High Speed Professional Zoom color camera
22X DSP ZOOM COLOR CAMERA VSC-41(Day & Night)
○ Thank you for using this product. ○ Please read this manual carefully before use, Please keep this instruction manual ○ In a safe place for future reference.
-1-
High Speed Professional Zoom color camera
1.
Purpose
2.
Cautions
3.
Configurations
4.
Set up Menus
5.
Menu Format Table
6.
How to USE Control Key
7.
Interface
8.
Connection Diagram
9.
Dimensions
10. Specifications 11. Protocol 12. Camera Dimensions and Accessories
-2-
High Speed Professional Zoom color camera
1. PURPOSE The 1/4” DSP color CCD X22 ZOOM camera, especially for closed circuit TV and Security surveillance applications. - DSP color camera for PAN/TILT&ZOOM controller. - High resolution 1/4” color CCD pick-up device. - High durability built in X22 optical power zoom lens. - OSD function. - AGC. - Total zoom ratio X268 [Digital zoom X12,optical zoom X22] - Variable zoom ratio. - 470TV lines at center. - Min. illumination at 0.01Lux (F=1.6). - Back-light compensation. - External synchronization with line-lock [optional] - Wired remote controller [optional]
-3-
High Speed Professional Zoom color camera
2. CAUTIONS Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1) Power supply - Use only with the +12V DC regulated power supply marked Class 2. - Be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and / or damage to video camera. 2) Operating and storage location. - Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear irrespective of whether the camera is operating or not. This may damage the CCD. - Do not place the camera in the following locations. Locations subjected to extremely high or low temperatures. Locations subjected to high levels of humidity and dust. Locations where are large amount of water vapor and steam. Locations subjected to excessive vibrations. - When this camera is installed near equipment, like a wireless communication device that emits a strong electromagnetic field, some irregularity such as noise on the monitor screen may happen. 3) Handling of the unit Do not allow the camera to be subjected to strong impacts or shocks. The camera could be damaged by improper handling or storage. - Never attempt to disassemble or modify the camera. - If an abnormality should occur, immediately turn off the power and consult your dealer.
-4-
High Speed Professional Zoom color camera
3.CONFIGURATION POWER LED BNC JACK (VIDEO OUTPUT)
TELE SWITCH
POWER
T
N VIDEO
NEAR SWITCH FAR SWITCH
F MENU
Z F C M
WIDE SWITCH
W
POWER CONNECTOR S-VIDEO +12V GND
ZFCM CONNECTOR Z : Zoom Signal Input Pin F : Focus Signal Input Pin C : Common (GND) M : Menu
S-VIDEO SWITCH or
CONTROL
MENU MOVING TO SETUP MENU
TELE SWITCH ZOOM-IN THE SCREEN (The view angle becomes narrow but the size of a subject in the screen becomes bigger)
NEAR SWITCH Focusing near (To focus on the image of near subject manually)
FAR SWITCH Focusing far (To focus on the image of far subject manually)
ZFCM CONNECTOR BNC JACK (VIDEO OUTPUT) Connector for video cable adoption BNC type
S-VIDEO It is used to see high quality picture. You must be sure that there is S-VIDEO connector on the monitor and S-VIDEO cable
-5-
High Speed Professional Zoom color camera
CONTROL It is 6 or 12 Pin circle connector. Wire Controller connector.
POWER CONNECTOR Use only constant DC 12V 500mA adapter.
POWER
Z F C M
POWER
T
N VIDEO
VIDEO
W
S-VIDEO
Z F C M
POWER
T
N
F MENU
S-VIDEO TYPE
VIDEO
W
CONTROL +12V GND
T
N
F MENU
F MENU W
S-VIDEO +12V GND
REMOTE CONTROL TYPE
-6-
CONTROL
REMOTE CONTROL & S-VIDEO TYPE
High Speed Professional Zoom color camera Generally how to control P.T.Z is the same as how to control Remote Control.
Pan Tilt Zoom P.T.Z is not included
ZOOM PULSE TELE
ZOOM
WIDE
ZOOM
GND
FOCUS PULSE NEAR
FOCUS
FAR
FOCUS
GND
Press WIDE and FAR button together to open/close MENU window on the screen.
-7-
High Speed Professional Zoom color camera
4. SETUP MENU SETUP MENU REVIEW & CONFIGURATION CHART.
MENU
SUB-MENU AUTO
FOCUS
MANUAL ON
BLC
OFF AUTO SHUTTER
AE
IRIS AGC MANUAL
MAIN
AUTO
IRIS
F1.6-F32 AUTO
SHUTTER
NORMAL AUTO
AGC
0DB-22DB
W/B
AWB WAWB MANUAL[R,B] OFF
NEGA
ON OFF
B/W EFFECT
ON OFF
MIRROR
ON OFF
FREEZE
ON
BRIGHT
20 [0-48]
SHARP
10 [0-20]
-8-
High Speed Professional Zoom color camera ID
000-255 OFF
D-ZOOM SYSTEM
ON OFF
OSD
ON INT
SYNC
L/L [OPTION]
FACTORY
DEFAULT
-9-
High Speed Professional Zoom color camera
5. MENU FORMAT TABLE 1) NEGA/POS: Use to change NEGATIVE and POSITIVE mode. * ON: NEGATIVE mode, OFF: POSITIVE mode. 2) B/W, COLOR: Use to change color and monochrome of picture. * ON: COLOR mode, OFF: BLACK and WHITE mode. 3) MIRROR: When image mirror is ON state, the image is displayed in the opposite direction. 4) FREEZE: Used to change real picture and digital picture. * ON: Digital picture, OFF: Real picture. 5) WB: AWB: Maintain best color condition by controlling the change of color automatically.[2800K – 8000K] * WAWB: Can find white balance exactly in case precise WB Maintenance is needed under any environment. 6) SHUTTER: Use to select the shutter speed 28 steps. 7) ID: To connect a large number of cameras, identification number can be assigned to each camera control easily. 8) BRIGHTNESS: Use to change the brightness of scene.[0-48] 9) SHARPNESS: Use to change the sharpness of scene.[0-20] 10) FACTORY: Set the initial mode ON, the changed data are renewed reset the data to its shipping condition. 11) WAIT MODE: Indicates the camera stand-by mode until the camera power ON
- 10 -
High Speed Professional Zoom color camera
6. HOW TO USE CONTROL KEY There are 5 buttons on the rear side of the camera. These buttons are used to set setup menu and values. And each button has different functions up to the menu and they are described as followings.
T
N
F MENU W
1) ZOOM BUTTON [T, W] - T (TELE): “T” is button for zoom in function which makes the image of the subject nearer and bigger. - W (WIDE): “W” is button for zoom out function which makes the image of the subject farther and smaller.
2) FOCUS BUTTON [N, F] -N (NEAR) BUTTON: “N” is button for focusing nearer with the same view of angle. -F (FAR) BUTTON: “F” is button for focusing farther with the same view of angle
3) MENU BUTTON (at the center) A button to open or close setup menu
4) FUNCTION MENU [MAIN, EFFECT, SYSTEM] “T” or “W” button to select effect and system after menu is button state.
5) FUNCTION DATA [N, F] This button is used for data adjust.
6) MENU DATA [T, W] This button is used for down or up in the menu mode.
- 11 -
High Speed Professional Zoom color camera
7. INTERFACE 1) 2)
POWER
VIDEO
W
S-VIDEO
Z F C M
POWER
T
N
F MENU
Z F C M
POWER
T
N VIDEO
3)
1) 2)
MENU
S-VIDEO TYPE
F MENU
VIDEO
W
CONTROL +12V GND
T
N
F
W
S-VIDEO CONTROL
+12V GND
REMOTE CONTROL TYPE
REMOTE CONTROL & S-VIDEO TYPE
1) J1 [6P] PIN NO.
NAME
1
TXD
I/O SIGNAL RS-232
2
RXD
RS-232
3
GND
GND
4
KEY2
ADKEY
5
485(B)
RS-485(-)
6
485(A)
RS-485(+)
2) J2 [4P] PIN NO.
NAME
1
ZOOM T W
DC Control
I/O SIGNAL
2
FOCUS N F
DC Control
3
COMMON
4
MENU
DC Control
- 12 -
High Speed Professional Zoom color camera
3) Control [12P] PIN NO.
NAME
I/O SIGNAL
Color
1
TXD
RS-232C Transmitter Port
Yellow
2
RXD
RS-232C Receiver Port
Orange
3
COM
Zoom & Focus DC Control
Brown
4
FOCUS
Zoom & Focus DC Control
Black
5
ZOOM
Zoom & Focus DC Control
Gray
6
GND
Ground
Blue
7
GND
Ground
Green White
8
+5V
DC 5V
9
+12V
Power Supply Input
Red
10
KEY2
ADKEY2
Beige
11
KEY1
ADKEY1
Purple
12
GND
Ground
Pink
3) Control 6P] PIN NO.
NAME
I/O SIGNAL
Color
1
ZOOM
Zoom & Focus DC Control
Yellow
2
FOCUS
Zoom & Focus DC Control
Orange
3
COM
Zoom & Focus DC Control
Brown
4
MENU
Zoom & Focus DC Control
Black
5
GND
Ground
Gray
6
+12V
Power Supply Input
Blue
- 13 -
High Speed Professional Zoom color camera
8. CONNECTION DIAGRAM 1.
CONNECTION WITH MONITOR
Cable: 1.8M
MONITOR CAMERA
2.
POWER [+12V]
REMOTE CONTROL IS OPTION
CONNECTION WITH MONITOR
WHEN PANTILT IS INSTALLED
No1. Camera (video)
RS-485 BUS MONITOR1
POWER [+12V]
- 14 -
High Speed Professional Zoom color camera
9. DIMENSION 118
62
100
55.8 COLOR DSP CAMERA
OPTICA L POWER ZOO M
POWER
VIDEO
Z F C M
POWER
T
N
POWER
MENU
VIDEO
W
Z F C M
MENU
+12V GND
S-VIDEO TYPE
VIDEO
F MENU W
CONTROL
S-VIDEO
T
N
F
S-VIDEO +12V GND
REMOTE CONTRO L TYPE
- 15 -
REMOTE CONTROL & S-VIDEO TYPE
High Speed Professional Zoom color camera
10. SPECIFICATION MODEL Signal Format
VSC-41 NTSC
PAL
Scanning System
2 : 1 Interlace
Scanning Frequency (H)
15.734 KHz
Scanning Frequency (V)
59.94 Hz
Pick-Up Device
15.625 KHz 50 Hz 1/4" SONY HAD CCD
Total Pixels Number
811 (H) x 494 (V) 410K
795 (H) x 596 (V) 470K
Picture Element
768 (H) x 494 (V)
752 (H) x 582 (V)
S/N Ratio
More Than 48dB More Than 470TV Lines
Horizontal Resolution Lens
More Than 470TV Lines X22 Zoom
[3.9mm~85.8mm,F1.6(W)~F3.7(T)]
Minimum Illumination 0.01 Lux (40 IRE) F1.6 Digital Zoom Ration
Basic x 12 (Total Zoom Ration x 268 X2 ~ X12 Variable
Sync System
Internal
OSD (On Screen Display)
OSD On / Off
Video Output
Composite Output 75Ω Terminated
Camera Control
RS-485 / RS-232C
Day & Night
Auto
Focus Mode F
Brightness
u
Control
n
Sharpness
c
Control
Auto / Manual Manual (Brightness Up / Down) Manual (Sharpness Up / Down)
t
Iris Control
Auto / Manual (Iris Up / Down)
i
AGC Control
Auto / Manual (0~ 22 dB Control)
o n
Shutter Speed White Balance
1/60 ~ 1/10,000 Sec
1/50 ~ 1/10,000 Sec
AWB / WAWB / Indoor / Outdoor / Manual
Back Light
On / Off
Compen. Negative /
Negative On /Off
Positive
- 16 -
High Speed Professional Zoom color camera Freeze
On / Off
Operation Temperature
-10 ~ 50°C
Operation Humidity Storage Temperature Supplied Voltage
0 ~ 80% RH -20 ~ 60°C,
0 ~ 85% RH
7~16V (Recommendable Voltage: 12V ± 10%)
Power Consumption
Max. 4.8W
Dimensions (W x H x D)
55.8X 62 x 100
Weight
350g
- 17 -
High Speed Professional Zoom color camera
11. PROTOCOL T.G. WIN Protocol List [2003.12.23] (For RS-232C / RS-485) (1). CONNECTION CONDITION - Baud Rate : 9600 BPS - Data bit: 8 Bits - Parity bit: None - Stop bit: 1 Bits - Flow control: None (2). COMMUNICATION FORMAT Normal Command 1) PC=>Camera BYTE 1 0xA0
BYTE 2 ID
BYTE 3
BYTE 4
••••••
BYTE N
CODE 1
CODE 2
••••••
0xFF
Description BYTE1: 0xA0 - Camera is realized the protocol comes from PC. BYTE2: Camera’s ID(Identification) number to communicate (0-255). In case of difference between this value of CAM_ID and the given value of camera’s ID, It is impossible to communicate wide. BYTE3: The Kind of Command. BYTE4: The Kind of Sub-Command. BYTE5: The changed data according to PC Command, if necessary. BYTE N: 0xFF - End of Protocol (Byte2 can be 0xFF:
If N>2 & 0xFF, The Protocol is ended)
2) Camera->PC (Return Acknowledge) BYTE 1 0xA0
BYTE 2 ID
BYTE 3
BYTE 4
0x04
0xFF
Request Command 1) PC=>Camera BYTE 1
BYTE 2
BYTE 3
BYTE 4
••••••
BYTE N
0xA1
ID
CODE 1
CODE 2
••••••
0xFF
- 18 -
High Speed Professional Zoom color camera 2) Camera->PC -Return Mode ‘On’ status BYTE 1
BYTE 2
BYTE 3
BYTE 4
0XA1
ID
0x07
0xFF
-Return Mode ‘Off’ status BYTE 1
BYTE 2
BYTE 3
BYTE 4
0xA1
ID
0x08
0xFF
-Return Request Data Description BYTE 1
BYTE 2
BYTE 3
BYTE 4
••••••
BYTE N
0xA1
ID
0x09
DATA 1
••••••
0xFF
BYTE1: 0xA1 - PC is realized the protocol comes from Camera. BYTE2: Camera’s ID (Identification) number to communicate (0-255). In case of difference between this value of CAM_ID and the given value of camera’s ID, It is impossible to communicate wide. BYTE3: The Kind of Return Value 0x04: Acknowledge. 0x07: The Request Mode is on. 0x07: The Request Mode is off. 0x09: The Request Mode’s Data is Return. BYTE4: The Higher 4bit Data is received from PC (0x0P), if necessary. BYTE5: The Lower 4bit Data is received from PC (0x0Q), if necessary. (BYTE4PC 0xA0
ID
MODE: In case of MODE = 0x00, The FOCUS mode is changed between “AUTO” and “MANUAL.” In case of MODE = 0x01, The FOCUS mode becomes “AUTO” mode. In case of MODE = 0x02, The FOCUS mode becomes “MANUAL” mode. ZOOM & FOCUS Move Setting Move the zoom and focus lens to TELE, WIDE, NEAR and FAR according to the data of ‘MODE’. Caution: After using the Lens Move action, Camera has to be notified by stop action code ‘STOP’. 1) PC=>Camera 0Xa0
ID
0x 00
MODE
0xFF
2) Camera->PC 0xA0
ID
0x04
0xFF
MODE In case of MODE = 0x10, The ZOOM and FOCUS lens STOP. In case of MODE = 0x11, The FOCUS lens move to “NEAR.” In case of MODE = 0x12, The FOCUS lens move to “FAR.” In case of MODE = 0x13, The ZOOM lens move to “TELE.” In case of MODE = 0x14, The ZOOM lens move to “WIDE.” Digital Zoom Mode ON/OFF Setting Switch the Digital Zoom mode to ON or OFF according to the data of ‘MODE’. 1) PC=>Camera 0xA0
ID
0x 00
MODE
0x04
0xFF
0xFF
2) Camera->PC 0xA0
ID
MODE: In case of MODE = 0x20, The Digital Zoom Mode is changed between “ON” and “OFF”. In case of MODE = 0x21, The Digital Zoom Mode is changed to “ON” mode. In case of MODE = 0x22, The Digital Zoom Mode is changed to “OFF” mode.
- 21 -
High Speed Professional Zoom color camera ### AWB ### White Balance Mode Set Command; Set the mode of White Balance according to WB_CNT. 1) PC=>Camera 0xA0
ID
0x 01
WB_CNT
0xFF
2) Camera->PC 0xA0
ID
0x04
0xFF
WB_CNT: This is a counter to change the mode of White Balance In case of WB_CNT = 0x01, the mode of White Balance becomes a “AWB” mode In case of WB_CNT = 0x02, the mode of White Balance becomes a “AWC” mode In case of WB_CNT = 0x03, the mode of White Balance becomes a “INDOOR” mode In case of WB_CNT = 0x04, the mode of White Balance becomes a “OUTDOOR” mode In case of WB_CNT = 0x05, the mode of White Balance becomes a “MANUAL” mode R-Gain and B-Gain Data Set Command; Set the data of White Balance Gain to DATA. 1) PC=>Camera 0xA0
ID
0x 01
COLOR
0x04
0xFF
0x0P
0x0Q
0xFF
2) Camera->PC 0xA0
ID
COLOR: In case of COLOR = 0x10, the R-GAIN of White Balance becomes 0xPQ. In case of COLOR = 0x20, the B-GAIN of White Balance becomes 0xPQ. ### AE ### Exposure Mode Set Command; Set the mode of Exposure according to AEmodeCNT. 1) PC=>Camera 0xA0
ID
0x 02
AEmodeCNT
0x04
0xFF
0xFF
2) Camera->PC 0xA0
ID
a) AEmodeCNT.: The counter for setting Exposure mode In case of AEmodeCNT.= 0x01, the Exposure mode becomes a “AUTO” mode In case of AEmodeCNT.= 0x02, the Exposure mode becomes a “SHUTTER PRI” mode In case of AEmodeCNT.= 0x03, the Exposure mode becomes a “IRIS PRI” mode In case of AEmodeCNT.= 0x04, the Exposure mode becomes a “AGC PRI” mode In case of AEmodeCNT.= 0x05, the Exposure mode becomes a “MANUAL” mode IRIS POSITION Set Command; Set the Iris Position. 1) PC=>Camera 0xA0
ID
0x 02
0x10
0x0P
- 22 -
0x0Q
0xFF
High Speed Professional Zoom color camera 2) Camera->PC 0xA0
ID
0x04
0xFF
0xPQ: 0x00 ~0x0A 0xPQ: 0x00(CLOSE), 0x01(F32), 0x02(F22), 0x03(F16), 0x04(F11), 0x05(F8), 0x06(F5.6), 0x07(F4), 0x08(F2.8), 0x09(F2), 0x0A (F1.6) SHUTTER POSITION Set Command; Set the Shutter Speed. 1) PC=>Camera 0xA0
ID
0x 02
0x20
0x04
0xFF
0x0P
0x0Q
0xFF
2) Camera->PC 0xA0
ID
0xPQ: 0x00~ 0x08 0xPQ (NTSC): 0x00(1/60),0x01(1/100),0x02(1/125),0x03(1/250),0x04(1/500),0x05(1/1000),0x06(1/2000), 0x07(1/4000), 0x08(1/10000) 0xPQ (PAL): 0x00(1/50),0x01(1/100),0x02(1/120),0x03(1/250),0x04(1/500),0x05(1/1000),0x06(1/2000), 0x07(1/4000), 0x08(1/10000) AGC GAIN Set Command; Set the AGC Gain. 1) PC=>Camera 0xA0
ID
0x 02
0x30
0x04
0xFF
0x0P
0x0Q
0xFF
2) Camera->PC 0xA0
ID
0xPQ: 0x00~ 0x16 0xPQ: 0x00(0dB) ~ 0x16(22dB)
*(22 = 0x16)
### FUNCTION ### FUNCTION MODE Set Command; Set the mode of Exposure according to CODE. 1) PC=>Camera 0Xa0
ID
CODE
0x 03 FUNC.
0xFF MODE
2) Camera->PC 0xA0
ID
0x04
0xFF
CODE: In case of CODE = 0x00, The FUNCTION mode becomes normal status.
- 23 -
High Speed Professional Zoom color camera FUNC: Higher 4Bit of CODE In case of FUNC = 1, The B/W Function mode is changed. In case of FUNC = 2, The MIRROR Function mode is changed. In case of FUNC = 3, The POSI/NEGA Function mode is changed. In case of FUNC = 4, The FREEZE Function mode is changed. In case of FUNC = 5, The FREEZE MODE is changed.
MODE: Lower 4Bit of CODE In case of MODE = 0, The FUNCTION is changed between “ON” and “OFF”. In case of MODE = 1, The FUNCTION mode becomes “ON” mode. In case of MODE = 2, The FUNCTION mode becomes “OFF” mode. *(REFFER THE TABLE OF COMMAND LIST) ### CAMERA SET ### CAMERA MODE Set Command; Set the mode of Camera according to CODE. 1) PC=>Camera 0Xa0
ID
0x 04
CODE FUNC.
0xFF MODE
2) Camera->PC 0xA0
ID
0x04
0xFF
CODE: FUNC Higher 4Bit of CODE In case of FUNC = 0, The SYNC mode is changed. In case of FUNC = 1, The DISPLAY mode is changed. In case of FUNC = 2, The BLC mode is changed. In case of FUNC = 3, The SHARPNESS is changed. In case of FUNC = 4, The BRIGHTNESS is changed. In case of FUNC = 5, The CAMERA MODE is Initialized to default. MODE: Lower 4Bit of CODE In case of MODE = 0, The FUNCTION is changed between “ON” and “OFF”. In case of MODE = 1, The FUNCTION mode becomes “ON” or “UP” mode. In case of MODE = 2, The FUNCTION mode becomes “OFF” or “DOWN” mode.
- 24 -
High Speed Professional Zoom color camera *(REFFER THE TABLE OF COMMAND LIST) ### KEY ### KEY ACTION Setting; Perform the key action according to the data of ‘KEY_NUM’. Caution: After using the Key action, Camera has to be notified by stop action code ‘STOP’. 1) PC=>Camera 0xA0
ID
0x 05
KEY_NUM
0x04
0xFF
0xFF
2) Camera->PC 0xA0
ID
KEY_NUM: In case of KEY_NUM = 0x00, “STOP” all key action that are being performed currently. In case of KEY_NUM = 0x10, Switch the main “MENU” (On/OFF) In case of KEY_NUM = 0x21, Decrease the data of a selected item on the main MENU. In case of KEY_NUM = 0x22, Increase the data of a selected item on the main MENU. In case of KEY_NUM = 0x31, Scroll “UP” the MENU item. In case of KEY_NUM = 0x32, Scroll “DOWN” the MENU item. ### PRESET ### Memorize Zoom Lens Position for PRESET control: Memorize the Zoom lens position into Buffer RAM designed PRESET position 1) PC=>Camera 0xA0
ID
0x 07
0x01
0x04
0xFF
ZOOMH
ZOOML
DZOOM
0xFF
2) Camera->PC 0xA0
ID
ZOOM POSITION= ZOOMHPC
- 25 -
FOCUSL
0xFF
High Speed Professional Zoom color camera 0xA0
ID
0x04
0xFF
FOCUS POSITION= FOCUSHPC 0xA0
ID
0x04
0xFF
### REQUEST COMMAND ### CAMERA STATUS READ Read the current ‘FUNCTION’ State of the Camera. The return data is ‘M_STATE’. 1) PC=>Camera 0xA1
ID
0x 00
FUNCTION
0x09
M_STATE
0xFF
2) Camera->PC 0xA1
ID
0xFF
FUNCTION: In case of FUNCTION = 0x01, Read the “DISPLAY” On/Off state. M_STATE = 0x07: DISPLAY ON M_STATE = 0x08: DISPLAY OFF M_STATE = 0x09: DISPLAY PUSHON In case of FUNCTION = 0x02, Read the “D_ZOOM” On/Off state. M_STATE = 0x07: D_ZOOM ON M_STATE = 0x08: D_ZOOM OFF In case of FUNCTION = 0x03, Read the “FOCUS” AF/MF state. M_STATE = 0x01: AF M_STATE = 0x02: MF
- 26 -
High Speed Professional Zoom color camera READ THE WHITE BALANCE MODE Read the current White Balance Mode of the Camera. The return data is “WB_MODE”. 1) PC=>Camera 0Xa1
ID
0x 01
0x 10
0x09
0x0P
0xFF
2) Camera->PC 0xA1
ID
0x0Q
0xFF
“WB_MODE” = 0xPQ - Explanation of “WB_MODE” data WB_MODE
EXPLANATION
0x01
AUTO White Balance mode
0x 02
WIDE AUTO White Balance mode
0x 03
MANUAL White Balance mode
0x 04
INDOOR White Balance mode
0x 05
OUTDOOR White Balance mode
READ THE R-GAIN DATA OF WHITE BALANCE Read the current R-Gain of white Balance. 1) PC=>Camera 0xA1
ID
0x 01
0x 20
0x09
0x0P
0xFF
2) Camera->PC 0xA1
ID
0x0Q
0xFF
R-GAIN = 0xPQ (0x00 ~0xFF) READ THE B-GAIN DATA OF WHITE BALANCE Read the current B-Gain of white Balance. 1) PC=>Camera 0xA1
ID
0x 01
0x 20
0x09
0x0P
0xFF
2) Camera->PC 0xA1
ID
0x0Q
0xFF
B-GAIN = 0xPQ (0x00 ~0xFF) READ THE EXPOSURE MODE Read the Exposure Mode of the Camera. The return data is “AE_MODE”. 1) PC=>Camera 0xA1
ID
0x 02
0x 00
0xFF
- 27 -
High Speed Professional Zoom color camera 2) Camera->PC 0xA1
ID
0x09
0x0P
0x0Q
0xFF
“AE _MODE” = 0xPQ - Explanation of “AE_MODE” data AE_MODE
EXPLANATION
0x01
AUTO Exposure mode
0x02
MANUAL Exposure mode
0x03
IRIS Primary Exposure mode
0x04
SHUTTER Primary Exposure mode
0x05
AGC Primary Exposure mode
BLC STATUS READ Read the current ‘BLC’ State of the Camera. The return data is ‘M_STATE’. 1) PC=>Camera 0xA1
ID
0x 02
0x10
0x09
M_STATE
0xFF
2) Camera->PC 0xA1
ID
0xFF
M_STATE: In case of
M_STATE = 0x07: BLC ON
In case of
M_STATE = 0x08: BLC OFF
IRIS POSITION READ Command; Read the Iris Position. 1) PC=>Camera 0xA1
ID
0x 02
0x 03
0x09
0x0P
0xFF
2) Camera->PC 0xA1
ID
0x0Q
0xFF
IRIS POSITION= 0xPQ (0x00 ~0xFF) 0xPQ: 0x00(CLOSE), 0x01(F32), 0x02(F22), 0x03(F16), 0x04(F11), 0x05(F8), 0x06(F5.6), 0x07(F4), 0x08(F2.8), 0x09(F2), 0x0A (F1.6) SHUTTER POSITION Read Command; Read the Shutter Speed. 1) PC=>Camera 0xA1
ID
0x 02
0x 04
0x09
0x0P
0xFF
2) Camera->PC 0xA1
ID
0x0Q
IRIS POSITION= 0xPQ (0x00 ~0xFF)
- 28 -
0xFF
High Speed Professional Zoom color camera 0xPQ (NTSC): 0x00(1/60), 0x01(1/100), 0x02(1/125), 0x03(1/250), 0x04(1/500), 0x05(1/1000), 0x06(1/2000), 0x07(1/4000), 0x08(1/10000) 0xPQ (PAL): 0x00(1/50),0x01(1/100),0x02(1/120),0x03(1/250),0x04(1/500),0x05(1/1000),0x06(1/2000), 0x07(1/4000), 0x08(1/10000)
AGC GAIN Read Command; Read the AGC Gain. 1) PC=>Camera 0xA1
ID
0x 02
0x 05
0x09
0x0P
0xFF
2) Camera->PC 0xA1
ID
0x0Q
0xFF
AGC POSITION= 0xPQ (0x00 ~0x16) 0xPQ: 0x00(0dB) ~ 0x16(22dB)
*(22 = 0x16)
ZOOM LENS POSITION Read: Read the current value of Zoom lens and Dzoom. 1) PC=>Camera 0xA1
ID
0x 07
0x 01
0x09
ZOOMH
0xFF
2) Camera->PC 0xA1
ID
ZOOML
DZOOM
ZOOM POSITION= ZOOMHPC 0xA1
ID
FOCUSL
- 29 -
0xFF
0xFF
High Speed Professional Zoom color camera FOCUS POSITION= FOCUSH PC
Comments
AUTOMANUAL
A0 ID 00 00 FF
A0 ID 04 FF
Focus condition
AUTO
A0 ID 00 01 FF
A0 ID 04 FF
MANUAL
A0 ID 00 02 FF
A0 ID 04 FF
STOP
A0 ID 00 10 FF
A0 ID 04 FF
NEAR
A0 ID 00 11 FF
A0 ID 04 FF
Set AF
WB
FAR
A0 ID 00 12 FF
A0 ID 04 FF
TELE
A0 ID 00 13 FF
A0 ID 04 FF
Lens Move
WIDE
A0 ID 00 14 FF
A0 ID 04 FF
D.ZOOM ONOFF
A0 ID 00 20 FF
A0 ID 04 FF
Digital
D.ZOOM ON
A0 ID 00 21 FF
A0 ID 04 FF
condition
zoom
D.ZOOM OFF
A0 ID 00 22 FF
A0 ID 04 FF
AWB
A0 ID 01 01 FF
A0 ID 04 FF
White balance
AWC
A0 ID 01 02 FF
A0 ID 04 FF
Condition.
MANUAL
A0 ID 01 03 FF
A0 ID 04 FF
INDOOR
A0 ID 01 04 FF
A0 ID 04 FF
OUTDOOR
A0 ID 01 05 FF
A0 ID 04 FF
R GAIN
A0 ID 01 10 0P 0Q FF
A0 ID 04 FF
Setting
R
gain
B
gain
(PQ:00-FF) B GAIN
A0 ID 01 20 0P 0Q FF
A0 ID 04 FF
Setting (PQ:00-FF)
AE
AUTO
A0 ID 02 01 FF
A0 ID 04 FF
Auto
MANUAL
A0 ID 02 02 FF
A0 ID 04 FF
condition
IRIS MANUAL
A0 ID 02 03 FF
A0 ID 04 FF
SHHUTTER MANUAL
A0 ID 02 04 FF
A0 ID 04 FF
AGC MANUAL
A0 ID 02 05 FF
A0 ID 04 FF
- 30 -
exposure
High Speed Professional Zoom color camera IRIS OUT
A0 ID 02 10 0P 0Q FF
A0 ID 04 FF
PQ : 0x00 – 0x0A PQ: 0(CLOSE)
1(F32)
2(F22) 3(F16) 4(F11) 5(F8) 6(F5.6) 7(F4) 8(F2.8) 9(F2) A(F1.6) SHUTTER OUT
A0 ID 02 20 0P 0Q FF
A0 ID 04 FF
PQ : 0 – 8 PQ(NTSC): 0(60) 1(100) 2(125) 3(250)
4(500)
5(1000)
6(2000)
7(4000) 8(10000)
PQ(PAL): 0(50) 1(100) 2(120) 3(250)
4(500)
5(1000)
6(2000)
7(4000) 8(10000)
AGC OUT
A0 ID 02 30 0P 0Q FF
A0 ID 04 FF
PQ : 0x00 –0x16
PQ: 0x00(0Db) ~ 0x16(22 dB) FUNCTION
PICTURE EFFECT OFF
A0 ID 03 00 FF
A0 ID 04 FF
B/W ON/OFF
A0 ID 03 10 FF
A0 ID 04 FF
B/W ON
A0 ID 03 11 FF
A0 ID 04 FF
B/W OFF
A0 ID 03 12 FF
A0 ID 04 FF
MIRROR ON/OFF
A0 ID 03 20 FF
A0 ID 04 FF
MIRROR ON
A0 ID 03 21 FF
A0 ID 04 FF
MIRROR OFF
A0 ID 03 22 FF
A0 ID 04 FF
POSITIVE/NEGATIVE
A0 ID 03 30 FF
A0 ID 04 FF
NEGATIVE
A0 ID 03 31 FF
A0 ID 04 FF
POSITIVE
A0 ID 03 32 FF
A0 ID 04 FF
FREEZE ON/OFF
A0 ID 03 40 FF
A0 ID 04 FF
FREEZE ON
A0 ID 03 41 FF
A0 ID 04 FF
- 31 -
High Speed Professional Zoom color camera FREEZE OFF
A0 ID 03 42 FF
A0 ID 04 FF
FREEZE FIELD/FRAME
A0 ID 03 50 FF
A0 ID 04 FF
FREEZE FIELD
A0 ID 03 51 FF
A0 ID 04 FF
FREEZE FRAME
A0 ID 03 52 FF
A0 ID 04 FF
CAMERA
SYNC INT/LINE LOCK
A0 ID 04 00 FF
A0 ID 04 FF
SET
SYNC INT
A0 ID 04 01 FF
A0 ID 04 FF
SYNC LINE LOCK
A0 ID 04 02 FF
A0 ID 04 FF
DSPLAY ON/OFF/PUSH
A0 ID 04 10 FF
A0 ID 04 FF
DSPLAY ON
A0 ID 04 11 FF
A0 ID 04 FF
DSPLAY OFF
A0 ID 04 12 FF
A0 ID 04 FF
DSPLAY PUSHON
A0 ID 04 13 FF
A0 ID 04 FF
BLC ON/OFF
A0 ID 04 20 FF
A0 ID 04 FF
Back
BLC ON
A0 ID 04 21 FF
A0 ID 04 FF
condition
BLC OFF
A0 ID 04 22 FF
A0 ID 04 FF
SHARPNESS SET
A0 ID 04 30 0P 0Q FF
A0 ID 04 FF
light
control
SHARPNESS
:
0xPQ(