◆
VTW43M
4.3 Inch Car Rear View Mirror Monitor with Built-In Miracast
VTW43M
User's Manual
Table of Contents Chapter 1: Product IntrucƟon
Welcome to use our 4.3 inch car rear view mirror monitor with Built-In Miracast ● We reserve the final explana on right on this User's Manual. ● Specifica ons are subjected to change without no ce. Sorry for any inconvenience
1.1 1.2 1.3 1.4
3 3 3 4 4
Package Features Specifica ons Front bu ons opera on
Chapter 2: InstallaƟon and Wiring
caused! ● Please make a copy of important data. We assume no responsibility for the data loss. ● This manual has been carefully revised. Please contact our service center when any
2.1 2.2 2.3 2.4
7 7 8 8 9
How to install Mirror Special bracket How to install reverse camera How to wire
type mistake is found. ● Please read the opera ng instruc on carefully and use the accessories only provided by the original factory to avoid any unexpected damage. No warranty will be executed if you are not following the instruc on or connec ng with the incompa ble accesso-
Chapter 3: Basic FuncƟons 3.1 3.2 3.3 3.4
11 11 11 12 12
High reflec ve mirror Glass and bracket Back up camera display Automa c brightness adjustment
ries. We assume no responsibility for any loss and damage caused hereby. ● Any discrepancy between the pictures and real products hereina er, the real one prevails.
Chapter 4: Menu Seƫng 4.1 4.2
13 13 13
Remote control Menu se ng guidance
Chapter 5: Adjustable Guide Line 5.1 5.2 5.3
14 14 14 15
About guide line What the regular guide line is How to adjust the guide line
Chapter 6: Miracast 6.1 6.2
16 16 19
How to connect Channel switching
Chapter 7: Firmware Update
1
21
2
Chapter 1: Product IntroducƟon
1.4 Front buƩons operaƟon
1.1 Package The packing box contains the following accessories. Please confirm: ● 4.3 inch car rear view mirror monitor with built-in Miracast ● Wire harness ● User's manual ● Wire cover ● Remote control
5 6 7 8
Please check your package box for the items listed above. Please contact the distributor or the agent as soon as possible if there is any damage. 1
1.2 Features
2
3
4
● 4.3 inch wide LCD display screen ● 2-way video inputs ● Back-up camera display
1
4.3 inch ultra high brightness display screen
● Automa c brightness adjustment
2
Front light sensor
3
Turn on/off the display screen
4
Indicator
● 4.0 mm glass and φ 21 mm car factory OEM bracket ● Adjustable guide line
1.3 SpecificaƟons 5
● Screen size: 4.3 inch ● Display screen: TFT-LCD ● Aspect resolu on: 480(H)*272(V)
Built-in miracast switch mode Press”M” bu on to switch back and forth between Android mode and iOS mode.
Switch display mode 6
Press “CH” shortly can switch display mode: miracast, Video, camera.
7
Volume up
8
Volume down
● Working voltage: 12V ● Working temperature: -20℃~+65℃ ● Signal system: PAL/Auto/NSTC
3
4
9
Special bracket
10
Connector
11
Speaker
12
Black to GND
13
Red to ACC +12V
14
Back up signal
15
Right audio
16
Le audio
17
Back up camera input
18
Video input
11
10 9
14 13 15
12
16 17 18
5
6
Chapter 2: InstallaƟon and Wiring
2.2 Special bracket
2.1 How to install mirror 2.1.1 Remove the original mirror
1
1
2 Many kinds of brackets are available. Please find the one that suits your vehicle. Please contact us if you could not find the bracket of your car here.
Original rear view mirror
Adapter on the windshield
Different cars have different brackets. It depends on your vehicle maker and manufacturer. There are many methods to remove the original rear view mirror. However, please don’t force the mirror off the bracket. The manufacturer will not be responsible for any damage caused to your car by inappropriate installa on of the mirror.
2.3 How to install reverse camera When a camera is to be installed at the rear of vehicle, a good posi on is usually at the top of the License plate where under ledge.
Rear view mirror monitor Camera
2.1.2 Install mirror monitor on the base Install rear view mirror along this direc on.
Install rear view mirror along this direc on.
License plate
1BAM BAM 2X 2XX General installation location
contrarotate the fixed rear view mirror
7
8
2.4 How to wire The reversing signal is input to rear view mirror by connec ng the green line. Therefore, reversing video can be displayed automa cally on the wide 4.3 inch LCD monitor.
The advisable installa on posi on for camera Black to GND Red to ACC +12V
Back up camera
Back car singal PUSE BOX
Red to ACC +12V
Le video
vide
green
Left
3M powerharness
o
Black to GND Red to ACC +12V
Black to GND Le audio Right audio
Back up video
9
10
Chapter 3: Basic FuncƟons
3.3 Back up camera display When the car is in reverse, the monitor will automa cally display backup camera.
3.1 High reflecƟve mirror Clear back up view displayed on high reflec ve mirror.
A perfect reflec ve mirror
High reflec ve mirror
Normal reflec ve mirror
Automa cally display
9
3.4 AutomaƟc brightness adjustment
3.2 Glass and bracket The thickness of our mirror’s glass is 4mm. It is strong enough to bear impact and reach every country’s safety standards on rear view mirror. OEM bracket for special rear view mirror monitor with 21mm-thickness pipe.
4.0mm
When ambient light is weak,the screen will automa cally reduce the brightness and get clear for watching.
When ambient light is strong, the screen will automa cally increase the brightness and get clear for watching
φ=21mm
11
12
Chapter 4: Menu Seƫng
Chapter 5: Adjustable Guide Line
4.1 Remote control
5.1 About guide line
The menu only can be set by remote control, and kindly check its defini on as below.
There are three lines---red, yellow, and green, to help drivers es mate the distance from obstacles. Those three lines are displayed on the monitor when the car is reversing. The green line is 10 feet away from the back of the car, and the yellow line is 6.5 feet away. The distant red line is 3.3 feet away from the back of the car, while the closed red line is 1.3 feet away. Please note that there is 0.65 feet distance from the car for reference lines shown below.
Menu parameter increases
Enterpicturemenu Menu parameter decreases Guide line up Guide line le
Guide line right
Enter guide line adjustment
Guide line down
Guide line clockwise Guide line an -clockwise Press to reset all menu and parameters
4.2 Menu seƫng guidance Short press “ ”, you switch among “PICTURE”, “SYSTEM”, or enter out. When you enter “PICTURE”, press “ ” to switch among the items. “ ” and “ to change the figure of each se ng. “SYSTEM” se ng is the same as explains above.
13
5.2 What the regular guide line is ”are
Regular guide lines are fixed although installa on sites of camera and car size are different. The fixed guide line is not accurate enough for drivers. There is huge difference between the regular, fixed guide lines, and real guide lines of the car. It may cause accidents when camera is mounted on the le or right side on the back side of the car.
14
5.3 How to adjust the guide line According to the site of standard reference line, we can put reference objects such as desks in the back side of the car. Compared with the marked reference objects, we can adjust the sites and angles of two guide lines are displayed on the monitor. You will get the accurate and safety guide lines once it coincides with the reference objects. Press se ng bu on to enter “guide line adjustment” mode. The system is defaulted to adjust le guide line first. Press the bu on again to switch to adjust the right guide line. The up , down , le and right bu ons are to adjust the corresponding loca on of guide lines. The clockwise rota on and contra rota ng bu ons are to adjust the angles of guide lines. It is easy to operate and calibrate. A er finishing calibra on, switch the reverse gear to save the informa on. Note: keep the remote control 05.m-1.0m away from rear view mirror when you use the remote to adjust the parking lines. Right posiƟon
L
Wrong posiƟon
Chapter 6: Miracast This is a special device to project your mobile phone to rear view mirror monitor through Wi-Fi connec on, and the popular standards like DLNA,Miracast and Air Play. The driver can set the naviga on path on the phone before entering the car. The naviga on audio and video can be displayed simultaneously on the rear view mirror as long as the Wi-Fi is connected to the rear view mirror. While driving you can also set naviga on path by a passenger using a mobile phone, the image is displayed simultaneously on the rear view mirror. Please note: Make sure to turn of the bluetooth when you use mirrorlink func on and connect your phone！
6.1 How to connect 6.1.1 How to connect with Android phone (Android version has more funcƟons on how to use wireless projecƟon. Please see your phone instrucƟons for reference. ) 1: Make sure android phone has wireless projec on func on ( part of the phone can not support wireless projec on, or part of the phone wireless display needs to root and could use a er changing the system file).
R
2: Click the “M” bu on on the TP bu on, switch wireless mode to Android mode; open the Wi-Fi on your phone, then search equipment in the phone's wireless projec on func on, connect the device according to the wireless device names that are displayed on the screen. Please see the steps as below,
Display on the monitor
“M”bu on
Press the buƩon to choose L or R adjustable guide line.
Up
Clockwise
Le Right Down
Remote control
Move the guide line
15
An -clockwise Rotate the guide line
16
6.1.2 How to connect with iPhone 1: Click the “M” bu on on TP bu on, switch the wireless mode to iOS mode. “M”bu on
tap here tap here tap here
A er finishing the connec on, then the phone screen is projected to the rear view mirror. 2: Using iPhone search Wi-Fi (Wi-Fi name is displayed on the screen and shown as below), then enter the default password: 12345678. A er finishing WIFI connec on, bring up the shortcut menu, click on the AirPlay func on, select the device name, and open the mirroring.
Tap here Wi-Fi name Turn it on
Tap here
17
18
A er finishing the connec on, then the phone screen will be projected onto the rear view mirror.
6.2.2 VIDEO display
6.2.3 MOBILE display
6.2 Channel switching Press the “CH” bu on on the screen, display can be switched among CAMERA, VIDEO, MOBILE.
6.2.1 CAMERA display
19
20
Chapter 7: Firmware Update 1. click the “M” bu on on TP bu on, switch the wireless mode to iOS mode. 2. 1) using mobile/laptop/table search Wi-Fi (Wi-Fi name is displayed on the screen), then enter the default password: 12345678. 2) Upon the connec on between mobile/laptop/table and dongle is completed, open web browser on the mobile phone/laptop/tablet and visit h p:\\192.168.49.1. 3) Tap the icon to make the web browser jump to another page.
4. Dongle is able to access Internet through AP. AP's SSID and dongle's IP address that are dispatched from AP (“Device IP1”) will be shown on the screen. The mobile phone/laptop/tablet that is connected to dongle allows to access the Internet because of AP bridge func on of dongle. Then long press “M” bu on to upgrade within 30 seconds.
Wi-Fi name
3. Tap “Scan” and follow the instruc ons to connect to Wi-Fi AP which allows to access Internet through WAN. Please note that when the connec on between dongle and AP is established, the connec on between dongle and mobile phone/laptop/table may be disconnected. The reason is that the connec on channel between dongle and mobile phone is different from the channel between dongle and AP. In this case, mobile phone /laptop/tablet should be connected to dongle by using so AP again.
5. A er upgrade is completed, restart the mirror.
“If new iOS releases, VTW43M may require new firmware update for Miracast func on. Availability of New firmware update may take awhile a er Apple's released new iOS.”
21
22
