3M™ Power Tool System Range Brochure
Power.
Performance.
Perfection.
www.3M.co.uk
Introduction 3M™ Power Tool System Product Catalogue
Power.
Performance.
Perfection. Power
Performance
Perfection
Engineered to deliver an impressive power to weight ratio, the new range of 3M Power Tools offer outstanding results.
To achieve the best possible result simply combine the superior properties of 3M Abrasives and Accessories with the high performance and durability of a 3M Power Tool.
Once you get your hands on the 3M Power Tool Abrasive System you’ll feel the difference straight away. Every component has been engineered to work in perfect harmony to give you a better result on virtually any surface.
3M™ Power Tool System Product Catalogue
3
Contents Contents Introduction 3M™ Customer Service.................................................................................... .............page 2 3M After Sales Care......................................................................................... .............page 3
3M Air-Powered Random Orbital Sanders 3M Self-Generated Vacuum Random Orbital Sanders.................................................. page 4 3M Central Vacuum Random Orbital Sanders.............................................................. page 5 3M Two-Hand Random Orbital Sander......................................................................... page 5 3M™ Hookit™ Discs...................................................................................................... page 6 Random Orbital Sander Accessories........................................................................... page 10
3M Air-Powered Orbital Sanders 3M Self-Generated Vacuum Orbital Sander................................................................ .. page 8 3M Central Vacuum Orbital Sander.................................................................. ............. page 8 3M Hookit Sheets .................................................................................................. ..... page 9 Orbital Sander Accessories ............................................................................... .........page 10
3M Air-Powered File Belt Sander 3M File Belt Sander....................................................................................... ............. page 12 3M File Belt Sander Kit.................................................................................. ............. page 12 3M File Belts................................................................................................ ............. page 13 File Belt Sander Arm Attachments................................................................. ............. page 14 File Belt Sander Platen Pad Material............................................................. ............. page 17
3M Air-Powered Disc Sanders 3M Disc Sanders............................................................................................ .............page 18 3M™ Roloc™ Discs ....................................................................................... ............. page 19
3M Air-Powered Die Grinders 3M Die Grinders............................................................................................ ............. page 20 3M Roloc+ Abrasives.................................................................................... ............. page 21 3M Roloc and Roloc+ Accessories................................................................. .............page 21
3M Air-Powered Cut Off Wheel Tools 3M Cut Off Wheel Tools................................................................................. ............. page 22 3M Cut Off Wheels........................................................................................ ............. page 23
4
3M™ Power Tool System Product Catalogue
3M Air-Powered Inline Sanders 3M Inline Sanders.......................................................................................... .............page 24 3M Abrasive Belts.......................................................................................... .............page 25 Inline Sander Accessories.............................................................................. .............page 26
3M Air-Powered Paint Rectification Tools 3M Air-Powered Buffer.................................................................................. ............. page 27 3M Air-Powered Nib Removal Sanders........................................................... .............page 27 3M Mini Random Orbital Sander.................................................................... .............page 27
3M Electric Random Orbital Sanders 3M Electric Random Orbital Sanders............................................................. ............. page 28 3M Hookit Multihole Back-Up Pad................................................................. ............. page 28
3M Electric Polishers 3M Electric Polishers...................................................................................... .............page 29 3M™ Perfect-it™ lll Polishing Back-up Pad..................................................... .............page 29 3M™ Finesse-it™ System............................................................................... .............page 30 3M™ Perfect-it™ colour code system............................................................. ............ page 31
3M Portable Dust Extraction Units 3M Portable Dust Extraction Units.................................................................. ............ page 32 3M Portable Dust Extraction Unit Accessories................................................ ............ page 33
Spare Parts & Tool Schematics Spare Parts & Tool Schematics...................................................................... ............ page 34
Terms & Conditions Terms & Conditions........................................................................................ ............ page 53
3M™ Electric Power Tool System Catalogue
3M™ Customer Service
3M Customer Service The 3M Customer Technical Centre Located at the 3M Atherstone UK manufacturing plant, the Customer Technical Centre has been established to help you identify the most cost effective combination of abrasives, power tools and techniques for your particular application.
The 3M Customer Service Team Atherstone Manufacturing plant
To find out more information on the huge range of abrasives and accessories 3M manufacture please contact our Customer Service Team on +44 (0)870 60 80 90 or visit www.3M.co.uk/abrasives 3M Health & Safety Helpline For advice on the correct personal protective equipment Telephone: 0870 60 800 60 (United Kingdom) 1 800 320 500 (Ireland)
Atherstone Customer Technical Centre
2
3M™ Power Tool System Product Catalogue
Available Monday to Friday - 9.00am until 5.00pm
After Sales Care
After Sales Care Warranty 3M offer you a 12 month warranty from the day the machine was purchased, and a 6 month warranty for all repaired parts even if this is longer than the overall warranty. Consumable parts and damage due to misuse are not covered as part of this warranty. Warranty repairs must be performed by an authorised 3M Warranty Repair Centre Please fax your completed warranty card to: 0161 237 1106 (United Kingdom) 01 280 3509 (Ireland) or register online at www.3M.co.uk/airtoolswarranty Spare Parts Spare Parts are available for every 3M Power Tool and are listed in the user manual of each tool, or at the back of this brochure. To purchase spare parts please contact our Customer Service Team or visit www.3M.co.uk/abrasives Vibration Declared vibration levels found in tool manuals are in accordance with EN12096; measurements carried out in accordance with standard EN ISO 8662-8:1997. The noise and vibration values stated are from laboratory testing in conformity with stated codes and standards and are not sufficient risk evaluation. Values measured in a particular work place may be higher than the declared values. The actual exposure values and amount of risk or harm experienced to an individual is unique to each situation and depends upon the surrounding environment, the way in which the individual works, the particular material being worked, work station design, as well as upon the exposure time and the physical condition of the user. 3M cannot be held responsible for the consequences of using declared values instead of actual exposure values for any individual risk assessment.
Safety Icons Respiratory protection suggested Eye protection suggested Ear protection suggested Protective clothing suggested Extra level of eye protection suggested
3M™ Power Tool System Product Catalogue
3
Air-Powered Random Orbital Sanders Air-Powered Random Orbital Sanders Engineered to work hand-in-hand with the 3M™ Abrasives and Accessories you’ve always trusted, the 3M Air-Powered Random Orbital Sander provides the power and performance to get the job done with even better results. n Impressive power to weight ratio. n P erfectly balanced back-up pad designed to work in harmony with the 3M Air-Powered Random Orbital Sander range. n S uperior balance for reduced vibration, smooth running and operator comfort. n Ready to use with integral swivel hose adaptor. n Available in a range or orbits and vacuum systems.
9.5mm Diameter Orbit Most aggressive sanding
Description
Gold 9.5mm
5mm Diameter Orbit General purpose sanding
Description
Silver 5mm
2.5mm Diameter Orbit Fine finish sanding
Description
Chrome 2.5mm
Lever indicates orbit diameter
3M Self-Generated Vacuum Random Orbital Sander n S upplied with a self-contained dust collection system to effectively trap and contain airborne particles. n Can also be attached to a central vacuum system.
DCBA
4
RPM
12,000
Vacuum
Self-Generated
Motor HP
0.28
Part Number
Item
Weight
Length
Height
20316
75mm (2.5mm orbit)
0.57 kg
186 mm
79 mm
20319
125mm (5mm orbit)
0.89 kg
219 mm
83 mm
20322
125mm (2.5mm orbit)
0.89 kg
219 mm
83 mm
20462
150mm (5mm orbit)
0.94 kg
232 mm
83 mm
20464
150mm (2.5mm orbit)
0.94 kg
232 mm
83 mm
3M™ Power Tool System Product Catalogue
Air-Powered Random Orbital Sanders 3M Central Vacuum Random Orbital Sander n S upplied ready with swivel hose adaptor to attach to any central vacuum system for efficient evacuation of dust and debris.
DCBA RPM
12,000
Vacuum
Central
Motor HP
0.28
Part Number
Item
Weight
Length
Height
20315
75mm (2.5mm orbit)
0.57 kg
186 mm
79 mm
20318
125mm (5mm orbit)
0.87 kg
211 mm
83 mm
20321
125mm (2.5mm orbit)
0.87 kg
211 mm
83 mm
20461
150mm (5mm orbit)
0.91 kg
223 mm
83 mm
20463
150mm (2.5mm orbit)
0.91 kg
223 mm
83 mm
3M Two-Hand Random Orbital Sander Where extra leverage and power is required, choose the 3M Air-Powered Two-handed Random Orbital Sander for more demanding applications n Low profile balanced back-up pad for smooth operation n E rgonomically designed grip and moulded body for improved handling and toughness n 9.5 mm orbit provides fast and efficient operation
RPM
12,000
Vacuum
Non-Vacuum / Central
Motor HP
0.46
n T wo-Hand functionality with* or without removable side handle *recommend use with handle for reduced vibration
DCBA
Part Number
Item
Weight
Length
Height
28337
150mm (9.5mm orbit)
1.32 kg
328 mm
113 mm
3M™ Power Tool System Product Catalogue
5
Hookit™ Discs Hookit Discs 3M Hookit Abrasive Disc 245 Stiff D-weight paper gives a strong backing and long product life. Resin bond resists heat to prevent premature ˝ burning˝ . Applications: Initial and intermediate sanding on solid wood furniture, wood and metal door frames and other hard and soft wood, plastic and metal surfaces.
Mineral
Aluminium Oxide
Backing
D-Weight
Coating
Open
Grade Range
P40 - P120
Materials: -Wood -Metal -Paints -Fillers -Plastics
DCBA 3M Hookit Abrasive Disc 255P C-weight paper backing gives good mineral support for longer product life and sustained cutting action. Features enhanced anti-loading coating to extend product working life. Applications: Intermediate and final sanding of furniture parts, varnished surfaces, kitchen counter-tops, plastic parts.
Mineral
Aluminium Oxide
Backing
C-Weight
Coating
Open
Grade Range
P80 - P500
Materials: -Lacquered hard and soft wood -Paints -Plastics -Solid surface materials (e.g. Corian™) -Metal
DCBA
6
3M™ Power Tool System Product Catalogue
Hookit Discs 3M Hookit Abrasive Disc 266L A long lasting, micron graded fine finishing film disc. Incorporates a Frecut Anti Loading Coating to reduce loading, resulting in longer life and increased sanding productivity. Recommended where a quality, ultra smooth finish is important. Materials:
Mineral
Aluminium Oxide
Backing
3mil Polyester Film
Coating
Closed
Grade Range
100 Micron - 9 Micron
- UPVC window frames - Acrylic panes - GRP - Solid surface materials (e.g. Corian™) - Paint and lacquer - Aluminium
DCBA
3M Hookit Abrasive Disc 734U/334U In Coarser grades the unique 51 hole design captures particles through the spiral holes, optimising extraction whilst increasing cut and improving aggression where you need it most with 3M Cubitron mineral. In Finer grades the unique 177 hole design provides the ultimate in dust extraction for fine particles giving you a cleaner, safer working environment, reducing the need for rework. 334U discs unique anti-loading construction allows discs to carry on cutting for longer. Mineral
Cubitron™/Aluminium Oxide
Backing
C-Weight
Coating
open
Grade Range
P80 - P500
The multi-hole pattern means there is no need to align holes, allowing for quick disc changeover. Materials: -Lacquered hard and soft wood -Paints -Plastics -Solid surface materials (e.g. Corian™) -Metal
DCBA
3M™ Power Tool System Product Catalogue
7
Air-Powered Orbital Sanders Air-Powered Orbital Sanders Designed to maximise finishing performance on flat surfaces. Ideal for sanding edges, sides and in corners n Impressive power to weight ratio n Ergonomically designed grip for improved handling and ease of use n P erfectly balanced to help reduce vibration, for smooth running and operator comfort
3M™ Self-Generated Vacuum Orbital Sander n S upplied with a self-contained dust collection system to effectively trap and contain airborne particles. n Can also be attached to a central vacuum system.
RPM
10,000
Vacuum
Self Generated
Motor HP
0.24
DCBA
Part Number
Item
Weight
Length
Height
20431
75mm x 100mm
0.72 kg
142.3 mm
83.5 mm
3M Central Vacuum Orbital Sander n S upplied ready with swivel hose adaptor to attach to any central vacuum system for efficient extraction of dust and debris.
DCBA
8
RPM
10,000
Vacuum
Central
Motor HP
0.24
Part Number
Item
Weight
Length
Height
20430
75mm x 100mm
0.69 kg
139.3 mm
83.5 mm
3M™ Power Tool System Product Catalogue
Hookit™ Sheets Hookit Sheets 3M Hookit Paper Sheet 338U C-Weight paper backed disc with Hookit attachment for portable sanders and off hand sanding. Applications: Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.
Mineral
Aluminium Oxide
Backing
C-Weight
Coating
Semi-Open
Grade Range
P80 - P500
Materials: -Wood -Metal -Paints -Fillers -Plastics
DCBA 3M Hookit Paper Sheet 245 Stiff D-Weight paper gives a strong backing and long product life. Resin bond resists heat to prevent premature burning. Features the 3M Hookit fixing system, meaning that with Hookit accessories, these products can be attached and reattached as needed. Applications: Initial and intermediate sanding on solid wood furniture, wood and metal door and window frames and other hard and soft wood, plastic and metal surfaces by hand with portable sanding machines. Mineral
Aluminium Oxide
Backing
D-Weight
Coating
Open
Grade Range
P40 - P120
Materials: -Wood -Metal -Paints -Fillers -Plastics
DCBA
3M™ Power Tool System Product Catalogue
9
Orbital and Random Orbital Sander Accessories Orbital and Random Orbital Sander Accessories 3M™ Self Generating Vacuum Bag Patent pending system for collecting dust when using SGV sanders. Eliminates the need for cumbersome vacuum hoses.
Part Number
Item
Dimension
Units Per Pack
Units Per Case
20452
Self Generating Vacuum Bag
280mm x 125mm
10
50
20453
Self Generating Vacuum Bag Adaptor
25mm Ext Hose Thread x 25mm ID
10
10
3M™ Hookit™ Low Profile Back-Up Pad A tough, durable plastic hub and foam body. Pads are lightweight, shock resistant and well balanced.
Part Number
Item
Pattern
Max RPM
Units Per Pack
Units Per Case
20350
75mm
3 Holes
12,000
10
10
20353
125mm
44 Holes
12,000
10
10
20465
150mm
50 Holes
12,000
10
10
20242
75mm x 100mm
4 Holes
10,000
10
10
3M Air Tool Lubricant Used to keep pneumatic air tools running efficiently. Use 2-3 drops at the end of each day, or as needed, to maintain tool performance.
10
Part Number
Item
Dimension
Units Per Pack
Units Per Case
20451
Air Tool Lubricant
4 oz bottle
12
12
3M™ Power Tool System Product Catalogue
Orbital and Random Orbital Sander Accessories
25mm EXT Hose Thread x 25mm Friction Fitting Adaptor Part Number
Item
Selling Unit
Units Per Pack
Units Per Case
20339
25mm EXT Hose Thread x 25mm Adaptor
adaptor
1
1
25mm INT Hose Thread x 32mm INT Hose Thread Part Number
Item
Selling Unit
Units Per Pack
Units Per Case
20340
25mm INT Hose Thread x 32mm INT Hose Thread
adaptor
10
10
25mm EXT Hose Thread x 25mm ID Part Number
Item
Selling Unit
Units Per Pack
Units Per Case
20453
25mm EXT Hose Thread x 25mm ID
adaptor
10
10
3M™ Power Tool System Product Catalogue
11
Air-Powered File Belt Sander Air-Powered File Belt Sander Ideally suited for use with 3M™ Abrasive and Scotch-Brite™ Belts for a variety of metalworking applications. Grind, deburr and blend from contact wheel or platen, finish and polish from slack of belt. n L ightweight, durable construction and 0.6 HP motor helps provide an excellent power to weight ratio n Both belt head and handle rotate a full 360 degrees to easily access hard-to-reach areas n Innovative belt cover allows easy access for quick belt changes. n 3M™ Greptile™ Grip gives a comfortable and secure grip. n Warm composite housing minimses vibration for less operator fatigue. n 3M exhaust system acts to reduce noise levels, clear debris and maintain cool belt running for enhanced results.
3M Air-Powered File Belt Sander n T he 3M File Belt Sander comes complete with one standard arm (28368), 3M™ Air Tool Lubricant (20451) and both a steel and rubber drive wheel. n 3mm–19mm Width x 457mm–610mm Length
CBAD RPM
22,000
Motor HP
0.6
Part Number
Item
Weight
Length
28366
Air-Powered File Belt Sander
1.3 kg
370 mm
3M Air-Powered File Belt Sander Kit This convenient kit comes packed in a molded case and includes: Tool: n 3M™ File Belt Sander Abrasives: n 5x 947D P60 13x457
n 5x 337DC A160 13x457
n 5x DF-BL ACRS 13x457
n 5x DF-BL AMED 13x457
n 5x DF-BL AFIN 13x457 Accessories: n 2x popular attachment arms (28368 and 28370) n 0.5 oz. sample of 3M™ Air Tool Lubricant n Steel and rubber drive wheels n 10x Platen Arm Pads (28379) Part Number 28367UK
12
3M™ Power Tool System Product Catalogue
Item Air-Powered File Belt Sander Kit
File Belts File Belts 3M™ Cubitron™ File Belt 947D Contains Cubitron Abrasive Grain for long life and fast cut. The grinding aid reduces heat build-up to give a cooler cut on heat sensitive metals. Flexible backing to handle contours and curved metal surfaces. Applications: Medium pressure applications, refining, dimensioning and stock removal, scale and parting line removal, weld leveling, deburring. Mineral
Cubitron™
Backing
X-Weight
Grade Range
P60 - P120
Materials: - Metal
DCFA 3M™ Trizact™ CF File Belt 337DC Macro-replicated structured abrasive results in a consistent predictable cut rate and finish. Exceptional life when compared to conventional abrasives. Soft edge structure and flexible backing produce a good blended finish. Applications: Ideal for fine finishing on metal Mineral
Aluminium Oxide
Backing
XF-Weight
Grade Range
A300-A30
Materials: -Metal
DCFA
Scotch-Brite™ File Belt DF-BL Reinforced low-stretch backing for better tracking in narrow belt applications. Increased conformability for smoother running on small diameter contact wheels. Reduced chunking meaning less debris for improved operator environment and fewer random scratches. Longer life for fewer belt changeovers. Applications: Blending and finishing. Mineral
Aluminium Oxide
Backing
Low-Stretch
Grade Range
ACRS-AFIN
Materials: -Metal
DCFA 3M™ Power Tool System Product Catalogue
13
File Belt Sander Accessories File Belt Sander Arm Attachments A variety of attachment arms are available to suit a diverse range of applications
Standard Arm For use on contact wheel or platen.
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28368
Standard Arm
1
150
13 x 457
Thin Arm For access to narrower areas/channels
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28369
Thin Arm
1
150
13 x 457
Corners 1 Arm Sand channel and grooves with contact wheel and strapping on slack of belt
14
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28370
Channel Arm
1
140
13 x 457
3M™ Power Tool System Product Catalogue
File Belt Sander Accessories
Thick Arm Thicker than standard arm for use with wider belts on contact wheel or platen
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28371
Thick Standard
1
150
19 x 457
Corners 2 Arm Sand channel and grooves with narrow belt on contact wheel or strapping on slack of belt
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28372
Narrow Channel Arm
1
140
3 x 457
520mm Arm For use with wider belts on contact wheel or platen where extra reach is needed
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28373
520mm Arm
1
175
19 x 520
3M™ Power Tool System Product Catalogue
15
File Belt Sander Accessories Curved Arm For blending flat areas on platen
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28374
Curved
1
150
13 x 457
Vessel Arm Sand channel and fillet areas on contact wheel or strapping on slack of belt
Part Number
Item
MOQ
Reach (mm)
Belt Size (mm)
28375
Vessel
1
190
6 x 610
File Belt Sander Extension Arm Used to extend arms to 610mm length. Can be used with same attachment arms used for 457mm length arms.
16
Part Number
Item
Reach (mm)
Belt Size (mm)
28376
File Belt Sander Extension
225
610
3M™ Power Tool System Product Catalogue
File Belt Sander Accessories File Belt Sander Platen Pad Material
Part Number
MOQ
Belt Size (mm)
Item
Grade
28377
File Belt Sander Platen Pad Material
Soft
10
13 mm
28378
File Belt Sander Platen Pad Material
Soft
10
19 mm
28379
File Belt Sander Platen Pad Material
Hard
10
13 mm
28380
File Belt Sander Platen Pad Material
Hard
10
19 mm
28381
File Belt Sander Platen Pad Material
Thin
10
13 mm
28382
File Belt Sander Platen Pad Material
Thin
10
19 mm
3M™ Power Tool System Product Catalogue
17
Air-Powered Disc Sander Air-Powered Disc Sander Designed to allow greater access to work pieces compared to conventional larger disc attachments. Now you can combine the ease of use of the 3M™ Roloc™ Quick-Release System with the high performance and durability of a 3M Air-Powered Disc Sander. n A ll models feature a powerful, high torque air motor to optimise overall performance of the 3M Roloc disc system n Easier-handling, lightweight, compact design generates less vibration, while improving operator control n 3 M™ Greptile™ Gripping Material helps provide a more secure grip that can be held with less effort n R ear adjustable exhaust feature allows airflow to be directed away from the operator in any preferred direction n W orks in combination with the Roloc Quick Release System – discs lock securely in place with just half a twist. n P rovides a fast, efficient method for grinding, blending, deburring and finishing on all types of metal. n A ll models are supplied with a 3M Roloc Rubber Back-Up Pad and 6mm Collett.
3M Air-Powered Disc Sander n U se the 75mm 1HP version for tougher applications where more control and power is required. Includes removable side handle for ease of use. n U se the 50mm 0.5 HP version for light grinding, finishing and deburring where its important to confine the area of work.
DCFA
18
Part Number
Item
Motor HP
RPM
Weight
Length
Height
25124
50mm
0.5
20,000
0.5 kg
171.5 mm
69.9 mm
25125
75mm
1
15000
1 kg
209.6 mm
82.6 mm
3M™ Power Tool System Product Catalogue
3M™ Roloc™ Discs Roloc Discs 3M™ Roloc™ Cloth Disc Durable Edge 977F These discs have a reinforced backing that provides improved life, edge durability and cut rate to meet growing production demands, especially where frayed discs hinder productivity. Applications: Grinding, blending and deburring Mineral
3M™ Cubitron™
Backing
Y-Weight / 2 ply
Grade Range
P36 - P80
Materials - All metals
DCBA
3M™ Roloc™ Surface Conditioning Disc SC-DR Scotch-Brite Web enables simultaneous blending and finishing, reducing process time. Features the 3M Roloc Quick Release System for quick and easy disc change. Highly durable product for aggressive applications. Great for edge deburring applications. Applications: Removing rust and cleaning flat metal parts, surface preparation after weld seam removal. Super Duty grade can be used to remove small welds.
Mineral
Aluminium Oxide
Backing
Y-Weight
Grade Range
Super Duty - AFIN
Materials: -All metals
DCBA
3M Roloc Rubber Back-Up Pad
DCBA Part Number
Item
Grade
Maximum RPM
Units Per Pack
Units Per Case
A45095
50mm
Hard
25,000
5
5
45091
75mm
Hard
20,000
5
5
3M™ Power Tool System Product Catalogue
19
Air-Powered Die Grinder Air-Powered Die Grinder Introducing the versatile range of 3M™ Air-Powered Die Grinders with choice of operating speeds and power designed to tackle a variety of applications utilising shaft-mounted and 3M™ Roloc+™ products. Ideal for easy use in small and confined areas n T he compact design and built-in safety features make these the tools of choice for any job. n 3 M™ Greptile™ Gripping material helps provide a more secure grip that can be held with less effort. n R ear adjustable exhaust feature allows airflow to be directed away from the operator in any preferred direction. n All models are supplied with a 6mm Collett.
3M Air-Powered Die Grinder n P owerful 1 HP 3M™ Die Grinders are excellent for optimised results in heavier applications. Lower speed machines feature an offset gear box for higher torque. n T he 0.5 HP models feature a high output air motor. This provides high torque performance resulting in constant speed under load for optimum performance of abrasive product. The 4,000 RPM tool features a planetary gearing system for increased torque. n C hoose the extended shaft grinder where extra reach is needed for cylindrical polishing, buffing and deburring applications
DCBA
20
Part Number
RPM
Motor HP
Weight
Length
25126
20,000
1
0.77 kg
196.9 mm
25127
18000
1
0.77 kg
196.9 mm
25128
12000
1
0.93 kg
254 mm
25129
8000
1
0.93 kg
254 mm
28345
18000
0.5
0.512 kg
174.6 mm
28346
18000 [extended]
0.5
0.697 kg
269.9 mm
28347
4,000
0.5
0.717 kg
200 mm
3M™ Power Tool System Product Catalogue
Radial Bristle Brushes Die Grinder Abrasives Scotch-Brite™ Bristle Brush BB-ZS Curved, thinner bristles for greater conformability. Works well on irregular surfaces or detailed features. Increased safety when converting from wire brushes. Applications: Cleaning, finishing, deburring of various parts where extreme conformability is required (machined parts, turbine blades, threads, engine parts etc.). Weld discolouration removal (stainless steel). Mineral
Cubitron™ Blend
Construction
Layers of moulded discs impregnated with abrasive, preshaft mounted to form a brush
Grade Range
P80 - P220
Materials: -Metal -Wood -Plastics and composite materials
DCBA
Roloc+ Cut & Polish Flap Brush PF-ZR Three dimensional Scotch-Brite web produces consistent, repeatable results without damaging the workpiece. Open, flexible flap construction is soft and pliable to produce uniform surface finishes without chatter marks. Applications: Satin finishing and light deburring of larger components where the machine is taken to the part. Materials: -Wood -Metal
Mineral
Aluminium Oxide
Construction
Flaps of Scotch-Brite Web bonded to a central core
Grade Range
AMED
DCBA
3M Roloc No 1 Holder
Part Number
Item
Units Per Pack
Units Per Case
09884
6mm x 25mm
5
5
3M™ Power Tool System Product Catalogue
21
Air-Powered Cut Off Wheel Tools Air-Powered Cut Off Wheel Tools Designed to easily handle a variety of challenging cutting applications. All models feature a powerful 1HP high torque air motor to optimise the cutting performance of 3M™ Cut Off Wheels n T he compact design and built-in safety features make these the tools of choice for any job n 3 M™ Greptile™ Gripping Material helps provide a more secure grip that can be held with less effort n A djustable directional exhaust feature allows airflow to be directed away in any direction preferred
3M Air-Powered Cut Off Wheel Tool n F or heavy duty applications choose the range of Right Angle Cut Off Wheel Tools, featuring a removable side handle. Use with Type 41 115mm and 127mm Cut Off Wheels n F or smaller applications choose the range of lightweight Straight Shaft Cut Off Wheel Tools. Use with Type 41 75mm and 102mm Cut Off Wheels
Motor HP
22
DCFA
1
Part Number
Item
RPM
Weight
Length
Height
20233
75 mm
25000
0.94 kg
196.9 mm
76.2 mm
20234
102 mm
20,000
1.02
196.9 mm
82.6 mm
20243
115 mm
12000
1.49
222.3 mm
133.4 mm
20235
127 mm
12000
1.57
222.3 mm
133.4 mm
3M™ Power Tool System Product Catalogue
Cut Off Wheels Cut Off Wheels 3M™ Green Corps™ Cut Off Wheel Lasts up to eight times longer than conventional aluminium oxide products. Combination of high speed rating and 3M™ Cubitron™ Mineral content means a cool, sharp, quick cut with minimal product wear. Applications: Cutting sheet metal, frames, rails, bars, clamps and rusted bolts. Materials: All metals, GRP
Mineral
Cubitron™
Construction
resin bonded, fibre reinforced wheel
Type
41
FDCB
3M Inox Cut Off Wheel Good performance and a consistent cut rate at an economical price. Accurate clean cutting for light precise applications on all metals (including stainless steel). Fully compliant with EN12413. Materials: All metals (including stainless steel)
FDCA Mineral
Aluminium Oxide
Construction
resin bonded, fibre reinforced wheel
Type
41
3M™ Power Tool System Product Catalogue
23
Air-Powered Inline Sander Air-Powered Inline Sander A single system for graining, blending and finishing in stainless steel fabrication. Ideal for flat accessible areas. n B oth models feature a powerful 1 HP high torque air motor to optimise performance in all applications n T he compact design and fully adjustable side handle collar improve operator control n 3 M™ Greptile™ Grip material helps provide a more secure grip that can be held with less effort n A djustable exhaust feature allows airflow to be directed away from the operator in any preferred direction n S upplied with spindle extension to fit expander wheels and pneumatic drums
3M Air-Powered Inline Sander n 3 ,500 RPM version is the recommended running speed on most applications to achieve optimum results. n 1 ,600 RPM version where a longer scratch pattern is required. Can also be used with Scotch-Brite™ Wheels where a slower running speed is required. n R ubber Slotted Expander Wheel is used in more demanding surface finishing applications Motor HP
n P neumatic Drums are a less aggressive option to produce a consistent satin finish and to reduce the likelihood of chatter
1
DCBA Part Number
24
RPM
Weight
Length
28338
1,600
1.51 kg
251 mm
28339
3,500
1.2 kg
216 mm
3M™ Power Tool System Product Catalogue
Inline Sander Belts Inline Sander Belts 3M™ Cubitron™ Belt 947D Contains Cubitron™ Abrasive Grain for long life and fast cut. The grinding aid reduces heat build-up to give a cooler cut on heat sensitive metals. Flexible backing. Applications: Ideal for refinining imperfections and fibre disc scratch marks to produce a suitable finish prior to final blending. Materials: Metal Mineral
Cubitron™
Backing
X-Weight
Grade Range
P60 - P120
DCBA
3M™ Trizact™ CF Belt 337DC Macro-replicated structured abrasive results in a consistent predictable cut rate and finish. Exceptional life when compared to conventional abrasives. Soft edge structure and flexible backing produce a good blended finish. Applications: Ideal for fine finishing on metal. Materials: Metal
Mineral
Aluminium Oxide
Backing
XF-Weight
Grade Range
A300-A30
DCBA
Scotch-Brite™ Belt DF-BL Improved conformability for smoother running. Less chunking meaning less debris for improved operator environment. Longer life for fewer belt changeovers and improved finish for less random scratches. Applications: Blending and finishing. Materials: Metal
DCBA Mineral
Aluminium Oxide
Backing
Low-Stretch
Grade Range
ACRS - AFIN
3M™ Power Tool System Product Catalogue
25
Inline Sander Accessories Inline Sander Accessories Rubber Slotted Expander Wheel Internally slotted rubber drum expands with centrifugal force to keep abrasive belts tight while grinding
Part Number
Item
Size
Units Per Pack
Units Per Case
28348
Rubber Slotted Expander Wheel
127mm x 89mm
1
1
Pneumatic Drum Inflate the pneumatic wheel to the minimum pressure needed to hold the belt in place
Part Number
Item
Size
Units Per Pack
Units Per Case
886030
Pneumatic Drum
127mm x 89mm
1
1
Part Number
Item
Size
Units Per Pack
Units Per Case
45038
Spindle Extension
5/8˝ - 11 Thread
1
1
Spindle Extension
26
3M™ Power Tool System Product Catalogue
Paint Rectification Tools Paint Rectification Tools 3M™ Air-Powered Buffer n T he right angle shape of this 3M™ Buffer allows operators to reach difficult areas whilst its large orbital action allows for faster polishing. n T he tool is ergonomically designed for reduced vibration and comfort in use.
RPM
8,000
Motor HP
0.26
ABCD
Part Number
Item
28333
75mm (12mm orbit)
Weight
Length
0.82 kg 233 mm
Height 99.6 mm
3M Air-Powered Nib Removal Sander n A very compact and lightweight orbital sander. The right-angle design means that it is easy to see the area being sanded for improved accuracy and ease of use. n Includes 3M™ Finesse-it™ Stikit™ Hard Pad 3125H. RPM
7,500
Motor HP
0.067
DCFA
Part Number
Item
Weight
3125
32mm (3mm orbit)
0.45 kg
3M Mini Random Orbital Sander n T he compact Mini Random Orbital Sander is a light weight nib removal tool for easier control and reduced operator fatigue. n It has a 3M™ Roloc™ fixing to accept the full range of Finesse-it™ Roloc™ sanding backup pads. n Includes 3M™ Roloc™ 02345 w/Stikit Face.
RPM
8,000
Motor HP
0.27
CDFA
Part Number
Item
Weight
20244
32mm (5mm orbit)
0.45 kg
3M™ Power Tool System Product Catalogue
27
Electric Random Orbital Sanders Electric Random Orbital Sanders The powerful and beautifully balanced 3M™ Electric Random Orbital Sander, incorporating an efficient self generated dust extraction system, is designed to work hand-in-hand with the 3M™ Abrasives and Accessories you already trust. n Ergonomic grip for better handling and operator comfort n Close rubber skirt and shroud for improved dust extraction n Powerful 450 watt motor for shorter processing times n Robust design for longer life n Variable speed for greater versatility
3M Electric Random Orbital Sander n Increased efficiency, improved comfort. n T he new 3M Electric Random Orbital Sander is designed to work handin-hand with the 3M products you already trust. n T he back-up pad and tool are precision balanced to work in harmony reducing vibration.
RPM
5,000 – 10,000
Vacuum
Self-Generated / Central
Power (Watt)
450
DCFA
Part Number
Item
Voltage
Weight
Current
64385
150mm (3mm orbit)
240V
2.1 kg
2A
64381
150mm (5mm orbit)
240V
2.1 kg
2A
64382
150mm (5mm orbit)
110V
2.1 kg
4A
64386
150mm (3mm orbit)
110V
2.1 kg
4A
3M Hookit Multihole Back-Up Pad Air flows directly from the surface to the tool. 15-hole design allows for a more even extraction across the whole of the disc surface. The ‘4-in line’ holes make alignment of disc and pad easy.
28
Part Number
Item
Pattern
Max RPM
Units Per Pack
Units Per Case
64412
150mm
15 hole
22,000
1
5
3M™ Power Tool System Product Catalogue
Electric Polisher Electric Polisher The 3M™ Electric Polisher is engineered to work hand-in hand with the 3M™ Compound, Pads and Accessories you already trust. n A powerful 1100 watt motor for better handling and shorter processing times n S pindle locking button for quick easy pad change and greater operator efficiency n Designed to rest on its back to keep the pad contamination free n Variable speed for greater versatility
3M Electric Polisher n A n impressive power to weight ratio for improved comfort and performance. n E ngineered handle and grip areas for greater operator comfort and reduced vibration.
ADCB RPM
700 – 1,850
Power (Watt)
1,100
Part Number
Item
Voltage
Weight
Current
64394 64393
200mm
110V
1.9 kg
10.6A
200mm
240V
1.9 kg
5.3A
3M™ Perfect-it™ lll Polishing Back-up Pad
Part Number
Item
Units Per Pack
Units Per Case
09552
125mm M14
1
5
3M™ Power Tool System Product Catalogue
29
3M™ Finesse-it™ System 3M™ Finesse-it™ System 3M Finesse-it Natural Buffing Pad A versatile general use blended wool pad with stiffer central hub for more cutting power. Has an untwisted yarn construction that gives excellent cut and finish
3M Finesse-it Finishing Material Quickly and effectively removes minor scratches. Produces a brilliant, deep, wet look shine.
3M Finesse-it Kit n A portable system for the removal of small scratches and imperfections on paint, perspex and solid surface to achieve perfect finishes n C oordinated components of the system guarantee efficiency and process stability n The kit contains:-
30
3M™ Power Tool System Product Catalogue
•
Microfinishing and 3M™ Trizact™ discs
•
Polishing pads and compounds
•
Sanding accessories
3M™ Perfect-it™ colour code system 3M™ Perfect-it™ colour code system Compounding A fast acting pad, compound and cloth system that removes sanding scratches from refinished or original paintwork and helps achieve a superior high gloss finish. n F ast cut-rate performance n Superior high gloss finish n Non scratching, low linting, durable cloth
DCFA Part Number
Item
Size
Units Per Pack
Units Per Case
50417
Fast Cut+ Compound
1 Litre
1
12
50487
Compounding Pad
150mm
2
10
60671
High Performance Cloth
3
10
Polishing A fine finish pad, compound and cloth system designed specifically for modern scratch resistant clear coat paint systems n E xcellent finish n Long lasting waffle foam n Super soft, non-linting microfibre cloth easily removes residue.
DCFA Part Number
Item
Size
Units Per Pack
Units Per Case
80349
Extra Fine Compund
1 Litre
1
12
50488
Extra Fine Polishing Pad
150mm
2
5
50400
Ultra Soft Cloth
1
20
Hologram Removal / Gloss Enhancement A pad, compound and cloth system designed for the elimination of holograms and swirl marks. n Ultimate high gloss finish n Easily removes swirl marks and holograms n Super soft, non-linting microfibre cloth easily removes residue.
DCFA Part Number
Item
Size
Units Per Pack
Units Per Case
50383
Polish
1 Litre
1
12
50388
Ultrafina High Gloss Pad
150mm
50486
Ultra Soft Polishing Pad
2
5
1
20
3M™ Power Tool System Product Catalogue
31
Portable Dust Extraction Unit Portable Dust Extraction Unit The new 3M™ Portable Dust Extraction Unit is designed to work hand-in-hand with high quality 3M™ Electric and Air-Powered Tools as a comprehensive system. Enjoy quieter, longer and more consistent high suction, thanks to an innovative electromagnetic pulse filter cleaning system. n Innovative dual filter concept for high suction and more efficient dust collection provides a healthier working environment n A utomatic electromagnetic pulse filter cleaning for a constant airflow and consistent working n Works with both electric and air-powered tools n Compact design for greater mobility. n Anti-static hose. n Automatic on/off switch.
3M Portable Dust Extraction Unit n 25L compact size for increased mobility. n 50L size for increased capacity and longer more consistent working. n Units come complete with one 35mm hose and two plastic bags. n U nits are dust class M for use with Hazardous dusts with MAK values > 0.1mg/m3. n A pplications include Automotive Paint, Glass Fibre, Solid Surface, Composites and Wood. Colour Power (Watt)
Black and Grey 1400
Part Number
32
Item
Size
Voltage
Dust Class
Airflow on the hose end (M3/h)
64401
Portable Dust Extraction Unit
25L
240V
M
140
64409
Portable Dust Extraction Unit
50L
240V
M
140
64402
Portable Dust Extraction Unit
25L
110V
M
140
64410
Portable Dust Extraction Unit
50L
110V
M
140
3M™ Power Tool System Product Catalogue
Protable Dust Extraction Unit Accessories Portable Dust Extraction Unit Accessories Y Adaptor Part Number
Item
Selling Unit
Units Per Pack
Units Per Case
64418
Y Adaptor
adaptor
1
1
Part Number
Item
Selling Unit
Units Per Pack
Units Per Case
64419
Graduated Rubber Sleeve
adaptor
5
5
Item
Selling Unit
Units Per Pack
Units Per Case
Polyester Folded Filter Cassette
Cartridge
2
2
Part Number
Item
Selling Unit
Units Per Pack
Units Per Case
64421
PE Bag
Bag
5
5
Graduated Rubber Sleeve
Polyester Folded Filter Cassette Part Number
PE Bag
25mm EXT Hose Thread x 25mm Friction Fitting Adaptor Part Number
Item
Selling Unit
Units Per Pack
Units Per Case
20339
25mm EXT Hose Thread x 25mm Adaptor
adaptor
1
1
3M™ Power Tool System Product Catalogue
33
Spare Parts & Tool Schematics Contents Spare Parts & Tool Schematics Contents Random Orbital Sander 125mm and 150mm............................................................ page 35 Random Orbital Sander 75mm.................................................................................. page 36 2 Hand Random Orbital Sander.................................................................................. page 37 Orbital Sander 75 x 100mm....................................................................................... page 38 File Belt Sander.......................................................................................................... page 39 Disc Sander 50mm.................................................................................................... page 40 Disc Sander 75mm.................................................................................................... page 41 Die Grinder 20,000 RPM and 18,000 RPM................................................................. page 42 Die Grinder 12,000 RPM and 8,000 RPM................................................................... page 43 Cut-off Wheel Tool 75mm and 100mm...................................................................... page 44 Cut-off Wheel Tool 115mm and 125mm.................................................................... page 45 Inline Sander 1,600 RPM........................................................................................... page 46 Inline Sander 3,500 RPM........................................................................................... page 46 Random Orbital Buffer............................................................................................... page 47 Nib Removal Sander.................................................................................................. page 48 Mini Random Orbital Sander...................................................................................... page 49 Electric Random Orbital Sander 110v and 240v......................................................... page 50 Electric Polisher 110v and 240v................................................................................. page 51 Portable Dust Extraction Unit 110v and 240v............................................................. page 52
34
3M™ Power Tool System Product Catalogue
Spare Parts : Random Orbital Sander 125mm and 150mm 23 39
38
24
45
44
37
43 42
1
25
26
46
41
2
40
47
3
48
4
49
27
50
5
TO VACUUM SYSTEM FOR CENTRAL VAC
6 8
28 29
7
9
30
52
31
51
10 11
53
TO INLET
32
TO INLET
12
59
33 54
13 14
34
55
15 16
60
35
56
18 19 20 21 22
IT 1 2 3 4 5 6 7 8 9 10 11 12 13 13 13 13 13 13 14 15 16 17 18 19 20 21 22 23 23 23 24 25 25 25 26 27 28 29
P/N XPA0040 XPA0021 XPB0017 XPA0005 XPA0042 XPB0005 XPA0010 XPA0041 XPB0016 XPA0019 XPA0045 XPA0001 XPB0279 XPB0277 XPB0348 XPB0278 XPB0280 XPB0334 XPA0122 XPA0121 XPA0120 N/A XPA0938 XPA0016 XPA0017 XPA0018 XPB0018 XPA1351 XPA1352 XPA1447 XPA0031 XPB0320 XPB0321 XPB0322 XPA0015 XPA1330 XPA0008 XPA0043
57 61
58
36 ITEM
TORQUE SETTING in.-lbs. (Nm)
12 39
55 - 65 (6.2 - 7.3) 16 - 20 (1.8 - 2.3)
43 45 58
60 - 72 (6.8 - 8.1) 36 - 48 (4.1 - 5.2) 30 - 35 (3.4 - 3.9)
DESCRIPTION EXTERNAL RETAINING RING 10 X 26 X 8 BEARING - 2 SHIELDS REAR ENDPLATE CYLINDER ASSEMBLY 5 mm x 2.0 mm O-RING MACHINED ROTOR VANE 3 mm x 13 mm WOODRUFF KEY FRONT ENDPLATE 12 X 28 X 8 BEARING - 2 SHIELDS 39.4 mm x 3.1 mm O-RING LOCK RING 5 x 3/32 in ORBIT AirSHIELD Plus™ SHAFT BALANCER 5 x 3/16 in ORBIT AirSHIELD Plus™ SHAFT BALANCER 5 in x 5/16 in (8.0 mm) ORBIT ROS PLUS BALANCER 6 x 3/16 in. ORBIT AirSHIELD Plus™ SHAFT BALANCER 6 x 3/32 in. ORBIT AirSHIELD Plus™ SHAFT BALANCER 6 in x 5/16 in (8 mm) ORBIT AirSHIELD Plus™ SHAFT BALANCER FILTER DUCKBILL CHECK VALVE VALVE RETAINER N/A 12 x 28 x 16 DOUBLE ROW ANGULAR CONTACT BEARING - 1 SEAL SPACER 12.1 ID x 18.0 OD x 0.2 THK BELLEVILLE WASHER RETAINING RING SPINDLE LEVER FOR 3M 12,000 RPM ROS 2.5 mm (3/32 in) ORBIT LEVER FOR 3M 12,000 RPM ROS 5 mm (3/16 in) ORBIT LEVER FOR 3M 12,000 RPM ROS 8 mm (5/16 in) ORBIT LEVER SPRING PIN GRIP 2.5 in PMS RED 485 GRIP 2 3/4 in. PMS RED 485 GRIP 3 in. PMS RED 485 VALVESLEEVE LABELED HOUSING BLANK FOR 3M VALVESTEM ASSEMBLY 9 mm x 1.5 mm O-RING
62
IT 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 48 49 50 51
P/N XPB0014 XPA0039 XPA1346 XPA1347 XPA1348 XPA1777 NA XPA0062 XPA0068 XPA0166 XPA0009 XPA0007 XPA0014 XPA0013 XPA0044 XPA0006 XPA0778 XPA1338 XPA1354 XPA1355 XPA0854 XPA1340 XPA1333
52 XPA1490 52 XPA1489 53 53 54 55 56 57 58 59 60 61 62
XPA1488 XPA1487 XPA1343 XPA0048 XPA1345 XPA0047 XPA0769 XPA1434 XPC0109 XPA1668 XPA1669
NOTES: 1. DWGSCALE1 : 3 2. ITEMS 46AND49ARE TO BERETAINED ON THE BODYOF ITEMS47AND50USINGITEM48. 3. ITEM 17XPA0937"SHIM" NOT TO BEUSEDWITH "PLUS"BALANCERS WHICHAREDESIGNEDTO ACCEPT THEDOUBLE ROWBEARINGWITHOUTIT
DESCRIPTION SPEED CONTROL INTERNAL RETAINING RING 5/6 in. NON-VACUUM SHROUD - PMS 485C RED 5/6 in. SuperVAC™ SHROUD - PMS 485C RED Ø 6 In. SCREEN ABRASIVE ROS SuperVAC SHROUD - PMS 485C RED 24 mm PAD WRENCH FOR 3M - PMS 485 RED 1 Back-Up Pad supplied with each tool (type determined by model) INTERNAL MUFFLER MUFFLER INSERT MUFFLER HOUSING VALVE SEAT VALVE VALVE SPRING 1/4-18 NPT INLET BUSHING ASSEMBLY 14.0 x 1.5 O-RING SGV RETAINER 1 in./28 mm HOSE SEAL ASSEMBLYFOR 1 in./28 mm HOSE SuperVAC SGV SWIVEL EXHAUST FITTING - PMS 485C RED TAG W/ INSTRUCTION FOR 3M 1 in./28 mm HOSE SEAL TAG W/ INSTRUCTION FOR 3M 3/4 in./19 mm HOSE SEAL 3/4 in./19 mm HOSE SEAL ASSEMBLYFOR 3/4 in./19 mm HOSE SuperVAC SGV SWIVEL EXHAUST FITTING - PMS 485C RED SuperVAC SGV SKIRT/SHROUD ADAPTER - PMS 485C RED ASSY FOR Ø 1 in. PMS 485C RED VAC HOSE TO Ø 1 in./28 mm x 1 1/2 in. FRICTION FIT ADAPTER COUPLING AND AIRLINE ASSY FOR Ø 3/4 in. PMS 485 C RED VAC HOSE TO Ø 3/4 in. x 1 in./28 mm ADAPTER COUPLING AND AIRLINE ASSY FOR Ø 1 in. PMS 485 C RED VAC HOSE TO DOUBLE BAG FITTING AND AIRLINE ASSY FOR Ø 3/4 in.PMS485C RED VAC HOSE TO DOUBLE BAG FITTING AND AIRLINE ASSEMBLYFOR ROS SuperVAC™ CV 1 in./28 mm SWIVEL EXHAUST - PMS 485C RED M5 x 0.8 FLANGED NUT ASSEMBLYFOR ROS SuperVAC CV 3/4 in. SWIVEL EXHAUST - PMS 485C RED M5 WASHER HEX SOCKETBUTTONHEAD MACHINESCREW M5 x 10 VACUUMBAG FOR 3M VACUUM BAG INSERT 3M™ CLEAN SANDING FILTER BAG (5X12in) 3M™ FILTER BAG ADAPTOR,1in EXT HOSE THREADX 1in OD
3M™ Power Tool System Product Catalogue
35
Spare Parts : Random Orbital Sander 75mm 48 47
54
46
32
12 48 52 54 67
33 52 51 1
TORQUE SETTING Nm (in.-lbs.) 6.2 - 7.3 (55 - 65) 1.8 - 2.3 (16 - 20) 6.8 - 8.1 (60 - 72) 4.0 - 5.4 (36 - 48) 3.4 - 3.9 (30 - 35)
ITEM
53
50 34
57
49
35
2
56
3
59 TO VACUUM SYSTEM FOR CENTRAL VAC
55
4 6
5
36 58
8
60
37
9
7 38
10
TO INLET
61
39
11
40
12
TO INLET 68
41
13
69
62
14
63
16
42 64
15
18 65
17
20
26
19
27
21
43
22 66 24 28
23
67 44
29 25
30
45
31
70
71
Fig. # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
36
3M Part No. 3MA0040 3MA0021 3MB0017 3MA0005 3MA0042 3MB0005 3MA0010 3MA0041 3MB0016 3MA0019 3MA0045 3MA0001 3MB0084 3MB0309 3MB0349 3MA0122 3MA0121 3MA0120 3MA0107 3MA0162 3MA0196 3MA0161 3MA0108 3MA0126 3MA0177 3MB0083 3MA0090 3MA0938 3MA0016
Description RETAINING RING BEARING - 2 SHIELDS REAR ENDPLATE CYLINDER ASSEMBLY O-RING ROTOR VANE WOODRUFF KEY FRONT ENDPLATE BEARING - 2 SHIELDS O-RING LOCK RING 3 x 3/32 in ORBIT SHAFT BALANCER 3 x 3/16 in. ORBIT SHAFT BALANCER 3 in. x 5/16 in. ORBIT SHAFT BALANCER FILTER CHECK VALVE VALVE RETAINER RETAINING RING BEARING - NO SEAL/SHIELDS SPACER BEARING - 1 SEAL SHIM 0.2 THK BELLEVILLE WASHER RETAINING RING SPINDLE RETAINING RING BEARING - 1 SEAL SPACER 0.2 THK
3M™ Power Tool System Product Catalogue
Fig. # 29 30 31 32 32 32 33 34 34 34 35 36 37 38 39 40 41 42 43 44
3M Part No. 3MA0017 3MA0018 3MB0312 3MA1351 3MA1352 3MA1447 3MA0031 3MB0320 3MB0321 3MB0322 3MA0015 3MA1332 3MA0008 3MA0043 3MB0014 3MA0039 3MA1334 3MA1335 3MA1230 3MA1776
45
NA
46 47 48 49 50 51 52 53
3MA0062 3MA0068 3MA0166 3MA0009 3MA0007 3MA0014 3MA0013 3MA0044
Description BELLEVILLE WASHER RETAINING RING SPINDLE LEVER FOR 2.5 mm (3/32 in) ORBIT LEVER FOR 5 mm (3/16 in) ORBIT LEVER FOR 8 mm (5/16 in) ORBIT LEVER SPRING PIN GRIP 2.5 in. GRIP 2 3/4 in. GRIP 3 in. VALVE SLEEVE HOUSING VALVE STEM ASSEMBLY O-RING SPEED CONTROL INTERNAL RETAINING RING 3 in. ROS NON-VAC SHROUD 3 in. ROS SKIRT - 2.5 mm (3/32 in) ORBIT 3 in. SKIRT - 5 mm (3/16 in.) & 8 mm (5/16 in.) ORBIT 17 mm WRENCH 1 BACK-UP PAD SUPPLIED WITH EACH TOOL (TYPE DETERMINED BY MODEL) INTERNAL MUFFLER MUFFLER INSERT MUFFLER HOUSING VALVE SEAT VALVE VALVE SPRING INLET BUSHING ASSEMBLY O-RING
Fig. # 3M Part No. Description 54 3MA0006 SGV RETAINER ASSEMBLY FOR 1 in./28 mm HOSE SGV SWIVEL 55 3MA1338 EXHAUST FITTING 56 3MA0778 1 in./28 mm HOSE SEAL 57 3MA1354 TAG W/ INSTRUCTION FOR 1 in./28 mm HOSE SEAL TAG W/ INSTRUCTION FOR 3/4 in./19 mm HOSE 3MA1355 SEAL ASSEMBLY FOR 3/4 in./19 mm HOSE SGV SWIVEL 58 3MA1340 EXHAUST FITTING 59 3MA0854 3/4 in./19 mm HOSE SEAL ASSY FOR Ø 1 in. VAC HOSE TO Ø 1 in./28 mm x 60 3MA1490 1 1/2 in. FRICTION FIT ADAPTER COUPLING AND AIRLINE ASSY FOR Ø 1 in. VAC HOSE TO DOUBLE BAG 61 3MA1488 FITTING AND AIRLINE 62 3MA1333 SGV SKIRT/SHROUD ADAPTER ASSEMBLY FOR ROS CV 1 in./28 mm SWIVEL 63 3MA1343 EXHAUST 64 3MA0048 FLANGED NUT 65 3MA1345 ASSEMBLY FOR ROS CV 3/4 in. SWIVEL EXHAUST 66 3MA0047 WASHER 67 3MA0769 SCREW 68 3MA1434 VACUUM BAG 69 3MC0109 VACUUM BAG INSERT 3M™ CLEAN SANDING FILTER BAG 70 3MA1668 (20452-3M reorder number) 3M™ FILTER BAG ADAPTOR 71 3MA1669 (20453-3M reorder number)
Spare Parts : 2 Hand Random Orbital Sander 28 29 30
1 2 3
27
26
25
47 45
5 35
4 34
36
37 38
6 7
41
33
32
39
46
40 44 43
61
42 51 60
8
31
9 59
10 11 50
12
51 52
13
56
57
58
TO VACUUM FOR CENTRAL VACUUM SYSTEM
52 51
14 15 16
17 18
51 53 54 55
70
67
25
69
48 49
19 20 21 22
68 66 23
65
24 ITEM NO. TORQUE SETTINGS in.-lbs (N-m) 12 55 - 65 (6.2 - 7.3) 44 21 - 30 (2.4 - 3.4) 51 27 - 30 (3.0 - 3.4) 52 29 - 33 (3.3 - 3.7) 61 60 - 72 (6.8 - 8.1)
64
62 63
IT 1 2 3 4 5 6 7 8 9 10 11 12
P/N X PA 0040 X PA0021 X PB 00 17 X PA0441 X PA0042 X PB0118 X PA 044 5 X PA0041 X P B 0 0 16 XPA0019 XPA0045 X PA0 001
13
XPB0187
13
XPB0188
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 30 31 32
X P A0 122 X P A 0 1 21 XP A012 0 X P A0 090 XPA0751 X P A 17 6 7 XP A 10 2 4 XPB0208 X PA 1025 X PA 1777 NA X P A 1 95 5 X PB 0389 X P A0 032 XPA1218 X P B 0 2 90 XPA2075 XPA2076 X P A 19 54 X PA1 865
33
XPB0356
DESCRIPTION EXTERNAL RETAINING RING 10 X 26 X 8 BEARING - 2 SHIELDS R EAR EN DP LA TE Ø 50.0 mm X 36.0 mm CYLINDER ASSEMBLY 5 mm x 2.0 mm O-RING Ø 50.0 mm x 36 mm MOTOR MACHINED ROTOR VANE FOR Ø 50.0 mm x 36.0 mm MOTOR 3 mm x 13 mm WOODRUFF KEY FRONT ENDPLATE 12 X 28 X 8 BEARING - 2 SHIELDS 39.4 mm x 3.1 mm O-RING LOCK RING TwoHAND 150 x 5.0 mm (6 x 3/16 in.) ORBIT ROS AirSHIELD™ SHAFT BALANCER TwoHAND 150 X 10 mm (6 x 3/8 in.) ORBIT ROS AirSHIELD™ SHAFT BALANCER FILTER DUCKBILL CHECK VALVE VALVE RETAINER 11.9 mm (15/32 in.) RETAINING RING 12 x 32 x 15.9 DOUBLE ROW ANGULAR CONTACT BEARING - 1 SEAL SPACER 12.1 ID x 22.0 OD x 0.2 THK BELLEVILLE WASHER SPINDLE RETAINING RING 2 4 m m P A D W R E N C H F O R 3 M - PM S 4 8 5 R E D 1 Pad Supplied With Each Tool (Type Determined By Model) M 8 T H R E AD E D P L U G - P M S 48 5 R E D 36.0 mm RH 3M VACUUM HOUSING MUFFLER INSERT (NV & CV Machines) TOP HOUSING SEAL (NV & CV Machines) 36.0 mm MOTOR HOUSING SEAL 3M ROS 12,000 RPM 5.0 mm (3/16 in.) ORBIT THROTTLE LEVER - TwoHAND 3M ROS 12,000 RPM 10.0 mm (3/8 in.) ORBIT THROTTLE LEVER - TwoHAND Tw oH AN D H A N GE R - P MS 48 5C SPACER RING 36.0 mm DIE-CAST MACHINE MOTOR HOUSING W/SIDE HANDLE MOUNTING STUDS
IT 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
P/N X P A 00 04 XP A065 5 XPA0015 XPA0009 XP A0 0 0 7 XPA0014 X PA 07 30 XPA 0500 X P B0 181 X P B0 182 X P A 0 664 X P A 0 5 16 XPA0517 X P A0511 X P A2121 xpa1960 X P C 02 10 X PA 1398 XP A1430 X PA 004 3 XPa1953 X PA 0039 X P A0510 X P A0509 X P A 0 6 28 X PA0 776 XPA1965 X PA 0 0 1 3 X PA 0 6 2 3 XPA1669 X PA1 668 XPA1485 XPA1782 XPB0092 XPB0123 XPC0109 XPA1434
DESCRIPTION CYLINDER SPRING PIN V ALV E STE M ASS EMBL Y VALVE SLEEVE V A L V E S E AT V AL V E VALVE SPRING AIRLINE SEAL ASSEMBLY E XHA US T GASKE T 36.0 mm MOTOR SGV EXHAUST NOZZLE NV/CV EXHAUST NOZZLE M4 X 8 H E X SO C K E T B U TTO N H E AD CA P S C R E W TUBING CLAMP (NV & CV Machines) EXHAUST TUBING (NV & CV Machines) INLET TUBING TwoHAND 6" MULTI-HOLE SHROUD - PMS 485 RED 3M SIDE HANDLE 36.0 mm LH GREY HOUSING W/SIDE HANDLE HOLE SCREW, BUTTON HEAD TORX M4.0 X 15 mm BLACK SCREW, BUTTON HEAD TORX M4.0 X 30 mm BLACK 9 mm x 1.5 mm O-RING T woHA N D SPEE D CON TROL - P MS 485 RE D INTERNAL RETAINING RING INLET CAPTIVE RING 7.6 mm x 1.78 mm O-RING O-RING (NV & CV Machines) MUFFLER (NV & CV Machines) INLET/EXHAUST END CAP ASSEMBLY FOR SGV AND CV MACHINES 1/4-18 NPT INLET BUSHING ASSEMBLY 1 in. (28 mm) HOSE SEAL-TwoHAND™ (SGV Machines) 3M™ FILTER BAG ADAPTOR, 1in EXT HOSE THREAD X 1in OD 3M™ CLEAN SANDING FILTER BAG (5X12in) Ø 1 in. x 6 ft. VACUUM HOSE - PMS 485 C RED Ø 3/8 in x 4 ft AIR LINE WITH Ø 1/4 in COMPRESSION FITTINGS HOSE END ADAPTER - 1 in./28 mm HOSE THREAD X 1 1/2 in. O.D. 1 in. DOUBLE BAG VACUUM FITTING VACUUM BAG INSERT VACUUM BAG FOR 3M
3M™ Power Tool System Product Catalogue
37
Spare Parts : Orbital Sander 75 x 100mm 46
27
48
47
28
56
1 2 5
3 4
50
29
53
31 6
7
51
55
52
49
61
30
32
54
59 58
33
8
60
57
9
35
34
10
36 69
37
11
38
39
12
70 62
13 14 16
15
19
20
21
22
23
24
25
IT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 29 29 30 31 32 33 34 35 36
38
P/N 3MA0040 3MA0021 3MB0017 3MA0005 3MA0042 3MB0005 3MA0010 3MA0041 3MB0016 3MA0019 3MA0045 3MA0001 3MB0102 3MA0122 3MA0121 3MA0120 3MA0107 3MA0162 3MA0196 3MA0161 3MA0108 3MA0126 3MA0177 3MA0163 3MA0080 3MA0079 3MA1353 3MA0031 3MB0320 3MB0321 3MB0322 3MA0015 3MA0768 3MA0076 3MA1331 3MA1356 3MA0008 3MA0043
41
TO VACUUM SYSTEM FOR CENTRALVAC
63
TO INLET
43
42
26
12 31 40 42 43 48 52 56 68
TO INLET
17
18
ITEM
40
TORQUESETTING Nm (in.-lbs.) 6.2 - 7.3 (55 - 65) 2.2 - 2.8 (20 - 25) 2.8 - 3.4 (25 - 30) 2.8 - 3.4 (25 - 30) 10.7 - 11.8 (95 - 105) 1.8 - 2.3 (16 - 20) 6.8 - 8.1 (60 -72) 4.0 - 5.4 (36 - 48) 3.4 - 3.9 (30 - 35)
DESCRIPTION EXTERNAL RETAINING RING BEARING - 2 SHIELDS REAR ENDPLATE CYLINDER ASSEMBLY O-RING ROTOR VANE WOODRUFF KEY FRONT ENDPLATE BEARING - 2 SHIELDS O-RING LOCK RING SHAFT BALANCER FILTER CHECK VALVE VALVE RETAINER RETAINING RING BEARING - NO SEAL/SHIELDS SPACER BEARING - 1 SEAL SHIM 0.2 THK BELLEVILLE WASHER RETAINING RING SPINDLE ASSEMBLY SPACER 0.4 THK SPACER 0.2 THK LEVER LEVER SPRING PIN GRIP 2.5 in. GRIP 2 3/4 in. GRIP 3 in. VALVE SLEEVE SCREW WASHER HOUSING SHROUD SEAL VALVE STEM ASSEMBLY O-RING
3M™ Power Tool System Product Catalogue
45
64 65
66
44 67 68
71 72
IT P/N DESCRIPTION 37 3MB0014 SPEED CONTROL 38 3MA0039 INTERNAL RETAINING RING 39 3MC0018 MINI PAD SUPPORT ASSEMBLY 40 3MA0766 SCREW 41 3MA1357 PAD BACKING FOR SCREW-ON PADS 42 3MA0767 SCREW 43 3MA0078 SCREW 44 NA 1 PAD SUPPLIED WITH EACH TOOL (TYPE DETERMINED BY MODEL) 45 3MA0864 2.5 mm HEX WRENCH 46 3MA0032 MUFFLER INSERT 47 3MA0038 MUFFLER PLATE 48 3MA0166 MUFFLER HOUSING 49 3MA0009 VALVE SEAT 50 3MA0007 VALVE 51 3MA0014 VALVE SPRING 52 3MA0013 INLET BUSHING ASSEMBLY 53 3MA1349 SNAP-IN VACUUM COVER PLATE 54 3MA1350 SNAP-IN EXHAUST ADAPTER 55 3MA0044 O-RING 56 3MA0722 SGV RETAINER 57 3MA1338 ASSEMBLY FOR 1 in./28 mm HOSE SGV SWIVEL EXHAUST FITTING 58 3MA1340 ASSEMBLY FOR 3/4 in./19 mm HOSE SGV SWIVEL EXHAUST FITTING 59 3MA0778 1 in./28 mm HOSE SEAL 60 3MA0854 3/4 in./19 mm HOSE SEAL 61 3MA1354 TAG W/ INSTRUCTION 1 in./28 mm HOSE SEAL 61 3MA1355 TAG W/ INSTRUCTION 3/4 in./19 mm HOSE SEAL 62 3MA1488 ASSY FOR Ø 1 in. VAC HOSE TO DOUBLE BAG FITTING AND AIRLINE 62 3MA1487 ASSY FOR Ø 3/4 in. VAC HOSE TO DOUBLE BAG FITTING AND AIRLINE 63 3MA1490 ASSY FOR Ø 1 in. VAC HOSE TO Ø 1 in./28 mm x 1 1/2 in. FRICTION FIT ADAPTER COUPLING AND AIRLINE 63 3MA1489 ASSY FOR Ø 3/4 in. VAC HOSE TO Ø 3/4 in. x 1 in./28 mm ADAPTER COUPLING AND AIRLINE 64 3MA0048 FLANGED NUT 65 3MA1359 ASSEMBLY FOR 3/4 in. OS CV SWIVEL EXHAUST 66 3MA1360 ASSEMBLY FOR 1 in./28 mm OS CV SWIVEL EXHAUST 67 3MA0047 WASHER 68 3MA0769 SCREW 69 3MA1434 VACUUM BAG 70 3MC0109 VACUUM BAG INSERT 71 3MA1668 3M™ CLEAN SANDING FILTER BAG (20452-3M reorder number) 72 3MA1669 3M™ FILTER BAG ADAPTOR (20453-3M reorder number)
Spare Parts : File Belt Sander 2
3
1
26
27
4 5
7
6
8 9 10
17
11
18
19
20
21
22
23
24
25
32
12 13
31 14
30
15
29 28 53
54
55
56
16 40
33
41
42
5
43 44
34 35
36
45
46
47
48
37 38
49
50
51
52
39
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
P/N XPC0334 XPA0512 XPB0458 XPA2203 XPA2202 XPA2389 XPA2045 XPA2039 * XPA2087 XPA2031 XPB0464 XPA2036 XPA2038 XPA0767 XPA2046 XPA2208 XPA2033 XPA0021 XPA0929 XPA0923 XPA0921 XPA2134 XPB0461 XPB0258 XPA0922 XPA2133 XPA0925 XPC0369 XPA2009
DESCRIPTION HOUSING - LEFT M4 x 25 SOCKET BUTTON HEAD CAP SCREW MOTOR CASE O-RING, 31.0mm ID x 1.5mm WIDTH O-RING, 8.0mm ID x 1.0mm WIDTH HOUSING - RIGHT TRACKING / CONTROL KNOB SCREW, SHCS M3 X 4, STEEL 3M™ FILE BELT ARM STANDARD STYLE SPRING, TRACKING BIAS TRACKING ARM MOUNT SPRING - BELT TENSION TRACKING ARM POST FLAT HEAD SCREW M4 x 10 DUST COVER BELT COVER AND LATCH ASSEMBLY DRIVE STUD ADAPTOR 10 X 26 X 8 BEARING - 2 SHIELDS SHIM - 25.4 OD X 19 ID X 0.02 THK SHIM - 25.4 OD X 19 ID X 0.05 THK SPACER - 13.4 OD X 10.01 ID X 3.2 THK ENDPLATE ASSY - FRONT CYLINDER ROTOR ROTOR VANE ENDPLATE ASSY - REAR 6 x 19 x 6 BEARING - 2 SHIELDS BELT HOUSING DRIVE PULLEY
ITEM 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
P/N XPB0463 XPA2323 XPA2034 XPB0436 XPA2019 XPC0333 XPC0206 XPA2199 XPA2026 XPA0098 XPA2020 XPA2027 XPA2228 XPA0043 XPA2321 XPA2320 XPA0014 XPA2207 XPA2023 XPA2407 XPA2206 XPA2201 XPA2209 XPA2211 XPB0517 XPA2329 XPA2417
DESCRIPTION FRONT EXHAUST MANIFOLD DIFFUSER MOTOR SPACER AIR GUIDE GASKET, AIR GUIDE HANDLE GRIP HANDLE RETAINING RING, 7/16 VALVE STEM 4 mm x 1.0 mm O-RING SAFETY LEVER ASSEMBLY SET SPRING PIN SPEED CONTROL 9 mm x 1.5 mm O-RING VALVE SEAT VALVE VALVE SPRING RETAINING RING, 5/8 DIFFUSER EXHAUST CAP WITH LABELS O-RING, 15.6mm ID X 1.78mm WIDTH WASHER, AIR INLET INLET BUSHING ASSEMBLY DRIVE PULLEY - RUBBER WRENCH - DRIVE WHEEL WRENCH, 2.5MM L-KEY WRENCH, 4.0MM L-KEY
3M™ Power Tool System Product Catalogue
39
Spare Parts : Disc Sander 50mm
Fig. # 3M Part Number 1 06582 2 06583 3 06528 3 06529 3 06530 3 06540 3 06541 4 06516 5 06633 6 06581 7 06611 8 06645 9 06505 10 06580 11 06523 12 06636 13 06619 14 06611 15 06629 16 06624 17 06634
40
3M™ Power Tool System Product Catalogue
Description Sander Adapter Collet Body Collet (1/4˝) Collet (1/8˝) Collet (3/16˝) Collet (3mm) Collet (6mm) Collet Nut Lock Nut Output Shaft Ball Bearing Bevel Gear Set Needle Bearing Angle Head Assembly (Includes Figures 9 & 11) Grease Fitting Clamp Nut Retaining Ring Ball Bearing Front End Plate Front End Plate Spacer Rotor
Fig. # 3M Part Number 18 06647 19 06631 20 06630 21 06612 22 06625 23 06626 24 06614 25 06620 26 06627 27 06613 28 06622 29 06616 30 06599 31 06635 32 06617 33 06632 34 06615 35 06621 36 06628 37 06618 38 06586
Description Vane, Set of 5 Cylinder Liner Rear End Plate Ball Bearing Housing Trigger Valve Stem Compression Spring O-Ring Air Regulator Compression Spring Steel Ball Pin Housing Cover, .5 HP Paddle Assembly Roll Pin Muffler Material Disc Spring O-Ring Exhaust Deflector Inlet Bushing 7/16˝ x 11/16˝ Wrench (2)
Spare Parts : Disc Sander 75mm
Fig. # 3M Part Number
Description
Fig. # 3M Part Number
Description
1
06582
Sander Adapter
22
06527
Wave Washer .440˝ x .618˝ x .008˝
2
06583
Collet Body
23
06508
Ball Bearing
3
06528
Collet (1/4˝)
24
06567
Washer .251˝ x .468˝ x .063˝
3
06529
Collet (1/8˝)
25
06568
Screw #8-32 x 3/8˝ But Hd Cap
3
06530
Collet (3/16˝)
26
06638
Housing
3
06540
Collet (3mm)
27
06558
Torr Pin, 3/16˝ x 7/8˝
3
06541
Collet (6mm)
28
06543
O-Ring
4
06516
Collet Nut
29
06511
O-Ring
5
06578
Bearing Retainer
30
06556
Regulator
6
06591
Output Shaft
31
06501
Screw, 6-32 x 3/4˝ Set Soc Hex
7
06507
Ball Bearing
32
06598
Housing Cover
8
06646
Spiral Bevel Gear Set
33
06642
Lever
9
06505
Needle Bearing
34
06559
Groove Pin, 1/8˝ x 7/8˝ Type E
10
06637
Angle Head Assembly (Includes Figures 9 & 11)
35
06566
Warning Label
11
06523
Grease Fitting
36
06557
Muffler
12
06653
Angle Head Clamp Nut
37
06552
Throttle Valve Seat
13
06655
Lock Ring
38
06553
Throttle Valve
14
06520
Pin, 1/8˝ x 1/4˝
39
06554
Taper Spring
15
06609
O-Ring
40
06555
Screen
16
06510
Ball Bearing 3/8˝ x 7/8˝ x 9/32˝
41
06608
O-Ring, 1/16˝ x 5/8˝ x 3/4˝
17
06639
Front End Plate
42
06604
Rotatable Exhaust Deflector
18
06562
Rotor
43
06605
Inlet Bushing
19
06643
Vane, Set of 5
44
06586
7/16˝ x 11/16˝ Wrench (2)
20
06563
Cylinder
21
06560
Rear End Plate
3M™ Power Tool System Product Catalogue
41
Spare Parts : Die Grinder 20,000 RPM and 18,000 RPM
42
3M™ Power Tool System Product Catalogue
Fig. # 3M Part Number
Description
Fig. # 3M Part Number
Description
1
06572
Collet Nut
17
06638
Housing
2
06545
Collet (3/8˝)
18
06558
Torr Pin, 3/16˝ x 7/8˝
2
06546
Collet (8mm)
19
06543
O-Ring
2
06573
Collet (1/8˝)
20
06511
O-Ring
2
06574
Collet (3/16˝)
21
06556
Regulator
2
06575
Collet (1/4˝)
22
06501
Screw, 6-32 x 3/4˝ Set Soc Hex
2
06576
Collet (3mm)
23
06598
Housing Cover
2
06577
Collet (6mm)
24
06642
Lever
3
06571
Collet Body
25
06559
Groove Pin, 1/8˝ x 7/8˝ Type E
4
06565
Retainer
26
06566
Warning Label
5
06579
O-Ring 7/8˝ x 1/4˝ x 3/16˝
27
06557
Muffler
6
06609
O-Ring
28
06552
Throttle Valve Seat
7
06510
Ball Bearing 3/8˝ x 7/8˝ x 9/32˝
29
06553
Throttle Valve
8
06639
Front End Plate
30
06554
Taper Spring
9
06561
Rotor
31
06555
Screen
10
06643
Vane, Set of 5
32
06608
O-Ring, 1/16˝ x 5/8˝ x 3/4˝
11
06601
Cylinder (20,000 RPM)
33
06604
Rotatable Exhaust Deflector
11
06564
Cylinder (18,000
34
06605
Inlet Bushing
12
06560
Rear End Plate
35
06569
9/16˝ x 3/4˝ Wrench (2)
13
06527
Wave Washer .440˝ x .618˝ x .008˝
14
06508
Ball Bearing
15
06567
Washer .251˝ x .468˝ x .063˝
16
06568
Screw #8-32 x 3/8˝ But Hd Cap
Spare Parts : Die Grinder 12,000 RPM and 8,000 RPM
Fig. # 3M Part Number
Description
Fig. # 3M Part Number
Description
1
06572
Collet Nut
18
06560
Rear End Plate
2
06545
Collet (3/8˝ )
19
06508
Ball Bearing
2
06546
Collet (8mm)
20
06638
Housing
2
06573
Collet (1/8˝ )
21
06558
Torr Pin, 3/16˝ x 7/8˝
2
06574
Collet (3/16˝ )
22
06543
O-Ring
2
06575
Collet (1/4˝ )
23
06511
O-Ring
2
06576
Collet (3mm)
24
06556
Regulator
2
06577
Collet (6mm)
25
06501
Screw, 6-32 x 3/4˝ Set Soc Hex
3
06571
Collet Body
26
06598
Housing Cover
4
06518
Retaining Ring
27
06642
Lever
5
06507
Ball Bearing
28
06559
Groove Pin, 1/8˝ x 7/8˝ Type E
6
06587
12,000 RPM Grinder Output Shaft
29
06566
Warning Label
6
06592
8,000 RPM Grinder Output Shaft
30
06557
Muffler
7
06521
Wave Washer
31
06552
Throttle Valve Seat
8
06588
12,000 RPM Grinder Gear Box
32
06553
Throttle Valve
8
06593
8,000 RPM Grinder Gear Box
33
06554
Taper Spring
9
06653
Angle Head Clamp Nut
34
06555
Screen
10
06655
Lock Ring
35
06608
O-Ring, 1/16˝ x 5/8˝ x 3/4˝
11
06520
Pin, 1/8˝ x 1/4˝
36
06604
Rotatable Exhaust Deflector
12
06609
O-Ring
37
06605
Inlet Bushing
13
06506
Ball Bearing 3/8˝ x 7/8˝ x 9/32˝
38
06569
9/16˝ x 3/4˝ Wrench (2)
14
06603
Front End Plate
15
06640
Rotor
16
06643
Vane, Set of 5
17
06602
Cylinder (12,000 RPM)
17
06600
Cylinder (8,000 RPM)
3M™ Power Tool System Product Catalogue
43
Spare Parts : Cut-off Wheel Tool 75mm and 100mm
Fig. # 3M Part Number 1 06570 1 06594 4˝ 2 06585 3 06584 4 06565 5 06579 6 06609 7 06510 8 06639 9 06561 10 06643 11 06563 11 06601 12 06560 13 06527 14 06508 15 06567 16 06568 17 06638 18 06558 19 06543 20 06511
44
3M™ Power Tool System Product Catalogue
Description 3˝ Cut-off Wheel Guard Cut-off Wheel Guard Wheel Retainer Wheel Arbor Retainer O-Ring 7/8˝ x 1/4˝ x 3/16˝ O-Ring Ball Bearing 3/8˝ X 7/8˝ X 9/32˝ Front End Plate Rotor Vane, Set of 5 Cylinder (25,000 RPM) Cylinder (20,000 RPM) Rear End Plate Wave Washer .440˝ X .618˝ X .008˝ Ball Bearing Washer .251˝ X .468˝ X .063˝ Screw #8-32 X 3/8˝ But Hd Cap Housing Torr Pin, 3/16˝ X 7/8˝ O-Ring O-Ring
Fig. # 3M Part Number 21 06556 22 06501 23 06598 24 06642 25 06559 26 06566 27 06557 28 06552 29 06553 30 06554 31 06555 32 06608 33 06604 34 06605 34 06607 35 06522 36 06610
Description Regulator Screw, 6-32 X 3/4˝ Set Soc Hex Housing Cover Lever Groove Pin, 1/8˝ X 7/8˝ Type E Warning Label Muffler Throttle Valve Seat Throttle Valve Taper Spring Screen O-Ring, 1/16˝ X 5/8˝ X 3/4˝ Rotatable Exhaust Defl ector Inlet Bushing Inlet Bushing, 3/8˝ NPT (4˝ ) 7/8˝ Wrench 3/16˝ Hex Wrench
Spare Parts : Cut-off Wheel Tool 115mm and 125mm
Fig. # 3M Part Number 1 06597 1 06595 1 06596 2 06590 3 06589 4 06651 5 06648 6 06644 7 06504 8 06542 9 06550 10 06649 11 06654 12 06503 13 06526 14 06523 15 06650 16 06652 17 06653 18 06520 19 06655 20 06609 21 06510 22 06639 23 06562 24 06643 25 06563 25 06601
Description 4½˝ Cut-off Guard 5˝ Cut-off Guard 6˝ Cut-off Guard Wheel Retainer Wheel Arbor Output Spindle Gear Spacer and Ball Bearing Spriral Bevel Gear Set Elastic Stop Nut 9/16˝ -18 Ball Bearing Wave Washer HD Angle Head Hex Head Plug Bolt (2) Jam Nut Handle Grease Fitting Angle Head Cap Angle Head Spacer Angle Head Clamp Nut Pin, 1/8˝ x 1/4˝ Lock Ring O-Ring Ball Bearing 3/8˝ X 7/8˝ X 9/32˝ Front End Plate Rotor Vane, Set of 5 Cylinder (12,000 RPM) Cylinder (10,000 RPM)
Fig. # 3M Part Number 26 06560 27 06527 28 06508 29 06567 30 06568 31 06638 32 06558 33 06543 34 06511 35 06556 36 06501 37 06598 38 06642 39 06559 40 06566 41 06557 42 06552 43 06553 44 06554 45 06555 46 06608 47 06604 48 06607 49 06524 50 06544
Description Rear End Plate Wave Washer .440˝ X .618˝ X .008˝ Ball Bearing Washer .251˝ X .468˝ X .063˝ Screw #8-32 X 3/8˝ But Hd Cap Housing Torr Pin, 3/16˝ X 7/8˝ O-Ring O-Ring Regulator Screw, 6-32 X 3/4˝ Set Soc Hex Housing Cover Lever Groove Pin, 1/8˝ X 7/8˝ Type E Warning Label Muffler Throttle Valve Seat Throttle Valve Taper Spring Screen O-Ring, 1/16˝ X 5/8˝ X 3/4˝ Rotatable Exhaust Defl ector Inlet Bushing, 3/8˝ NPT (4˝ ) 5/8˝ Wrench Adjustable Spanner Wrench
3M™ Power Tool System Product Catalogue
45
Spare Parts : Inline Sander 1,600 RPM
Fig. # 3M Part Number 1 30380 2 30381 3 06503 4 06526 5 30377 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
06523 30378 30367 30375 30370 30366 30431 30379 30390 30428 30370 30366 30431 30429 30432 30427 06506 30433 06640
Description Support Handle Ring Screw, 3/8-16 Jam Nut Handle Double Reduction Sander Gear Case (Includes Figure 6) Grease Fitting Bearing Retainer Ball Bearing (2) Output Spindle Pin (3) Needle Bearing (3) Planet Gear Spacer Ball Bearing Cantilevered Gear Carrier Pin (3) Needle Bearing (3) Planet Gear Gear Case (Includes Figure 6) Pinion Gear Wear Plate Ball Bearing 3/8˝ x 7/8˝ x 9/32˝ Front End Plate Rotor
Fig. # 3M Part Number 25 06643 26 06563 27 06560 28 06508 29 30369 30 06638 31 06558 32 06543 33 06511 34 06556 35 06501 36 06598 37 06642 38 06559 39 06566 40 06557 41 06552 42 06553 43 06554 44 06555 45 06608 46 06604 47 06605 48 30437
Description
Fig. # 3M Part Number 21 30369 22 06638 23 06558 24 06543 25 06511 26 06556 27 06501 28 06598 29 06642 30 06559 31 06566 32 06557 33 06552 34 06553 35 06554 36 06555 37 06608 38 06604 39 06605 40 30437
Description
Vane, Set of 5 Cylinder Rear End Plate Ball Bearing Retaining Ring Housing Torr Pin, 3/16˝ x 7/8˝ O-Ring O-Ring Regulator Screw, 6-32 x 3/4˝ Set Soc Hex Housing Cover Lever Groove Pin, 1/8˝ x 7/8˝ Type E Warning Label Muffler Throttle Valve Seat Throttle Valve Taper Spring Screen O-Ring, 1/16˝ x 5/8˝ x 3/4˝ Rotatable Exhaust Deflector Inlet Bushing Wrench
Spare Parts : Inline Sander 3,500 RPM
Fig. # 3M Part Number 1 30380 2 30381 3 06503 4 06526 5 30378 6 30367 7 30376 8 9 10 11 12 13 14 15 16 17 18 19 20
46
3M™ Power Tool System Product Catalogue
06523 30375 30426 30388 30430 30427 06506 30433 06640 06643 06563 06560 06508
Description Support Handle Ring Screw, 3/8-16 Jam Nut Handle Bearing Retainer Ball Bearing (2) Single Reduction Sander Gear Case (Includes Figure 8) Grease Fitting Output Spindle Pin (3) Needle Bearing (3) Planet Gear Wear Plate Ball Bearing 3/8˝ x 7/8˝ x 9/32˝ Front End Plate Rotor Vane, Set of 5 Cylinder Rear End Plate Ball Bearing
Retaining Ring Housing Torr Pin, 3/16˝ x 7/8˝ O-Ring O-Ring Regulator Screw, 6-32 x 3/4˝ Set Soc Hex Housing Cover Lever Groove Pin, 1/8˝ x 7/8˝ Type E Warning Label Muffler Throttle Valve Seat Throttle Valve Taper Spring Screen O-Ring, 1/16˝ x 5/8˝ x 3/4˝ Rotatable Exhaust Deflector Inlet Bushing Wrench
Spare Parts : Random Orbital Buffer 1 2
59
58
60
57 51
4
50
49
3 5
56
48
6
53
54
55
52
7 8 9 31 30
11 27
12
15
18 19
16
28
38
26
14
17
39
40
41
42
43
44
45
ITEM NO. TORQUE SETTINGS in.-lbs (N-m) 12 55 - 65 (6.2 - 7.3) 40 21 - 30 (2.4 - 3.4) 47 20 - 25 (2.2 - 2.8) 59 27 - 30 (3.0 - 3.4) 60 60 - 72 (6.8 - 8.1)
34 35 28
36
37
27
20
29
21 23 24
46
32
10
13
47
33
22
25 Fig. # 3M P/N
3M UPC Description P/N
Fig. # 3M P/N
3M UPC Description P/N
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
A0040 A0021 30327 A0042 30347 B0005 A0010 A0041 30326 A0019 A0045 30337 30361 A0122 A0121 A0120 A0090 A0938 A0016 A0017 B0312 A0146 A0018 20350
28113 28107 30327 28115 30347 28170 28099 28114 30326 28106 28118 30337 30361 28132 28131 28130 28127 28148 28103 28104 28183 28134 28105 20350
25
Various
Various
26 27 28 29 30
30331 30332 30328 30362 30359
30331 30332 30328 30362 30359
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
30300 28102 30338 28116 30348 28112 30334 30336 30357 30314 30344 28098 28096 28101 30315 30333 30308 30301 30364 30365 30342 30339 30346 30343 30360 30329 30306 30305 30321 28100
RETAINING RING BEARING 1 REAR ENDPLATE 1 O-RING 1 CYLINDER ASSEMBLY 1 ROTOR 1 VANE 5 WOODRUFF KEY 1 FRONT ENDPLATE 1 BEARING 1 O-RING 1 LOCK RING - 50mm THREAD 1 SHAFT BALANCER 1 FILTER 1 DUCKBILL CHECK VALVE 1 VALVE RETAINER 1 RETAINING RING 1 BEARING 1 SPACER 1 BELLEVILLE WASHER 1 SPINDLE 1 17mm PAD WRENCH 1 RETAINING RING 1 3M™ Hookit™ Clean Sanding Disc Pad- 3˝ x 1/2˝ x 1/4-20 Ext. 1 Finesse-it™ Foam Buffing Pad (3.25˝ or 3.75˝ Diameter) 1 HANGER 1 M8 THREADED PLUG 2 SPACER RING 2 SHROUD 1 MOTOR HOUSING 1
30300 A0015 30338 A0043 30348 A0039 30334 30336 30357 30314 30344 A0009 A0007 A0014 30315 30333 30308 30301 30364 30365 30342 30339 30346 30343 30360 30329 30306 30305 30321 A0013
SPRING PIN 1 VALVE SLEEVE 1 VALVE STEM ASSEMBLY 1 O-RING 1 FLUSH SPEED CONTROL 1 RETAINING RING 1 SIDE HANDLE OPT GASKET 1 MOTOR EXHAUST NOZZLE 1 SCREW 3 O-RING 1 VALVE SEAT 1 VALVE 1 VALVE SPRING 1 AIRLINE SEAL ASSEMBLY 1 INLET TUBING 1 SCREW 4 THREADED INSERT 4 HANDLE 1 GRIP 1 THROTTLE LEVER 1 MUFFLER 1 MUFFLER 1 O-RING 1 EXHAUST CAP 1 INLET/EXHAUST END CAP 1 INLET CAPTIVE RING 1 O-RING 1 SCREW 2 1/4-18 NPT INLET BUSHING ASSEMBLY 1
3M™ Power Tool System Product Catalogue
47
Spare Parts : Nib Removal Sander
Fig. # 3M Part Number 3 S3305 4 S3322 5 S3323 6 P101 8 S3401 9 S3402 10 696ZZ 11 S3326 12 S3411 13 S3333 14 60743 15 S3329 16 S3212 17 S3424 18 608ZZ 19 S3217 20 S3215 21 S3119 22 S3118 23 696ZZ 24 S3336 25 608ZZ 26 S3338 28 S3340
48
3M™ Power Tool System Product Catalogue
Description Spring Air Regulator O-Ring (P-7) O-Ring (P-10A) Throttle Lever Roll Pin Bearing (696ZZ) Rear End Plate Roll Pin Rotor Collar Cylinder Rotor Rotor Blade Front End Plate Bearing (608ZZ) Pinion Cup Lock Cup Angle Housing Bearing (696ZZ) Gear Bearing (608ZZ) H/R Key (φ8x1.5) Clamp Nut
Fig. # 3M Part Number 30 S3321 32 60730 33 60731 34 171408 35 60737 36 686ZZ 37 60732 38 150406 39 60736 40 110310A 40-1 110310 40-2 2103 41 60739 42 60733A 43 130305 44 * 45 607381 60 60740 61 60741 62 60742
Description O-Ring (P-4) EX.Shaft Balancer Set Screw (M4x8) Snap Ring Bearing (686ZZ) Shoe Bearing Case Screw (M4x6) Skirt Band Screw Set Screw (M3x10) Nut (M3) Cap Skirt Screw (M3x5) Disc Pad Regulator (φ1.6) Housing Throttle Valve Valve Plug
Spare Parts : Mini Random Orbital Sander 39
17 20 1
21 18
2
22 23
3 5
24 25
4
6
7
26
19
27 28
8 9
29
38 10
11 30 12
31 32
13
ITEM 12 24 25
TORQUE SETTING Nm (in.-lbs.) 6.2 - 7.3 (55 - 65) 1.8 - 2.3 (16 - 20) 6.8 - 8.1 (60 - 72)
33 34 14 35 15 36 16 37 3M 1 1/4 PAD
Fig. # 3M Part Number 1 3MA0040 2 3MA0021 3 3MB0017 4 3MA0005 5 3MA0042 6 3MB0005 7 3MA0010 8 3MA0041 9 3MB0016 10 3MA0019 11 3MA0045 12 3MA0001 13 3MB0405 14 3MA0122 15 3MA0121 16 3MA0120 17 3MA1873 18 3MB0321 18 3MB0320 18 3MB0322 19 3MA1872 20 3MA0031
Description RETAINING RING BEARING - 2 SHIELDS REAR ENDPLATE CYLINDER ASSEMBLY O-RING ROTOR VANE WOODRUFF KEY FRONT ENDPLATE BEARING - 2 SHIELDS O-RING LOCK RING SHAFT BALANCER FILTER DUCKBILL CHECK VALVE VALVE RETAINER LEVER GRIP 2 3/4 in. GRIP 2 1/2 in GRIP 3 in. MINI HOUSING LEVER SPRING PIN
Fig. # 3M Part Number 21 3MA0015 22 3MA0013 23 3MA0014 24 3MA0007 25 3MA0009 26 3MA0008 27 3MA0043 28 3MA0380 29 3MA0039 30 3MA0107 31 3MA0149 32 3MA0199 33 3MA0150 34 3MA0108 35 3MA0109 36 3MA0119 37 3MB0406 38 3MB0442 39 3MA1991
Description VALVE SLEEVE INLET BUSHING ASSEMBLY VALVE SPRING VALVE VALVE SEAT VALVE STEM ASSEMBLY O-RING SPEED CONTROL RETAINING RING RETAINING RING BEARING - NO SEALS/SHIELDS SPACER 0.2 THK BEARING, 2 SEALS SHIM 0.2 THK BELLEVILLE WASHER RETAINING RING SPINDLE HANGER MUFFLER
3M™ Power Tool System Product Catalogue
49
Spare Parts : Electric Random Orbital Sander 110v and 240v
Fig. # 1 1 2 3 4 5 6 6 7 7 7 7 7 7 7 8 8 9 10 11 11 12 12 12 12 12
50
3M™ Power Tool System Product Catalogue
Description ROTOR 230V - 50 Hz ROTOR 110V - 50 Hz BEARING CRINKLE WASHER BEARING DIFFUSER STATOR 230V - 50 Hz STATOR 110V - 50 Hz MOTOR BODY -Part 1MOTOR BODY -Part 2MOTOR BODY -Part 3MOTOR BODY -Part 4MOTOR BODY -Part 5MOTOR BODY -Part 6MOTOR BODY -Part 7BRUSH -Part 1BRUSH -Part 2INDUCTANCE INDUCTANCE ELECTRONIC SPEED CONTROL 230V - 50 Hz ELECTRONIC SPEED CONTROL 110V - 50 Hz TOP COVER ASSEMBLY -Part 1TOP COVER ASSEMBLY -Part 2TOP COVER ASSEMBLY -Part 3TOP COVER ASSEMBLY -Part 4TOP COVER ASSEMBLY -Part 5-
Fig. # Description CORD PROTECTOR 13 MAIN SWITCH ASSEMBLY -Part 114 MAIN SWITCH ASSEMBLY -Part 214 MAIN SWITCH ASSEMBLY -Part 314 CORD DE - 230V 15 CORD GB - 230V 15 CORD GB - 110V 15 DUST BAG 16 ALUMINIUM FLANGE 17 BEARING 18 SEEGER 19 UPPER SCROLL 20 LOWER SCROLL 21 RUBBER SHROUD 22 M4x18 SCREW 23 COUNTERBALANCE FAN ORBIT 03 24 COUNTERBALANCE FAN ORBIT 05 24 PAD 25 SEAL 26 SUCTION HOSE 27 ALLEN WRENCH 28
Spare Parts : Electric Polisher 110v and 240v
Fig. # 1 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 5 5 6 7 8 9 10 10 10 10 10 10 11
Description SECONDARY GEAR REDUCTION ASSEMBLY -Part 1SECONDARY GEAR REDUCTION ASSEMBLY -Part 2SECONDARY GEAR REDUCTION ASSEMBLY -Part 3SECONDARY GEAR REDUCTION ASSEMBLY -Part 4SECONDARY GEAR REDUCTION ASSEMBLY -Part 5SECONDARY GEAR REDUCTION ASSEMBLY -Part 6SECONDARY GEAR REDUCTION ASSEMBLY -Part 7SPIRAL BEVEL CROWN GEAR ASSEMBLY -Part 1SPIRAL BEVEL CROWN GEAR ASSEMBLY -Part 2SPIRAL BEVEL CROWN GEAR ASSEMBLY -Part 3SPIRAL BEVEL CROWN GEAR ASSEMBLY -Part 4SPIRAL BEVEL CROWN GEAR ASSEMBLY -Part 5TOP COVER ASSEMBLY -Part 1 TOP COVER ASSEMBLY -Part 2 TOP COVER ASSEMBLY -Part 3 TOP COVER ASSEMBLY -Part 4 4,2x22 SCREW GEARBOX -Part 1GEARBOX -Part 2WASHER BEARING WASHER SHAFT PRELOAD SPRING ROTOR 110V - 50 Hz -Part 1ROTOR 110V - 50 Hz -Part 2ROTOR 110V - 50 Hz -Part 3ROTOR 230V - 50 Hz -Part 1ROTOR 230V - 50 Hz -Part 2ROTOR 230V - 50 Hz -Part 3WASHER
Fig. # 12 13 14 15 15 15 15 15 15 15 16 16 17 18 18 19 20 21 22 22 22 22 22 23 23 23 24
Description BEARING SIDE HANDLE DIFFUSER MOTOR BODY -Part 1MOTOR BODY -Part 2MOTOR BODY -Part 3MOTOR BODY -Part 4MOTOR BODY -Part 5MOTOR BODY -Part 6MOTOR BODY -Part 7STATOR 110V - 50 Hz STATOR 230V - 50 Hz BRUSH 230V ELEC. SPEED CONTROL 110V - 50 Hz ELEC. SPEED CONTROL 230V - 50 Hz CORD PROTECTOR MAIN SWITCH TRIGGER HANDLE -Part 1HANDLE -Part 2HANDLE -Part 3HANDLE -Part 4HANDLE -Part 5CORD DE - 230V CORD GB - 110V CORD GB - 230V LOCKING KEY
3M™ Power Tool System Product Catalogue
51
Spare Parts : Portable Dust Extraction Unit
Fig. # 01 03 04 05 06 08 09 10 10a 11 12 15 16 00 17 19 20 21 22 22 23 24 26 27 28 29 30 31 32 33 34 35
52
3M Part No 418148 535838 406107 535494 535395 535616 557113 543666 549248 535630 417714 578651 414775 403762 518220 557120 706429 535135 549064 406190 535166 417707 535470 565569 565514 640624 528595 535418 506104 536736 535500 516769
Description Lower Housing Motor Housing Bar Brigde Spring Noise Damping Electrode Rubber Ring Sealing Motor Protection Filter Motor Plug Sealing Motor Carbon Brush Upper Sealing Sleeve Spax-Screw Plate Lid (25 Litre) Lid (50 Litre) Handle Motor socket Pressure Piece Spring Sealing Vibrator Sheet Contact Lever Clamp Washer Contact Wire Cord-GB
3M™ Power Tool System Product Catalogue
Fig. # 36 37 37 38 38 39 40 41 41 43 44 45 46 48 49 51 51 51 51 52 53 54 55 56 57 58 62 63 64 65 66 67
3M Part No 531137 554037 549811 611426 611525 535524 415543 549637 553733 709420 538945 535531 547954 549262 535548 558707 558370 560281 560175 543697 415901 535333 543048 543055 543109 543031 535227 513485 548302 713663 549996 549828
Description Strain Relief Clamp Front Plate (M Class) Front Plate (L Class) Electronic (M Class) Electronic (L Class) Switch Axle Switch Clamp Turning Knob (M Class) Turning Knob (L Class) Locking Washer Lense Switch spring Socket-UK Under Pressure Hose Sealing Ring Rating Label (PN64409) Rating Label (PN64401) Rating Label (PN64405) Rating Label (PN64397) "M" Type Label Horn (M Class) Bolt Locking Knob Locking Piece Spring Support Diffuser (M Class) Support Locking Screw Washer Permanent Magnet Valve Body
Fig. # 3M Part No Description 68 547831 Hose Connenction 69 553962 Fitting Portable Dust Extraction Unit 25 Litre Tank 70 547671 Canister 70 551562 Canister 71 535173 Locking 72 535609 Axle 73 535241 Wheel 74 526829 Plug 75 541808 Steering Wheel 92 509037 Rotory Slide 93 406930 Canister Locking Portable Dust Extraction Unit 50 Litre Tank 74 526829 Plug 75 541808 Steering Wheel 80 552682 Canister 80 553191 Canister 81 535319 Locking 82 523545 Axle 83 559773 Wheel 83a 559827 Cover 84 522180 Lever 85 711102 Washer 86 706429 Spax-Screw 87 543437 Bow Handle 88 543468 spring Plug 92 509037 Rotory Slide 93 406930 Canister Locking
Terms & Conditions 1. Application 1.1 These conditions apply to all contracts between the Seller and the Buyer referred to in the order and override all conditions stipulated by the Buyer (even if submitted in a later document); any other agreements between the parties relating to the subject matter of this order are terminated (except an agreement into which these conditions are incorporated). 1.2 No variation of these conditions is permitted unless agreed in writing by a director of the Seller. 2. Price 2.1 The price to be paid for the goods or the services will be the Seller’s price at the date when the goods are despatched or the services are provided. 2.2 The price of goods includes the cost of Seller’s standard packaging and delivery within the UK and Ireland by Seller’s normal transportation; the price does not include VAT. 3.
Payment
3.1 Payment for the goods or services must be made within thirty days of the date of the invoice, unless otherwise specified on the invoice. 3.2 The Seller reserves the right to charge interest on overdue sums at the rate of 4% per annum above the Base Rate for the time being of Lloyds Bank plc calculated on a daily basis from the due date of payment in Clause 3.1 until the date upon which payment is made. 3.3 The Seller may at any time require the Buyer to make payment in advance of delivery or require security for payment. 3.4 If the Buyer fails to make payment by the due date or when required, the Seller may (without prejudice to any other remedy which it may have) cancel this contract and/or any other contract between the Buyer and the Seller and/or suspend delivery under this or any other contract until payment is made. 3.5 The Buyer will have no statutory or other right of set off. 4.
Delivery
4.1 Delivery dates are approximate only and the Seller shall not be responsible for any loss or damage arising from any delay in delivering all or part of any goods ordered or delay in the provision of any services. 4.2 Without prejudice to Clause 4.1, the Seller will not be liable for any delay in delivery or nondelivery of goods or services or any other breach of these conditions caused by any circumstances beyond the Seller’s control including without limitation, any Act of God, explosion, fire, flood, war, hostilities, accident, delay in delivery or nondelivery by the Seller’s suppliers, breakdowns or accidents to machinery, labour strike or dispute, order or decree of any court or action of any governmental authority, or any other causes or any circumstances beyond the Seller’s control; on the occurrence of any of the above events the Seller reserves the right to cancel or suspend the whole or part of any delivery.
4.3 In the case of any order for goods of a type or description not normally held in stock by the Seller, and therefore specially made ordered or imported by the Seller to meet such order, the Buyer will accept goods 10% more or 10% less than ordered, the total price of the order being correspondingly adjusted. 5.
Risk and Property
5.1 Goods supplied to the Buyer will remain the property of the Seller until full payment in cash or cleared funds has been received by the Seller for those goods and for all other goods delivered or services supplied by the Seller to the Buyer in respect of which payment is outstanding. 5.2 Until title to the goods passes to the Buyer: 5.2:1 The Buyer will hold those goods as the Seller’s bailee. 5.2:2 The Buyer will protect, store and identify the goods by reasonable means so that they can be recognised as the property of the Seller. 5.2:3 The Buyer may use the goods or sell them in the ordinary course of its business. 5.2:4 If the Buyer is in breach of any of its obligations to the Seller, or the order or the contract for the supply of goods is cancelled or capable of being cancelled under Clause 8 below, and provided the goods are still in existence and have not been resold, the Seller may (a) by notice to the Buyer require redelivery to it of the goods; and/or (b) with or without previous notice, retake possession of the goods and sell the goods. For the purpose of this clause the Buyer irrevocably authorises the Seller’s representatives to enter the premises on which the goods are situated and remove the goods at the Buyer’s expense. 5.3 Risk in all goods supplied to the Buyer will pass to the Buyer on delivery. 6.
Inspection
6.1 If the goods or any of them are damaged or lost while in the custody of a carrier, the Seller will (at its option) either replace such goods or refund to the Buyer the cost or price of them, but the Seller’s liability in connection with any such goods will not exceed the cost of replacement of them or the price paid by the Buyer for them. 6.2 The Seller will not be under any liability under 6.1 above unless the following conditions are strictly complied with: 6.2:1 In the event of nondelivery of a whole consignment of goods the Buyer must inform the Seller in writing within ten days of the date of the invoice. 6.2:2 In the case of damage to goods or loss of part of a consignment, the consignment must be inspected in the presence of the carrier. If any goods are damaged or lost the consignment note must be endorsed accordingly and the Buyer must notify the Seller within fortyeight hours of delivery, such notification to be confirmed in writing within the following five days.
7.2 If any goods supplied or processed or any services supplied or provided by or on behalf of the Seller prove on inspection to be defective in material or workmanship, the Seller will (at its option) replace the same or refund to the Buyer the price of the goods or services. 7.3 The Buyer will determine the suitability of the goods for its intended use and will not rely upon any representations made by or on behalf of the Seller. 7.4 The Seller’s liability under these conditions shall never exceed the cost of replacement or the price paid by the Buyer for the goods or services. 7.5 The Seller will not be liable for any consequential or indirect loss or damage (whether for loss of profit or otherwise) costs, expenses or other claims for consequential compensation whatsoever suffered by the Buyer whether this loss or damage arises from a breach of duty, in contract or in tort or in any other way (including loss or damage arising from the Seller’s negligence). 7.6 Except as set out in these conditions, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent permissible at law. 8. Termination If there is appointed a Receiver, Administrator or Administrative Receiver of the Buyer’s property or assets or any part of them, or a court order is made or a resolution is passed for the windingup of the Buyer (except for the purpose of amalgamation or reconstruction) or if the Buyer commits any act of bankruptcy, or any bankruptcy petition is presented against the Buyer (or any analogous proceedings under the law of any country outside the United Kingdom are commenced), the Seller may by notice in writing to the Buyer cancel all orders and contracts between the Seller and the Buyer or any part of them remaining unfulfilled. 9. Jurisdiction 9.1 All contracts between the Seller and the Buyer where the goods are shipped to or services are provided in the Republic of Ireland shall be governed and construed in accordance with the Laws of the Republic of Ireland, and the Buyer agrees to submit to the jurisdiction of the Courts of law in the Republic of Ireland in respect of them. 9.2 Except as provided above, all contracts between the Seller and the Buyer shall be governed and construed in accordance with the Laws of England, and the Buyer agrees to submit to the jurisdiction of the Courts of law in England in respect of them. Effective 1/7/1996
7. Liabilities and Warranties 7.1 Nothing in this clause will be deemed to exclude or restrict the Seller’s liability for death or personal injury resulting from the Seller’s negligence.
3M™ Power Tool System Product Catalogue
53
54
3M™ Power Tool System Product Catalogue
3 Abrasive Systems Customer Service Group
3M House, 28 Great Jackson Street Manchester M15 4PA United Kingdom Tel:0161 237 6390 Fax: 0161 237 1106
[email protected] www.3M.co.uk/abrasives
3M Ireland Limited
The Iveagh Building The Park Carrickmines Dublin 18 Tel: 01 280 3555 Fax: 01 280 3509
3M, Hookit, Stikit, Perfect-it, Roloc, Trizact, Finesse-it, Cubitron, Scotch-Brite, Clean & Strip, Green Corps, Ultrafina, Fre-Cut are trademarks of 3M Company © 3M 2010. All rights reserved.
