Customer:
Date: Project:
Qty:
Type:
M100 LED Direct
Order Code: L10
L10
-
Series
-
-
-
-
-
-
-
-
-
-
-
L10 M100 LED Direct
Light Engine
CCT
1A351
725lm/8.5W per foot
30
Shielding
LW
MI
Mounting
C
S
435lm/4.9W per foot
40
RS
W3
Values calculated from a 4’ fixture @4000K using LW Shielding and DIM driver. For additional information please see page 2.
2
Available starting at 2’ and up.
3
Consult factory for lengths under 2’
4000K
LED Optimized Clear Lens with white lens Microprism
Cable
Swivel Stem
02
WH
BK
SV
Voltage
120
277
UNV
2 ft.
03
3 ft.
04
Rigid Stem
Finish
1 ft.
4 ft.
05
5 ft.
06
6 ft.
F4
Wall Mount
07
7 ft.
08
8 ft.
Surface Mount
09
9 ft.
Over 8’ supplied with 2 or more housings that are joined in the field.
4
10
11
10 ft.
11 ft.
12
12 ft.
*1’ fixture only available with 1 A35 light engine Individual fixtures, Runs and Configurations are supplied in nominal lengths to ensure full, even, illumination. See pages 2 thru 6 for additional details.
White
Black
120 Volt
277 Volt
DIM5
DM5,6
Fixture Options
DL9
Sensor Options
xE12, 13
Damp Location Rated
Enlighted
eldoLED SOLOdrive 0-10V (Linear)
FS9
In-line Fuse
xP112, 13
Philips Daylight Replace “x” with quantity
Silver
SP
XX
Runs (over 12’) & Configurations, round up to the nearest foot and replace the “xx” with the # (i.e. 13=13’ nominal)
Custom colors are available, Please consult factory
Specify Premium Color
120 thru 277 50/60hz capable
DMD5,6
DML5,6
eldoLED DALI eldoLED SOLOdrive 0-10V (Logarithmic) (Logarithmic)
SS9
Separate Switching
xP212 13 Philips Occ/Vac
C910 90 CRI
xP312, 13 Philips Occ/Vac/ Daylight
DC25,6,7
Lutron 2-Wire
DC35,6
Lutron 3-Wire
DCE5,6
Lutron Eco-System
SR5,6,8
Philips Xitanium SR (Dali)
xxxx11
LED MR16 downlight
xS112, 14
xS212, 14
Sensor Switch Sensor Switch Daylight Occ/Vac
xS312, 14
Sensor Switch Occ/Vac/ Daylight
EC15
V9016
Lit Inverted 90° Corner
5
See page 7 for full details
6
Not available for 1’ length 120V only
7 8
For use with E and P sensors only
9
See page 8 for full details and restrictions
10
For 2700K & 4000K consult factory
11
Consult factory
Minimum length 2’. See page 9 for full details and restrictions For use with SR driver only 14 For use with DIM driver only 12
13
15
Emergency Circuit Wiring
Configuration IL9016 Lit Horizontal Options 90° Corner
Compliant
1
1A201,2
35
01*
Emergency Options
ARRA
536lm/6.0W per foot
3500K
3000K
0-10V (Linear)
YEAR
1A251,2
Nominal Fixture Length
Driver
5
638lm/7.3W per foot
27
2700K
LED WARRANTY
1A301,2
IT9016
Lit “T” section
IX9016
Lit “X” section
16
See page 8 for full details and restrictions
See page 10 for full details and restrictions
ADA
Compliant
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 1 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
4”
(101mm)
3 11/16” (94mm) 3 15/16”” (100mm) LW lens shown for reference
Construction:
Electrical/Performance:
Luminaire Finish:
Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 12’) or Runs.
LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 96% at 25,000 hours and 93% at 60,000 hours per TM-21 report.
Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.
LED Life - Calculated L70 greater than 398,000 hours and Reported L70 greater than 60,000 hours @ 25°C per TM-21
All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.
Geartray - Low copper 6063-T6 extruded aluminum profile Shielding - Extruded, impact resistant acrylic lens: - LED optimized white lens (LW) - Clear lens with microprism (MI) Mounting(s) - 1/16” Aircraft Cable, Ø5/8” Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages 3 thru 6 for details). ** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If symmetrical suspensions are required please consult the factory. Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Configurations are available in approximately 1/4” increments starting at the nominal 12’ fixture length. ** Individual luminaires are not joinable in the field. Exact length luminaires - Individual luminaires, runs, and configuration are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length luminaires. L10 Joiner(s) - Runs and configurations are supplied in multiple housing that are joined together in the field using the supplied L10 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail).
Delivered Lumens - Due to LED manufacturer’s tolerances the listed output has a ±5% tolerance. For outputs based on different shielding or CCT please see photometry section at the end. CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse. CRI - Min. 80. Optional 90CRI - for 2700K & 4000K, consult factory.
Standard interior colors are White (WH), Black (BK), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
Warranty:
Sensors - Selux offers a variety of integral sensor options. For details and specifications, please refer to page 9.
5 Year Limited LED Luminaire Warranty Selux offers a 5 Year Limited Warranty to the original purchaser that the M100 series LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”
Thermal Performance:
Certifications and Compliance:
Ambient Operating Temperature - Luminaires suitable for Max. ambient temperature of 35° C (95° F) for all drivers.
NRTL - For Dry and Damp location (I.E. cULus) ADA Compliant ARRA Compliant RoHS Compliant
All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 7.
Min. ambient temperature of: -20°C (-4°F) for DIM, DM, DML, DMD, and SR drivers. 0°C (32°F) for the DC2, DC3 and DCE drivers.
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 2 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Cable Mounting (C)
Cable Mounting (C)
1. Ø 1/16” Aircraft Cable with chrome gripper for easy adjustment (48” max. from ceiling to luminaire).
Cable Mounting (C) - Dimensions Nominal Length
01 (1 ft.)
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
1' - 5/16"
313
0' - 2 1/8"
54
0' - 8 1/8"
206
0' - 1 1/8"
29
02 (2 ft.)
2' - 1/4"
616
0' - 2 1/8"
54
1' - 8"
508
0' - 1 1/8"
29
03 (3 ft.)
3' - 5/16"
923
0' - 3 1/8"
79
2' - 6 1/8"
764
0' - 2 1/8"
54
04 (4 ft.)
3' - 11 7/16"
1205
0' - 3 1/8"
79
3' - 5 3/16"
1047
0' - 2 1/8"
54
05 (5 ft.)
4' - 11 7/16"
1510
0' - 3 1/8"
79
4' - 5 3/16"
1351
0' - 2 1/8"
54
06 (6 ft.)
5' - 11 7/16"
1815
0' - 3 1/8"
79
5' - 5 3/16"
1656
0' - 2 1/8"
54
07 (7 ft.)
6' - 11 7/16"
2119
0' - 3 1/8"
79
6' - 5 3/16"
1961
0' - 2 1/8"
54
08 (8 ft.)
7' - 11 7/16"
2424
0' - 3 1/8"
79
7' - 5 3/16"
2266
0' - 2 1/8"
54
09 (9 ft.)
8' - 11 7/16"
2729
0' - 3 1/8"
79
8' - 5 3/16"
2570
0' - 2 1/8"
54
10 (10 ft.)
9' - 11 7/16"
3034
0' - 3 1/8"
79
9' - 5 3/16"
2875
0' - 2 1/8"
54
11 (11 ft.)
10' - 11 7/16"
3339
0' - 3 1/8"
79
10' - 5 3/16"
3180
0' - 2 1/8"
54
12 (12 ft.)
11' - 11 7/16"
3643
0' - 3 1/8"
79
11' - 5 3/16"
3485
0' - 2 1/8"
54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
L10 Cable (C) Suspension Detail
L10 Cable (C) Suspension Detail
(Feed location(s) only)
(Non-Feed location(s) only)
Outlet box for feed only (by others) Cross bar with 1/4-20 rod and ground screw 2x Outlet box screws (by others) 1/4” x 5” diameter canopy (white) Cord strain relief bushing
1/4”- 20 Threaded Rod (supplied & installed in the field by others) 1/4” x 2” diameter Canopy (white) 1/4-20 Slip ring coupler 1/16” Aircraft cable
1/4-20 Slip ring coupler
Chrome gripper
Feed cord (white)
Luminaire
1/16” Aircraft cable 2x White cable stay Chrome gripper Luminaire
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 3 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Stem Mounting (S & RS)
Stem Mounting (S & RS)
1. Ø 5/8” Swivel Stem provides 30° swivel and can be cut in field (48” max. from ceiling to luminaire). 2. Ø 5/8” Rigid Stem is fixed and is not able to be cut/adjusted in field (48” max. from ceiling to luminaire).
Swivel (S) & Rigid Stem (RS) Mountings - Dimensions Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
01 (1 ft.)
1' - 5/16"
313
0' - 2 1/8"
54
0' - 8 1/8"
206
0' - 2 1/8"
54
02 (2 ft.)
2' - 1/4"
616
0' - 2 1/8"
54
1' - 8"
508
0' - 2 1/8"
54
03 (3 ft.)
3' - 5/16"
923
0' - 3 1/8"
79
2' - 6 1/8"
764
0' - 3 1/8"
79
04 (4 ft.)
3' - 11 7/16"
1205
0' - 3 1/8"
79
3' - 5 3/16"
1047
0' - 3 1/8"
79
05 (5 ft.)
4' - 11 7/16"
1510
0' - 3 1/8"
79
4' - 5 3/16"
1351
0' - 3 1/8"
79
06 (6 ft.)
5' - 11 7/16"
1815
0' - 3 1/8"
79
5' - 5 3/16"
1656
0' - 3 1/8"
79
07 (7 ft.)
6' - 11 7/16"
2119
0' - 3 1/8"
79
6' - 5 3/16"
1961
0' - 3 1/8"
79
08 (8 ft.)
7' - 11 7/16"
2424
0' - 3 1/8"
79
7' - 5 3/16"
2266
0' - 3 1/8"
79
09 (9 ft.)
8' - 11 7/16"
2729
0' - 3 1/8"
79
8' - 5 3/16"
2570
0' - 3 1/8"
79
10 (10 ft.)
9' - 11 7/16"
3034
0' - 3 1/8"
79
9' - 5 3/16"
2875
0' - 3 1/8"
79
11 (11 ft.)
10' - 11 7/16"
3339
0' - 3 1/8"
79
10' - 5 3/16"
3180
0' - 3 1/8"
79
12 (12 ft.)
11' - 11 7/16"
3643
0' - 3 1/8"
79
11' - 5 3/16"
3485
0' - 3 1/8"
79
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
L10 Swivel Stem (S) Suspension Detail
L10 Rigid Stem (RS) Suspension Detail
(feed wires through stem supplied by Selux)
(feed wires through stem supplied by Selux) 3/8 IP nipple (supplied & installed by others)
Outlet box (supplied & installed by others) 3/8”IP Cross bar with ground screws
Outlet box (supplied & installed by others) Square nut
Pin Hemispherical assembly 1 7/16” x 5” diameter canopy (white)
Suspension hickey Square nut 1/4” x 5” diameter canopy (white)
3/8” IP steel stem (white)
Canopy securing screw
Dress nut
3/8” IP steel stem (white)
Luminaire Square nut
Dress nut Luminaire Square nut
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 4 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Wall Mounting (W)
Wall (W) Mount - Dimensions Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
01 (1 ft.)
1' - 5/16"
313
0' - 6 3/16"
157
NA
02 (2 ft.)
2' - 1/4"
616
0' - 3 1/8"
79
1' - 6 1/16"
“D” Feed Location
MM
Feet/Inch
MM
0' - 6 3/16"
157
458
0' - 3 1/8"
79
03 (3 ft.)
3' - 5/16"
923
0' - 6 1/8"
156
2' - 1/8"
612
0' - 6 1/8"
156
04 (4 ft.)
3' - 11 7/16"
1205
0' - 6 1/8"
156
2' - 11 3/16"
894
0' - 6 1/8"
156
05 (5 ft.)
4' - 11 7/16"
1510
0' - 6 1/8"
156
3' - 11 3/16"
1199
0' - 6 1/8"
156
06 (6 ft.)
5' - 11 7/16"
1815
0' - 6 1/8"
156
4' - 11 3/16"
1504
0' - 6 1/8"
156
07 (7 ft.)
6' - 11 7/16"
2119
0' - 6 1/8"
156
5' - 11 3/16"
1808
0' - 6 1/8"
156
08 (8 ft.)
7' - 11 7/16"
2424
0' - 6 1/8"
156
6' - 11 3/16"
2113
0' - 6 1/8"
156
09 (9 ft.)
8' - 11 7/16"
2729
0' - 6 1/8"
156
7' - 11 3/16"
2418
0' - 6 1/8"
156
10 (10 ft.)
9' - 11 7/16"
3034
0' - 6 1/8"
156
8' - 11 3/16"
2723
0' - 6 1/8"
156
11 (11 ft.)
10' - 11 7/16"
3339
0' - 6 1/8"
156
9' - 11 3/16"
3028
0' - 6 1/8"
156
12 (12 ft.)
11' - 11 7/16"
3643
0' - 6 1/8"
156
10' - 11 3/16"
3332
0' - 6 1/8"
156
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Wall Mount (W) (Covers a 4x4 or 2x4 J-Box)
1. Aluminum wall bracket (by Selux) 2. 4”x4” or 2”x4” J-Box at feed location (supplied and installed by others). 3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to anchor the wall bracket. Mounting hardware supplied and installed to code by others.
4”
(102mm)
4”
(102mm)
1”
(25mm)
4 15/16”
(126mm)
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 5 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Surface Mounting (F) - 1’ to 8’
Surface Mounting (F) - Over 9’ to 12’
Surface Mount (F) - Dimensions Nominal Length
01 (1 ft.)
“A” Housing Length
* “B” (Ref.) End Suspensions
* “B1” End Suspensions
Feet/Inch
MM
Feet/Inch
MM
1' - 5/16"
313
0' - 1 5/8"
41
Feet/Inch N/A
MM
“C” Mid. Suspension
“C1” Mid. Suspension Feet/Inch
MM
“C2” Mid. Suspension Feet/Inch
MM
“D” Feed Location
Feet/Inch
MM
Feet/Inch
MM
0' - 9 1/8"
231
N/A
N/A
0' - 4 1/8"
105
02 (2 ft.)
2' - 1/4"
616
0' - 1 5/8"
41
N/A
1' - 9"
534
N/A
N/A
0' - 4 1/8"
105
03 (3 ft.)
3' - 5/16"
923
0' - 6 1/8"
156
N/A
2' - 1/8"
612
N/A
N/A
0' - 2 1/8"
54
04 (4 ft.)
3' - 11 7/16"
1205
0' - 6 1/8"
156
N/A
2' - 11 3/16"
894
N/A
N/A
0' - 2 1/8"
54
05 (5 ft.)
4' - 11 7/16"
1510
0' - 6 1/8"
156
N/A
3' - 11 3/16"
1199
N/A
N/A
0' - 2 1/8"
54
06 (6 ft.)
5' - 11 7/16"
1815
0' - 6 1/8"
156
N/A
3'
914
1' - 11 3/16"
590
N/A
0' - 2 1/8"
54
07 (7 ft.)
6' - 11 7/16"
2119
0' - 6 1/8"
156
N/A
3'
914
2' - 11 3/16"
894
N/A
0' - 2 1/8"
54
08 (8 ft.)
7' - 11 7/16"
2424
0' - 6 1/8"
156
N/A
3'
914
3' - 11 3/16"
1199
N/A
0' - 2 1/8"
54
09 (9 ft.)
8' - 11 7/16"
2729
0' - 6 1/8"
156
0' - 6"
153
3' - 11 3/16"
1199
10 (10 ft.)
9' - 11 7/16"
3034
0' - 6 1/8"
156
0' - 6"
153
3'
914
1' - 11 3/16"
11 (11 ft.)
10' - 11 7/16"
3338
0' - 6 1/8"
156
0' - 6"
153
3'
914
2' - 11 3/16"
12 (12 ft.)
11' - 11 7/16"
3643
0' - 6 1/8"
156
0' - 6"
153
3'
914
3' - 11 3/16"
NA
3'
914
0' - 2 1/8"
54
590
3'
914
0' - 2 1/8"
54
894
3'
914
0' - 2 1/8"
54
1199
3'
914
0' - 2 1/8"
54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Surface Mount (F)
1. Ø 5/16” Mounting hole drilled at the factory (mounting hardware to code by others).
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 6 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Drivers: 0-10V linear dimming (DIM) Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. (Due to size constraints, 1’ luminaires are supplied with a driver from a different manufacturer than 2’ and above luminaires. For details, please consult factory.)
LUTRON 2-wire dimming (DC2) Luminaires supplied with A-series 2-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%. LUTRON 3-wire dimming (DC3) Luminaires supplied with A-series 3-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
eldoLED SOLOdrive 0-10V linear dimming (DM) Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
LUTRON Ecosystem dimming (DCE) Luminaires supplied with A-series EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
eldoLED SOLOdrive 0-10V logarithmic dimming (DML) Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
* For control recommendations and system layout for Lutron drivers, please contact Lutron.
eldoLED SOLOdrive DALI dimming (DMD) Luminaires supplied with SOLOdrive DALI dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
Philips Xitanium Sensor Ready DALI dimming (SR) Luminaires supplied with Xitanium SR dimming driver programmed for Constant Current Reduction (CCR). Minimum dim level down to 5%. For use with E and P sensors only.
* For control recommendations for eldoLED drivers, please consult eldoLED.
Driver Quantity DIM, DM, DML & DMD drivers, and SR drivers DC2, DC3, & DCE drivers
1 ft.
2 ft.
3 ft.
4 ft.
5 ft.
6 ft.
7 ft.
8 ft.
9 ft.
10 ft.
11 ft.
12 ft.
RUN
1
1
1
1
1
1
2
2
2
2
3
3
Approximately 1 driver per 4 ft.
N/A
1
1
1
2
2
2
2
3
3
3
3
Consult Factory
* For inrush and control current, please refer to driver manufacturers’ spec sheets.
Wiring Diagrams
0-10V linear (DIM) 0-10V linear eldoLED SOLOdrive (DM) 0-10V logarithmic eldoLED SOLOdrive (DML) DALI eldoLED SOLOdrive (DMD) Philips SR DALI (SR)
Sensor Wiring Diagrams
standard
DIM, DM, DML, DMD & SR
DALI DALI
ENLIGHTED OR PHILIPS SENSOR SR (+) SR (-)
PHILIPS XR
SENSOR SWITCH
ELDO 0-10V (+) (-)
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
0-10V
AUX (+) AUX (-)
Page 7 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse).
Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing.
Separate Switching (SS) - Luminaires available with separately switched 4’ (nominal) sections starting at 7’ and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use). - To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order. * If the project requires different separate switching than outlined above please consult the factory. *For Separate Switching with sensors, please consult factory.
*For Damp Location with sensors, please consult factory.
Emergency Circuit (EC) - Luminaires with EC option compliant to UL 924 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use. - For 1’ to 6’ nominal luminaires, the entire fixture is wired for operation on emergency circuit. - For 7’ and up nominal luminaires, the first 4’ nominal length is wired for operation by a separate EM circuit by default to meet the required “Life Safety Code” (NFPA 101). *If a different configuration is needed please consult the factory. *For EC with sensors, please consult factory.
Joiner System - standard for Runs and Configurations
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 8 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Sensor Ordering Chart Quantity x Number of Sensors
Sensor
Settings*
E Enlighted FS-D22
1 Daylight
P Philips Easy Sense SNS102
2 Occupancy/Vacancy
S Sensor Switch MSD EZ
3 Daylight/Occupancy/Vacancy * Settings not available with Enlighted
Enlighted FS-D22 (E) Occupancy/vacancy, daylight harvesting, plus the Internet of Things (IoT) data collection and reporting. For full details, please see FS-D22 spec sheet on the Enlighted website. Must be paired with Philips Xitanium SR driver (SR driver selection). Commissioning by Enlighted. Please contact Enlighted for complete details prior to specifying. Philips EasySense SNS102 (P) Occupancy/vacancy and daylight harvesting. Sensor can be programmed on-site via NFC or IR using Android app only, by others. For full details, please see the SNS102 spec sheet on the Philips website. Must be paired with Philips Xitanium SR driver (SR driver selection). Wall dimming via wireless wall switch from Philips/Illumra (www.illumra.com/easysense). Please contact Philips for complete details prior to specifying. Sensor Switch MSD EZ (S) Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with eldoLED 0-10V driver (DIM driver selection). Manual control of dimming not available with MSD EZ sensor. Please contact Sensor Switch for complete details prior to specifying. Occupancy Enlighted FS-D22 (E)
Vacancy
Daylight Harvesting
See Enlighted’s website for full capabilities
Driver Compatibility SR
Philips EasySense SNS102 (P)
√
√
√
SR
Sensor Switch MSD EZ (S)
√
√
√
DIM
Factory Presets - Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers’ spec sheets for details on presets and re-programming. Commissioning - Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors.
Sensor Placement - for other placement options, please consult factory.
Qty 1 Sensor - Beginning
Qty 2 Sensor - Beginning and End
Fixture Length Lit Section*
3”
(76mm)
Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer
3 15/16””
(100mm)
Lens Beginning of Run Exact sensor placement will be defined by approved factory drawing.
Sensor Plate
*Lit section will be the fixture length minus 3” for sensor plate.
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 9 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct
Standard Direct shapes/configurations: Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory. The minimum standard lengths for “L” shapes: - IL90 or V90 open shapes is 4’ x 4’ nominal (example: leg, 90, leg) - IL90 or V90 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90) (E xception is that the IL90 & V90’s can be joined directly to provide a 4’ x 4’ nominal shape)
The minimum standard lengths for “T” & “X” shapes: - IT90 = 4’ nominal on the short leg and 8’ nominal on the long side - IX90 = 8’ nominal for either direction
*For sensors in configurations, please consult factory.
Project Specific Direct shapes/configurations: Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements. Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.
Direct Lit Corner and Section - Dimensions IL90
V90
Feet/Inch
MM
“A” Housing (Outside)
2' - 2 1/16"
662
“A1” Housing (Inside)
1' - 10 1/8"
562
IT90
Feet/Inch
MM
“B” Housing (Outside)
2' - 3 1/2"
698
“B1” Housing (Inside)
1' - 11 1/2"
597
IX90
Feet/Inch
MM
Feet/Inch
MM
“C” Housing
2' - 2 1/16"
662
* “C1” Ref.
2' - 1/8"
612
“D” Housing
4' - 3/16"
1224
“E” Housing
* “D1” Ref.
2' - 1/8"
612 4' - 3/16"
1224
* “E1” Ref.
2' - 1/8"
612
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 10 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct Photometry LW Optics / 34W LED / 4000K CCT
1029
Link to photometry (IES & PDF files)
772
515
257
Catalog #: L10-1A35-40-LW-04-120 Report #: 747916 Delievered Lumens: 2900 Input Watts: 34W Efficacy: 85 Power Factor: 0.994 Total Harmonic Distortion: 5.07 CCT: 3950K CRI: 83.9 Max Candela: 1029 @ 2.5° from Vertical Spacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.26 Spacing Criterion (Diagonal): 1.38
MI Optics / 34W LED / 4000K CCT
1
2
Maximum Candela = 1029.4 Located At Horizontal Angle = 0, Vertical Angle = 2.5 # 1 - Vertical Plane Through Horizontal Angles (90 - 270) # 2 - Vertical Plane Through Horizontal Angles (0 - 180)
1657
Link to photometry (IES & PDF files) 1243
829
414
Catalog #: L10-1A35-40-MI-04-120 Report #: 89781-A3540 Delivered Lumens: 2699 Input Watts: 32.8W Efficacy: 85 Power Factor: 0.994 Total Harmonic Distortion: 5.07 CCT: 3950K CRI: 83.9 Max Candela: 1657 @ 15° from Vertical Spacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.98 Spacing Criterion (Diagonal): 1.10
1
2
Maximum Candela = 1657.192 Located At Horizontal Angle = 90, Vertical Angle = 15 # 1 - Vertical Plane Through Horizontal Angles (90 - 270) # 2 - Vertical Plane Through Horizontal Angles (0 - 180)
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 11 of 12 (Rev. 10/2016) M100LED Direct_v2.3
M100 LED Direct Photometry CCT Multiplier 4000K
1.000
3500K
0.936
3000K
0.945
2700K
0.923
90 CRI Multiplier 4000K
0.884
3500K
0.924
3000K
0.880
CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page one (light engine).
Light Engine Multiplier Engine
Lumens
1A35
1.00
Watts 1.00
1A30
0.88
0.86
1A25
0.74
0.71
1A20
0.60
0.58
Light engine multiplier supplied for per foot values listed on page one (light engine).
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 12 of 12 (Rev. 10/2016) M100LED Direct_v2.3