2016 COURSES Continuing Medical Education Program Elite EMC

DENTAL FOCUS

THE OCCLUSION, THE TMJ AND ORTHODONTIC TREATMENT Orthodontic Treatment Mechanics Cases May 13-14, Ronda Hall, InterContinental Hotel, Bucharest

Prof. Dr. Richard P. McLAUGHLIN Dr. Richard McLaughlin completed his orthodontic training at the University of Southern California in 1976. Since then he has been in the full time practice of orthodontics in San Diego, California. He has lectured extensively in the United States as well as internationally. He is a member of the Pacific Coast Society of Orthodontists, the American Association of Orthodontists, and a Diplomate of the American Board of Orthodontics. He is the Component Director of the Southern California Component of the Edward H. Angle Society of Orthodontists and Past President of the National Angle Society. He is the recipient of the 2009 American Board of Orthodontics Dale Wade Award as well as the 2010 Pacific Coast Society of Orthodontists Award of Merit. In addition, Dr. McLaughlin is a clinical professor at the University of Southern California, Department of Orthodontics in Los Angeles, California, and an associate professor at Saint Louis University, Department of Orthodontics. He has written more than 30 journal articles and co-authored 5 textbooks.

C

orrection of a malocclusion to a position in which the condyles are in the correct position can be likened to the proper construction of the foundation of a house. Without it, the house is subject to future instability, as is the malocclusion treated to the incorrect condyle position. This course presents a comprehensive review of the management of orthodontic patients with temporo-mandibular disorders, as well as preventive 2

considerations. A historical review is presented, in which the concept of ideal occlusion is discussed, as well as its relationship to temporo-mandibular disorders. A protocal for diagnosis and treatment planning, as well as splint therapy is discussed. This is followed by a working classification of TMJ disorders, and numerous case examples describing the management of each category within the classification.

FULL SERVICE TO ORTHODONTISTS PROGRAM FORMAT n

Historical Review Pertinent aspects of the literature will be reviewed concerning occlusion and the temporo-mandibular joint. A detailed discussion of static (centric) occlusion and functional occlusion will be presented. The controversial subject of centric relation will be reviewed. During this lecture a classification concerning the skeletal and dental components of TMJ dysfunction will be presented. n Diagnosis and Treatment Planning The diagnostic process for the TMD patient is reviewed. The benefits and use of the articulator will be reviewed. A three phase treatment planning process is then presented. n Splint Therapy A discussion of splint therapy will be presented as it relates to management prior to orthodontic treatment, as well as to management during orthodontics. n Molar Fulcruming Problems Cases that present with average to high mandibular

plane angles frequently show a molar fulcrumming problem. Several of these cases will be presented and the mechanics of their treatment will be described. n Lack of Vertical Posterior Support Cases that demonstrate a collapsed vertical dimension will be shown and methods of treatment of these cases will be described. n Management of Anterior Slides and Anterior Posturing A number of cases in this category will be presented with comments concerning the use and misuse of functional appliances. n Correction and Avoidance of Distal Displacemen Distal displacement of the condyle is frequently seen in patients with TMD. This subject is discussed and a number of cases within this category will also be presented. n Management of Lateral Skids and True Skeletal Deficiencies Discussion and case presentations concerning these two categories will be presented.

WORKSHOP n Dolphin Imaging: how to manage photos and xray records to keep track of the treatment

and to use the in an effective way during the consultation with the patients. Tracing: how to perform a lateral ceph analysis and the arch analysis in Dolphin. Tracing Super impositions. n 2D VTO: the workflow for a correct approach  to the Treatment Simulation in Dolphin n Aquarium: how to use Aquarium during the consultation and for Marketing. n Dolphin 3D and 3D Surgery: Overview of the main features in Dolphin 3D and 3D Surgery, workflow in a real case. n Cephalometric

Alessandro MANZOLI

COURSE PRICE Payment Date Before April 17th After April 17th

Specialists 400 Euro 500 Euro

Residents 320 Euro 380 Euro

*Check out the special offer on the registration form.

The course price includes: • Course materials, course manual, supplies and promotional materials • Three coffee breaks per day and lunch 3

DENTAL FOCUS

DIGITAL ORTHODONTICS CONFERENCE – THE FUTURE IS NOW!

PRACTICAL DEMONSTRATION

June 3-4, Cluj-Napoca

n LINGUAL ORTHODONTICS CERTIFICATION COURSE

June 3rd, Cluj-Napoca

Prof. Dr. Kee - Joon LEE Dr. Kee-Joon Lee is the professor of the Department of Orthodontics, Yonsei University College of Dentistry, Seoul, Korea. He received DDS and PhD degree from Graduate school, College of Dentistry, Yonsei University. He completed the orthodontics specialty training in Yonsei University. He was a visiting scholar at the Departmen of Biochemistry, University of Pennsylvania School of Dental Medicine in 2002-2004 and at the Division of Plastic Surgery, the Children's Hospital of Philadelphia in 2010-2011. He was an adjunct professor at the Department of Orthodontics, Temple University, and at the University of Pennsylvania (2010-2011). He has contributed many book chapters on biomechanics of miniscrew-driven orthodontics, non-extraction treatment in adults, up-to-date lingual orthodontic mechanics and surgery-first approached using TADs. He is the first who demonstrated the miniscrew-assisted rapid palatal expander (MARPE) for adults in AJO-DO, which was cited by many other authors. He has published many articles and case reports regarding the treatment of non-eruption, and total arch movement for hyperdivergent face in orthodontic journals including two cover issues in AJO-DO. His fields in research include clinical biomechanics regarding TADs application and the suture and bone responses to orthodontic stimulus. He has served as a reviewer in major orthodontic journals, including AJO-DO, Angle Orthodontists and European Journal of Orthodontics. He has been invited to many international orthodontic conferences around the world.

1. Initial digital position

4. INDIVIDUA® transfer tray

4

2. Digital set-up

5. Position after the bracket placement

3. Bracket positioning on the initial position

6. Clinical situation shortly before the bracket removal

FULL SERVICE TO ORTHODONTISTS

COURSE PROGRAM In spite of the growing demand for the lingual orthodontic treatment among adult patients, biomechanical limitations in three-dimensional control of tooth movement and difficulties in the access to the lingual side still exist. In this course, an up-to-date lingual mechanics via combined use of virtual setup models, orthodontic miniscrews and self-ligating brackets(SLB)will be extensively demonstrated in the following aspects. 1. Simplicity in the diagnosis n Quick and easy diagnosis using three-dimensional template analysis n Visualization of treatment goal and midline-based disgnosis 2. Simplicity in the bracket bonding and alignment n Application of CRC tray for lingual SLB n Readily available rebonding system n Quick and easy leveling & alignment using universal leveling wire 3. Simplicity in the anchorage preparation n Symmetric/asymmetric anchorage using miniscrews n Total arch movement in lingual orthodontics 4. Simplicity in the torque control n Arbitrary torque control using single wire n Troubleshooting-loss of torque during treatment

COURSE PRICE Payment Date Before May 1st After May 1st

Specialists 350 Euro 400 Euro

Residents 300 Euro 350 Euro

*Check out the special offer on the registration form.

5

DENTAL FOCUS

DIGITAL ORTHODONTICS CONFERENCE – THE FUTURE IS NOW!

PRACTICAL DEMONSTRATION

June 3-4, Cluj-Napoca

n DIGITAL ORTHODONTICS CERTIFICATION COURSE 1. DIGITAL CLEAR ALIGNER 2. INDIVIDUA 3. MEMOTAIN June 4th, Cluj-Napoca Dr. Pascal SCHUMACHER Dr. Pascal Schumacher is working since 2013 at the Department of Orthodontics at the University of Aachen, Germany. He has graduated in 2009 from the Rheinische Friedrich-Wilhelms University of Dentistry in Bonn. Pascal has received his PHD in 2010 from the University of Koln.In 2013 he has been appointed as national continuous education speaker on the topics of “Digital Orthodontics” and “Orthodontic retentions”. Dr Schumacher is the inventor and developer of MEMOTAIN®, the revolutionary CAD/CAM retainer that has significantly enhanced the factors of precision, durability, adaptation and comfort for orthodontic retainers. His interest in digital orthodontics, experience in international speaking and his personal charisma make him a very interactive and fascinating lecturer that attracts the audience due to his originality.

COURSE TOPICS 1. DIGITAL CLEAR ALIGNER: n CA treatment philosophy n Recomandations and counterindicationas n Clinical cases n Case selection n Workflow n Patient instruction and prophylaxis

COURSE PRICE Payment Date Before May 1st After May 1st 6

2. INDIVIDUA: n Indirect bonding - history, characteristics and mechanics n Digital plan: positioning n Instructions and use recommendations n Workflow

Specialists 350 Euro 400 Euro

Residents 300 Euro 350 Euro

3. MEMOTAIN: n Retention in orthodontics n Fix CAD/CAM lingual retention n Workflow and lab processing n Scientific studies n Instructions and clinical tips for placing the retention n Clinical cases and Memotain evolution n Hygiene

*Check out the special offer on the registration form.

FULL SERVICE TO ORTHODONTISTS

CA Clear Aligners represents a well-established and esthetic solution for treating easy to moderate cases of malocclusion. With a history of over 10 years and more than 100.000 treated patients, the treatment philosophy behind CA Clear Aligner benefits from the developments in digital technology, for an increased degree of precision and predictability. For each step of the treatment the patient will be wearing 3 Aligners of the same conformation, with progressive material thickness, that will allow a gradual adaptation of the teeth to the exercised forces.

1. Create the model

2. Scanning process

3. Digital Set-Up

Create a plaster model of the patient’s jaw in your practice.

We digitalize the patient’s plaster model by using a 3D scanner for a 3D based diagnosis and treatment plan.

With highest precision and control, qualified and experienced staff will fabricate a custom-made digital set-up.

4. Rapid Prototyping On your approval, the set-up model will be produced according to the individual treatment plan using 3D printing method.

5. Fabricate the DIGITAL CLEAR-ALIGNER 7

DENTAL FOCUS

The Individua concept represents a digitally planned tray for high precision indirect bonding. The brackets are virtually placed in the optimal bonding position on the scanned model of the patient and then transferred on the malocclusion with the help of the Individua tray. The biggest innovation comes from the revolutionary used material, with soft elastic properties that allows precise capture of the bracket’s form and positioning, while preventing the tray from tearing during the bonding process. Due to the features of the tray bonding in under 4 minutes per arch is possible, resulting in a more comfortable bonding session for the medic, as well as for the patient.

From digital planning to precise clinical application

INDIVIDUA – precision and accuracy

INDIVIDUA – inserting the transfer tray

INDIVIDUA – final result

8

FULL SERVICE TO ORTHODONTISTS

Lingual retainer produced with CAD/CAM technology for a perfect adaptation to the individual shapes of the teeth and a considerably reduced size, that allows insertion also on the upper arch. The final format of the Memotain retainer is obtained by laser-cutting a sheet of Nitinol, according to a digitally established design. Due to the pseudoelastic properties of the material used and the production method that does not involve bending, the retainer does not have any predetermined weakening points.

MEMOTAIN – digital design establishment process

MEMOTAIN – loyal adaptation to teeths individual forms

Conventional retainer

MEMOTAIN – final clinic result

9

DENTAL FOCUS

REGISTRATION FORM THE OCCLUSION, THE TMJ AND ORTHODONTIC TREATMENT (PROF. DR. RICHARD P. MCLAUGHLIN) COURSE PRICE Payment Date Specialists Residents Before April 17th 400 Euro 320 Euro After April 17th 500 Euro 380 Euro 2. DIGITAL ORTHODONTIC CONFERENCE - THE FUTURE IS NOW! LINGUAL ORTHODONTICS CERTIFICATION COURSE (PROF. DR. KEE-JOON LEE) COURSE PRICE Payment Date Before May 1st After May 1st

Specialists 350 Euro 400 Euro

Residents 300 Euro 350 Euro

3. DIGITAL ORTHODONTICS CONFERENCE - THE FUTURE IS NOW DIGITAL ORTHODONTICS CERTIFICATION COURSE (DR. PASCAL SCHUMACHER) COURSE PRICE Payment Date Specialists Residents Before May 1st 350 Euro 300 Euro 400 Euro 350 Euro After May 1st

SPECIAL OFFER PROMO PACKAGE "A" - COURSES 1+2+3 - 900 Euro (Specialists) PROMO PACKAGE "A" - COURSES 1+2+3 - 750 Euro (Residents) PROMO PACKAGE "B" - COURSES 2+3 - 550 EURO (Specialists) PROMO PACKAGE "B" - COURSES 2+3 - 480 EURO (Residents) Personal Info Name: _________________________________ Surname: ___________________________________ E-mail: _____________________________ Tel: _____________________________________ Mobile: _____________________________________ Adress: Street. ______________________________________________________________________________________________ Nr. _______ City. ____________________________________ Country. ____________________

Signature

_________________________

Date _____________________

Dental Focus, Intrarea Ezareni Nr.6, Et. 1, Ap. 1, Sector 1, Bucuresti, ROMANIA Tel: 021/430.12.87; Fax: 021/430.12.87; e-mail: [email protected]