EC200/210/220/221-BT Installation Guide
Package Contents • 1 system unit • 1 HDD drive bay kit • Terminal blocks • 1 Quick Installation Guide • 1 CD disk includes: - Drivers / Manual
Note: The CD that came with the system contains an autorun screen to install drivers, utilities, and software applications required to enhance the performance of the system and a user's manual for your reference. Insert the CD into a CD-ROM drive. The autorun screen will appear. If after inserting the CD, “Autorun” did not automatically start, please go directly to the root directory of the CD and double-click “Setup”. Please install all required drivers. DFI reserves the right to change the specifications at any time prior to the product's release. For the latest revision and for more details of the installation process, please refer to the user's manual on the website. www.dfi.com 1
Installing a 2.5" SATA Drive 1. First, use the 5 provided mounting screws to secure the protective plate in place on the system board.
Mounting Screws Protective plate
Heat-dissipating plate
2
2. Align the mounting holes of the SATA drive with the mounting holes on the HDD brackets and then use the provided mounting screws to secure the drive in place.
SATA drive
HDD bracket
Mounting screw
3
3. Place the SATA drive (with HDD brackets) into the system. Align the mounting holes on the HDD brackets with the mounting holes on the heat-dissipating plate and then use the provided mounting screws to secure the drive in place.
Mounting hole HDD bracket
Mounting screw
4
4. Connect A to the SATA data/power connector on the SATA drive, B and C to the SATA power connector and the SATA data connector respectively on the system board.
SATA data/power connector (A)
SATA power connector (B) SATA data connector (C)
SATA data/power connector (A)
SATA power connector (B) SATA data connector (C)
SATA power connector SATA data connector
SATA data/power connector
5
Board Layout and Jumper Settings Power Button 1
Reset
CPU Fan
Front Panel 1
2
Alert LED HDD LED 6
COM 1 COM 2 COM 3
(JP13) (JP17) COM2 RS232/422/485 Select (JP25) (JP26) (JP19) COM3 RS232/422/485 Select (JP27) (JP28) COM2 RS232/Power Select (JP16) COM3 RS232/Power Select (JP18)
1
4
5
(JP14)2 1
1
6 5
SATA 1
(JP24) (JP15) 2
6 2 1
1
5
2
1 6
1
5
6 5
10
3
1
LAN 2
12
S/PDIF 1
3
2
6
1
5
2
6
2 1
6 5
9
2 1
Parallel
2 1
6 5
(JP20)
USB 4-5 USB 2.0
USB 11 (optional) USB 2.0
EXC
Digital I/O 11/13/15/17 (JP5) Output State Digital I/O 3/5/7/9 (JP6) Output State Digital I/O Power Select (JP7)
DDR3L_2 SODIMM
COM 5
5
SMSC USB4604 SPI Flash BIOS
(JP30) (JP21) 1
USB 0-1 Power Select (JP1)
10
(JP13) 26 25
6 5
6
1
6
5 2 (JP29) 1
2
USB 1 USB 0
USB 3.0
COM 6
(JP28)
USB 2.0
Clear CMOS Data (JP4) 1
Mini PCIe/mSATA Signal SATA 0 Select (JP8) SATA 2.0 Note: 1 5 SATA0 supports SATA DOM. 2 6 SATA (JP26) Power 0 2 6 4 Chassis 1 5 Intrusion (JP17) 1 (JP5) 1 1 5 2 6 1 (JP6) 1 PS/2 (JP18) 19 1 (JP7) 2 6 KB/MS 1 5 1 5 1 2 (JP27) Digital I/O (JP19) (JP25) 2 (JP16)
LAN 1
Standby Power LED
(JP15) COM1 RS232/422/485 Select (JP23) (JP24) COM1 RS232/Power Select (JP14)
1
1
COM 4
1
Front Audio
1
(JP21) COM4 RS232/422/485 Select (JP29) (JP30) COM4 RS232/Power Select (JP20)
2
Line-out Realtek ALC888
9 10
12
SATA DOM Power Select (JP22)
1
5 12
SMBus
SATA 1/mSATA Signal Select (JP31)
10
1 LPC 2
6
VGA
PS/2 KB/MS Power Select
11 12
Buzzer
(JP23) 1
Reset
DFI Proprietary Extension Bus
Mini PCIe/mSATA 1 Power Select (JP3) Mini PCIe
SATA 12 Power 1 SATA 2.0 (optional)
11 2
Auto Power-on Select (JP12)
1
21
USB 4-5 Power Select (JP10)
DDR3L_1 SODIMM
1
Standby Power LED
Battery
USB 2.0
DC-in
1
USB 6-7
USB 6-7 Power Select (JP11) USB 2.0 1 2
USB 10-11
1
USB 10-11 Power Select (JP9)
Alert LED HDD LED Power LED
9 10
PS/2 Keyboard/Mouse Power Select
SATA DOM Power Select
JP13
JP22
+5V (default)
1-2 On
+5V (default)
1-2 On
+5V_standby
2-3 On
GND
2-3 On
USB Power Select:
Auto Power-on Select
0-1 (JP1), 4-5 (JP10), 6-7 (JP11), 10-11 (JP9)
Power-on via power button (default)
1-2 On
Power-on via AC power
2-3 On
+5V
1-2 On
+5V_standby (default)
2-3 On
Clear CMOS Data
JP12
Digital I/O Power Select
JP7
JP4
+5V_standby
1-2 On
Normal (default)
1-2 On
+5V (default)
2-3 On
Clear CMOS Data
2-3 On
Mini PCIe/mSATA Power Select
Digital I/O Output State:
JP3
DIO 3/5/7/9 (JP6), DIO 11/13/15/17 (JP5)
+3V_standby (Mini PCIe) (default)
1-2 On
+5V or +5V_standby
1-2 On
+3.3V (mSATA)
2-3 On
GND (default)
2-3 On
Mini PCIe/mSATA Signal Select PCIe (default) mSATA
RS232/Power Select: COM 1 (JP14), COM 2 (JP16),
JP8
COM 3 (JP18), COM 4 (JP20)
1-4-7-10 2-5-8-11 On
RS232 (default)
1-3 (RI), 2-4 (DCD) On
2-5-8-11
RS232 with power
3-5 (+5V), 4-6 (+12V) On
3-6-9-12 On
6
RS232/422/485 Select: COM 1 (JP15), COM 2 (JP17),
SATA 1/mSATA Signal Select
COM 3 (JP19), COM 4 (JP21) RS232 (default)
1-2 On
RS422 Full Duplex
3-4 On
RS485
5-6 On
RS232/422/485 Select: COM 1 (JP23/24), COM 2 (JP25/26), COM 3 (JP27/28), COM 4 (JP29/30) RS232 (default)
1-3, 2-4 On
RS422 Full Duplex/RS485
3-5, 4-6 On
www.dfi.com
7
JP31
SATA 1 (default)
1-4-7-10 2-5-8-11 On
mSATA
2-5-8-11 3-6-9-12 On
Note: 1. SATA port 0 provides adequate space for SATA DOM. 2. When COM 1 RS232/422/485 is selected, JP23 and JP24 must be set accordance to JP15. 3. When COM 2 RS232/422/485 is selected, JP25 and JP26 must be set accordance to JP17. 4. When COM 3 RS232/422/485 is selected, JP27 and JP28 must be set accordance to JP19. 5. When COM 4 RS232/422/485 is selected, JP29 and JP30 must be set accordance to JP21. 6. When installing one DDR3L SODIMM only, make sure to install it into the SODIMM 1 socket.
in in in in
934-EC2000-1A0G A37501522