FOODSERVICE KN54 Series Encore® Wall Mount Faucets with Swing Spouts Double Jointed Spout
Horizontal Tubular Spouts
Tubular Spout with Lever Handles...
FOODSERVICE KN54 Series Encore® Wall Mount Faucets with Swing Spouts Double Jointed Spout
Horizontal Tubular Spouts
Tubular Spout with Lever Handles
Tubular Spout with Lever Handles Model
Model
Valves
Valves 18” (457mm)
6” (152mm) KN54-8106
KN54-8018
Ceramic
KN54-8006
Compression
Compression 8” (203mm)
KN54-8108
Ceramic
KN54-8008
Compression
12” (305mm)
10” (254mm) KN54-8110
2-5/8” (67mm)
Ceramic
KN54-8010
6” (152mm)
Compression 12” (305mm)
KN54-8112
Ceramic
KN54-8012
Compression
KN54-8012-MK*
Compression
1/2” NPT Female Inlets
14” (356mm) KN54-8114
Ceramic
KN54-8014
Compression
2-5/8” (67mm)
Spout Length
Spout Length
16” (406mm) KN54-8116
Ceramic
KN54-8016
Compression 1/2” NPT Female Inlets
* Supplied with KN40-1000 Mounting Kit
3-1/4” (83mm)
KSS54 Series Stainless Steel Wall Mount Faucets Type 304/316 Stainless Steel Construction • Furnished with 1/2” (13mm) inlets • 1/4-Turn Compression Cartridge with S/S components • In-Line check valves prevent cross-flow and backflow siphoning Stainless Steel Wall Mount Faucet 8” (203mm) Adj. Centers w/Swing Spout Model
Spout Length Swivel Gooseneck Spout
KSS54-8000SE1
3-1/2” (89mm) Rigid Spout
KSS54-8000RE1
3-1/2” (89mm)
Swivel Tubular Spout KSS54-8006SE1
6” (152mm)
KSS54-8012SE1
12” (305mm) - Shown
CHG
®
ELIMINATE LEAD FROM YOUR PLUMBING CHG has added a new series of Stainless Steel Plumbing Fixtures to the Encore® Premium Plumbing line, which are designed to meet or exceed evolving Low Lead and No Lead standards in the U.S. and abroad, such as California (AB1953) and Vermont (S152). The federal Safe Drinking Water Act strictly regulates the amount of lead permitted to leach from end point devices in potable water supplies and establishes ANSI/NSF 61 - Section 9 Annex G as the performance testing standard. These durable Encore faucets and pre-rinse units feature Type 304/316 stainless steel construction throughout, which eliminates the lead found in competing brass products and exceeds the testing parameters to meet ANSI/NSF 61 – Section 9 Annex G.
Water conserving aerators and laminar flow spout tips available upon request. See Page 106 For Options
Faucets furnished with both 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
31
PRE-RINSE ASSEMBLIES FOODSERVICE Encore® KN54 Series Wall Mount Faucets
8” Adj. Centers with Gooseneck Spout & Lever Handles Model
Valve
A
B
Cast Spouts C
8” (203mm) Cast Swing Spout with Lever Handles
3-1/2” (89mm) Swivel Gooseneck Spout KN54-8100
Ceramic
KN54-8000
Compression
3-1/2” (89mm)
9” (229mm)
6-3/8” (162mm)
3-1/2” (89mm) Rigid Gooseneck Spout KN54-8100-R
Ceramic
KN54-8000-R
Compression
3-1/2” (89mm)
9” (229mm)
Model
Valves
KN54-8108-TE1
Ceramic
KN54-8008-TE1
Compression
6-3/8” (162mm)
8” (203mm) Swivel Arched Cast Spout with Lever Handles Model
Faucets furnished with both 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8”(29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
32
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN57, KN61 and KN67 Series
4”, 6” and 8” Elevated Bridge Deck Mount Faucets with Swing Spouts 8” (203mm) Center w/Swing Spouts and Lever Handles
4” (102mm) Center w/Swing Spouts and Lever Handles Model
6” (152mm) Center w/Swing Spouts and Lever Handles Model
Ceramic
Valves
6” (152mm) Horizontal Tubular Spout KN67-6106
Ceramic
KN67-6006
Compression
8” (203mm) Horizontal Tubular Spout KN67-6108
Ceramic
KN67-6008
Compression
Furnished with 1/2” NPS Mounting Hardware
10” (254mm) Horizontal Tubular Spout KN67-6110
Ceramic
KN67-6010
Compression
12” (305mm) Horizontal Tubular Spout KN67-6112
Ceramic
KN67-6012
Compression
CHG
®
Water conserving aerators and laminar flow spout tips available upon request See Page 106 For Options
14” (356mm) Horizontal Tubular Spout KN67-6114
Ceramic
KN67-6014
Compression
16” (406mm) Horizontal Tubular Spout KN67-6116
Ceramic
KN67-6016
Compression
Faucets on Pages 32-36 Use the Following 1/4 Turn Cartridges:
KN50-Y006
Compression Cold
KN50-Y007
Compression Hot
KN50-Y006-CCV
Ceramic Cold
KN50-Y007-CCV
Ceramic Hot
Faucets furnished with both 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
33
PRE-RINSE ASSEMBLIES FOODSERVICE Encore® KN57 Series Elevated Bridge Deck Mount Faucets
with Swivel and Rigid Gooseneck and Double Jointed Spouts
A
B C
4” (102mm) Center with 8-1/2” (216mm) Gooseneck Spout & Lever Handles
4” (102mm) Center with 3-1/2” (89mm) Gooseneck Spout & Lever Handles Model
Valve
A
B
C
Model
Ceramic
KN57-4000
Compression
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
KN57-4101
Ceramic
KN57-4001
Compression
Ceramic
KN57-4000-R
Compression
3-1/2” (89mm)
9” (229mm)
B
8-1/2” (216mm)
15-3/4” (400mm)
6-3/8” (160mm)
KN57-4101-R
Ceramic
KN57-4001-R
Compression
8-1/2” (216mm)
A
B
C
6” (152mm) Swivel Gooseneck Spout KN57-4102
Ceramic
KN57-4002
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
6” (152mm) Rigid Gooseneck Spout KN57-4102-R
Ceramic
KN57-4002-R
Compression
6” (152mm)
12-3/4” (324mm)
10” (254mm)
6 (150mm)
4” (102mm) Center with 18” (457mm) Dbl Jointed Swivel Tubular Spout and Lever Handles
4” (102mm) Center with 6” (152mm) Gooseneck Spout & Lever Handles Valve
10” (254mm)
15-3/4” (400mm)
12 (300mm)
Model
C
8-1/2” (216mm) Rigid Gooseneck Spout
3-1/2” (89mm) Rigid Gooseneck Spout KN57-4100-R
A
8-1/2” (216mm) Swivel Gooseneck Spout
3-1/2” (89mm) Swivel Gooseneck Spout KN57-4100
Valve
9” (229mm)
Model
Valves
KN57-4118
Ceramic
KN57-4018
Compression 13” (330mm) Double-Jointed Cast Spout
KN57-4113-DE1
Ceramic
KN57-4013-DE1
Compression
Faucets furnished with both 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
34
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN67 Series Elevated Bridge Deck Mount Faucets
with Swivel and Rigid Gooseneck and Double Jointed Spouts
A
B C
6” (152mm) Center with 3-1/2” (89mm) Gooseneck Spout & Lever Handles Model
Valve
A
B
6” (152mm) Center with 8-1/2” (216mm) Gooseneck Spout & Lever Handles C
Model
3-1/2” (89mm) Swivel Gooseneck Spout KN67-6100
Ceramic
KN67-6000
Compression
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
KN67-6101
Ceramic
KN67-6001
Compression
3-1/2” (89mm) Rigid Gooseneck Spout KN67-6100-R
Ceramic
KN67-6000-R
Compression
3-1/2” (89mm)
9” (229mm)
Valve
A
B
8-1/2” (216mm)
15-3/4” (400mm)
6-3/8” (162mm)
6” (152mm) Center with 6” (152mm) Gooseneck Spout & Lever Handles Valve
A
B
Ceramic
KN67-6001-R
Compression
8-1/2” (216mm)
15-3/4” (400mm)
Ceramic
KN67-6002
Compression
6” (152mm)
12-3/4” (324mm)
C
9” (229mm)
6” (152mm) Rigid Gooseneck Spout KN67-6102-R
Ceramic
KN67-6002-R
Compression
6” (152mm)
12-3/4” (324mm)
10” (254mm)
6 (150mm)
6” (152mm) Center with 18” (457mm) Dbl Jointed Swivel Tubular Spout and Lever Handles
6” (152mm) Swivel Gooseneck Spout KN67-6102
10” (254mm)
8-1/2” (216mm) Rigid Gooseneck Spout KN67-6101-R
12 (300mm)
Model
C
8-1/2” (216mm) Swivel Gooseneck Spout
9” (229mm)
Model
Valves
KN67-6118
Ceramic
KN67-6018
Compression 13” (330mm) Double Jointed Cast Spout
KN67-6113-DE1
Ceramic
KN67-6013-DE1
Compression
Faucets furnished with both 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
35
FOODSERVICE Encore® KN61 Series Elevated Bridge Deck Mount Faucets
with Swivel and Rigid Gooseneck and Double Jointed Spouts
B
A
C
8” (203mm) Center with 8-1/2” (216mm) Gooseneck Spout & Lever Handles
8” (203mm) Center with 3-1/2” (89mm) Gooseneck Spout & Lever Handles Model
Valve
A
B
C
Model
Ceramic
KN61-8000
Compression
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
KN61-8101
Ceramic
KN61-8001
Compression
KN61-8000-R
Ceramic Compression
3-1/2” (89mm)
9” (229mm)
B
8-1/2” (216mm)
15-3/4” (400mm)
6-3/8” (162mm)
KN61-8101-R
Ceramic
KN61-8001-R
Compression
8-1/2” (216mm)
15-3/4” (400mm)
12 (305mm)
8” (203mm) Center with 6” (152mm) Gooseneck Spout & Lever Handles Model
Valve
A
B
Ceramic
KN61-8002
Compression
6” (152mm)
12-3/4” (324mm)
C
9” (229mm)
6” (152mm) Rigid Gooseneck Spout KN61-8102-R
Ceramic
KN61-8002-R
Compression
6” (152mm)
12-3/4” (324mm)
10” (254mm)
10” (254mm)
6 (152mm)
8” (203mm) Center with 18” (457mm) Swivel Double Jointed Swivel Tubular Spout and Lever Handle
Faucets furnished with both 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
36
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN64 Series
Single Pantry Faucets with Swivel and Rigid Gooseneck Spouts
A
B
C
6” Gooseneck Spout
3-1/2” Gooseneck Spout
Single Pantry with 6” (152mm) Swivel and Rigid Gooseneck Spout and Lever Handle
Single Pantry with 3-1/2” (89mm) Swivel and Rigid Gooseneck Spout and Lever Handle Model KN64-9100-SE1
Valves
A
B
C
KN64-9102-SE1
Ceramic
KN64-9002-SE1
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
6” (152mm)
12-3/4” (324mm)
9” (229mm)
A
B
C
Ceramic
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
KN64-9102-RE1
Ceramic
KN64-9002-RE1
Compression
KN64-9000-SE1
Compression
KN64-9100-RE1
Ceramic
KN64-9000-RE1
Model
Valves
Compression
Single Pantry with 3-1/2” (89mm) Swivel and Rigid Gooseneck Spout and Cross Handle Model
Valves
KN64-9100-SE2
Ceramic
KN64-9000-SE2
Compression
KN64-9100-RE2
Ceramic
KN64-9000-RE2
Compression
A
B
Single Pantry with 6” (152mm) Swivel and Rigid Gooseneck Spout and Cross Handle C
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
Single Pantry with 3-1/2” (89mm) Swivel and Rigid Gooseneck Spout and 4” (102mm) Wrist Blade Handle Model
Model
Valves
A
B
C
KN64-9102-SE2
Ceramic
KN64-9002-SE2
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
KN64-9102-RE2
Ceramic
KN64-9002-RE2
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
Single Pantry with 6” (152mm) Swivel and Rigid Gooseneck Spout and 4” (102mm) Wrist Blade Handle Model
Valves
A
B
C
KN64-9102-SE4
Ceramic
KN64-9002-SE4
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
6” (152mm)
12-3/4” (324mm)
9” (229mm)
Valves
A
B
C
KN64-9100-SE4
Ceramic
KN64-9000-SE4
Compression
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
KN64-9102-RE4
Ceramic
KN64-9002-RE4
Compression
KN64-9100-RE4
Ceramic
KN64-9000-RE4
Compression
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
37
FOODSERVICE Encore® KN64 Series
Single Pantry Faucet with Swivel and Rigid Gooseneck and Cast Spouts 6” Swivel Cast Spout Single Pantry with 6” (152mm) Swivel Cast Spout and Lever Handle
A
B
C
Model
Valves
KN64-9106-TE1
Ceramic
KN64-9006-TE1
Compression
8-1/2” Gooseneck Spout Single Pantry with 8-1/2” (216mm) Swivel and Rigid Gooseneck Spout and Lever Handle Model
Single Pantry with 6” (152mm) Swivel Cast Spout and Cross Handle
Valves
A
B
C
KN64-9101-SE1
Ceramic
KN64-9001-SE1
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
KN64-9101-RE1
Ceramic
KN64-9001-RE1
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
Model
Valves
KN64-9106-TE2
Ceramic
KN64-9006-TE2
Compression
Single Pantry with 6” (152mm) Swivel Cast Spout and 4” (102mm) Wrist Blade Handle Model
Single Pantry with 8-1/2” (216mm) Swivel and Rigid Gooseneck Spout and Cross Handle Model
Valves
A
B
C
KN64-9101-SE2
Ceramic
KN64-9001-SE2
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
KN64-9101-RE2
Ceramic
KN64-9001-RE2
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
Valves
KN64-9106-TE4
Ceramic
KN64-9006-TE4
Compression
8” Swivel Cast Spout Single Pantry with 8” (203mm) Swivel Cast Spout and Lever Handle Model
Valves
KN64-9108-TE1
Ceramic
KN64-9008-TE1
Compression
Single Pantry with 8” (203mm) Swivel Cast Spout and Cross Handle Model
Valves
KN64-9108-TE2
Ceramic
KN64-9008-TE2
Compression
Single Pantry with 8-1/2” (216mm) Swivel and Rigid Gooseneck Spout and 4” (102mm) Wrist Blade Handle Model
Valves
A
B
C
KN64-9101-SE4
Ceramic
KN64-9001-SE4
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
KN64-9101-RE4
Ceramic
KN64-9001-RE4
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
Single Pantry with 8” (203mm) Swivel Cast Spout and 4” (102mm) Wrist Blade Handle Model
Valves
KN64-9108-TE4
Ceramic
KN64-9008-TE4
Compression
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
38
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN64 Series
Single Pantry Faucets with Swing and Double Jointed Spouts
Single Pantry with Horizontal Tubular Spout and Lever Handle Model
Valves
KN64-9106-SE1
Ceramic
KN64-9006-SE1
Compression
KN64-9108-SE1
Ceramic
KN64-9008-SE1
Compression
KN64-9110-SE1
Ceramic
KN64-9010-SE1
Compression
KN64-9112-SE1
Ceramic
KN64-9012-SE1
Compression
KN64-9114-SE1
Ceramic
KN64-9014-SE1
Compression
KN64-9116-SE1
Ceramic
KN64-9016-SE1
Compression
Single Pantry with Horizontal Tubular Spout and 4” (102mm) Wrist Blade Handle
Single Pantry with Double Jointed Spout and Lever Handle KN64-9118-SE1
Valves
KN64-9106-SE4
Optional Temperature Mixing Valve
Spout Length
Model
18” (457mm)
KN63-Y005
Description For single handle faucets only
Faucets on Pages 37-39 Use the Following 1/4 Turn Cartridges:
KN50-Y006
Compression Cold
KN50-Y007
Compression Hot
KN50-Y006-CCV
Ceramic Cold
KN50-Y007-CCV
Ceramic Hot
Note: All single handle faucets available with temperature mixing valve. To order, add suffix “MV” to end of model number. Furnished with 1/2” NPS male inlet with 1/4” NPT union tailpiece and mounting hardware. Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
39
FOODSERVICE Encore® KN51 Series Double Pantry Faucets with Swivel and Rigid Gooseneck Spouts
A
B
C
6” Swivel Spout
3” Swivel Spout
Double Pantry with 6” (152mm) Swivel and Rigid Gooseneck Spout and Lever Handles
Double Pantry with 3” (76mm) Swivel and Rigid Gooseneck Spout and Lever Handles Model
Model
Valves
A
B
C
KN51-9102-SE1
Ceramic
KN51-9002-SE1
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
6” (152mm)
12-3/4” (324mm)
9” (229mm)
Valves
A
B
C
KN51-9100-SE1
Ceramic
KN51-9000-SE1
Compression
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
KN51-9102-RE1
Ceramic
KN51-9002-RE1
Compression
KN51-9100-RE1
Ceramic
KN51-9000-RE1
Compression
Double Pantry with 3” (76mm) Swivel and Rigid Gooseneck Spout and Cross Handles Model
Double Pantry with 6” (152mm) Swivel and Rigid Gooseneck Spout and Cross Handles
Valves
A
B
C
KN51-9100-SE2
Ceramic
KN51-9000-SE2
Compression
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
KN51-9100-RE2
Ceramic
KN51-9000-RE2
Compression
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
Double Pantry with 3” (76mm) Swivel and Rigid Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Valves
KN51-9100-SE4
Ceramic
KN51-9000-SE4
Compression
KN51-9100-RE4
Ceramic
KN51-9000-RE4
Compression
A
B
C
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
3-1/2” (89mm)
11-7/8” (302mm)
9-1/4” (235mm)
Model
Valves
A
B
C
KN51-9102-SE2
Ceramic
KN51-9002-SE2
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
KN51-9102-RE2
Ceramic
KN51-9002-RE2
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
Double Pantry with 6” (152mm) Swivel and Rigid Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Valves
A
B
C
KN51-9102-SE4
Ceramic
KN51-9002-SE4
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
KN51-9102-RE4
Ceramic
KN51-9002-RE4
Compression
6” (152mm)
12-3/4” (324mm)
9” (229mm)
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples and 1-1/4” (32mm) hole for double pantry.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
40
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN51 Series Double Pantry Faucets
with Swivel and Rigid Gooseneck, Cast and Double Jointed Spouts 6” Swivel Cast Spout A
B
C
Double Pantry with 6” (152mm) Swivel Cast Spout and Lever Handles Model
Valves
KN51-9106-TE1
Ceramic
KN51-9006-TE1
Compression
8” Gooseneck Spout Double Pantry with 8” (203mm) Swivel and Rigid Gooseneck Spout and Lever Handles Model
Valves
A
B
C
KN51-9101-SE1
Ceramic
KN51-9001-SE1
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
KN51-9101-RE1
Ceramic
KN51-9001-RE1
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
Double Pantry with 6” (152mm) Swivel Cast Spout and Cross Handles Model
Valves
KN51-9106-TE2
Ceramic
KN51-9006-TE2
Compression
Double Pantry with 6” (152mm) Swivel Cast Spout and 4” (102mm) Wrist Blade Handles Model
Double Pantry with 8” (203mm) Swivel and Rigid Gooseneck Spout and Cross Handles Model
Valves
A
B
C
KN51-9101-SE2
Ceramic
KN51-9001-SE2
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
KN51-9101-RE2
Ceramic
KN51-9001-RE2
Compression
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
Valves
KN51-9106-TE4
Ceramic
KN51-9006-TE4
Compression
13” Double Jointed Cast Spouts Double Pantry with 13” (330mm) Swivel Double Jointed Spout and Lever Handles Model
Valves
KN51-9113-DE1
Ceramic
KN51-9013-DE1
Compression
Double Pantry with 13” (330mm) Swivel Double Jointed Spout and Cross Handles Model
Valves
KN51-9113-DE2
Ceramic
KN51-9013-DE2
Compression
Double Pantry with 8” (203mm) Swivel and Rigid Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Valves
A
B
C
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
8-1/2” (216mm)
15-3/4” (400mm)
10” (254mm)
KN51-9101-SE4
Ceramic
KN51-9001-SE4
Compression
KN51-9101-RE4
Ceramic
KN51-9001-RE4
Compression
Double Pantry with 13”(330mm) Swivel Dbl Jointed Spout & 4”(102mm) Wrist Blade Handles Model
Valves
KN51-9113-DE4
Ceramic
KN51-9013-DE4
Compression
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples and 1-1/4” (32mm) hole for double pantry.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
41
FOODSERVICE Encore® KN51 Series
Double Pantry Faucets with Swing and Double Jointed Spouts
Double Pantry with Horizontal Tubular Spout and 4” (102mm) Wrist Blade Handles
Double Pantry with Horizontal Tubular Spout and Lever Handles Model
Note: Furnished with 1/2” NPS male inlets with 1/4” NPT union tailpieces and mounting hardware.
12” (305mm)
6” (152mm)
Double Pantry with Double Jointed Spout and Lever Handles Model
Valves
KN51-9118-SE1
Ceramic
KN51-9018-SE1
Compression
Spout Length 18” (457mm)
Note: Furnished with 1/2” NPS male inlets with 1/4” NPT union tailpieces and mounting hardware. Faucets on Pages 40-42 Use the Following 1/4 Turn Cartridges:
KN50-Y006
Compression Cold
KN50-Y007
Compression Hot
KN50-Y006-CCV
Ceramic Cold
KN50-Y007-CCV
Ceramic Hot
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples and 1-1/4” (32mm) hole for double pantry.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
42
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN72 and KN74 Series Single Wall & Deck Mount Bases with Swing, Swivel and Rigid Gooseneck and Double Jointed Spouts
SPOUT LENGTH
B
A C
KN72 Series Wall Mount Spout Bases with Horizontal Swing Spouts Model
Spout Length
Model
KN72-9006
6” (152mm)
KN72-9006-Q
KN72-9008
8” (203mm)
KN72-9008-Q
KN72-9010
10” (254mm)
KN72-9010-Q
KN72-9012
12” (305mm)
KN72-9012-Q
KN72-9014
14” (356mm)
KN72-9014-Q
KN72-9016
16” (406mm)
KN72-9016-Q
KN72-9018*
18” (457mm)
KN72-9018-Q*
KN72 Series Wall Mount Spout Bases with Gooseneck Swing Spouts Model
A
B
C
KN72-9000
3-1/2” (89mm)
8” (203mm)
5-1/2” (140mm)
KN72-9000-Q
KN72-9001
8-1/2” (216mm)
12” (305mm)
6” (152mm)
KN72-9001-Q
KN72-9002
6” (152mm)
9-1/4” (235mm)
5-1/4” (133mm)
KN72-9002-Q
With Rigid Spouts KN72-9000-R
3-1/2” (89mm)
8” (203mm)
6-3/16” (157mm)
KN72-9000-RQ
KN72-9001-R
8-1/2” (216mm)
12” (305mm)
6-11/16” (169mm)
KN72-9001-RQ
KN72-9002-R
6” (152mm)
9-1/4” (235mm)
5-15/16” (151mm)
KN72-9002-RQ
* Double jointed spout
Wall mounted spout bases furnished with 1/2” NPT female inlet, nipple, ell and mounting hardware.
Model
SPOUT LENGTH B
A C
KN74 Series Deck Mount Spout Bases with Gooseneck Swing Spouts
KN74 Series Single Deck Mount with Horizontal Swing Spouts Model
Spout Length
Model
KN74-9006
6” (152mm)
KN74-9006-Q
KN74-9008
8” (203mm)
KN74-9008-Q
KN74-9010
10” (254mm)
KN74-9010-Q
KN74-9012
12” (305mm)
KN74-9012-Q
KN74-9014
14” (356mm)
KN74-9014-Q
KN74-9016
16” (406mm)
KN74-9016-Q
KN74-9018*
18” (457mm)
KN74-9018-Q*
Model
A
B
C
KN74-9000
3-1/2” (89mm)
8” (203mm)
5-1/2” (140mm)
KN74-9000-Q
KN74-9001
8-1/2” (216mm)
12” (305mm)
6” (152mm)
KN74-9001-Q
KN74-9002
6” (152mm)
9-1/4” (235mm)
5-1/4” (133mm)
KN74-9002-Q
With Rigid Spouts KN74-9000-R
3-1/2” (89mm)
8” (203mm)
6-3/16” (157mm)
KN74-9000-RQ
KN74-9001-R
8-1/2” (216mm)
12” (305mm)
6-11/16” (169mm)
KN74-9001-RQ
KN74-9002-R
6” (152mm)
9-1/4” (235mm)
5-15/16” (151mm)
KN74-9002-RQ
* Double jointed spout
Deck mounted spout bases furnished with 1/2” NPS male inlet with 1/4” NPT union tailpiece and mounting hardware.
Model
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
43
FOODSERVICE Foot and Knee Operated Valves For Use with Spout Bases
• Self closing valves • Color indexed pedals • (2) 1/2” NPT female inlets and (1) 1/2” NPT female outlet
Foot Dual Lever Controls Self-Closing Hot and Cold Model
K25-1000
Rough chrome valve body with highly polished chrome foot pedals. • Dual pedal operation • Self closing valves • Color indexed pedals
4-7/8” (124mm)
5-5/8” (143mm) 4-5/8” (117mm) 2-11/16” (68mm)
1” (25mm)
5/16” (8mm) 2-1/2” (64mm)
Foot Pedal
1-1/4” (32mm)
#10 Flathead 3” (76mm)
2-11/16” (68mm)
1/2” NPT 1-1/2” (38mm)
5/16” (8mm) 2” (51mm) 3” (76mm)
Replacement Pedal Kit Model
Button Valve
4-15/16” (125mm)
K25-2000
Rough chrome valve body with highly polished chrome foot pedal. • Single pedal operation • Self closing valves • Color indexed pedal
2” (51mm)
7/8” (22mm)
Foot Single Lever Control Self-Closing Hot or Cold Model
1/2” NPT
#10 Flathead
15/16” (24mm)
Foot Pedal Button Valve
K25-0110
7/8” (22mm)
For Models K25-1000 & K25-2000
Knee Dual Lever Controls Self-Closing Hot and Cold Model
5-5/8” (143mm) 4-5/8” (117mm)
K25-3000
Rough chrome valve body with highly polished chrome knee pedals. • Dual pedal operation • Self closing valves • Color indexed pedals
2-11/16” (68mm)
Knee Valve Repair Kit Model
K25-0330
For Models K25-3000 & K25-4000
3” (76mm)
1/2” NPT
1” (25mm)
2” (51mm)
7/8” (22mm) Button Valve
4” (102mm)
K25-4000
Rough chrome valve body with highly polished chrome knee pedal. • Single pedal operation • Self closing valves • Color indexed pedal
4-3/4” (121mm)
5/16” (8mm)
6” (152mm)
Knee Single Lever Control Self-Closing Hot or Cold Model
#10 Flathead
Knee Valve
3” (76mm) 2” (51mm) 3” (76mm) 6-3/8” (162mm)
4-9/16” (116mm) 1/2” NPT
2-11/16” (68mm)
1-1/2” (38mm)
5/16” (8mm) 2” (51mm)
1/2” NPT
15/16” (24mm) 7/8” (22mm) Button Valve Knee Valve
All Foot & Knee Pedals Use the Following Valve:
Model
44
www.encoreplumbing.com
KN50-Y027 Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN41 Series
4” Deck Mount Faucets with Swivel Gooseneck Spouts • 4” (102mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 4” faucet with built-in check valves to prevent back and cross flow and offer positive seal • Specification grade quality for hand sinks • High commercial quality for hand sinks
3-1/2” Swivel Gooseneck Spout 4” (102mm) Deck Mount with 3-1/2” (89mm) Swivel Gooseneck Spout and Cross Handles
4” (102mm) Deck Mount with 3-1/2” (89mm) Swivel Gooseneck Spout and Lever Handles Model KN41-4100-SE1 KN41-4000-SE1
Valves
A
B
C
Ceramic
3-1/2” (89mm)
8-5/16” (211mm)
6-1/16” (154mm)
Compression
Model
Valves
A
B
C
KN41-4100-SE2
Ceramic
KN41-4000-SE2
Compression
3-1/2” (89mm)
8-5/16” (211mm)
6-1/16” (154mm)
A
B C
4” (102mm) Deck Mount with 3-1/2” (89mm) Swivel Gooseneck Spout and 4” Wrist Blade Handles Model
Valves
A
B
C
KN41-4100-SE4
Ceramic
KN41-4000-SE4
Compression
3-1/2” (89mm)
8-5/16” (211mm)
6-1/16” (154mm)
2” (51mm)
All KN41 Series Faucets have 1/2 NPSM male inlets and are furnished with mounting hardware.
FOR A COMPLETE LIST OF AVAILABLE OPTIONS SEE OUR CONFIGURATOR ON PAGE 140 Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
45
FOODSERVICE Encore® KN41 Series
4” Deck Mount Faucets with Swivel Gooseneck Spouts • 4” (102mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 4” faucet with built-in check valves to prevent back and cross flow and offer positive seal • Specification grade quality for hand sinks • High commercial quality for hand sinks
8” Swivel Gooseneck Spout
6” Swivel Gooseneck Spout 4” (102mm) Deck Mount with 6” (152mm) Swivel Gooseneck Spout and Lever Handles Model
Valves
A
B
C
KN41-4102-SE1
Ceramic
KN41-4002-SE1
Compression
6” (152mm)
9-3/16” (233mm)
5-1/2” (140mm)
4” (102mm) Deck Mount with 6” (152mm) Swivel Gooseneck Spout and Cross Handles Model KN41-4102-SE2 KN41-4002-SE2
Valves
A
B
C
Ceramic
6” (152mm)
9-3/16” (233mm)
5-1/2” (140mm)
Compression
4” (102mm) Deck Mount with 6” (152mm) Swivel Gooseneck Spout and 4” Wrist Blade Handles Model
Valves
A
B
C
KN41-4102-SE4
Ceramic
KN41-4002-SE4
Compression
6” (152mm)
9-3/16” (233mm)
5-1/2” (140mm)
4” (102mm) Deck Mount with 8-1/2” (216mm) Swivel Gooseneck Spout and Lever Handles Model
Valves
A
B
C
KN41-4101-SE1
Ceramic
KN41-4001-SE1
Compression
8-1/2” (216mm)
12-1/16” (306mm)
6-5/16” (160mm)
4” (102mm) Deck Mount with 8-1/2” (216mm) Swivel Gooseneck Spout and Cross Handles Model
Valves
A
B
C
KN41-4101-SE2
Ceramic
KN41-4001-SE2
Compression
8-1/2” (216mm)
12-1/16” (306mm)
6-5/16” (160mm)
4” (102mm) Deck Mount with 8-1/2” (216mm) Swivel Gooseneck Spout and 4” Wrist Blade Handles Model
Valves
A
B
C
KN41-4101-SE4
Ceramic
KN41-4001-SE4
Compression
8-1/2” (216mm)
12-1/16” (306mm)
6-5/16” (160mm)
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
46
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN41 Series 4” Deck Mount Faucets with Horizontal Tubular and Swivel Arched Tubular Spouts • 4” (102mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 4” faucet with built-in check valves to prevent back and cross flow and offer positive seal • Specification grade quality for hand sinks • High commercial quality for hand sinks
B
A C
2” (51mm)
Horizontal Tubular Spouts
4” (102mm) Deck Mount with Horizontal Tubular Spouts and 4” (102mm) Wrist Blade Handles
4” (102mm) Deck Mount with Horizontal Tubular Spouts and Lever Handles Model
Valves
A
B
C
KN41-4106-SE1
Ceramic
KN41-4006-SE1
Compression
6” (152mm)
4-3/4” (121mm)
2-1/2” (64mm)
A
B
C
KN41-4106-SE4
Ceramic
KN41-4006-SE4
Compression
6” (152mm)
4-3/4” (121mm)
2-1/2” (64mm)
8” (203mm)
5-1/4” (133mm)
3” (76mm)
10” (254mm)
5-11/16” (144mm)
3-7/16” (87mm)
12” (305mm)
6-1/8” (155mm)
3-7/8” (98mm)
8” (203mm) Spout
8” (203mm) Spout KN41-4008-SE1
Valves
6” (152mm) Spout
6” (152mm) Spout
KN41-4108-SE1
Model
Ceramic Compression
8” (203mm)
5-1/4” (133mm)
3” (76mm)
KN41-4108-SE4
Ceramic
KN41-4008-SE4
Compression
10” (254mm) Spout
10” (254mm) Spout KN41-4110-SE1
Ceramic
KN41-4010-SE1
Compression
10” (254mm)
5-11/16” (144mm)
3-7/16” (87mm)
KN41-4110-SE4
Ceramic
KN41-4010-SE4
Compression
12” (305mm) Spout
12” (305mm) Spout KN41-4112-SE1
Ceramic
KN41-4012-SE1
Compression
12” (305mm)
6-1/8” (155mm)
3-7/8” (98mm)
KN41-4112-SE4
Ceramic
KN41-4012-SE4
Compression
9-1/2” Swivel Arched Tubular Spouts 4” (102mm) Deck Mount with 9-1/2” (241mm) Swivel Arched Tubular Spouts & Lever Handles 4” (102mm) Deck Mount with Horizontal Tubular Spouts and Cross Handles Model
Valves
A
B
C
KN41-4106-SE2
Ceramic
KN41-4006-SE2
Compression
6” (152mm)
4-3/4” (121mm)
2-1/2” (64mm)
6” (152mm) Spout
Model
Valves
KN41-4109-SE1
Ceramic
KN41-4009-SE1
Compression
4” (102mm) Deck Mount with 9-1/2” (241mm) Swivel Arched Tubular Spouts & Cross Handles Model
8” (203mm) Spout KN41-4108-SE2
Ceramic
KN41-4008-SE2
Compression
8” (203mm)
5-1/4” (133mm)
3” (76mm)
10” (254mm)
5-11/16” (144mm)
3-7/16” (87mm)
10” (254mm) Spout KN41-4110-SE2
Ceramic
KN41-4010-SE2
Compression
Valves
KN41-4109-SE2
Ceramic
KN41-4009-SE2
Compression
4” (102mm) Deck Mount with 9-1/2” (241mm) Swivel Arched Tubular Spouts & 4” (102mm) Wrist Blade Handles Model
12” (305mm) Spout KN41-4112-SE2
Ceramic
KN41-4012-SE2
Compression
12” (305mm)
6-1/8” (155mm)
3-7/8” (98mm)
Valves
KN41-4109-SE4
Ceramic
KN41-4009-SE4
Compression
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
47
FOODSERVICE Encore® KN41 Series
4” Deck Mount Faucets with Cast and Rigid Vacuum Breaker Spouts • 4” (102mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 4” faucet with built-in check valves to prevent back and cross flow and offer positive seal • Specification grade quality for hand sinks • High commercial quality for hand sinks
6” Cast Spout
6” Vacuum Breaker Spout
4” (102mm) Deck Mount with 6” (152mm) Cast Spout and Lever Handles
4” (102mm) Deck Mount with 6” (152mm) Vacuum Breaker Spout and Lever Handles
Model
Model
Valves
Valves
KN41-4106-TE1
Ceramic
KN41-4153-KR1
Ceramic
KN41-4006-TE1
Compression
KN41-4053-KR1
Compression
4” (102mm) Deck Mount with 6” (152mm) Cast Spout and Cross Handles
4” (102mm) Deck Mount with 6” (152mm) Vacuum Breaker Spout and Blade Handles
Model
Model
Valves
Valves
KN41-4106-TE2
Ceramic
KN41-4153-KR4
Ceramic
KN41-4006-TE2
Compression
KN41-4053-KR4
Compression
8” Vacuum Breaker Spout 4” (102mm) Deck Mount with 6” (152mm) Cast Spout and 4” Wrist Blade Handles
4” (102mm) Deck Mount with 8” (203mm) Vacuum Breaker Spout and Lever Handles
Model
Model
Valves
Valves
KN41-4106-TE4
Ceramic
KN41-4154-KR1
Ceramic
KN41-4006-TE4
Compression
KN41-4054-KR1
Compression
8” Cast Spout 4” (102mm) Deck Mount with 8” (203mm) Cast Spout and Lever Handles Model
Valves
4”(102mm) Deck Mount with 8”(203mm) Vacuum Breaker Spout & Blade Handles Model
Valves
KN41-4108-TE1
Ceramic
KN41-4154-KR4
Ceramic
KN41-4008-TE1
Compression
KN41-4054-KR4
Compression
13” Double Jointed Spout 4” (102mm) Deck Mount with 8” (203mm) Cast Spout and Cross Handles
4” (102mm) Deck Mount with 13”(330mm) Dbl Jointed Cast Spout & Lever Handles
Model
Model
Valves
Valves
KN41-4108-TE2
Ceramic
KN41-4113-DE1
Ceramic
KN41-4008-TE2
Compression
KN41-4013-DE1
Compression
4” (102mm) Deck Mount with 8” (203mm) Cast Spout and 4” Wrist Blade Handles Model
Valves
KN41-4108-TE4
Ceramic
KN41-4008-TE4
Compression
4” (102mm) Deck Mount with 13” (330mm) Double Jointed Cast Spout & 4” Wrist Blade Handles Model
Valves
KN41-4113-DE4
Ceramic
KN41-4013-DE4
Compression
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
48
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN41 Series
8” Deck Mount Faucets with Swivel Gooseneck Spouts • 8” (203mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 8” faucet with built-in check valves to prevent back and cross flow and offer positive seal
3-1/2” Swivel Gooseneck Spout 8” (203mm) Deck Mount with 3-1/2” (789mm) Swivel Gooseneck Spout and Lever Handles Model
Valves
A
B
C
KN41-8100-SE1
Ceramic
KN41-8000-SE1
Compression
3-1/2” (89mm)
8-5/16” (211mm)
6-1/16” (154mm)
8” (203mm) Deck Mount with 3-1/2” (89mm) Swivel Gooseneck Spout and Cross Handles Model
Valves
A
B
C
KN41-8100-SE2
Ceramic
KN41-8000-SE2
Compression
3-1/2” (89mm)
8-5/16” (211mm)
6-1/16” (154mm)
A
B C
8” (203mm) Deck Mount with 3-1/2” (89mm) Swivel Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Valves
A
B
C
KN41-8100-SE4
Ceramic
KN41-8000-SE4
Compression
3-1/2” (89mm)
8-5/16” (211mm)
6-1/16” (154mm)
2” (51mm)
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
49
FOODSERVICE Encore® KN41 Series
8” Deck Mount Faucets with Swivel Gooseneck Spouts • 8” (203mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 8” faucet with built-in check valves to prevent back and cross flow and offer positive seal
8-1/2” Swivel Gooseneck Spout
6” Swivel Gooseneck Spout
8” (203mm) Deck Mount with 8-1/2” (216mm) Swivel Gooseneck Spout and Lever Handles
8” (203mm) Deck Mount with 6” (152mm) Swivel Gooseneck Spout and Lever Handles Model KN41-8102-SE1 KN41-8002-SE1
Valves
A
B
C
Ceramic
6” (152mm)
9-3/16” (233mm)
5-1/2” (140mm)
Compression
8” (203mm) Deck Mount with 6” (152mm) Swivel Gooseneck Spout and Cross Handles Model
Valves
A
B
C
KN41-8101-SE1
Ceramic
KN41-8001-SE1
Compression
8-1/2” (216mm)
12-1/16” (306mm)
6-5/16” (160mm)
8” (203mm) Deck Mount with 8-1/2” (216mm) Swivel Gooseneck Spout and Cross Handles
Valves
A
B
C
KN41-8102-SE2
Ceramic
KN41-8002-SE2
Compression
6” (152mm)
9-3/16” (233mm)
5-1/2” (140mm)
8” (203mm) Deck Mount with 6” (152mm) Swivel Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Model
Valves
A
B
C
KN41-8102-SE4
Ceramic
KN41-8002-SE4
Compression
6” (152mm)
9-3/16” (233mm)
5-1/2” (140mm)
Model
Valves
A
B
C
KN41-8101-SE2
Ceramic
KN41-8001-SE2
Compression
8-1/2” (216mm)
12-1/16” (306mm)
6-5/16” (160mm)
8” (203mm) Deck Mount with 8-1/2” (216mm) Swivel Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Valves
A
B
C
KN41-8101-SE4
Ceramic
KN41-8001-SE4
Compression
8-1/2” (216mm)
12-1/16” (306mm)
6-5/16” (160mm)
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
50
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN41 Series
8” Deck Mount Faucets Horizontal Tubular, Arched Tubular and Arched Cast Spouts • 8” (203mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 8” faucet with built-in check valves to prevent back and cross flow and offer positive seal B
A C
2” (51mm)
Horizontal Tubular Spouts 8” (203mm) Deck Mount with Horizontal Tubular Spouts and Lever Handles Model
Valves
A
B
C
6” (152mm) Spout
8” (203mm) Deck Mount with Horizontal Tubular Spouts and 4” (102mm) Wrist Blade Handles Model
Valves
A
B
C
KN41-8106-SE4
Ceramic
KN41-8006-SE4
Compression
6” (152mm)
4-7/8” (124mm)
2-5/8” (67mm)
8” (203mm)
5-3/8” (136mm)
3-1/8” (79mm)
10” (254mm)
5-13/16” (148mm)
3-9/16” (90mm)
12” (305mm)
6-1/4” (159mm)
4” (102mm)
6” (152mm) Spout
KN41-8106-SE1
Ceramic
KN41-8006-SE1
Compression
6” (152mm)
4-7/8” (124mm)
2-5/8” (67mm)
8” (203mm) Spout
8” (203mm) Spout
KN41-8108-SE1
Ceramic
KN41-8008-SE1
Compression
8” (203mm)
5-3/8” (136mm)
3-1/8” (79mm)
10” (254mm) Spout
KN41-8108-SE4
Ceramic
KN41-8008-SE4
Compression
10” (254mm) Spout
KN41-8110-SE1
Ceramic
KN41-8010-SE1
Compression
10” (254mm)
5-13/16” (148mm)
3-9/16” (90mm)
12” (305mm) Spout
KN41-8110-SE4
Ceramic
KN41-8010-SE4
Compression
12” (305mm) Spout
KN41-8112-SE1
Ceramic
KN41-8012-SE1
Compression
12” (305mm)
6-1/4” (159mm)
4” (102mm)
9-1/2” Swivel Arched Tubular Spout
KN41-8112-SE4
Ceramic
KN41-8012-SE4
Compression
8” Swivel Cast Spout 8” (203mm) Deck Mount with 8” Swivel Arched Cast Spout and Lever Handles
8” (203mm) Deck Mount with 9-1/2” (241mm) Swivel Arched Tubular Spout and Lever Handles Model
Valves
Model
Valves
KN41-8109-SE1
Ceramic
KN41-8108-AE1
Ceramic
KN41-8009-SE1
Compression
KN41-8008-AE1
Compression
8” (203mm) Deck Mount with 9-1/2” (241mm) Swivel Arched Tubular Spout and Cross Handles Model
Valves
8” (203mm) Deck Mount with 8” Swivel Arched Cast Spout and Cross Handles Model
Valves
KN41-8109-SE2
Ceramic
KN41-8108-AE2
Ceramic
KN41-8009-SE2
Compression
KN41-8008-AE2
Compression
8” (203mm) Deck Mount with 9-1/2” (241mm) Swivel Arched Tubular Spout and 4” (102mm) Wrist Blade Handle Model
Valves
8” (203mm) Deck Mount with 8” Swivel Arched Cast Spout and 4” (102mm) Wrist Blade Handles Model
Valves
KN41-8109-SE4
Ceramic
KN41-8108-AE4
Ceramic
KN41-8009-SE4
Compression
KN41-8008-AE4
Compression
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
51
FOODSERVICE Encore® KN45 Series
1” (25mm)
4” Wall Mount Faucets with Swivel Gooseneck Spouts • 4” (102mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 4” faucet with built-in check valves to prevent back and cross flow and offer positive seal • Specification grade quality for hand sinks • High commercial quality for hand sinks
C
A B
1” (25mm)
3” Swivel Gooseneck Spout
4” (102mm) Wall Mount with 3” (76mm) Swivel Gooseneck Spout and 4” Wrist Blade Handles
4” (102mm) Wall Mount with 3” (76mm) Swivel Gooseneck Spout and Lever Handles Model
Valves
A
B
C
KN45-4100-SE1
Ceramic
KN45-4000-SE1
Compression
3-1/2” (89mm)
8-3/16” (208mm)
5-15/16” (151mm)
6” Swivel Gooseneck Spout
Model
Valves
A
B
C
KN45-4100-SE4
Ceramic
KN45-4000-SE4
Compression
3-1/2” (89mm)
8-3/16” (208mm)
5-15/16” (151mm)
8” Swivel Gooseneck Spout
4” (102mm) Wall Mount with 6” (152mm) Swivel Gooseneck Spout and Lever Handles Model
4” (102mm) Wall Mount with 8” (203mm) Swivel Gooseneck Spout and Lever Handles
Valves
A
B
C
KN45-4102-SE1
Ceramic
KN45-4002-SE1
Compression
6” (152mm)
9-1/16” (230mm)
5-3/8” (137mm)
Model
Valves
A
B
C
KN45-4101-SE1
Ceramic
KN45-4001-SE1
Compression
8-1/2” (216mm)
11-15/16” (303mm)
6-3/16” (157mm)
4” (102mm) Wall Mount with 8” (203mm) Swivel Gooseneck Spout and Cross Handles
4” (102mm) Wall Mount with 6” (152mm) Swivel Gooseneck Spout and Cross Handles Model
Valves
A
B
C
KN45-4102-SE2
Ceramic
KN45-4002-SE2
Compression
6” (152mm)
9-1/16” (230mm)
5-3/8” (137mm)
Valves
A
B
C
KN45-4101-SE2
Ceramic
KN45-4001-SE2
Compression
8-1/2” (216mm)
11-15/16” (303mm)
6-3/16” (157mm)
4” (102mm) Wall Mount with 8” (203mm) Swivel Gooseneck Spout and 4” Wrist Blade Handles
4” (102mm) Wall Mount with 6” (152mm) Swivel Gooseneck Spout and 4” Wrist Blade Handles Model
Model
Valves
A
B
C
KN45-4102-SE4
Ceramic
KN45-4002-SE4
Compression
6” (152mm)
9-1/16” (230mm)
5-3/8” (137mm)
Model
Valves
A
B
C
KN45-4101-SE4
Ceramic
KN45-4001-SE4
Compression
8-1/2” (216mm)
11-15/16” (303mm)
6-3/16” (157mm)
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
52
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN45 Series
4” Wall Mount Faucets with Horizontal Tubular, Arched Tubular and Cast Spouts • 4” (102mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 4” faucet with built-in check valves to prevent back and cross flow and offer positive seal • Specification grade quality for hand sinks • High commercial quality for hand sinks
Horizontal Tubular Spouts 4” (102mm) Wall Mount with Tubular Spouts and 4” (102mm) Wrist Blade Handles
4” (102mm) Wall Mount with Tubular Spouts and Lever Handles Model
Valves
A
B
C
KN45-4106-SE1
Ceramic
KN45-4006-SE1
Compression
6” (152mm)
4-3/8” (111mm)
2-5/8” (67mm)
A
B
C
KN45-4106-SE4
Ceramic
KN45-4006-SE4
Compression
6” (152mm)
4-3/8” (111mm)
2-5/8” (67mm)
8” (203mm)
5-3/8” (136mm)
3-1/8” (79mm)
10” (254mm)
5-13/16” (148mm)
3-9/16” (90mm)
12” (305mm)
6-1/4” (159mm)
4” (102mm)
8” (203mm) Spout
8” (203mm) Spout KN45-4108-SE1
Ceramic
KN45-4008-SE1
Compression
8” (203mm)
5-3/8” (136mm)
3-1/8” (79mm)
KN45-4108-SE4
Ceramic
KN45-4008-SE4
Compression
10” (254mm) Spout
10” (254mm) Spout KN45-4110-SE1
Ceramic
KN45-4010-SE1
Compression
10” (254mm)
5-13/16” (148mm)
3-9/16” (90mm)
KN45-4110-SE4
Ceramic
KN45-4010-SE4
Compression
12” (305mm) Spout
12” (305mm) Spout KN45-4012-SE1
Valves
6” (152mm) Spout
6” (152mm) Spout
KN45-4112-SE1
Model
Ceramic Compression
12” (305mm)
6-1/4” (159mm)
4” (102mm)
KN45-4112-SE4
Ceramic
KN45-4012-SE4
Compression
1” (25mm)
B A
4” (102mm) Wall Mount with Tubular Spouts and Cross Handles Model
Valves
A
B
C 1” (25mm)
6” (152mm) Spout KN45-4106-SE2
Ceramic
KN45-4006-SE2
Compression
6” (152mm)
4-3/8” (111mm)
2-5/8” (67mm)
Swivel Arched Tubular Spouts
8” (203mm)
5-3/8” (136mm)
3-1/8” (79mm)
Model
8” (203mm) Spout KN45-4108-SE2
Ceramic
KN45-4008-SE2
Compression
10” (254mm) Spout KN45-4110-SE2
Ceramic
KN45-4010-SE2
Compression
10” (254mm)
5-13/16” (148mm)
3-9/16” (90mm)
12” (305mm)
6-1/4” (159mm)
4” (102mm)
12” (305mm) Spout KN45-4112-SE2
Ceramic
KN45-4012-SE2
Compression
Double Jointed Cast Spout 4” (102mm) Wall Mount with 13” (330mm) Dbl Jointed Cast Spout and Lever Handles Model
Tel. 1.800.526.3694
C
Valves
4” (102mm) Wall Mount with 9-1/2” (241mm) Swivel Arched Tubular Spouts & Lever Handles Valves
KN45-4109-SE1
Ceramic
KN45-4009-SE1
Compression
4” (102mm) Wall Mount with 9-1/2” (241mm) Swivel Arched Tubular Spouts & Cross Handles Model
Valves
KN45-4109-SE2
Ceramic
KN45-4009-SE2
Compression
4” (102mm) Wall Mount with 9-1/2” (241mm) Swivel Arched Tubular Spouts and 4” Wrist Blade Handles Model
Valves
KN45-4113-DE1
Ceramic
KN45-4109-SE4
KN45-4013-DE1
Compression
KN45-4009-SE4
Fax 1.732.364.8110
Ceramic Compression
www.encoreplumbing.com
53
FOODSERVICE Encore® KN45 Series
8” Wall Mount Faucets with Swivel Gooseneck Spouts • 8” (203mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 8” faucet with built-in check valves to prevent back and cross flow and offer positive seal 1” (25mm)
A
C B
1” (25mm)
3” Gooseneck Spout
8” (203mm) Wall Mount with 3” (76mm) Gooseneck Spout and Lever Handles Model KN45-8100-SE1 KN45-8000-SE1
Valves
A
B
C
Ceramic
3-1/2” (89mm)
8-3/16” (208mm)
5-15/16” (151mm)
Compression
8” (203mm) Wall Mount with 3” (76mm) Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Valves
A
B
C
KN45-8100-SE4
Ceramic
KN45-8000-SE4
Compression
3-1/2” (89mm)
8-3/16” (208mm)
5-15/16” (151mm)
6” Gooseneck Spout 8” (203mm) Wall Mount with 6” (152mm) Gooseneck Spout and Lever Handles Model
Valves
A
B
C
KN45-8102-SE1
Ceramic
KN45-8002-SE1
Compression
6” (152mm)
9-1/16” (230mm)
5-3/8” (137mm)
8” (203mm) Wall Mount with 6” (152mm) Gooseneck Spout and 4” (102mm) Wrist Blade Handles Model
Valves
A
B
C
KN45-8102-SE4
Ceramic
KN45-8002-SE4
Compression
6” (152mm)
9-1/16” (230mm)
5-3/8” (137mm)
8” Gooseneck Spout 8” (203mm) Wall Mount with 8” Gooseneck Spout and 4” (102mm) Wrist Blade Handles
8” (203mm) Wall Mount with 8” Gooseneck Spout and Lever Handles Model
Valves
A
B
C
KN45-8101-SE1
Ceramic
KN45-8001-SE1
Compression
8-1/2” (216mm)
11-15/16” (303mm)
6-3/16” (157mm)
Model
Valves
A
B
C
KN45-8101-SE4
Ceramic
KN45-8001-SE4
Compression
8-1/2” (216mm)
11-15/16” (303mm)
6-3/16” (157mm)
For a complete list of available options see our product configurator on page 136
54
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore® KN45 Series
1” (25mm)
8” Wall Mount Faucets with Tubular and Cast Spouts • 8” (203mm) center • Solid heavy-duty cast bodies • Color coded indexes meet international standards • The only 8” faucet with built-in check valves to prevent back and cross flow and offer positive seal
B A
C
1” (25mm)
Horizontal Tubular Spouts 8” (203mm) Wall Mount with Horizontal Tubular Spout & Lever Handles Model
Valves
A
B
8” Wall Mount with Horizontal Tubular Spout &4” Wrist Blade Handles C
6” (152mm) Spout
Model
Valves
A
B
C
KN45-8106-SE4
Ceramic
KN45-8006-SE4
Compression
6” (152mm)
4-3/4” (121mm)
2-1/2” (64mm)
8” (203mm)
5-1/4” (133mm)
3” (76mm)
10” (254mm)
5-11/16” (144mm)
3-7/16” (87mm)
12” (305mm)
6-1/8” (155mm)
3-7/8” (98mm)
6” (152mm) Spout
KN45-8106-SE1
Ceramic
KN45-8006-SE1
Compression
6” (152mm)
4-3/4” (121mm)
2-1/2” (64mm)
8” (203mm) Spout
8” (203mm) Spout
KN45-8108-SE1
Ceramic
KN45-8008-SE1
Compression
8” (203mm)
5-1/4” (133mm)
3” (76mm)
10” (254mm) Spout
KN45-8108-SE4
Ceramic
KN45-8008-SE4
Compression
10” (254mm) Spout
KN45-8110-SE1
Ceramic
KN45-8010-SE1
Compression
10” (254mm)
5-11/16” (144mm)
3-7/16” (87mm)
12” (305mm) Spout
KN45-8110-SE4
Ceramic
KN45-8010-SE4
Compression
12” (305mm) Spout
KN45-8112-SE1
Ceramic
KN45-8012-SE1
Compression
12” (305mm)
6-1/8” (155mm)
3-7/8” (98mm)
9-1/2” Swivel Arched Tubular Spout 8” (203mm) Wall Mount with 9-1/2” (241mm) Swivel Arched Tubular Spout & Lever Handles Model
Valves
KN45-8109-SE1
Ceramic
KN45-8009-SE1
Compression
8” (203mm) Wall Mount with 9-1/2” (241mm) Swivel Arched Tubular Spout and Cross Handles Model
Valves
KN45-8109-SE2
Ceramic
KN45-8009-SE2
Compression
8” (203mm) Wall Mount with 9-1/2” (241mm) Swivel Arched Tubular Spout & 4” (102mm) Wrist Blade Handle Model
Valves
KN45-8112-SE4
Ceramic
KN45-8012-SE4
Compression
8” Swivel Cast Spout 8” (203mm) Wall Mount with 8” Swivel Cast Spout & Lever Handles Model
Valves
KN45-8108-AE1
Ceramic
KN45-8008-AE1
Compression
8” (203mm) Wall Mount with 8” Swivel Cast Spout & Cross Handles Model
Valves
KN45-8108-AE2
Ceramic
KN45-8008-AE2
Compression
8” (203mm) Wall Mount with 8” Swivel Cast Spout & 4” (102mm) Wrist Blade Handles Model
Valves
KN45-8109-SE4
Ceramic
KN45-8108-AE4
KN45-8009-SE4
Compression
KN45-8008-AE4
Ceramic Compression
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
55
FOODSERVICE
1/2” NPS Female Inlet with 1/2” Nipple and Mounting Hardware
Encore® KN70 Series Wall Mount Faucets
with Swivel and Rigid Tubular, Gooseneck, Cast and Double Jointed Spouts 2-5/8” (67mm)
Spout Length
2-5/8” (67mm) A
B C
1/2” NPS Female Inlet with 1/2” Nipple and Mounting Hardware
1/2” NPS Female Inlet with 1/2” Nipple and Mounting Hardware
Single Wall Mount with Horizontal Swing Spouts and Lever Handle Model KN70-9106 KN70-9006 KN70-9108 KN70-9008 KN70-9110 KN70-9010 KN70-9112 KN70-9012 KN70-9114 KN70-9014 KN70-9116 KN70-9016
12-1/2” 1/2” 8-1/2” NPS Female Inlet with 1/2” Nipple and Mounting Hardware
Compression
Compression
A
1/2” NPS Female(216mm) Inlet with Compression
KN70-9001
With Rigid Gooseneck Spouts
KN70-9100-R
Ceramic
KN70-9000-R
Compression
2-5/8”KN70-9102-R (67mm)
A
B
Ceramic
3-1/2” (89mm)
9” (229mm)
6-1/4” (159mm)
Compression
12-1/2” (318mm)
7” (178mm)
KN70-9101-R
Ceramic 6” 10” 1/2” NPS Female Inlet with (152mm) (254mm) Compression 1/2” Nipple and Mounting Hardware
6” (152mm)
KN70-9001-R
8-1/2” (216mm)
2-5/8” (67mm)
KN70-9002-R
C
6” (152mm)
Spout Size 1/2” NPS FemaleValves Inlet with
12” (305mm)
2-5/8” (67mm)
1/2” Nipple and Mounting Hardware
Ceramic
6” (152mm)
Compression Ceramic
8” (203mm)
1/2” NPS Female Inlet with 1/2” Nipple and Mounting Hardware
Compression
Spout Size 13” (330mm) 18” (457mm)
Valves Ceramic Compression
Single Wall Mount With Double Jointed 18” (457mm) Tubular Spouts and Lever Handle Model
Valves
KN70-9118
Ceramic
KN70-9018
Compression
Ceramic Compression
Two Handle Wall Mount Pot Filler, Cast Spouts 13” (330mm) Reach and Lever Handles Model
Ceramic
Compression
Single Wall Mount Pot Filler with 13” Double Jointed Cast Spout and Lever Handle Model
KN70-9100
Ceramic
Single Wall Mount with Horizontal Cast Swing Spouts and Lever Handle
KN70-9006-TE1
Spout Length
KN70-9101
6” Ceramic 12” 16” (406mm) (152mm) (305mm)
Model
Valves
Ceramic
Compression
14” (356mm)
Model
KN70-9002
1/2” NPS Female Inlet with Ceramic 1/2” Nipple and Mounting Hardware
KN70-9106-TE1
Single Wall Mount with 6” Lever Handle 12” Swivel Gooseneck Spouts(152mm) and (305mm)
Valves
Two Handle Wall Mount Pot Filler, Cast Spouts 18” (457mm) Reach and Lever Handles Model
Valves
KN70-9113-DP1
Ceramic
KN70-9118-DP1
Ceramic
KN70-9013-DP1
Compression
KN70-9018-DP1
Compression
Equivalent to Chicago (515) Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
56
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE Encore KN76 Series Wok Range Faucets with Swing Spouts Wok Range Faucet with Swing Spout Model
Spout Length
Valves
KN76-9010
10” (254mm)
Compression
KN76-9110
10” (254mm)
Ceramic
KN76-9012
12” (305mm)
Compression
KN76-9112
12” (305mm)
Ceramic
Spout Length
Furnished with Wrist Handle
8-1/4” (210mm)
1/2” NPS Male Inlet with Mounting Hardware
Note: Other spout lengths available upon request Replacement valve available KN50-Y007
Encore KN52 and KN65 Series Single and Double Pantry Faucets with Elevated Swing Spouts • 18” (457mm) riser elevates spout 24” (610mm) above deck. • 1/2” NPS male inlet • Single is available with temperature mixing valve. Double Pantry Faucet with Elevated Swing Spout Model
Spout Length
Valves
KN52-9012
12” (305mm)
Compression
KN52-9112
12” (305mm)
Ceramic
Single Pantry Faucet with Elevated Swing Spout KN65-9012
12” (305mm)
Compression
KN65-9112
12” (305mm)
Ceramic
Single Pantry Faucet with Elevated Swing Spout and Temperature Mixing Valve KN65-9012-MV
12” (305mm)
Compression
KN65-9112-MV
12” (305mm)
Ceramic
Note: Other spout lengths available upon request Furnished with 1/4” NPT union tailpiece and mounting hardware
Encore KN58 and KN62 Series Deck Mount Faucets with Elevated Swing Spouts • 4” (102mm) and 8” (203mm) adjustable centers • 18” (457mm) riser elevates spout 24” (610mm) above deck. • 1/2” NPT female inlets 4” (102mm) Adjustable Center Deck Mount Faucet with Elevated Swing Spout Model
Spout Length
Valves
KN58-4012
12” (305mm)
Compression
KN58-4112
12” (305mm)
Ceramic
8” (203mm) Adjustable Center Deck Mount Faucet with Elevated Swing Spout KN62-8012
12” (305mm)
Compression
KN62-8112
12” (305mm)
Ceramic
Note: Other spout lengths available upon request Furnished with 1/2” NPS nipples and mounting hardware
Faucets furnished with both a 2.2 GPM @ 60 PSI water conservation aerator and a bubbler screen spout tip. 1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples and 1-1/4” (32mm) hole for double pantry.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694
Fax 1.732.364.8110
www.encoreplumbing.com
57
FOODSERVICE 3/4” IPS QUIK-FIL™ Heavy-Duty High Volume Commercial Faucets Encore® Quik-Fil™ Pot Sink and Kettle Faucets • Heavy-duty high volume backsplash faucets for quick filling of commercial power pot washing sinks and large volume commercial kettles • 3/4” (19mm) IPS connection provides for full volume water capacity. • Extra large diameter spouts offer unrestricted water flow and fast filling feature. • Convenient and easy to use four post star handles are provided as standard, indexed with hot and cold indicators. • Each model is furnished with eccentric adjustable supply inlets for ease of installation. • Supplied with stainless steel braided hose • KN33/KN34 valve seat requires 3/4” hex wrench.
Exclusive
™
Features: • Quick filling full volume 1” (25mm) diameter spout • Exclusive dual EPDM O-Ring maximizes spout stability, is self-lubricating and designed to withstand extreme temperatures. • Seats and gaskets are accepted industry parts readily available, eliminating costly service repairs. • Quick, smooth turning stems conform to ADA (American Disabilities Act) regulations. • International color coded handles provided. • Heavy-duty spout designed to withstand the rigors of commercial environments. Flow Rate Testing 3/4” (19mm) IPS Kettle Faucet - Model No. KN33-9012 Supply Pressure
Valve Full Open
20 psi (140 kPa)
19 gpm (72 lpm)
30 psi (210 kPa)
24 gpm (91 lpm)
40 psi (280 kPa)
25 gpm (95 lpm)
50 psi (350 kPa)
32 gpm (121 lpm)
60 psi (420 kPa)
35 gpm (132 lpm)
3/4” (19mm) IPS Wall Mount Faucet - Model No. KN34-8012 Supply Pressure
One Valve Full Open
Two Valves Full Open
20 psi (140 kPa)
19 gpm (72 lpm)
32 gpm (121 lpm)
30 psi (210 kPa)
20 gpm (76 lpm)
40 gpm (151 lpm)
40 psi (280 kPa)
24 gpm (91 lpm)
48 gpm (182 lpm)
50 psi (350 kPa)
27 gpm (102 lpm)
50 gpm (189 lpm)
60 psi (420 kPa)
30 gpm (114 lpm)
54 gpm (204 lpm)
For 3/4” pre-rinse units see page 22. for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
58
www.encoreplumbing.com
Tel. 1.800.526.3694
Fax 1.732.364.8110
FOODSERVICE ™ E D C A B Kettle Deck Mount Faucet Model
Spout Length
A
B
C
D
E
KN33-9010
10” (254mm)
2-3/8” (60mm)
10” (254mm)
2-3/4” (70mm)
8-1/8” (206mm)
11-1/8” (283mm)
KN33-9012
12” (305mm)
2-3/8” (60mm)
12” (305mm)
2-3/4” (70mm)
9-1/4” (235mm)
12-1/8” (308mm)
KN33-9018
18” (457mm)
2-3/8” (60mm)
18” (457mm)
2-3/4” (70mm)
11-3/8” (206mm)
14-3/8” (365mm)
KN33-9020
20” (508mm) Dbl Jointed
KN33-9022
22” (559mm) Dbl Jointed
KN33-9028
28” (711mm) Dbl Jointed
A
C
C
D
D
B A
B
F
E
G
Pot Sink Wall Mount Faucet Model
Spout Length
A
B
C
D
E
F
G
KN34-8010
10” (254mm)
10” (254mm)
2-5/8” (67mm)
4-1/2” (114mm)
8-1/4” (210mm)
----
4-5/8” (117mm)
8” (203mm)
KN34-8012
12” (305mm)
12” (305mm)
2-5/8” (67mm)
5-5/8” (143mm)
9-1/4” (235mm)
----
4-5/8” (117mm)
8” (203mm)
KN34-8018
18” (457mm)
18” (457mm)
2-5/8” (67mm)
7-3/4” (197mm)
11-1/2” (292mm)
----
4-5/8” (117mm)
8” (203mm)
KN34-8020
20” (508mm) Dbl Jointed
10” (254mm)
10” (254mm)
9-1/2” (241mm)
13-1/4” (337mm)
20” (508mm)
4-5/8” (117mm)
8” (203mm)
KN34-8022
22” (559mm) Dbl Jointed
10” (254mm)
12” (305mm)
10-5/8” (270mm)
14-1/4” (362mm)
22” (559mm)
4-5/8” (117mm)
8” (203mm)
KN34-8028
28” (711mm) Dbl Jointed
10” (254mm)
18” (457mm)
12-3/4” (324mm)
16-1/2” (419mm)
28” (711mm)
4-5/8” (117mm)
8” (203mm)
Faucets on Page 59 Use the Following 1/4 Turn Cartridges:
KN34-Y006
Hot Valve
KN34-Y007
Cold Valve
KN40-3400
3/4” Mounting Kit
KN34-X009-SS
S/S Seats for 3/4” Faucets
For 3/4” pre-rinse units see page 22. for low lead compliant models change series from “kn” to “kl” and visit our website for current list price. Tel. 1.800.526.3694