is a w inch forthose w ho require a higherstandard ofstrength,safety and efficiency. 55 to 80 hp is the recom m ended tractorrange forthis m odel,w hich is designed fora pulling capacity of5.2 tons.This w inch offers an ease ofoperation thatensures perfectcontroloverthe brute force ofyourtractorand w inch under the m ostchallenging conditions.The low -profile construction ofthis w inch keeps rearoverhang to a m inim um .Autom atic allw eatherband brake fitted as standard.

Technicalspecifications -drum em pty ...................................... 52 kN (. 5.2 tons) -drum full,according to ISO 6687 ................................ 20 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity ............................ 86 m 11 m m ,71 m 12 m m (ISO 6687) R ecom m ended cable length .................................................50 m 11 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ...........................0.63 -1.66 m /s (ISO 6687) R eduction ratio ................................................................. 1 :6 M inim um PTO pow er ................................................. 35.4 kW (ISO 6687) Brake pow er .................................................................. 65 kN C ontrols ........................................................Standard:M anual(cord) C lutch ....................................................... Friction pads,replaceable Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ..........................................52 cm ,adjustable H eight(standard)/W idth /D epth ................................... 154 cm /150 cm /45 cm W eight(w ithoutw ire rope) ............................................... Standard:294 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp This w inch m odelconform s to EU M achine D irective (C E label)

W e reserve the rightto m ake changes.

01.06.23 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:corporate@ igland-as.com

IGLAND 6002 Pronto TL - A professional winch designed and dimensioned to tackle demanding forestry operations - Large drum-barrel diameter keeps pull consistent throughout long hauls - Pull: 6 tons (60 kN) on each drum - Tractor size: 52-88 kW ( 70-120 hp) - Electrohydraulic high pressure operation with self-contained hydraulics is standard. Radio remote control option - Cable curbs prevent cable jumping off drum when winching in - Winch drum over run brake has external adjustment - Switch for controlled lowering of load

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 6002 Pronto TL Applications A professionalw inch designed and dim ensioned to tackle dem anding forestry operations.Equipped w ith electrohydraulic H P rem ote controland integral hydraulics thatoperate independently oftractorhydraulics.W ith no hoses to connectand disconnect,frequentim plem entchanges are greatly facilitated and oildrips and leaks are elim inated.M oreover,im purities in one system do not contam inate the othersystem .Large drum -barreldiam eterkeeps line pull consistentthroughoutlong hauls.R ecom m ended tractorrange:70-120 hp.

Technicalspecifications -drum em pty ....................................... 60 kN (. 6 tons) -drum full,according to ISO 6687 .............................. 32.4 kN N um berofdrum s .................................................................. 2 W ire rope,calculated capacity ............................ 97 m 12 m m ,80 m 13 m m (ISO 6687) R ecom m ended cable length ............................................. 2 X 35 m 12 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ...........................0.60 -1.11 m /s (ISO 6687) R eduction ratio ............................................................... 1 :9.7 M inim um PTO pow er(each drum ) ....................................... 44.8 kW (ISO 6687) Brake pow er .................................................................. 75 kN C ontrols ........................Electrohydraulic H P rem ote control,w ith self-contained hydraulics Electric outfit:13-pole contact C lutch .............................................................Single friction plate Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ..........................................38 cm ,adjustable H eight(standard)/W idth /D epth ..................................161 cm /205 cm /92.5 cm W eight(w ithoutw ire rope) ............................................... Standard:683 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp This w inch m odelconform s to EU M achine D irective (C E label)

W e reserve the rightto m ake changes.

00.06.23 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:corporate@ igland-as.com

IGLAND 6101 - Unusually large drum capacity holds a generous length of heavy cable - 6.1 tons (61 kN) of line pull definitely put this winch in the heavy duty class - Suitable for tractors in 45-69 kW ( 60-95 hp) range - Cord operation is standard. Remote control option - High or low pulling point - Large butt plate provides excellent ground-pressure stabilizing action during winching - Cable curbs prevent cable jumping off drum when winching in - Optimum reeling characteristics

01.06.26 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 6101 Applications A heavy-duty single-drum w inch w ith 6.1 tons ofpullform oving large quantities of tim ber.U nusually large drum capacity accom m odates a generous length ofheavy cable.Sim ple design,solid construction,low centre ofgravity and a clearview from the driver's seat.The trapezoidalbutt-plate provides m axim um ground support during w inching and is idealforstacking logs.This m odelis fitted w ith high /low pulling point.Suitable fortractors in the 60 -95 hp range.

Technicalspecifications -drum em pty ...................................... 61 kN (. 6.1 tons) -drum full,according to ISO 6687 .............................. 21.2 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity (ISO 6687) ........................... 109 m 12 m m ,90 m 13 m m R ecom m ended cable length .................................................50 m 12 m m H aul-in speed @ 540 PTO rpm (M in -M ax)(ISO 6687)standard: ...................0.65 -1.82 m /s H aul-in speed @ 540 PTO rpm (M in -M ax)(ISO 6687)w ith optionalreduction ratio .....0.37 -1.06 m /s R eduction ratio standard .......................................................... 1 :6 R eduction ratio option ........................................................ 1 :10.36 M inim um PTO pow er(ISO 6687)standard .......................................... 42 kW M inim um PTO pow er(ISO 6687)w ith optionalreduction ratio ........................... 27.7 kW Brake pow er .................................................................. 75 kN C ontrols ........................................................Standard:M anual(cord) C lutch ....................................................... Friction pads,replaceable Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ...................................................57 cm H eight(standard)/W idth /D epth ......................................... 172 /180 /55 cm W eight(w ithoutw ire rope) ............................................... Standard:445 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp Ž This w inch m odelconform s to EU M achine D irective (C E label) W e reserve the rightto m ake changes.

01.06.15 M anufacturerofN orse and Igland Forestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 w w w .igland-as.com e-m ail:corporate@ igland-as.com

p

g

IGLAND 6601 - Electrohydraulic high pressure operation with self-contained hydraulics is standard - 6.6 tons (66 kN) of line pull make this suitable for tractors in the 45-74 kW ( 60-100 hp) range - High or low pulling point - High line pull throughout haul - Switch for controlled lowering of load - Heavy duty butt plate - Active ground-pressure stabilizing action during winching - High-capacity drum - Good spooling characteristics - Close placement to tractor permits heavier loads - Hinged tower makes inspection easier

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

g

Productsheet

IG LA N D 6601 Applications A large and pow erfulsingle-drum w inch w ith high orlow spooling point.Equipped w ith electrohydraulic H P rem ote controland integralhydraulics thatoperate independently oftractorhydraulics.W ith no hoses to connectand disconnect, frequentim plem entchanges are greatly facilitated and oildrips and leaks are elim inated.M oreover,im purities in one system do notcontam inate the other system .H igh-capacity drum m aintains steady strength throughoutthe pull.C lose placem entto the tractorperm its heavy loads,and its active ground-pressure stabilizing action gives ita good foothold during w inching.The tow eris hinged for easy inspection.Suitable fortractors in the 45 -74 kW (. 60 -100 hp)range.

Technicalspecifications -drum em pty ...................................... 66 kN (. 6.6 tons) -drum full,according to ISO 6687 .............................. 35.6 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity ............................ 97 m 12 m m ,80 m 13 m m (ISO 6687) R ecom m ended cable length ................................................50 m 12 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ............................0.64 -1.2 m /s (ISO 6687) R eduction ratio ................................................................. 1 :9 M inim um PTO pow er ................................................. 46.2 kW (ISO 6687) Brake pow er ................................................................ 82.5 kN C ontrols ........................Electrohydraulic H P rem ote control,w ith self-contained hydraulics C lutch .............................................................Single friction plate Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ...................................................52 cm H eight(standard)/W idth /D epth ................................... 205 cm /183 cm /67 cm W eight(w ithoutw ire rope) ............................................... Standard:495 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp AllIgland w inch m odels conform to EU M achine D irective (C E label)

00.05.29 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:

IGLAND 9001 Grosso - Heavy 9 ton (90 kN) line pull makes this suitable for tractors in the 66-103 kW ( 90-140 hp) range - Electrohydraulic high pressure operation with self-contained hydraulics is standard. Radio remote control option - Good spooling characteristics - High or low pulling point - Switch for controlled lowering of load - Butt plate provides good ground-pressure stabilizing action during winching and is ideal for piling logs - Close placement to tractor permits heavier loads - Heavy duty log guard - High-capacity drum - Easy maintenance

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 9001 G rosso Applications H igh outputunderdem anding conditions m ake this a w inch forthe professional. C lose placem entto tractorperm its heavierloads.A high-capacity drum and stable line pull(9 tons)m ake this idealfordifficultoperations.H igh orlow pulling point.G ood spooling characteristics.D esigned for90-140 hp tractors and equipped w ith electrohydraulic high pressure operation w ith self-contained hydraulics.

Technicalspecifications -drum em pty ....................................... 90 kN (. 9 tons) -drum full,according to ISO 6687 .............................. 43.4 kN N um berofdrum s .................................................................. 1 W ire rope,calculated capacity .......................................97 m 14 m m (ISO 6687) R ecom m ended cable length .................................................50 m 14 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ...........................0.59 -1.21 m /s (ISO 6687) R eduction ratio ................................................................ 1 :10 M inim um PTO pow er ................................................. 57.3 kW (ISO 6687) Brake pow er ............................................................... 112.5 kN C ontrols .................................... Electrohydraulic H P w ith self-contained hydraulics Electric outfit:13-pole contact C lutch ............................................................ D ouble friction plate Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ...................................................45 cm H eight(standard)/W idth /D epth ................................... 202 cm /205 cm /80 cm W eight(w ithoutw ire rope) ............................................... Standard:550 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp This w inch m odelconform s to EU M achine D irective (C E label)

W e reserve the rightto m ake changes.

00.06.23 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:corporate@ igland-as.com

IGLAND 9002 Maxo TL - Tractor size: 59 kW - Electrohydraulic high pressure operation with self-contained hydraulics is standard. Radio remote control option - Cable curbs prevent cable jumping off drum when winching in - Winch drum over run brake has external adjustment - Switch for controlled lowering of load

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

IG LA N D 9002 M axo TL Applications A heavy duty w inch w ith 9 tons ofline pullon each drum .Equipped w ith electrohydraulic H P rem ote controland integralhydraulics thatoperate independently oftractorhydraulics.W ith no hoses to connectand disconnect, frequentim plem entchanges are greatly facilitated and oildrips and leaks are elim inated.M oreover,im purities in one system do notcontam inate the other system .Each drum is driven by a double clutch forincreased operating reliability and reduced w ear.Suitable fortractorsizes upw ards of80 hp.

Technicalspecifications -drum em pty ....................................... 90 kN (. 9 tons) -drum full,according to ISO 6687 .............................. 44.4 kN N um berofdrum s .................................................................. 2 W ire rope,calculated capacity .......................................92 m 14 m m (ISO 6687) R ecom m ended cable length .............................................. 2 x 50 m 14 m m H aul-in speed @ 540 PTO rpm (M in -M ax) ...........................0.30 -0.61 m /s (ISO 6687) R eduction ratio .............................................................. 1 :19.5 M inim um PTO pow er(each drum ) ....................................... 33.8 kW (ISO 6687) Brake pow er ............................................................... 112.5 kN C ontrols ........................Electrohydraulic H P rem ote control,w ith self-contained hydraulics Electric outfit:13-pole contact C lutch ............................................................ D ouble friction plate Brake ...........................................Spring-loaded band,autom atic safety brake Attachm ent .......................................................... Three-pointhitch H eightofpto shaftabove ground ..........................................38 cm ,adjustable H eight(standard)/W idth /D epth ................................... 161 cm /205 cm /95 cm W eight(w ithoutw ire rope) ...............................................Standard:722 kg M ax pulling capacity

Pulling capacity Ž AllIgland w inches are designed form ounting on farm tractors w ith standard three-pointhitches Ž This w inch is fabricated ofR AEX-M ultisteel Ž R ecom m ended cable type: 6 x 26 W S + IW R C 180 kp This w inch m odelconform s to EU M achine D irective (C E label)

W e reserve the rightto m ake changes.

00.06.23 M anufacturerofForestry Equipm ent ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109, N -4885 G rim stad,N orw ay Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-m ail:corporate@ igland-as.com

290 - The smallest Norse winch - A basic winch for the «hobby forester» with a small parcel of woodland - Ideal for hauling in firewood - A single-drum linkage-mount winch suitable for tractors over 25 hp - Max pulling capacity 2.9 tons, 6 520 lbs - Designed for optional radio remote control This winch is not sold on the European market

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

290

This w inch is notsold on the European m arket

The smallest Norse winch. A basic winch for the "hobby forester" with a small parcel of woodland. Ideal for hauling in firewood. A single-drum linkage-mount winch suitable for tractors over 25 hp.

Technical specifications Max pulling capacity - drum empty . . . . . . . . . . . . . 29 kN, (. 2 900 kg), 6 520 lbs - drum full, according to ISO 6687 . . . . . 12.5 kN, 2 810 lbs Number of drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Wire rope, calculated capacity (ISO 6687) . . . . . . . . . . . . 48 m 9 mm, 63 m 8 mm Recommended cable length . . . . . . . . . . . . . . . . . . . . . . . 35 m 8 mm, 5/16" x 115' Haul-in speed @ 540 pto rpm (min-max)(ISO 6687) . . 0.61-1.39 m/s, 2.0-4.56 ft/sec Reduction ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 : 5.18 Minimum PTO power (ISO 6687) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 kW Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard: Manual (cord) Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Friction pads, replaceable Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pawl brake Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three-point hitch Height of pto shaft above ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 cm, 14 in. Height (standard) / Width / Depth . . . . . . . . . . . 115 / 100 / 33 cm - 46 / 40 / 13 in. Weight (without wire rope, standard) . . . . . . . . . . . . . . . . . . . . . . . 145 kg, 320 lbs 

All Norse winches are designed for mounting on farm tractors with standard three-point hitches

W e reserve the rightto m ake changes 01.06.23 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

325

1 of 1

http://www.igland-as.com/engelsk/c_325.htm

325 - Characterized by basic, solid welded design - A skidding winch for the «hobby forester» with a small parcel of woodland - Ideal for hauling in firewood - A single-drum linkage-mount winch suitable for tractors over 30 hp - Automatic all weather band brake fitted as standard - Max pulling capacity 3.2 tons - Designed for optional radio remote control

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

9/19/02 7:54 AM

Productsheet

325 A basic winch for the "hobby forester" with a small parcel of woodland. Ideal for hauling in firewood. A single-drum linkage-mount winch suitable for tractors over 30 hp. Automatic all weather band brake fitted as standard

Technical specifications M ax pulling capacity -drum em pty ......................... 32 kN ,(. 3.2 t) -drum full,according to ISO 6687 ..............11.1 kN N um berofdrum s ................................................. 1 W ire rope,calculated capacity (ISO 6687)........... 78 m 9 m m ,62 m 10 m m R ecom m ended cable length ................................. 35 m 9 m m H aul-in speed @ 540 pto rpm (m in-m ax)(ISO 6687) ........... 0.61 -1.74 m /s R eduction ratio .............................................. 1 :5.18 M inim um PTO pow er(ISO 6687) .................................21 kW Brake pow er ................................................. 40 kN C ontrols ......................................Standard:M anual(cord) C lutch ...................................... Friction pads,replaceable Brake ........................ Spring-loaded band,autom atic safety brake Attachm ent ......................................... Three-pointhitch H eightofpto shaftabove ground ................................. 35 cm H eight(standard)/W idth /D epth .................. 115 cm /100 cm /35 cm W eight(w ithoutw ire rope,standard) ..............................154 kg  

This Norse winch model conforms to EU Machine Directive (CE label) All Norse winches are designed for mounting on farm tractors with standard three-point hitches

W e reserve the rightto m ake changes 01.06.22 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

390 - Strong and stable, this winch has a simple design and operation making it ideal for beginners to the woods - The addition of a top pulley and remote control can make the model a perfect compact winch for the professional - For tractors 35 to 70 hp - Max pulling capacity 3.9 tons, 8 770 lbs - Norse 390 has an adjustable height input shaft (four positions) so that the model can be used on a large range of tractor sizes without working the PTO at an extreme angle - Drive chain tensioner is adjustable and spring loaded This winch is not sold on the European market

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

390

This w inch is notsold on the European m arket

Robust and stable, this is a small but effective winch suitable for winching in timber and skidding logs to the landing area. Suitable for tractors from 35 to 70 hp. Its particularly simple design and operation make this winch ideal for beginners. Welded construction facilitates maintenance. The right selection of add-ons can make the Norse 390 a perfect compact winch for the professional.

Technical specifications M ax pulling capacity -drum em pty ............. 39 kN ,(. 3 900 kg),8 770 lbs -drum full,according to ISO 6687 ..... 15.3 kN ,3 440 lbs N um berofdrum s ................................................. 1 W ire rope,calculated capacity (ISO 6687)........... 57 m 10 m m ,95 m 8 m m R ecom m ended cable length ....................... 50 m 10 m m ,3/8" x 164' H aul-in speed @ 540 pto rpm (m in-m ax)(ISO 6687) 0.61-1.36 m /s,2.0-4.46 ft/sec R eduction ratio .............................................. 1 :5.18 M inim um PTO pow er(ISO 6687) .................................26 kW C ontrols ......................................Standard:M anual(cord) C lutch ...................................... Friction pads,replaceable Brake .................................................. Paw lbrake Attachm ent ......................................... Three-pointhitch H eightofpto shaftabove ground .................. 42 cm ,17 in.,adjustable H eight(standard)/W idth /D epth ........... 132 /125 /42 cm -52 /50 /17 in. W eight(w ithoutw ire rope,standard) .......................197 kg,445 lbs 

All Norse winches are designed for mounting on farm tractors with standard three-point hitches

W e reserve the rightto m ake changes 01.06.23 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

415 - A typical all-round winch for farmers and woodland owners - Pull force: 4.1 tons (41 kN) - Hinged butt plate - Solid, simple and easy to operate, ideal for radio remote control - 3-point hitch mounted - Optional positioning of the haul-in block - Ideal for agricultural tractors, 40 - 75 hp - Automatic safety brake fitted as standard

01.06.26 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

415 A typicalall-round w inch forfarm ers and w oodland ow ners.Solid, sim ple and easy to operate,idealforradio rem ote control.3-point hitch m ounted.H inged buttplate.O ptionalpositioning ofthe haul-in block.Idealforagriculturaltractors,40 -75 hp.Autom atic safety brake fitted as standard.

Technicalspecifications -drum em pty ............................. 41 kN ,(. 4.1 t) -drum full,according to ISO 6687 ................... 15.9 kN N um berofdrum s ....................................................... 1 W ire rope,calculated capacity (ISO 6687) ................ 77 m 10 m m ,62 m 11 m m R ecom m ended cable length ..................................... 50 m 10 m m H aul-in speed @ 540 pto rpm (m in-m ax,ISO 6687)standard: .......... 0.61 -1.71 m /s H aul-in speed @ 540 pto rpm (m in-m ax,ISO 6687)w ith reduction ratio 1:9 . 0.39 -0.99 m /s R eduction ratio standard ............................................. 1 :5.2 R eduction ratio option .................................................1 :9 M inim um PTO pow er(ISO 6687)w ith standard reduction ratio ............... 28 kW M inim um PTO pow er(ISO 6687)w ith optionalreduction ratio ................ 19 kW Brake pow er ...................................................... 52 kN C ontrols ............................................ Standard:M anual(cord) C lutch ............................................ Friction pads,replaceable Brake ............................... Spring-loaded band,autom atic safety brake Attachm ent ............................................... Three-pointhitch H eightofpto shaftabove ground ....................................... 46 cm H eight(standard)/W idth ...............................190 cm /151 cm /62 cm W eight(w ithoutw ire rope)standard .................................... 280 kg

M ax pulling capacity

 

This N orse w inch m odelconform s to EU M achine D irective (C E label) AllN orse w inches are designed form ounting on farm tractors w ith standard threepointhitches

W e reserve the rightto m ake changes 01.06.15 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

425 - Robust and stable, this is a small but effective winch suitable for winching in timber and skidding logs to the landing area - Max pulling capacity 4.2 tons - Its particularly simple design and operation make this winch ideal for beginners - Suitable for tractors from 40 to 70 hp - Automatic all weather band brake fitted as standard - Features adjustable pto drive height to accommodate a wide range of tractors - Cord operation is standard. Designed for optional radio remote control

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

425 The rightselection ofadd-ons can m ake the N orse 425 a perfect com pactw inch forthe professional.Suitable fortractors from 40 to 70 hp.W elded construction facilitates m aintenance.The w inch is equipped w ith cable cutters and hooks forextra choke chains. A utom atic allw eather band brake fitted as standard

Technical specifications M ax pulling capacity -drum em pty ......................... 42 kN ,(. 4.2 t) -drum full,according to ISO 6687 ............... 15 kN N um berofdrum s ................................................. 1 W ire rope,calculated capacity (ISO 6687).......... 77 m 10 m m ,62 m 11 m m R ecom m ended cable length ................................ 50 m 10 m m H aul-in speed @ 540 pto rpm (m in-m ax)(ISO 6687) ........... 0.67 -1.71 m /s R eduction ratio .............................................. 1 :5.18 M inim um PTO pow er(ISO 6687) .................................28 kW Brake pow er ................................................52.5 kN C ontrols ......................................Standard:M anual(cord) C lutch ...................................... Friction pads,replaceable Brake ........................ Spring-loaded band,autom atic safety brake Attachm ent ......................................... Three-pointhitch H eightofpto shaftabove ground ........................ 42 cm ,adjustable H eight(standard)/W idth /D epth .................. 132 cm /125 cm /44 cm W eight(w ithoutw ire rope,standard) ..............................206 kg  

This Norse winch model conforms to EU Machine Directive (CE label) All Norse winches are designed for mounting on farm tractors with standard three-point hitches

W e reserve the rightto m ake changes 01.06.22 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

450 - A typical all-round winch for farmers and woodland owners - Solid, simple and easy to operate, ideal for radio remote control - 3-point hitch mounted - Hinged butt plate - Optional positioning of the haul-in block - Ideal for agricultural tractors, 40 - 75 hp This winch is not sold on the European market

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

450

This w inch is notsold on the European m arket

A typicalall-round w inch forfarm ers and w oodland ow ners. Solid,sim ple and easy to operate,idealforradio rem ote control.3-pointhitch m ounted.H inged buttplate.O ptional positioning ofthe haul-in block.Idealforagriculturaltractors, 40 -75 hp.

Technicalspecifications M ax pulling capacity -drum em pty ............... 45 kN ,(. 4.5 t)-10 116 lbs -drum full,according to ISO 6687 ............... 20 kN N um berofdrum s ................................................. 1 W ire rope,calculated capacity (ISO 6687)........... 70 m 9 m m ,57 m 10 m m R ecom m ended cable length ...................... 50 m 10 m m -3/8" x 164' H aul-in speed @ 540 pto rpm (m in-m ax)(ISO 6687) ............ 0.67-1.47 m /s R eduction ratio ............................................... 1 :5.2 M inim um PTO pow er(ISO 6687) ............................... 32.5 kW C ontrols ......................................Standard:M anual(cord) C lutch ...................................... Friction pads,replaceable Brake ............................................R atchet/paw lbrake Attachm ent ......................................... Three-pointhitch H eightofpto shaftabove ground ........................... 50 cm -20 in. H eight(standard)/W idth /D epth ........... 192 /151 /55 cm -76 /60 /22 in. W eight(w ithoutw ire rope,standard) ...................... 260 kg -573 lbs



AllN orse w inches are designed form ounting on farm tractors w ith standard three-pointhitches

W e reserve the rightto m ake changes 01.06.15 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

490 - Brute force and efficiency provide total control over the load under the most challenging conditions - The Norse 490 is a heavy duty design intended for the professional and the daily stress of skidding big timber - The low profile construction of the winch keeps the rear overhang to a minimum - Designed for optional radio remote control - For tractors 50 to 90 hp - Maximum pull capacity 4.9 tons, 11 020 lbs - The model has an adjustable height input shaft (four positions) so that the winch can be used on a large range of tractor sizes without working the PTO at an extreme angle - Drive chain tensioner is adjustable and spring loaded This winch is not sold on the European market

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

490

This w inch is notsold on the European m arket

This is a winch for those who require a higher standard of strength, safety and efficiency. 50 to 80 hp is the recommended tractor range for this model, which is designed for a pulling capacity of 4.9 tons. This winch offers an ease of operation that ensures perfect control over the brute force of your tractor and winch under the most challenging conditions. The low-profile construction of this winch keeps rear overhang to a minimum.

Technical specifications M ax pulling capacity -drum em pty ............ 49 kN ,(. 4 900 kg),11 020 lbs -drum full,according to ISO 6687 ....... 20 kN ,4 500 lbs N um berofdrum s ................................................. 1 W ire rope,calculated capacity (ISO 6687)......................66 m 11m m R ecom m ended cable length ...................... 50 m 11 m m ,7/16" x 164' H aul-in speed @ 540 pto rpm (m in-m ax)(ISO 6687) 0.58-1.45 m /s,1.9-4.75 ft/sec R eduction ratio ................................................ 1 :6 M inim um PTO pow er(ISO 6687) .................................31 kW C ontrols ......................................Standard:M anual(cord) C lutch ...................................... Friction pads,replaceable Brake .................................................. Paw lbrake Attachm ent ......................................... Three-pointhitch H eightofpto shaftabove ground .................. 52 cm -21 in.adjustable H eight(standard)/W idth /D epth ........... 154 /150 /43 cm -61 /60 /17 in. W eight(w ithoutw ire rope,standard) .......................285 kg,630 lbs



All Norse winches are designed for mounting on farm tractors with standard three-point hitches

W e reserve the rightto m ake changes 01.06.23 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

525 - This is a winch for those who require a higher standard of strength, safety and efficiency - 55 to 80 hp is the recommended tractor range for this model, which is designed for a pulling capacity of 5.2 tons. - This winch offers an ease of operation that ensures perfect control over the brute force of your tractor and winch under the most challenging conditions - Automatic all weather band brake fitted as standard - The low-profile construction of this winch keeps rear overhang to a minimum - Cord operation is standard. Designed for optional radio remote control

00.05.29 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

525 This is a winch for those who require a higher standard of strength, safety and efficiency. 55 to 80 hp is the recommended tractor range for this model, which is designed for a pulling capacity of 5.2 tons. This winch offers an ease of operation that ensures perfect control over the brute force of your tractor and winch under the most challenging conditions. The low-profile construction of this winch keeps rear overhang to a minimum. Automatic all weather band brake fitted as standard

Technical specifications M ax pulling capacity -drum em pty ......................... 52 kN ,(. 5.2 t) -drum full,according to ISO 6687 ............... 20 kN N um berofdrum s ................................................. 1 W ire rope,calculated capacity (ISO 6687)........... 86 m 11m m ,71 m 12 m m R ecom m ended cable length ................................ 50 m 11 m m H aul-in speed @ 540 pto rpm (m in-m ax)(ISO 6687) ........... 0.63 -1.66 m /s R eduction ratio ................................................ 1 :6 M inim um PTO pow er(ISO 6687) ............................... 35.4 kW Brake pow er ................................................. 65 kN C ontrols ......................................Standard:M anual(cord) C lutch ...................................... Friction pads,replaceable Brake ........................ Spring-loaded band,autom atic safety brake Attachm ent ......................................... Three-pointhitch H eightofpto shaftabove ground ........................ 52 cm ,adjustable H eight(standard)/W idth /D epth .................. 154 cm /150 cm /45 cm W eight(w ithoutw ire rope,standard) ..............................294 kg  

This Norse winch model conforms to EU Machine Directive (CE label) All Norse winches are designed for mounting on farm tractors with standard three-point hitches

W e reserve the rightto m ake changes 01.06.22 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

615 - Unusually large drum capacity holds a generous length of heavy cable - 6.1 tons (61 kN) of line pull definitely put this winch in the heavy duty class - Suitable for tractors in 45-69 kW ( 60-95 hp) range - Cord operation is standard. Remote control option - High or low pulling point - Large butt plate provides excellent ground-pressure stabilizing action during winching - Cable curbs prevent cable jumping off drum when winching in - Optimum reeling characteristics

01.06.26 Manufacturer of Forestry Equipment ISO-9001 Certificated Company: IGLAND AS, Roresanden 109, N-4885 Grimstad, Norway Phone +47 37 04 13 66 Fax +47 37 04 46 10 E-mail: [email protected]

Productsheet

615 A heavy-duty single-drum w inch w ith 6.1 tons ofpullform oving large quantities oftim ber.U nusually large drum capacity accom m odates a generous length ofheavy cable.Sim ple design,solid construction,low centre ofgravity and a clearview from the driver's seat.The trapezoidal butt-plate provides m axim um ground support during w inching and is idealforstacking logs.This m odelis fitted w ith high /low pulling point.Suitable fortractors in the 60 -95 hp range.Autom atic all w eatherband brake fitted as standard.

Technicalspecifications -drum em pty .......................... 61 kN ,(. 6.1 tons) -drum full,according to ISO 6687 ................... 21.2 kN N um berofdrum s ....................................................... 1 W ire rope,calculated capacity (ISO 6687) ..................109m 12m m ,90m 13m m R ecom m ended cable length ..................................... 50 m 12 m m H aul-in speed @ 540 PTO rpm (m in-m ax,ISO 6687)-standard ........ 0.65 -1.82 m /s H aul-in speed @ 540 PTO rpm (m in-m ax,ISO 6687) -w ith optionalreduction ratio ................................... 0.37 -1.06 m /s R eduction ratio standard ...............................................1 :6 R eduction ratio option ............................................. 1 :10.36 M inim um PTO pow er(ISO 6687)standard ............................... 42 kW M inim um PTO pow er(ISO 6687)w ith optionalreduction ratio ................27.7 kW Brake capacity ..................................................... 75 kN C ontrols ............................................ Standard:M anual(cord) C lutch ............................................ Friction pads,replaceable Brake ............................... Spring-loaded band,autom atic safety brake Attachm ent ............................................... Three-pointhitch H eightofpto shaftabove ground ....................................... 57 cm H eight(standard)/W idth /D epth ............................. 172 /180 /55 cm W eight(w ithoutw ire rope,standard) .................................... 445 kg M ax pulling capacity

 

This N orse w inch m odelconform s to EU M achine D irective (C E label),and to G erm an G S standard guidelines AllN orse w inches are designed form ounting on farm tractors w ith standard threepointhitches

W e reserve the rightto m ake changes 01.06.15 M anufacturerofN orse and Igland Forestry Equipm ent.ISO -9001 C ertificated C om pany: IG LAN D AS,R oresanden 109,N -4885 G rim stad,N orw ay. w w w .igland-as.com Phone +47 37 04 13 66,Fax +47 37 04 46 10,E-m ail:corporate@ igland-as.com

Return to Index Go to Î

Delimbers Feller Bunchers

SMALLWOOD II

Forwarders Grapples Harvesters Harvesting Heads Log Loaders Masticators Processing Skidders Yarders