2016 COURSE SCHEDULE

Occupational Safety and Health Department TRAINING INSTITUTE EDUCATION CENTER Home of the 2016 COURSE SCHEDULE California na Arizo Nevada Hawaii...
11 downloads 2 Views 3MB Size
Occupational Safety and Health Department

TRAINING INSTITUTE EDUCATION CENTER

Home of the

2016 COURSE SCHEDULE California

na Arizo

Nevada

Hawaii

Highlights n New San Diego Course Location n Learn How to Become an Outreach Trainer n Bring UCSD Safety Courses to Your Workplace

(800) 358-9206 • osha.ucsd.edu Serving Arizona, California, Guam, Hawaii, Nevada, and the Pacific Territories

Course Locations

UCSD’s OSHA Training Institute Ed

Reno Sacramento

Las Vegas Henderson

Honolulu

Claremont Los Angeles Anaheim San Diego

Phoenix Tucson

TRAINING INSTITUTE EDUCATION CENTER

Arizona

California

Phoenix/Tempe

Anaheim

Arizona Safety Education Center 201 East Southern Avenue, Ste 204 Tempe, AZ 85282-5178

Brookhurst Community Center 2271 W. Crescent Avenue Anaheim, CA 92801

Tucson

Bakersfield

Arizona Dept. of Occupational Safety & Health (ADOSH) 2675 East Broadway Boulevard Tucson, AZ 85719

New Location coming Soon. Visit osha.ucsd.edu/Bakersfield for more information.

Enrollments are only processed at our San Diego locations, online at osha.ucsd.edu or by calling (800) 358-9206; enrollments not available at any other locations. Please verify course locations in the catalog or online at osha.ucsd.edu. B

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

ducation Center Host Site Locations Claremont (Los Angeles-Inland Empire)

San Diego (University City) OSHA Training Institute Education Center UC San Diego Extension 6256 Greenwich Dr. San Diego, CA 92122 Enrollments Accepted at This Location

Safety Center 109 S. Spring Street Claremont, CA 91711

Los Angeles

Hawaii

Honolulu

Figueroa Courtyard 261 South Figueroa Los Angeles, CA 90012

Los Angeles UCLA School of Public Health 650 Charles E. Young Dr, S. Los Angeles, CA 90095

Sacramento Sacramento Regional Builders Exchange 1331 T Street Sacramento, CA 95811

San Diego OSHA Training Institute Education Center UC San Diego Extension 404 Camino del Rio S., Ste 102 San Diego, CA 92108 Tel: (800) 358-9206 or (619) 260-3070 Enrollments Accepted at This Location

Construction Training Center of the Pacific 94-487 Akoki Street Waipahu, HI 96797

Nevada

Henderson Nevada OSHA/SCATS 1301 N. Green Valley Pkwy, Ste 200 Henderson, NV 89074

Las Vegas Associated General Contractors 150 N. Durango Drive, Ste 100 Las Vegas, NV 89145

Reno AGC Nevada 5400 Mill Street Reno, NV 89510

Enrollments are only processed at our San Diego locations, online at osha.ucsd.edu or by calling (800) 358-9206; enrollments not available at any other locations. Please verify course locations in the catalog or online at osha.ucsd.edu.

(800) 358-9206 • osha.ucsd.edu

1

Course Locations

California (continued)

California (continued)

OSHA 5400 - Trainer Course in Occupational Safety and Health Standards for the Maritime Industry . . . . . . . . . . . . . . . . 15 OSHA 5402 - Maritime Industry Trainer Update Course . . . . . . . . . . . . 15 OSHA 5600 - Disaster Site Worker Trainer Course. . . . . . . . . . . . . . . . . . . . . . . . . 15 UCSD Safety Courses

TABLE OF CONTENTS Course Locations. . . . . . . . . . . . . . . . B-1 General Information . . . . . . . . . . . . . . . 3 Outreach Trainer Info . . . . . . . . . . . . . . 4 Contract Courses. . . . . . . . . . . . . . . . . . 5 Certificate Programs. . . . . . . . . . . . . . 6-9 Cal/OSHA Safety Courses OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers. . . . . . . . . . . . . . . . . . . . . . . . OSHA 5039 - Cal/OSHA Update for General Industry Trainers. . . . . . . . . . . OSHA 5109 - Cal/OSHA Standards for the Construction Industry. . . . . . . . . . . OSHA 5119 - Cal/OSHA Standards for General Industry. . . . . . . . . . . . . . . . .

10 10 10 10

OTIEC Safety Courses OSHA 2015 - Hazardous Materials . . . . . . OSHA 2045 - Machinery and Machine Guarding Standards . . . . . . . . . . . . . . OSHA 2055 - Cranes in Construction. . . . . OSHA 2225 - Respiratory Protection. . . . . OSHA 2255 - Principles of Ergonomics . . . OSHA 2264 - Permit-Required Confined Space Entry. . . . . . . . . . . . . . . . . . . . . OSHA 3015 - Excavation, Trenching and Soil Mechanics. . . . . . . . . . . . . . . OSHA 3095 - Electrical Standards (Low Voltage - Federal). . . . . . . . . . . . OSHA 3115 - Fall Protection . . . . . . . . . . . 2

OSHA 510 - Occupational Safety and Health Standards for the Construction Industry . . . . . . . . . . . . . OSHA 511 - Occupational Safety and Health Standards for General Industry. . . . . . . . . . . . . . . . . . . . . . . . OSHA 521 - OSHA Guide to Industrial Hygiene. . . . . . . . . . . . . . . . . . . . . . . . OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry. . . . . . . . . . . . . . . . . . . . . . . . OSHA 5810 - Hazards Recognition and Standards for On-Shore Oil and Gas Exploration and Production. . . . . . . . . OSHA 6000 - Collateral Duty Course for Other Federal Employees. . . . . . . . . . OSHA 7115 - Lockout/Tagout . . . . . . . . . . OSHA 7205 - Health Hazard Awareness . . OSHA 7405 - Fall Hazard Awareness for the Construction Industry . . . . . . . OSHA 7500 - Introduction to Safety and Health Management. . . . . . . . . . . . . . OSHA 7505 - Introduction to Incident (Accident) Investigation . . . . . . . . . . . OSHA 7845 - Recordkeeping Rule Seminar. . . . . . . . . . . . . . . . . . . .

12

12 12

EM385-1-1 40 Hour Safety . . . . . . . . . . . . Electrical High Voltage Standards - Federal . . . . . . . . . . . . . . . . . . . . . . . Electrical High Voltage Standards - State. Electrical Low Voltage Standards - State. . Electrical Safety Standards NFPA 70E - 2-Day. . . . . . . . . . . . . . . . Fire and Life Safety . . . . . . . . . . . . . . . . . . Laws and Regulations . . . . . . . . . . . . . . . . Safety Inspection Techniques. . . . . . . . . . . Scaffolding. . . . . . . . . . . . . . . . . . . . . . . . . Trainer Course - Confined Space. . . . . . . . Trainer Course - Fall Protection. . . . . . . . . Trainer Course - Forklift Safety . . . . . . . . . Trainer Course - Rigging Safety. . . . . . . . . Trainer Course - Trenching. . . . . . . . . . . . .

16 16 16 16 16 16 17 17 17 17 17 17 17 17

Instructors. . . . . . . . . . . . . . . . . . . . . . 18 12 At-A-Glance (by Date). . . . . . . . . . . . . 19 13 13 13 13

At-A-Glance (by Location). . . . . . . . . . 24 Enrollment Form. . . . . . . . . . . . . . . . . 33

13 13 13 13

11 OTIEC Trainer Courses 11 11 11 11 11 11 11 12

OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry . . . . . . . . . . . . . 14 OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General Industry. . . . . . . . . . . . . . . . . . . . . . . . 14 OSHA 502 - Update for Construction Industry Outreach Trainers . . . . . . . . . 15 OSHA 503 - Update for General Industry Outreach Trainers . . . . . . . . . 15

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

Occupational Safety & Health Department

General Information My Extension

If you need any assistance with this process, call (858) 534-3400.

2016 Course Discounts A 10% course discount is available to several organizations’ members, state and Federal employees. More information can be found on osha.ucsd.edu.

Hotel Accommodations Reduced room rates are often available for students. Hotel information can be found on our website osha.ucsd.edu.

On-site Training All courses in this catalog, and many others, can be customized and taught at your work place. Please call (858) 534-9272 to schedule training at your location. For groups of 10 or more, this can often be a more cost effective manner to deliver needed training.



Course Credit • BRN Credit: The Bureau of Registered Nurses offers BRN credit. Reference UCSD Provider Number 00058.

• ABIH Credit: The American Board of Industrial Hygiene offers Certification Maintenance (CM) points for specific courses which have been registered. • BCSP Credit: The Board of Certified Safety Professionals offers Continuance of Certification (COC) points.

All of the Occupational Health and Safety Department courses at UC San Diego Extension, including the OSHA Training Institute Education Center courses, offer several types of academic and industry credits. The following is the general key for calculating credits:

Credit type

Half day course

One day course

Two day course

Three day course

Four day course

Five day course

0.4

0.8

1.6

2.4

3.2

4.0

CEU Academic credit

0.4

0.5

1.5

2.5

3.0

4.0

ABIH (CM points)

0.67

1.33

2.67

4.0

5.34

6.68

BCSP (COCs)

0.4

.8

1.6

2.4

3.2

4.0

Refund Policy

Enrollment

• Cancellations must be made at least two weeks prior to the course start date to be eligible for a refund. • Transfer requests prior to two weeks will be honored. • Transfers within the two weeks prior to the course start date will be allowable one time only. • Students who do not show up for class and do not call will not be refunded or transferred to another section.

Travel Disclaimer All travel plans must accommodate the published course end time.

You can enroll online or via mail, phone or fax. Many courses have new Federal OSHA pre-requisites. Please see individual course description prior to enrolling. • Online enrollment, visit: osha.ucsd.edu Click the “Enroll Now” button on the course description page. • Phone enrollment call: (800) 358-9206 • Fax enrollment form to: (619) 294-3861 • Mail enrollment form to: OSHA Training Institute UC San Diego Extension 404 Camino del Rio South, Suite 102 San Diego, CA 92108 UCSD Extension reserves the right to cancel a class two weeks prior to the start date. In the event of a cancelled course, the student will be notified and given the option to transfer to another section or receive a full refund.

(800) 358-9206 • osha.ucsd.edu

3

General Information

Access Your Student Records • Enroll in classes • View and/or print your enrollment receipts • Update your personal contact ­information • View your academic history • Download official transcript form • Review and print grades • Request copies of course descriptions and tuition receipts Log On: Three Easy Steps 1. Visit My Extension at myextension. ucsd.edu (do not use www) 2. Enter your user name (email address, not Social Security number) 3. Enter password. (If you do not know your password, click on “Forgot your password?” to create a new one).

UC San Diego OTIEC’s Outreach Trainers Outreach Trainer Info UCSD OTIEC’s Outreach Department is committed to providing friendly, efficient and speedy service to our thousands of trainers. We have dedicated Outreach staff members, a robust and always improving online reporting tool and are available to answer questions via phone and email. Outreach comments and questions should be directed to dedicated staff members at [email protected] and/or 858-534-9283. We are diligently working towards making UCSD the premier OTIEC for Outreach trainers to maintain their affiliation and card processing. We value your opinions and appreciate the continual feedback regarding our new online system. Thank you for your continued support of our safety and outreach programs.

Outreach Trainers

Be an OSHA-Authorized Outreach Trainer!

Outreach Reporting Tool

To become a UCSD OSHA-authorized outreach trainer or to maintain your trainer status for Construction, General Industry, Maritime, Disaster Site or Cal/OSHA, follow these easy steps:

The UC San Diego OSHA Training Institute Education Center developed a web based online Submission Tool for our Outreach Trainers.

Step 1: Download the Prerequisite Verification of Eligibility Form by clicking on “Apply Now” on the relevant trainer course page (500, 501, 502, 503, 5400, 5600, 5029, and 5039). You may also email [email protected] for an electronic copy. Fill out the required information on the form.

This advanced system allows for trainers to submit course documentation electronically and receive cards in a timely and efficient manner, avoiding any unnecessary delays. Often times, card processing takes 24-72 hours—not the customary 30 days.

Step 2: Email the completed form along with a copy of your trainer card or course completion certificate to [email protected] Please note that your verification form cannot be processed without proper proof of the required prerequisites. Step 3: Once you have received an approval email from the OH&S department, you will then follow the instructions to enroll in the class of your choice.

Additionally, our system provides a database for trainers to access all student and card information in real time significantly cutting down time to find student records and process replacement cards when needed. We strive to be the gold standard in Outreach and continue to partner with our trainers to ensure that they are equipped with all the necessary tools to make them successful. Visit osha.ucsd.edu/outreach

UC San Diego Safety Trainer Newsletter UC S D

This newsletter has been designed for the UCSD OTIEC Outreach Trainers. It provides News, Resources, Tools and Updates related to construction, general industry, maritime, Cal/OSHA, disaster site and international training. Don’t miss out, sign up now!

Visit osha.ucsd.edu/newsletter for more information. 4

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

ONSITE SAFETY TRAINING Utility, Government and Business Customers As today’s businesses are faced with changing technologies, stricter regulations, and increasing demands on their time, today’s safety professionals need training resources to protect the bottom line with proven training results.

Customized Training Programs Our expert instructors specialize in designing customized training programs tailored to meet your unique business needs that ensure cost-effective solutions and enable sustainable business practices. Our courses are aligned with your mission, values and strategic goals.

International Operations

Exceptional Customer Service

With the universal global economy, businesses with overseas operations must prove their commitment to safety training and ensure a healthy workplace environment for their employees and customers. Our curriculum helps your organization to identify and avoid preventable business impacts.

UCSD’s OSHA Training Institute Education Center is committed to developing lasting relationships with each client by providing superior customer service based on quality, integrity and trust. To obtain pricing on contracts, please call (800) 534-9272 and ask for a contract specialist or email [email protected]

Contract Only Courses All of the courses offered at the UC San Diego Extension Occupational Safety and Health Department and UCSD OSHA Training Institute Education Center can be brought to your site. In addition, there are many awareness courses that are specifically designed for onsite training. These can be scheduled together to make a customized “Workshop Week” for your employees.

Contract Courses

• OSHA 7000 – Training Guidelines for Safe Patient Handling • OSHA 7100 – Introduction to Machinery and Machine Safeguarding • OSHA 7105 – Evacuation and Emergency Planning • OSHA 7120 – Introduction to Combustible Dust Hazards • OSHA 7125 – Seminar on Combustible Dust Hazards • OSHA 7200 – Bloodborne Pathogens Exposure Control for Healthcare Facilities • OSHA 7210 – Pandemic Influenza Preparedness • OSHA 7225 – Transitioning to Safer Chemicals (Coming Soon) • OSHA 7300 – Understanding OSHA’s Permit Required Confined Space Standard • OSHA 7400 – Noise Hazards in the Construction Industry • OSHA 7410 – Managing Excavation Hazards • OSHA 7415 – Construction Industry Hazards and Prevention Strategies • OSHA 7510 – Introduction to OSHA/or Small Businesses

TRAINING INSTITUTE EDUCATION CENTER



(800) 358-9206 • osha.ucsd.edu

5

Certificate Programs

UC San Diego Occupational Safety and CERTIFICATE PROGRAM BENEFITS Regardless of your educational background, UCSD Certificate Programs provide both experienced and newer safety professionals important workplace knowledge and practical experience regarding safety and safety standards. Benefits include: • Practical application of OSHA regulations in your workplace • Networking with other professionals

• Access to the most current information • Justification for advancement or promotion • Opportunities for new jobs or careers

VA BENEFITS Eligible students may utilize their VA educational benefits for the approved Professional Certificate in Occupational Safety and Health and the Safety Specialist certificate program. Veterans, veteran dependents, and others eligible for veterans’ education programs should determine their benefits and obtain authorization with the Department of VA prior to enrolling in courses. Veterans are encouraged to contact [email protected] with any additional questions.

CERTIFICATE PROGRAM FINANCIAL ASSISTANCE UC San Diego Extension’s Occupational Safety and Health Department is pleased to provide information regarding financing your continuing education needs. Paying for a certificate program should not be an obstacle in furthering your education. Private Student loans are available to assist students with the cost of enrollment fees, certificate fees, and required textbooks. For more information on loans and other financial resources available (including San Diego Workforce Partnership funds), please visit extension.ucsd.edu/financial.

CERTIFICATES AT A GLANCE The Safety Leader (5+ years exp.) Professional Certificate in Occupational Safety and Health



Safety Specialist Certificate Public Sector Safety & Health Fundamentals Certificate Program

6

The Safety The Safety Internship & Student Rookie Leadership (1-5 years exp.) (0-1 years exp.) Skills











UC San Diego Extension

Construction Track

General Industry Track











(800) 358-9206 • osha.ucsd.edu

PROFESSIONAL CERTIFICATE IN OCCUPATIONAL SAFETY AND HEALTH This Professional Certificate provides both experienced and newer safety professionals important workplace knowledge and practical experience regarding safety and safety standards. This program offers concentrated study in areas directly applicable to many jobs and can add breadth and depth to existing knowledge and skills. This program requires the completion of either the OSHA 500 – Trainer Course in OS&H Standards for the Construction Industry or OSHA 501 – Trainer Course in OS&H Standards for General Industry. The required prerequisite to these courses are the OSHA 510 – OS&H Standards for the Construction Industry or OSHA 511 – OS&H Standards for General Industry. In addition to the required course, students must have a minimum of 5 years in occupational health and safety job experience (within either construction or general industry). The recommended beginning courses are the OSHA 510 or OSHA 511. Students have five years to complete the required courses from the date of their certificate registration. • Target Audience: Individuals with 5+ years of experience in occupational safety and health. This applies to both the Public and Private Sectors. • Location of Courses: Courses in the program are offered throughout all UCSD OTIEC locations

• Certificate Design: This is a University of California, San Diego program • Required Courses: a minimum of 7 courses are required • Total Units: 24 units are required to complete the certificate, 35 units for the dual certificate

THE PROFESSIONAL CERTIFICATE IS AVAILABLE IN CONSTRUCTION, GENERAL INDUSTRY OR A DUAL AREA OF SPECIALIZATION. Required for the General Industry Track

Required for the Construction Track Course Title

Units

Course Title

Units

OSHA 3095 Electrical Low Voltage Standards - Federal OSHA 3115 Fall Protection OSHA 521 Industrial Hygiene OSHA 510 OSHA Standards for the Construction Industry UCSD 3200 Scaffolding OSHA 500 Trainer Course for the Construction Industry OSHA 3015 Trenching & Excavation Electives

3.0 3.0 3.0 3.0 2.5 3.0 2.5 4.0

OSHA 3095 Electrical Low Voltage Standards - Federal OSHA 2255 Principles of Ergonomics OSHA 521 Industrial Hygiene OSHA 2045 Machine Guarding OSHA 511 OSHA Standards for General Industry OSHA 2225 Respiratory Protection OSHA 501 Trainer Course for General Industry Electives

3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0



(TOTAL REQUIRED CREDITS) 24.0



(TOTAL REQUIRED CREDITS) 24.0

Dual Certificate A dual certificate in both Construction and General Industry is earned by taking all required courses in both tracks. Thirty-five (35) units total with no additional electives required. Students enrolled in the dual certificate are only required to take one of the two trainer courses, OSHA 500 or OSHA 501. If students choose not to take the other Trainer Course, they must instead take 3 other units as electives to reach the required 35 units in the Dual Certificate. Elective units must be chosen from the UCSD OSHA Training Institute Education Center catalog from courses taken for credit.

How to enroll 1. Visit osha.ucsd.edu 2. On the “Professional Certificate in Occupational Safety and Health” page, click on “Apply Now”



3. Login to your “My Extension” account (or follow the prompts to create a new one) 4. Once logged in, follow the instructions and pay the $60 certificate fee to complete the process. There is no application fee. (800) 358-9206 • osha.ucsd.edu

7

Certificate Programs

Health Department Certificate Programs

Certificate Programs

UC San Diego Occupational Safety and SAFETY SPECIALIST CERTIFICATE According to recent data, the number of occupational safety and health jobs will outpace the number of trained professionals to fill them. This shortage requires employees skilled in a variety of safety topics. The Safety Specialist Certificate was designed by UC San Diego Extension and the Associated Builders and Contractors (ABC) San Diego Chapter and is an intensive, cohort-based program that combines in-class education with associated skills practice. Included in the certificate program topics are all items necessary for individuals to prepare for entry-level safety jobs in the construction industry, including an on-the-job internship. Specific careers program graduates will be competitive for include: • Field Safety Supervisor • Safety Officer • Safety Specialist • Occupational Health and Safety Specialists • Safety Coordinator

• Target Audience: Individuals with 0-5 years of experience in occupational safety and health. This applies to both the Public and Private Sectors. • Location of Courses: Modules/classes in the program are located at UC San Diego Extension’s University City Center

• Certificate Design: This is a University of California, San Diego program • Required Courses: all of the six intensive modules are required • Total Units: 31 units are required to complete the certificate

Certificate Course Matrix

About the Job Internship

Required Certificate Courses (Must be taken as a cohort; no individual enrollments)

Course Title

Units

Module 1 Introduction to Safety

8

Module 2 Regulation Fundamentals for Safety

7

Module 3 Safety Practices

12

Module 4 U.S. Army Corp of Engineers Safety and Health

4

Module 5 Job Internship

0

Module 6 Intensive Leadership Training

0

How to Enroll 1. Visit osha.ucsd.edu 2. On the “Safety Specialist Certificate” page, click on “Apply Now” 3. Login to your “My Extension” account (or follow the prompts to create a new one) 4. Complete the application in its entirety 5. This program requires an application review by the Advisory Committee. You will be contacted about your application and will not automatically be enrolled in the program. 8

UC San Diego Extension

The on-the-job portion of the Safety Specialist Certificate Program, Module 5 consists of a 3-week (120 hours) internship and a workplace project providing students the opportunity to apply their newfound knowledge and skills in a variety of realworld settings within an existing and fully operational local company. Workplace Internship students will be matched with an experienced safety professional to help guide and achieve goals that draw on core construction, safety, health, environmental and business skills. Students will operate under company supervision and deliver project activities requiring varied safety, health, and environmental knowledge as well as interpersonal skills. Responsibilities may include site reviews, identifying health concerns, Hazard Analysis and worker training activities.

(800) 358-9206 • osha.ucsd.edu

PUBLIC SECTOR SAFETY & HEALTH FUNDAMENTALS CERTIFICATE PROGRAM The certificate program in Public Sector Safety & Health Fundamentals supports OSHA’s mission by training public sector employees in occupational safety and health to reduce incident rates for workers in state and local governments (the certificate program is highly applicable to private industry workers as well). Participants have the opportunity to earn certificates for Construction and General Industry training. Participants must complete a minimum of seven OTI Education Center courses (minimum of 68 contact hours) to earn the certificate in either Construction or General Industry. • Target Audience: Those new to safety in both the Public and Private Sectors • Location of Courses: Courses in the program are offered throughout all UCSD OTIEC locations • Certificate Design: This certificate supports OSHA’s mission to reduce incident rates for workers • Required Courses: a minimum of 3 total courses are required per specialization

• Total Hours: a minimum of 68 instruction hours are required to complete each program specialization (construction or general industry).

General Industry Required Certificate Courses Course Title

Construction Required Certificate Courses Course Title

Min. Contact Hours

OSHA 510 Occupational Safety and Health Standards for Construction OSHA 7500 Introduction to Safety and Health Management OSHA 7505 Introduction to Accident Investigation

26 5.5 7.5

(TOTAL HOURS) 39.0

Elective Courses for Construction Industry Course Title OSHA 7410 Managing Excavation Hazards OR OSHA 3015 Excavation, Trenching and Soil Mechanics OSHA 3095 Electrical Standards OSHA 7405 Fall Hazard Awareness for the Construction Industry OR OSHA 3115 Fall Protection OSHA 7105 Evacuation and Emergency Planning OSHA 7110 Safe Bolting: Principles and Practices OSHA 7205 Health Hazard Awareness OSHA 7400 Noise in the Construction Industry OSHA 7845 Recordkeeping Rule Seminar

Min. Contact Hours

OSHA 511 Occupational Safety and Health Standards for General Industry OSHA 7500 Introduction to Safety and Health Management OSHA 7505 Introduction to Accident Investigation

Min. Contact Hours 6.5 20 26 5 18 4 7 6 5.5 4



26 5.5 7.5

(TOTAL HOURS) 39.0

Elective Courses for General Industry Course Title Min. Contact Hours OSHA 3095 Electrical Standards 26 OSHA 7300 OSHA’s Permit-Required Confined Space Entry 7 OR OSHA 2264 Permit-Required Confined Space Standard 20 OSHA 7000 OSHA Training Guidelines for Safe Patient Handling 7.5 OSHA 7005 Public Warehousing and Storage 7 OSHA 7100 Introduction to Machinery and Machine Safeguarding 4 OR OSHA 2045 Machinery & Machine Guarding Standards 26 OSHA 7105 Evacuation and Emergency Planning 4 OSHA 7115 Lockout/Tagout 7.5 OSHA 7200 Bloodborne Pathogens Exposure Control for Healthcare Facilities 7 OSHA 7205 Health Hazard Awareness 6 OSHA 7210 Pandemic Influenza Preparedness 5.5 OSHA 7845 Recordkeeping Rule Seminar 4

How to enroll 1. Review the certificate requirements to determine the appropriate program (construction or general industry) 2. Find and register for courses at osha.ucsd.edu 3. Upon completion of all courses, submit completed application to [email protected] (application available on “Public Sector Safety & Health Fundamentals Certificate Program” page or by emailing [email protected]) 4. Submit the $90 fee to receive your certificate

(800) 358-9206 • osha.ucsd.edu

9

Certificate Programs

Health Department Certificate Programs

Cal/OSHA Courses

Cal/OSHA Safety Courses

OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers This one day course updates the OSHA 5109 with new and current Cal/OSHA standards and continues the student’s authorization to teach both 10 and 30 hour Cal/OSHA Outreach Program. Note: Required prerequisite: OSHA 5109 or OSHA 5029 within four years. IMPORTANT— ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 500/OSHA 502 trainer card with Cal/OSHA sticker or Certificates of completion. The Cal/OSHA Partnership authorized Outreach Trainers must bring their Federal Outreach Trainer card in order to obtain a “Cal/ OSHA Partnership Trainer sticker”. To obtain the Verification of Prerequisite Form please click on “Apply Now” next to a class below. Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description. Fee: $250 Time: 8:00 a.m.-4:30 p.m. Dates Feb 4 Feb 19 Apr 28 May 12 Aug 25

Location Los Angeles San Diego Claremont Sacramento San Diego

Section ID 112124 110903 111937 111947 110992

OSHA 5039 - Cal/OSHA Update for General Industry Trainers This one day course updates the OSHA 5119 with new and current Cal/OSHA standards and continues the student’s authorization to teach both 10 and 30 hour Cal/OSHA Outreach Program. Note: Required prerequisite: OSHA 5119 or OSHA 5039 within four years. IMPORTANT— ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 501/OSHA 503 trainer card with Cal/OSHA sticker or Certificates of completion.The Cal/OSHA Partnership authorized Outreach Trainers must bring their Federal Outreach Trainer card in order to obtain a “Cal/ OSHA Partnership Trainer sticker”. To obtain the Verification of Prerequisite Form please click on “Apply Now” next to a class below. Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description.

Dates Feb 4 Feb 25 Mar 4 May 19 Nov 3

Section ID 111913 112127 111081 111951 111061

OSHA 5109 - Cal/OSHA Standards for the Construction Industry Developed in partnership with Cal/OSHA, this 4-day course emphasizes Title 8 Construction Industry standards and compliance. Topics include IIPP, Ergo, Electrical and many others. The course also provides existing Fed OSHA trainers an endorsement authorizing them to teach 10 & 30 hr Federal- Cal/OSHA outreach courses. Resources and Cal/OSHA training guidelines will be covered. Note: Important—Students taking this course who want to receive the Cal/OSHA Outreach Trainer designation must meet the following required prerequisites: OSHA 500 or 502 (must be a current trainer), One year of Cal/OSHA general industry safety experience, OSHA 500 card must be brought to class. The Cal/OSHA Partnership authorized Outreach Trainers will have their Federal Outreach Trainer cards affixed with a “Cal/OSHA Partnership Trainer sticker.” Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description.

Note: Important—Students taking this course who want to receive the Cal/OSHA Outreach Trainer designation must meet the following required prerequisites: OSHA 501 or 503 (must be a current trainer), One year of Cal/OSHA general industry safety experience, OSHA 501 card must be brought to classThe Cal/OSHA Partnership authorized Outreach Trainers will have their Federal Outreach Trainer cards affixed with a “Cal/OSHA Partnership Trainer sticker.” Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Jan 25-28 Apr 25-28 May 23-26 Jun 20-23 Aug 1-4 Nov 7-10 Nov 14-17

Location Claremont San Diego Los Angeles Bakersfield San Diego Sacramento Anaheim

Section ID 111911 110946 112134 112263 110983 111983 112153

Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Feb 29-Mar 3 Apr 4-7 Apr 25-28 Jun 6-9 Aug 15-18 Sep 19-22

Location San Diego Sacramento Los Angeles Claremont San Diego Bakersfield

Section ID 110906 111931 112133 111954 110988 111975

OSHA 5119 - Cal/OSHA Standards for General Industry Developed in partnership with Cal/OSHA, this 4-day course emphasizes Title 8 General Industry standards and compliance. Topics include IIPP, Ergo, Electrical and many others. The course also provides existing Fed OSHA trainers an endorsement authorizing them to teach 10 & 30 hr Cal/OSHA outreach courses. Resources and Cal/OSHA training guidelines will be covered.

Fee: $250 Time: 8:00 a.m.-4:30 p.m.

10

Location Sacramento Los Angeles San Diego Claremont San Diego

UC San Diego Extension

UCSD OTIEC, Cuyamaca College, and Columbia Southern University have formed an exciting learning partnership paving the way to Degree Completion! Students may apply UCSD OSHA Education Center courses towards an Associate’s Degree at Cuyamaca College and/or an Associate’s and Bachelor’s Degree at Columbia Southern University. Cuyamaca College courses may be applied to a Bachelor’s and Associate’s Degree at Columbia Southern University, as well as Columbia Southern University courses may be applied to an Associate’s Degree at Cuyamaca College. For additional information go to osha.ucsd.edu

(800) 358-9206 • osha.ucsd.edu

OTIEC Safety Courses OSHA 2015 - Hazardous Materials Learn how to apply OSHA general industry standards and integrate materials from other safety standards that relate to hazardous materials. Related processes such as spraying and dipping are covered, as well as electrical equipment. Topics include: Flammable Liquids, Hazardous Waste Operations, Confined Space, Compressed Gases, Hazardous Locations. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Jun 6-9 Jun 27-30 Sep 19-22 Oct 31-Nov 3

Location San Diego Tempe San Diego Los Angeles

Section ID 110958 112227 111036 113261

OSHA 2045 - Machinery and Machine Guarding Standards Get a comprehensive picture of common machinery and related safety standards. Learn aspects of machine inspection and hazard abatement. A mock inspection of a local plant provides hands-on experience. Topics Include: Point of Operation, Portable Hand and Powered Tools, Power Presses, Press Brakes, and Lockout/Tagout. Note: Requires appropriate clothing for field exercise. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Location Tempe San Diego Claremont Tempe San Diego

Section ID 111309 110910 111959 111380 111052

OSHA 2055 - Cranes in Construction This course covers the best practices in crane and derrick operation using the OSHA Cranes and Derricks in Construction Rule as a guide. Course topics include hazards associated with crane assembly and disassembly, types of cranes, lifting concepts, rigging and wire rope, signaling, employee qualifications and training, and maintenance, repair, and inspection requirements. Students will participate in workshops to reinforce concepts of safe crane operation. Upon course completion students will have the ability to identify the types of cranes and their components and attachments, determine safe operating conditions, and recognize common violations of OSHA Standards. Note: Requires appropriate clothing for field exercise. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Jan 25-28 Aug 29-Sep 1



Location Tempe San Diego

Section ID 111295 110995

Learn how to establish, maintain, and monitor a respirator program following the requirements in 29 CFR 1910.134. Discuss the technical aspects for the proper selection and use of respiratory protection. Evaluate compliance with OSHA’s standard by using the compliance directive and the “Small Entity Compliance Guide.” Topics include: Respiratory Protection Program, Fit Testing Demonstration, Selection of Respirators, Maintenance and Care. Note: It is highly recommended to complete the OSHA 521 course prior to this course. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Jan 25-28 Apr 18-21 Jul 11-14 Jul 25-28 Aug 15-18 Oct 31-Nov 3

Location San Diego Tempe Los Angeles San Diego Waipahu San Diego

Section ID 110878 111324 112137 110979 112141 111060

OSHA 2255 - Principles of Ergonomics (formerly known as “OSHA 2250”) Get the information you need to combat musculoskeletal injuries. Course highlights include industrial case studies covering analysis and design of work stations and equipment, laboratory sessions in manual lifting and coverage of OSHA’s proposed ergonomic protection standard. Topics Include: Repetitive Injuries, Musculoskeletal Disorders, Video Displays, Workstation and Tool Design, and Seating. Note: Requires appropriate clothing for field exercise. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Mar 7-10 Apr 11-14 Aug 1-4 Aug 22-25 Nov 28-Dec 1

Location Tempe San Diego San Diego Los Angeles San Diego

Section ID 111317 110943 110981 112142 111071

OSHA 2264 - Permit-Required Confined Space Entry The danger of explosion, poisoning, and asphyxiation exists every time a worker enters a confined space. Learn the OSHA required confined space entry standard, hazards associated with entry procedures, Personal Protective Equipment, ventilation and purging requirements, calculations and techniques, and appropriate atmosphere testing equipment. Course features hands-on training with explosion meters, oxygen meters, and other test equipment.

Dates Apr 11-13 Apr 25-27 May 23-25 Oct 24-26

Location Anaheim San Diego Tempe San Diego

Section ID 112132 110945 111328 111054

OSHA 3015 - Excavation, Trenching and Soil Mechanics (formerly known as “OSHA 3010”) Construction trenching accidents claim the lives of 40 workers per year. Save lives by learning the OSHA standards and the safety aspects of excavation and trenching. Discover practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations. Topics Include: Principles and Applications, Sloping, Benching, and Shoring. Note: Requires appropriate clothing for field exercise. Fee: $675 Time: 8:00 a.m.-4:30 p.m. Dates Feb 1-3 Jun 27-29 Jul 25-27 Aug 29-31 Sep 26-28 Oct 10-12 Nov 7-9 Dec 5-7

Location San Diego Tempe Claremont San Diego Los Angeles Tempe San Diego Waipahu

Section ID 110879 111376 111962 110993 112422 111392 111062 112155

OSHA 3095 - Electrical Standards (Low Voltage - Federal) Learn OSHA’s standards associated with electrical installations and equipment. Gain knowledge of single and three phase systems, cord and plug connected and fixed equipment, grounding, ground fault circuit interrupters, hazardous locations and safety related work practices. Special emphasis is placed on electrical hazard recognition and OSHA inspection procedures. Topics include: Personal Protective Equipment, Energized Parts, Grounding, Medical Services / First Aid, Hazardous Energy Control. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Location Section ID Mar 14-17 San Diego 110912 Apr 25-28 Tempe 112228 Jun 20-23 San Diego 110962 Sep 26-29 San Diego 111049 Nov 7-10 Tempe 111396 Nov 14-17 Las Vegas 111985 Nov 28-Dec 1 Claremont 111987

Fee: $675 Time: 8:00 a.m.-4:30 p.m.

(800) 358-9206 • osha.ucsd.edu

11

OTIEC Safety Courses

Dates Feb 16-19 Mar 7-10 Jul 11-14 Jul 25-28 Oct 3-6

OSHA 2225 - Respiratory Protection

OSHA 3115 - Fall Protection (formerly known as “OSHA 3110”) This 4-day course includes: encounter stateof-the-art technology for fall protection and current OSHA requirements. Topics include the principles of fall protection, the components of fall arrest systems, the limitations of fall arrest equipment, and OSHA policies regarding fall protections. Course features a one-day field exercise demonstrating fall protection equipment. Topics include: Conventional Systems, Body Holding Devices, Anchor Points, Harness, Vertical / Horizontal Traveling Systems. Note: Requires appropriate clothing for field exercise. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Jan 19-22 May 2-5 Aug 15-18 Sep 26-29 Oct 24-26 Nov 7-10 Dec 5-8

Location Tempe San Diego San Diego Tempe Claremont Waipahu San Diego

Section ID 111289 110949 110989 111390 111980 112150 111075

OTIEC Safety Courses

OSHA 510 - Occupational Safety and Health Standards for the Construction Industry According to the Bureau of Labor Statistics, construction was the leading industry for injuries. Learn the 29 CFR 1926 standards, as well as construction safety and health principles to help prevent injury. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. Topics Include: OSH Act, Safety Programs, Fall Protection, Personal Protective Equipment, Stairs and Ladders. Fee: $750 Time: 8:00 a.m.-4:30 p.m.

Safety Matters Sign-Up Don’t miss out on insights about current events from our instructors, exclusive offers and new courses from UC San Diego’s OSHA Training Institute Education Center. Visit osha.ucsd.edu to sign up.

Dates Jan 11-14 Jan 11-14 Jan 19-22 Jan 25-28 Jan 25-28 Feb 8-11 Feb 16-19 Feb 22-25 Mar 7-10 Apr 4-7 Apr 11-14 May 2-5 Jul 11-14 Jul 18-21 Jul 18-21 Aug 1-4 Aug 8-11 Aug 15-18 Sep 19-22 Oct 3-6 Oct 24-27 Nov 14-17

Location San Diego Tempe Bakersfield Anaheim Waipahu Claremont Sacramento Henderson Tucson San Diego Tempe Reno San Diego Tempe Bakersfield Las Vegas Claremont Sacramento San Diego Tempe Reno San Diego

OSHA 521 - OSHA Guide to Industrial Hygiene

Section ID 110874 111285 111910 112117 112116 111915 111916 111918 111921 110939 111323 111939 110968 111379 111961 111964 111965 111967 111035 111391 111981 111065

According to the Archives of Internal Medicine (AIM), more than 60,300 fatalities result from occupational illnesses annually. Minimize the threat of illnesses by learning industrial hygiene practices and related OSHA regulations and procedures. Learn how to recognize potential health hazards in the workplace and define terms relating to OSHA health requirements. From workshops in health hazard recognition to air contaminant sampling, this course will give you the information you need to combat occupational illnesses. Topics include: Respiratory Protection, Hazard Communication, Confined Spaces, Ventilation, and Recordkeeping. Note recommended prerequisite course: OSHA 510, OSHA 511, OSHA 5109 or OSHA 5119. Requires appropriate clothing for field exercise. It is also highly recommended to bring a calculator to class.

OSHA 511 - Occupational Safety and Health Standards for General Industry For students wanting to learn the 29 CFR 1910 standards, this course is a must. Learn crucial OSHA policies, procedures, and standards, as well as general industry safety and health principles as they relate to real world situations. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. Topics Include: OSH Act, Safety and Health Management Systems, Personal Protective Equipment, Hazard Communication, and Electrical. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Jan 11-14 Feb 8-11 Mar 21-24 Apr 18-21 May 2-5 May 2-5 May 16-19 Jun 13-16 Jun 20-23 Jun 27-30 Jul 18-21 Jul 25-28 Aug 1-4 Aug 8-11 Sep 12-15 Sep 19-22 Oct 10-13 Oct 24-27 Nov 14-17

Location San Diego Tempe Claremont Las Vegas Bakersfield San Diego Tempe Tucson Waipahu Sacramento Los Angeles San Diego Tempe Reno Claremont Anaheim Bakersfield San Diego Tempe

Section ID 110875 111316 111926 111934 111940 110948 111327 111956 112136 111958 112138 110969 111381 111966 111973 112144 111979 111055 111397

Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Feb 29-Mar 3 Mar 21-24 Apr 4-7 Aug 8-11 Nov 7-10

Location San Diego Los Angeles Tempe San Diego San Diego

Section ID 110907 112130 111322 110985 111063

OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry This course is the standards for the Maritime Industry. It is also a required Prerequisite for the OSHA 5400 - Trainer Course - Maritime Safety. Given OSHA standards and current industry information, students will be able to demonstrate ability to interpret federal standards for the maritime industry. Students will be able to identify the jurisdictional responsibilities of federal regulatory agencies in maritime industries, andable to identify how the hierarchy of rules applies to maritime industries covered by OSHA, Inspections, Citations, and Enforcement Policies. Fee: $925 Time: 8:00 a.m.-4:30 p.m. Dates Feb 8-12 May 16-20 Oct 24-28

Location San Diego San Diego San Diego

Section ID 110899 110955 111056

Course Credit Calculations UCSD safety and UCSD OTIEC courses offer several types of academic and industry credit. See page 3 12

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

OSHA 5810 - Hazards Recognition and Standards for On-Shore Oil and Gas Exploration and Production This course provides essential information for employees and employers to protect themselves by developing the knowledge and skills to anticipate, recognize, evaluate and control hazards common to the on-shore oil and gas exploration and production industry. This includes work sites associated with the on-shore exploration and production oil and gas industry including, but not limited to construction, drilling, completion, well servicing, production, product gathering and processing, and product transmission. This course is intended for employees and employers engaged in all phases of on-shore oil and gas exploration and production. Fee: $925 Time: 8:00 a.m.-4:30 p.m. Dates Apr 11-15

Location Bakersfield

Section ID 111933

OSHA 6000 - Collateral Duty Course for Other Federal Employees

Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Mar 14-17 Nov 14-17 Nov 28-Dec 1

Location San Diego San Diego Tempe

Section ID 110911 111068 111398

OSHA 7115 - Lockout/Tagout In this course, students will learn about the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machines and equipment. Fee: $250 Time: 8:00 a.m.-4:30 p.m. Dates Apr 11



Location San Diego

OSHA 7505 - Introduction to Incident (Accident) Investigation

This one-day course focuses on recognizing potential health hazards in the workplace, and avoiding, minimizing, controlling or eliminating them whenever possible. Exposure to health hazards continues to be common in spite of advances in control measures and techniques. This course will provide information on health hazards and discuss ways to recognize, evaluate, and control them in the workplace.

This course will provide the knowledge, practical skills, and tools to conduct accident and incident investigations. Topics in this interactive course will include needs and responsibilities for investigation, preparation and planning, witness interviewing and qualifying, photographing and diagramming of accident scenes, analytical techniques, report writing, and legal aspects. Human and environmental factors and their interaction with the investigation will also be covered in this two-day course packed with information.

Fee: $250 Time: 8:00 a.m.-4:30 p.m. Dates Jun 20

Location Tempe

Section ID 111332

OSHA 7405 - Fall Hazard Awareness for the Construction Industry In 2004, the Bureau of Labor Statistics data showed that 36 percent of the 1,224 construction worker fatalities were attributed to falls. Designed for small construction employers and employees, this course is packed with information on fall hazards at work sites. Providing a focus on falls to a lower level rather than falls from slips and trips, Fall Arrest Awareness teaches you how to control or prevent these hazards whenever possible. Topics Include: Identification of Fall Hazards, Analyzing Fall Hazards, Preventing Fall Hazards, and OSHA Resources. Fee: $250 Time: 8:00 a.m.-4:30 p.m. Dates Jun 22

Location Tempe

Fee: $425 Time: 8:00 a.m.-4:30 p.m. Dates Feb 11-12 May 9-10 Oct 31-Nov 1 Dec 1-2

Location San Diego Tempe Tucson San Diego

Section ID 110900 111907 111982 111073

OSHA 7845 - Recordkeeping Rule Seminar This half-day course will assist employers in identifying and fulfilling their responsibilities for posting certain records, maintaining records of illnesses and injuries, and reporting specific cases to OSHA. Several practice workshops are included. Employees of companies that have responsibilities under OSHA’s revised recordkeeping Rule 29 CFR 1904 will benefit from this course. Fee: $125 Time: 8:00 a.m.-12:00 p.m.

Section ID 111334

OSHA 7500 - Introduction to Safety and Health Management

Dates Apr 13 Jun 23

Location San Diego Tempe

Section ID 110942 111335

OTIEC Safety Courses

If you are a federal employee, learn to recognize basic safety and health hazards in the workplace and effectively assist agency safety and health officers in their inspection and abatement efforts. This course introduces federal agency collateral duty safety and health personnel to the OSH Act, Executive Order 12196, 29 CFR 1960, and 29 CFR 1910. A mock inspection of a government facility will provide hands on experience. Topics include Walking and Working Surfaces, Industrial Hygiene, Hazardous Materials, Personal Protective Equipment, and Lockout/Tagout. Note: Requires appropriate clothing for field exercise.

OSHA 7205 - Health Hazard Awareness

This introductory course addresses the four core elements of an effective safety and health program with strategies & techniques that are critical to each element’s proper management. The course is designed for the small employer, business owner or manager designated with the responsibility to develop and manage a firm’s safety and health program or system. The training is also suitable for employees and employee representatives responsible for improving safety and health in the workplace. Fee: $250 Time: 8:00 a.m.-4:30 p.m. Dates Apr 12 Jun 21

Location San Diego Tempe

Section ID 110941 111333

Section ID 110940

(800) 358-9206 • osha.ucsd.edu

13

Courses Throughout California

Serving many communities throughout the state, UCSD’s OTIEC offers authorized OSHA Training courses and all of the required courses to complete each of our certificates within California. Anaheim Brookhurst Community Center 2271 W. Crescent Avenue Anaheim, CA 92801

Bakersfield New Location coming Soon. Visit osha.ucsd.edu/Bakersfield for more information.

Los Angeles Figueroa Courtyard 261 South Figueroa Los Angeles, CA 90012

Los Angeles UCLA School of Public Health 650 Charles E. Young Dr, S. Los Angeles, CA 90095

San Diego OSHA Training Institute Education Center UC San Diego Extension 404 Camino del Rio S., Ste 102 San Diego, CA 92108

OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General Industry

OTIEC Trainer Courses OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry The focus of this TRAINER course is to prepare students to teach the 10 and 30 Hour Outreach classes. Course time is spent learning and practicing adult training techniques. Students will participate in the development and delivery of lectures during class. Thorough knowledge of OSHA Construction Standards (CFR 1926) is required. Following successful completion of the written exam, students become authorized OSHA Trainers in the 10 and 30 Hour Outreach Programs. Laptop recommended. Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequisite Form must be sent in, along with your OSHA 510 documentation, to obtain approval to attend the course. The required prerequisites are: OSHA 510 course and five years of construction safety experience. A college degree in occupational safety and health, a CSP, CIH, CHST or CSHM designation in the applicable training area may be substituted for two years of experience with proper documentation. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Jan 25-28 Feb 1-4 Feb 16-19 Feb 29-Mar 3 Mar 7-10 Mar 14-17 Mar 21-24 Apr 4-7 Apr 4-7 Apr 18-21 May 2-5 Jun 6-9 Jun 13-16 Aug 1-4 Aug 8-11 Aug 15-18 Aug 22-25 Aug 29-Sep 1 Sep 12-15 Oct 3-6 Oct 31-Nov 3 Nov 14-17 Dec 5-8

Location San Diego Tempe Bakersfield Claremont Anaheim Sacramento Henderson Tucson Waipahu San Diego Tempe Reno Los Angeles San Diego Tempe Bakersfield Las Vegas Claremont Sacramento San Diego Tempe Reno San Diego

Section ID 110877 111291 111917 111919 112128 111922 111927 111929 112131 110944 111326 111938 112135 110982 111382 111968 111969 111970 111974 111050 111395 111986 111077

The focus of this Trainer course is to prepare students to teach the 10 and 30 Hour Outreach classes. Course time is spent learning and practicing adult training techniques. Students will participate in the development and delivery of lectures during class. Thorough knowledge of OSHA General Industry Standards (CFR 1910) is required. Upon successful course completion, students become authorized OSHA Trainers in the 10 and 30 Hour Outreach Programs. Laptop recommended. Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequisite Form must be sent in, along with your OSHA 511 documentation, to obtain approval to attend the course. The required prerequisites are: OSHA 511 course and five years of general industry safety experience. A college degree in occupational safety and health, a CSP, CIH, OSHT or CSHM designation in the applicable training area may be substituted for two years of experience with proper documentation. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Feb 1-4 Feb 29-Mar 3 Apr 11-14 May 16-19 May 16-19 May 23-26 Jun 6-9 Jul 18-21 Jul 18-21 Jul 25-28 Aug 1-4 Aug 15-18 Aug 22-25 Aug 29-Sep 1 Oct 10-13 Oct 24-27 Nov 7-10 Nov 14-17 Dec 5-8

Location San Diego Tempe Claremont Las Vegas San Diego Bakersfield Tempe Tucson Waipahu Sacramento Los Angeles San Diego Tempe Reno Claremont Anaheim Bakersfield San Diego Tempe

Section ID 110893 111313 111932 111950 110952 111953 111329 111960 112139 111963 112140 110987 111388 111971 111978 112146 111984 111067 111400

OTIEC Trainer Courses

San Diego (University City) OSHA Training Institute Education Center UC San Diego Extension 6256 Greenwich Dr. San Diego, CA 92122

Sacramento Sacramento Regional Builders Exchange 1331 T Street Sacramento, CA 95811

14

UC San Diego Extension

Travel Plans All travel plans must accommodate the published course end time. (800) 358-9206 • osha.ucsd.edu

OSHA 502 - Update for Construction Industry Outreach Trainers Are you an active trainer in the Outreach Program? Have you completed the Trainer Course for the Construction Industry OSHA 500? You must be updated every four years on training techniques, OSHA construction industry standards, policies, and regulations. Once you successfully complete the course, you are authorized to train for an additional four year term. Bring current trainer card to class for verification of your status. Laptop recommended. Note required prerequisite: OSHA 500 or OSHA 502 within four years. IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 500/OSHA 502 trainer card or Certificate of completion. Fee: $495 Time: 8:00 a.m.-4:30 p.m. Dates Feb 1-3 Feb 8-10 Feb 16-18 Feb 22-24 Feb 22-24 Mar 7-9 Apr 25-27 May 9-11 May 23-25 May 23-25 Jun 13-15 Aug 22-24 Aug 29-31 Sep 26-28 Oct 3-5 Oct 31-Nov 2

Location Los Angeles Las Vegas San Diego Tempe Waipahu Reno Claremont Sacramento San Diego Tucson Tempe San Diego Tempe Claremont Henderson San Diego

Section ID 112123 111914 110901 111311 12125 111920 111935 111941 110956 111952 111330 110991 111389 111976 111977 111058

OSHA 503 - Update for General Industry Outreach Trainers Are you an active trainer in the Outreach Program? Have you completed the OSHA 501 - Trainer Course for General Industry? You must be updated every 4 years on training techniques, OSHA general industry standards, policies, and regulations. Once you successfully complete the course, you are authorized to train for an additional four year term. Must bring current trainer card to class. Laptop recommended.

Note required prerequisite: OSHA 501 or OSHA 503 within four years. IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 501/OSHA 503 trainer card or Certificate of completion. Fee: $495 Time: 8:00 a.m.-4:30 p.m. Dates Feb 1-3 Feb 22-24 Feb 29-Mar 2 Mar 21-23 May 16-18 Jun 13-15 Jul 11-13 Aug 8-10 Sep 7-9 Oct 10-12 Oct 24-26 Oct 31-Nov 2

Location Sacramento Los Angeles San Diego Tempe Claremont Las Vegas Tempe San Diego Tucson Waipahu Tempe San Diego

Section ID 111912 112126 110905 111923 111948 111955 111378 110984 111972 112145 111394 111059

OSHA 5400 - Trainer Course in Occupational Safety and Health Standards for the Maritime Industry This is a Trainer Course for those interested in teaching the 10 and 30 Hour Maritime Outreach Program. Special emphasis is placed on required Outreach topics, using OSHA standards as a guide. Students are taught effective adult instructional techniques. This course authorizes students to become Maritime Outreach Trainers. Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequisite Form must be sent in, along with your OSHA 5410 documentation, to obtain approval to attend the course. The required prerequisites are: OSHA 5410 course and three years of maritime safety experience. Additional requirements include two years of occupational safety and health experience (with a broad focus) in any industry; a college degree in occupational safety and health, from an accredited college or university; an ASP, CSP, CIH, CMC or CSHM designation.

Location San Diego San Diego San Diego

Participants will update their maritime trainer status and be able to demonstrate continued development by applying effective adult learning principles and training techniques to identify and explain maritime industry hazards and corrective measures. Note required prerequisite: OSHA 5400 or OSHA 5402 within four years. IMPORTANT— ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 5400/OSHA 5402 trainer card or Certificate of completion. Fee: $675 Time: 8:00 a.m.-4:30 p.m. Dates Mar 7-9 Mar 21-23 Dec 5-7

Location San Diego Waipahu San Diego

Section ID 110909 112129 111074

OSHA 5600 - Disaster Site Worker Trainer Course Experienced trainers will learn to present the OSHA 7600 - Disaster Site Worker Course. You will be able to apply elements of successful training programs and will practice knowledge, skills and attitudes through discussion, exercises and presentations. You will receive lesson plans, training materials and information on training techniques and resources. You will be expected to present a select portion of the Disaster Site Worker Course. Re-certification is required every four years. Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequisite Form must be sent in, along with your OSHA 500 or OSHA 501 and 40-Hour HAZWOPER documentation, to obtain approval to attend the course. The required prerequisites are: OSHA 500 or OSHA 501 course, three years of safety training experience and completion of the 40-Hour HAZWOPER course. Fee: $725 Time: 8:00 a.m.-4:30 p.m. Dates Nov 28-Dec 1

Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Feb 22-25 Jun 6-9 Nov 7-10

OSHA 5402 - Maritime Industry Trainer Update Course

Location San Diego

Section ID 111072

Section ID 110904 110959 111064

OTIEC Trainer Courses

Course Credit Calculations UCSD safety and UCSD OTIEC courses offer several types of academic and industry credit. See page 3

(800) 358-9206 • osha.ucsd.edu

15

UCSD Safety Courses

UCSD Safety Courses EM385-1-1 40 Hour Safety This course is for contractors, military and government employees who enforce or must comply to the EM385-1-1 US Army Corps of Engineers safety and health requirements. You will learn procedures of the Navy and US Army Corps of Engineers contracts, and the safety and health requirements of the US Army Corps of Engineers Safety and Health Requirements manual. Upon completion, students receive an official OSHA 30 Hour card for Construction. Topics include: Preparation of Site-Specific Accident Prevention Plan (APP), Intro to OSHA, Site Safety Health Officer’s Qualifications & Responsibilities, Activity Hazard Analysis development, Site Personnel training, Incident Response, Job site Auditing, and Hazard Communication.

Section ID 110894 111319 110986 111924

Electrical High Voltage Standards - Federal OSHA classifies any use of electrical service over 600 volts as high voltage. Regulations and accepted industry standards state that employers meet specific training requirements for their employees who work with high voltage electrical installations. These rules apply to commercial, industrial, and government sites as well as electric utility generation, transmission and distribution installations. This course provides information crucial to safely operate your facility. Along with advance knowledge of critical compliance issues, emphasis is placed on hazard awareness and abatement methods. Topics Include: Fundamentals, Definitions, Wiring Methods, Practices and Equipment, Lockout/Tagout. Recommended prerequisite: OSHA 3095. Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates May 9-12

Location San Diego

For employees working on or near equipment energized above 600 volts, this intensive two day training course is built around state requirements. Learn how to maintain a safe, hazard free workplace by learning safety related information regarding state standards, equipment safety practices, dealing with hazards and the use of protective equipment. Topics include: Personal Protective Equipment, Energized Parts, Grounding, Medical Services/First Aid, and Hazardous Energy Control. Fee: $425 Time: 8:00 a.m.-4:30 p.m. Dates Jul 11-12

Location San Diego

Section ID 110951

Fire and Life Safety Specifically designed for safety professionals, risk managers, supervisors, operations manager and fire service personnel. Students will receive a comprehensive knowledge of fire and safety requirements in the workplace, and be introduced to the history leading to those requirements as well as the specific codes, standards and regulations resulting from past incidents and organizational efforts. Participants will learn to apply the requirements to specific workplace situations. Systems and equipment used to provide Fire and Safety in the workplace including proper maintenance and inspection will be discussed. Fee: $925 Time: 8:00 a.m.-4:30 p.m.

Section ID 110964

Dates May 16-20

Electrical Low Voltage Standards - State

Fee: $925 Time: 8:00 a.m.-4:30 p.m. Dates Location Feb 1-5 San Diego Mar 14-18 Tempe Aug 8-12 San Diego Sep19-23 Tempe

Electrical High Voltage Standards - State

Location San Diego

Section ID 110960

Get practical training so that your business can maintain a safe, hazard free workplace. This intensive two day training course is built around state requirements for employees working on electrical installations and equipment. Included are safety related information regarding state standards, equipment safety practices, dealing with hazards and the use of protective equipment. Topics include: Definitions, Wiring Methods, Practices and Equipment, Lockout/ Tagout. Fee: $425 Time: 8:00 a.m.-4:30 p.m. Dates Jul 14-15

Location San Diego

Safety in the Silver State

Section ID 110965

Electrical Safety Standards NFPA 70E - 2-Day If you work on or near energized electrical systems, have a safety role at these sites or are an emergency responder, this course is for you. The new electrical safety standards (NFPA 70E) are the next step to a safer electrical environment in the workplace. Anyone who deals with hazards such as electrocutions, fires and explosions should attend. Learn how to prevent serious disabling injuries, damage to equipment and work sites and most importantly, save lives. Fee: $425 Time: 8:00 a.m.-4:30 p.m. Dates Feb 16-17 Aug 17-18 Aug 22-23

Location San Diego Tempe San Diego

With classes offered in “The City of Lights” and “The Biggest Little City in the World,” UCSD’s OTIEC proudly works with host sites committed to providing safety training throughout Nevada. Henderson

Section ID 110902 111384 110990

Nevada OSHA/SCATS 1301 N. Green Valley Pkwy, Ste 200 Henderson, NV 89074

Las Vegas Associated General Contractors 150 N. Durango Drive, Ste 100 Las Vegas, NV 89145

Reno AGC Nevada 5400 Mill Street Reno, NV 89510

16

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

Trainer Course - Confined Space

Trainer Course - Rigging Safety

This course includes a basic overview of Federal OSHA standards with main emphasis on Cal/ OSHA standards. Students will be coached through a jobsite inspection process from the opening conference to the closing conference. Working group sessions will study actual court cases highlighting preparation for a hearing, burden of proof, affirmative defense and discovery. The overall objective of this course is to enable students to better prepare for workplace inspections conducted by OSHA. Topics Include: Fed OSHA and Cal OSHA, Litigation, Injury Illness Prevention, Personal Protective Equipment, and Respiratory Protection.

Gain the knowledge and skills to instruct a confined space entry class within your organization. The course will cover advanced confined space issues, teaching, resources, instructional methodology and points on how to jazz up your presentation. Students will be required to give a ten minute presentation for evaluation by other students.

This course covers advanced rigging principles, safety requirements, and key considerations for safe rigging. Students participating in this course will be able to identify appropriate rigging techniques; they will understand sling angles and the stresses imposed. They will go thru OSHA’s new regulations on qualifications of riggers and the national consensus standards for rigging to include sling and hardware inspections and rejection criteria. An extensive use of hands-on practical techniques emphasizes the training and the course is completed with a tour of an active rigging shop.

Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Sep 19-22

Location San Diego

Section ID 111037

Learn the most commonly used safety inspection standards, tools and techniques in this 3-day course. Experience an organized approach to inspecting and auditing projects to insure OSHA compliance and injury prevention. Visit both construction and general industry sites to perform an inspection and prepare a final report.

Section ID 110896 111321 111069

Scaffolding During this course you will become familiar with the OSHA compliance standards for various types of scaffolding including supported, suspended, and aerial lifts. You will also learn how scaffolds work and how to do basic load analysis, as well as hands-on field exercises, the OSHA standards for scaffolding, and resource material. Topics include: Platforms, Bracing, Guardrails, Falling Objects, Tie-Ins and Scaffold Bracing, and Mobile Scaffolds. Fee: $675 Time: 8:00 a.m.-4:30 p.m. Dates Jan 19-21 Mar 14-16 Jul 25-27 Sep 7-9 Sep 12-14



Location San Diego Tempe San Diego Tempe Waipahu

Location San Diego San Diego

Section ID 110947 111057

Continuation of the OSHA 3110 course, this course teaches students how to apply the fall protection standards, and teaches training techniques that are effective and develops an effective training course for both classroom and hands-on in the field. Fee: $250 Time: 8:00 a.m.-4:30 p.m. Dates May 6 Dec 9

Location San Diego San Diego

Section ID 110950 111080

Trainer Course - Forklift Safety

Fee: $675 Time: 8:00 a.m.-4:30 p.m. Location San Diego Tempe San Diego

Dates Apr 28-29 Oct 27-28

Trainer Course - Fall Protection

Safety Inspection Techniques

Dates Feb 8-10 May 11-13 Nov 28-30

Fee: $425 Time: 8:00 a.m.-4:30 p.m.

Participants will learn the OSHA requirements, how they affect companies and how to comply with the standards. This course is designed to give the tools and knowledge needed to return to work and teach forklift operators OSHA requirements. Trainers should have a basic understanding of forklift operations and procedures. Forklift operating experience is helpful but not needed for this course. An operational supervisor may be needed to assist you in training and evaluation of your facility. Topics Include: rough terrain, extendable boom and vertical mast.

Fee: $750 Time: 8:00 a.m.-4:30 p.m. Dates Apr 4-7 Jun 20-23 Sep 12-15

Location San Diego San Diego Tempe

Section ID 110938 110963 111386

Trainer Course - Trenching This course reviews the Federal and State OSHA requirements for excavation and trenching activities. Emphasis will be placed on training techniques, prevention strategies and practices such as inspections, permitting procedures, soil analysis, and competent person responsibilities. Fee: $425 Time: 8:00 a.m.-4:30 p.m. Dates Feb 4-5 Sep 1-2

Location San Diego San Diego

Section ID 110895 110994

Fee: $425 Time: 8:00 a.m.-4:30 p.m. Dates Jun 6-7 Aug 15-16 Oct 10-11

Location San Diego Tempe San Diego

Section ID 110957 111383 111053

Section ID 110876 111320 110967 111385 112143

(800) 358-9206 • osha.ucsd.edu

17

UCSD Safety Courses

Laws and Regulations

UCSD’S OSHA TRAINING INSTITUTE EDUCATION CENTER INSTRUCTORS The Heart of our Education Center We take pride in our instructors and believe they are the heart of your experience at UCSD’s OTIEC. Each instructor is hand-picked and dedicated to providing you with the knowledge you need. They bring to the classroom a wealth of experience, up-to-date subject matter expertise and a passion for sharing their insights and wisdom. Our instructors include current and former state OSHA staff, published industry authors, leaders of large organizations throughout the country and consultants within the Construction, Disaster Site, General Industry, Maritime and military specialties.

Instructors

INSTRUCTORS LIST Tristan Aldeguer, ASP, CHST Russ Barringer, CSP, CSHM, MS Jeff Beeler, CSTI Mark Behrens, CSP Mark E. Bipes, CIH, CSP James Breay, MS, CIH Bob Downey, BA, MPA, CSP, CPP Michelle Eisenberg, MPH, RPT, CIE Robert Fernandez, RSSP Charles Geraci, CBCP Harold Gribow, MS, CSP, ARM

Dave Hancock, BA,MA,CHDT John Harr, BA, MHS, CSE Bob Harrell, BA Steve Healey, ASP, CHST, CUSA, STSC Brian Heramb, CIH, FAIHA Van Howell, BA, CSP, CET Steven Irwin Tracy Lawson, CSP, CET, CHST, CPEA Jeff Lewis, MS, RSP, CSSM, DMT John Marsden, CHST John McHugh

Randy McPheeters, BA, MA, CSP Dave Nelson, Master Electrician Jim Newberry, CHST Mark Norton, MAOM, RSP,CSSM John O’Toole, Ph.D., RSSP Tim Page-Bottorff, CSP Suzy Shamsky, MPH, CIH, CSP Thomas Stefanik, MS, CSP Mary Sullivan, MS, CSP, OHST, CHST Dan Tappen, MPH, CIH Rick Wilson

For biographies and a current list of UCSD instructors, visit osha.ucsd.edu.

Courses in Arizona For nearly 20 years, The American Society of Safety Engineers Chapters in Phoenix and Tucson and the Arizona Safety Education Center have proudly offered authorized OSHA Training courses, as a host site of UCSD’s OSHA Training Institute Education Center, throughout the Phoenix and Tucson areas. We are proud to offer all of the courses required to complete the Professional Certificate in Occupational Health and Safety.

Arizona Course Locations Phoenix

Tucson

Arizona Safety Education Center 201 East Southern Avenue, Ste 204 Tempe, AZ 85282

Arizona Dept. of Occupational Safety & Health (ADOSH) 2675 East Broadway Boulevard Tucson, AZ 85719

osha.ucsd.edu/Arizona 18

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

2016 Courses At-A-Glance, by Date COURSE TYPE

LOCATION

SECTION ID

OSHA 510 - OS&H Standards for the Construction Industry

COURSE TITLE

Jan 11-14

San Diego

110874

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jan 11-14

San Diego

110875

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 11-14

Tempe

111285

UCSD

Scaffolding

Jan 19-21

San Diego

110876

OTIEC

OSHA 3115 - Fall Protection

Jan 19-22

Tempe

111289

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 19-22

Bakersfield

111910

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Jan 25-28

San Diego

110877

OTIEC

OSHA 2225 - Respiratory Protection

Jan 25-28

San Diego

110878

OTIEC

OSHA 2055 - Cranes in Construction

Jan 25-28

Tempe

111295

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Jan 25-28

Claremont

111911

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 25-28

Waipahu

112116

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 25-28

Anaheim

112117

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Feb 1-3

San Diego

110879

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Feb 1-3

Sacramento

111912

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 1-3

Los Angeles

112123

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Feb 1-4

San Diego

110893

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Feb 1-4

Tempe

111291

UCSD

EM385-1-1 40 Hour Safety

Feb 1-5

San Diego

110894

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Feb 4

Sacramento

111913

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Feb 4

Los Angeles

112124

UCSD

Trainer Course - Trenching

Feb 4-5

San Diego

110895

UCSD

Safety Inspection Techniques

Feb 8-10

San Diego

110896

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 8-10

Las Vegas

111914

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Feb 8-11

Claremont

111915

OTIEC

OSHA 511 - OS&H Standards for General Industry

Feb 8-11

Tempe

111316

OTIEC

OSHA 5410 - OS&H Standards for the Maritime Industry

Feb 8-12

San Diego

110899

OTIEC

OSHA 7505 - Introduction to Accident Investigation

Feb 11-12

San Diego

110900

UCSD

Electrical Safety Standards - NFPA 70E

Feb 16-17

San Diego

110902

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 16-18

San Diego

110901

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Feb 16-19

Tempe

111309

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Feb 16-19

Sacramento

111916

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Feb 16-19

Bakersfield

111917

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Feb 19

San Diego

110903

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 22-24

Tempe

111311

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 22-24

Waipahu

112125

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Feb 22-24

Los Angeles

112126

OTIEC

OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry

Feb 22-25

San Diego

110904

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Feb 22-25

Henderson

111918

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Feb 25

Los Angeles

112127

OTIEC

Feb 29-Mar 2

San Diego

110905

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

OSHA 503 - Update for General Industry Outreach Trainers

Feb 29-Mar 3

San Diego

110906

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Feb 29-Mar 3

San Diego

110907

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Feb 29-Mar 3

Tempe

111313

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Feb 29-Mar 3

Claremont

111919

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Mar 4

San Diego

111081

OTIEC

OSHA 5402 - Maritime Industry Trainer Update Course

Mar 7-9

San Diego

110909

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Mar 7-9

Reno

111920

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Mar 7-10

San Diego

110910

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Mar 7-10

Tucson

111921

OTIEC

OSHA 2255 - Principles of Ergonomics

Mar 7-10

Tempe

111317

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Mar 7-10

Anaheim

112128

UCSD

Scaffolding

Mar 14-16

Tempe

111320

OTIEC

OSHA 6000 - Collateral Duty Course for other Federal Employees

Mar 14-17

San Diego

110911

(800) 358-9206 • osha.ucsd.edu

At-A-Glance (by Date)



DATES

OTIEC

19

UC San Diego Extension’s Occupational Safety & Health Department

At-A-Glance (by Date)

COURSE TYPE

DATES

LOCATION

SECTION ID

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Mar 14-17

San Diego

110912

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Mar 14-17

Sacramento

111922

UCSD

EM385-1-1 40 Hour Safety

Mar 14-18

Tempe

111319

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Mar 21-23

Tempe

111923

OTIEC

OSHA 511 - OS&H Standards for General Industry

Mar 21-24

Claremont

111926

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Mar 21-24

Henderson

111927

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Mar 21-24

Los Angeles

112130

OTIEC

OSHA 5402 - Maritime Industry Trainer Update Course

Mar 21-22

Waipahu

112129

UCSD

Trainer Course - Rigging Safety

Apr 4-7

San Diego

110938

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Apr 4-7

San Diego

110939

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Apr 4-7

Tempe

111322

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Apr 4-7

Tucson

111929

OTIEC

OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Apr 4-7

Sacramento

111931

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Apr 4-7

Waipahu

112131

OTIEC

OSHA 7115 - Lockout/Tagout

Apr 11

San Diego

110940

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

Apr 11-13

Anaheim

112132

OTIEC

OSHA 2255 - Principles of Ergonomics

April 11-14

San Diego

110943

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Apr 11-14

Tempe

111323

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Apr 11-14

Claremont

111932

OTIEC

OSHA 5810 - Hazards & Standards for On-Shore Oil and Gas

Apr 11-15

Bakersfield

111933

OTIEC

OSHA 7500 - Introduction to Safety and Health Management

Apr 12

San Diego

110941

OTIEC

OSHA 7845 - Recordkeeping Rule Seminar

Apr 13

San Diego

110942

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Apr 18-21

San Diego

110944

OTIEC

OSHA 2225 - Respiratory Protection

Apr 18-21

Tempe

111324

OTIEC

OSHA 511 - OS&H Standards for General Industry

Apr 18-21

Las Vegas

111934

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

Apr 25-27

San Diego

110945

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Apr 25-27

Claremont

111935

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Apr 25-28

San Diego

110946

OTIEC

Apr 25-28

Tempe

111228

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Apr 25-28

Los Angeles

112133

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Apr 28

Claremont

111937

UCSD

Trainer Course - Confined Space

Apr 28-29

San Diego

110947

OTIEC

OSHA 511 - OS&H Standards for General Industry

May 2-5

San Diego

110948

OTIEC

OSHA 3115 - Fall Protection

May 2-5

San Diego

110949

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

May 2-5

Tempe

111326

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

May 2-5

Reno

111939

OTIEC

OSHA 511 - OS&H Standards for General Industry

May 2-5

Bakersfield

111940

UCSD

Trainer Course - Fall Proection

May 6

San Diego

110950

OTIEC

OSHA 7505 - Introduction to Accident Investigation

May 9-10

Tempe

111907

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

May 9-11

Sacramento

111941

UCSD

Electrical High Voltage Standards - Federal

May 9-12

San Diego

110951

UCSD

Safety Inspection Techniques

May 11-13

Tempe

111321

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

May 12

Sacramento

111947

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

May 16-18

Claremont

111948

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

May 16-19

San Diego

110952

OTIEC

OSHA 511 - OS&H Standards for General Industry

May 16-19

Tempe

111327

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

May 16-19

Las Vegas

111950

OTIEC

OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry

May 16-20

San Diego

110955

UCSD

Fire and Life Safety

May 16-20

San Diego

110960

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

May 19

Claremont

111951

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

May 23-25

San Diego

110956

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

May 23-25

Tucson

111952

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

May 23-25

Tempe

111328

20

COURSE TITLE

OSHA 3095 - Electrical Standards (Low Voltage Federal)

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

2016 Courses At-A-Glance, by Date COURSE TYPE



COURSE TITLE

LOCATION

SECTION ID

Bakersfield

111953

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

May 23-26

Los Angeles

112134

UCSD

Trainer Course - Forklift Safety

Jun 6-7

San Diego

110957

OTIEC

OSHA 2015 - Hazardous Materials

Jun 6-9

San Diego

110958

OTIEC

OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry

Jun 6-9

San Diego

110959

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jun 6-9

Tempe

111329

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Jun 6-9

Claremont

111954

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Jun 6-9

Reno

111938

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Jun 13-15

Tempe

111330

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Jun 13-15

Las Vegas

111955

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jun 13-16

Tucson

111956

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Jun 13-16

Los Angeles

112135

OTIEC

OSHA 7205 - Health Hazard Awareness

Jun 20

Tempe

111332

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Jun 20-23

San Diego

110962

UCSD

Trainer Course - Rigging Safety

Jun 20-23

San Diego

110963

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Jun 20-23

Bakersfield

112263

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jun 20-23

Waipahu

112136

OTIEC

OSHA 7500 -Introduction to Safety & Health Management

Jun 21

Tempe

111333

OTIEC

OSHA 7405 - Fall Hazard Awareness for the Construction Industry

Jun 22

Tempe

111334

OTIEC

OSHA 7845 - Recordkeeping Rule Seminar

Jun 23

Tempe

111335

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Jun 27-29

Tempe

111376

OTIEC

OSHA 2015 - Hazardous Materials

Jun 27-30

Tempe

112227

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jun 27-30

Sacramento

111958

UCSD

Electrical High Voltage Standards - State

Jul 11-12

San Diego

110964

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Jul 11-13

Tempe

111378

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jul 11-14

San Diego

110968

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Jul 11-14

Claremont

111959

OTIEC

OSHA 2225 - Respiratory Protection

Jul 11-14

Los Angeles

112137

UCSD

Electrical Low Voltage Stands - State

Jul 14-15

San Diego

110965

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jul 18-21

Tempe

111379

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jul 18-21

Tucson

111960

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jul 18-21

Bakersfield

111961

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jul 18-21

Los Angeles

112138

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jul 18-21

Waipahu

112139

UCSD

Scaffolding

Jul 25-27

San Diego

110967

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Jul 25-27

Claremont

111962

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jul 25-28

San Diego

110969

OTIEC

OSHA 2225 - Respiratory Protection

Jul 25-28

San Diego

110979

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Jul 25-28

Tempe

111380

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jul 25-28

Sacramento

111963

OTIEC

OSHA 2255 - Principles of Ergonomics

Aug 1-4

San Diego

110981

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 1-4

San Diego

110982

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Aug 1-4

San Diego

110983

OTIEC

OSHA 511 - OS&H Standards for General Industry

Aug 1-4

Tempe

111381

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Aug 1-4

Las Vegas

111964

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 1-4

Los Angeles

112140

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Aug 8-10

San Diego

110984

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Aug 8-11

San Diego

110985

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 8-11

Tempe

111382

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Aug 8-11

Claremont

111965

OTIEC

OSHA 511 - OS&H Standards for General Industry

Aug 8-11

Reno

111966

UCSD

EM385-1-1 40-Hour Safety

Aug 8-12

San Diego

110986

UCSD

Trainer Course - Forklift Safety

Aug 15-16

Tempe

111383

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 15-18

San Diego

110987

(800) 358-9206 • osha.ucsd.edu

At-A-Glance (by Date)

DATES

May 23-26

OTIEC

21

UC San Diego Extension’s Occupational Safety & Health Department

At-A-Glance (by Date)

COURSE TYPE

DATES

LOCATION

SECTION ID

OTIEC

OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Aug 15-18

San Diego

110988

OTIEC

OSHA 3115 - Fall Protection

Aug 15-18

San Diego

110989

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Aug 15-18

Sacramento

111967

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 15-18

Bakersfield

111968

OTIEC

OSHA 2225 - Respiratory Protection

Aug 15-18

Waipahu

112141

UCSD

Electrical Safety Standards -NFPA 70E- 2 Day

Aug 17-18

Tempe

111384

UCSD

Electrical Safety Standards - NFPA 70E

Aug 22-23

San Diego

110990

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Aug 22-24

San Diego

110991

OTIEC

OSHA 2255 - Principles of Ergonomics

Aug 22-25

Los Angeles

112142

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 22-25

Tempe

111388

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 22-25

Las Vegas

111969

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Aug 25

San Diego

110992

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Aug 29-31

San Diego

110993

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Aug 29-31

Tempe

111389

OTIEC

OSHA 2055 - Cranes in Construction

Aug 29-Sep 1

San Diego

110995

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 29-Sep 1

Claremont

111970

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 29-Sep 1

Reno

111971

UCSD

Trainer Course - Trenching

Sep 1-2

San Diego

110994

UCSD

Scaffolding

Sep 7-9

Tempe

111385

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Sep 7-9

Tucson

111972

UCSD

Scaffolding

Sep 12-14

Waipahu

112143

UCSD

Trainer Course - Rigging Safety

Sep 12-15

Tempe

111386

OTIEC

OSHA 511 - OS&H Standards for General Industry

Sep 12-15

Claremont

111973

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Sep 12-15

Sacramento

111974

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Sep 19-22

San Diego

111035

OTIEC

OSHA 2015 - Hazardous Materials

Sep 19-22

San Diego

111036

UCSD

Laws and Regulations

Sep 19-22

San Diego

111037

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Sep 19-22

Bakersfield

111975

OTIEC

OSHA 511 - OS&H Standards for General Industry

Sep 19-22

Anaheim

112144

UCSD

EM385-1-1 40 Hour Safety

Sep 19-23

Tempe

111924

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Sep 26-28

Claremont

111976

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Sep 26-28

Los Angeles

112422

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Sep 26-29

San Diego

111049

OTIEC

OSHA 3115 - Fall Protection

Sep 26-29

Tempe

111390

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Oct 3-5

Henderson

111977

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Oct 3-6

San Diego

111050

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Oct 3-6

San Diego

111052

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Oct 3-6

Tempe

111391

UCSD

Trainer Course - Forklift Safety

Oct 10-11

San Diego

111053

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Oct 10-12

Tempe

111392

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Oct 10-12

Waipahu

112145

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Oct 10-13

Claremont

111978

OTIEC

OSHA 511 - OS&H Standards for General Industry

Oct 10-13

Bakersfield

111979

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

Oct 24-26

San Diego

111054

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Oct 24-26

Tempe

111394

OTIEC

OSHA 3115 - Fall Protection

Oct 24-26

Claremont

111980

OTIEC

OSHA 511 - OS&H Standards for General Industry

Oct 24-27

San Diego

111055

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Oct 24-27

Reno

111981

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Oct 24-27

Anaheim

112146

OTIEC

OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry

Oct 24-28

San Diego

111056

UCSD

Trainer Course - Confined Space

Oct 27-28

San Diego

111057

OTIEC

OSHA 7505 - Introduction to Accident Investigation

Oct 31-Nov 1

Tucson

111982

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Oct 31-Nov 2

San Diego

111058

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Oct 31-Nov 2

San Diego

111059

22

COURSE TITLE

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

2016 Courses At-A-Glance, by Date COURSE TYPE

DATES

LOCATION

SECTION ID

OTIEC

OSHA 2225 - Respiratory Protection

COURSE TITLE

Oct 31-Nov 3

San Diego

111060

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Oct 31-Nov 3

Tempe

111395

OTIEC

OSHA 2015 - Hazardous Materials

Oct 31-Nov 3

Los Angeles

113261

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Nov 3

San Diego

111061

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Nov 7-9

San Diego

111062

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Nov 7-10

San Diego

111063

OTIEC

OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry

Nov 7-10

San Diego

111064

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Nov 7-10

Tempe

111396

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Nov 7-10

Sacramento

111983

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Nov 7-10

Bakersfield

111984

OTIEC

OSHA 3115 - Fall Protection

Nov 7-10

Waipahu

112150

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Nov 14-17

San Diego

111065

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Nov 14-17

San Diego

111067

OTIEC

OSHA 6000 - Collateral Duty Course for other Federal Employees

Nov 14-17

San Diego

111068

OTIEC

OSHA 511 - OS&H Standards for General Industry

Nov 14-17

Tempe

111397

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Nov 14-17

Las Vegas

111985

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Nov 14-17

Reno

111986

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Nov 14-17

Anaheim

112153

UCSD

Safety Inspection Techniques

Nov 28-30

San Diego

111069

OTIEC

OSHA 2255 - Principles of Ergonomics

Nov 28-Dec 1

San Diego

111071

OTIEC

OSHA 5600 - Disaster Site Worker Trainer Course

Nov 28-Dec 1

San Diego

111072

OTIEC

OSHA 6000 - Collateral Duty Course for other Federal Employees

Nov 28-Dec 1

Tempe

111398

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Nov 28-Dec 1

Claremont

111987

OTIEC

OSHA 7505 - Introduction to Accident Investigation

Dec 1-2

San Diego

111073

OTIEC

OSHA 5402 - Maritime Industry Trainer Update Course

Dec 5-7

San Diego

111074

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Dec 5-7

Waipahu

112155

OTIEC

OSHA 3115 - Fall Protection

Dec 5-8

San Diego

111075

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Dec 5-8

San Diego

111077

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Dec 5-8

Tempe

111400

UCSD

Trainer Course - Fall Proection

Dec 9

San Diego

111080

For a PDF version of the At-A-Glance by date and/or by location please visit osha.ucsd.edu



Earn a Professional Certificate from UC San Diego Extension’s OSHA Training Institute and proudly wear your safety hard hat! All graduates of the Professional Certificate in Safety and Health are eligible to receive this free gift.

Safety Certificates for Veterans

UC San Diego Extension’s Occupational Safety and Health Department proudly offers two programs for US military veterans that have been approved for use with VA educational benefits. • Professional Certificate in Occupational Safety & Health (see p. 7) • Safety Specialist Certificate (see p.8) To learn more about applying VA educational benefits to our safety certificate programs, we encourage veterans to contact [email protected] ucsd.edu with any questions

(800) 358-9206 • osha.ucsd.edu

23

At-A-Glance (by Date)

Earn Your UCSD Hard Hat!

UC San Diego Extension’s Occupational Safety & Health Department

At-A-Glance (by location)

COURSE TYPE

DATES

LOCATION

SECTION ID

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

COURSE TITLE

Jan 25-28

Anaheim

112117

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Mar 7-10

Anaheim

112128

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

Apr 11-13

Anaheim

112132

OTIEC

OSHA 511 - OS&H Standards for General Industry

Sep 19-22

Anaheim

112144

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Oct 24-27

Anaheim

112146

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Nov 14-17

Anaheim

112153

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 19-22

Bakersfield

111910

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Feb 16-19

Bakersfield

111917

OTIEC

OSHA 5810 - Hazards & Standards for On-Shore Oil and Gas

Apr 11-15

Bakersfield

111933

OTIEC

OSHA 511 - OS&H Standards for General Industry

May 2-5

Bakersfield

111940

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

May 23-26

Bakersfield

111953

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Jun 20-23

Bakersfield

112263

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jul 18-21

Bakersfield

111961

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 15-18

Bakersfield

111968

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Sep 19-22

Bakersfield

111975

OTIEC

OSHA 511 - OS&H Standards for General Industry

Oct 10-13

Bakersfield

111979

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Nov 7-10

Bakersfield

111984

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Jan 25-28

Claremont

111911

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Feb 8-11

Claremont

111915

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Feb 29-Mar 3

Claremont

111919

OTIEC

OSHA 511 - OS&H Standards for General Industry

Mar 21-24

Claremont

111926

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Apr 11-14

Claremont

111932

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Apr 25-27

Claremont

111935

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Apr 28

Claremont

111937

OTIEC

May 16-18

Claremont

111948

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

May 19

Claremont

111951

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Jun 6-9

Claremont

111954

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Jul 11-14

Claremont

111959

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Jul 25-28

Claremont

111962

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Aug 8-11

Claremont

111965

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 29-Sep 1

Claremont

111970

OTIEC

OSHA 511 - OS&H Standards for General Industry

Sep 12-15

Claremont

111973

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Sep 26-28

Claremont

111976

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Oct 10-13

Claremont

111978

OTIEC

OSHA 3115 - Fall Protection

Oct 24-26

Claremont

111980

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Nov 28-Dec 1

Claremont

111987

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Feb 22-25

Henderson

111918

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Mar 21-24

Henderson

111927

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Oct 3-5

Henderson

111977

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 8-10

Las Vegas

111914

OTIEC

OSHA 511 - OS&H Standards for General Industry

Apr 18-21

Las Vegas

111934

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

May 16-19

Las Vegas

111950

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Jun 13-15

Las Vegas

111955

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Aug 1-4

Las Vegas

111964

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 22-25

Las Vegas

111969

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Nov 14-17

Las Vegas

111985

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 1-3

Los Angeles

112123

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Feb 4

Los Angeles

112124

OTIEC

Feb 22-24

Los Angeles

112126

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Feb 25

Los Angeles

112127

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

OSHA 503 - Update for General Industry Outreach Trainers

Mar 21-24

Los Angeles

112130

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Apr 25-28

Los Angeles

112133

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

May 23-26

Los Angeles

112134

24

OSHA 521 - OSHA Guide to Industrial Hygiene

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

2016 Courses At-A-Glance, by Location COURSE TYPE

DATES

LOCATION

SECTION ID

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Jun 13-16

Los Angeles

112135

OTIEC

OSHA 2225 - Respiratory Protection

Jul 11-14

Los Angeles

112137

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jul 18-21

Los Angeles

112138

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 1-4

Los Angeles

112140

OTIEC

OSHA 2255 - Principles of Ergonomics

Aug 22-25

Los Angeles

112142

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Sep 26-28

Los Angeles

112422

OTIEC

OSHA 2015 - Hazardous Materials

Oct 31-Nov 3

Los Angeles

113261

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Mar 7-9

Reno

111920

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

May 2-5

Reno

111939

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Jun 6-9

Reno

111938

OTIEC

OSHA 511 - OS&H Standards for General Industry

Aug 8-11

Reno

111966

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 29-Sep 1

Reno

111971

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Oct 24-27

Reno

111981

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Nov 14-17

Reno

111986

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Feb 1-3

Sacramento

111912

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Feb 4

Sacramento

111913

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Feb 16-19

Sacramento

111916

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Mar 14-17

Sacramento

111922

OTIEC

OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Apr 4-7

Sacramento

111931

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

May 9-11

Sacramento

111941

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

May 12

Sacramento

111947

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jun 27-30

Sacramento

111958

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jul 25-28

Sacramento

111963

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Sep 12-15

Sacramento

111974

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Aug 15-18

Sacramento

111967

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Nov 7-10

Sacramento

111983

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 11-14

San Diego

110874

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jan 11-14

San Diego

110875

UCSD

Scaffolding

Jan 19-21

San Diego

110876

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Jan 25-28

San Diego

110877

OTIEC

OSHA 2225 - Respiratory Protection

Jan 25-28

San Diego

110878

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Feb 1-3

San Diego

110879

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Feb 1-4

San Diego

110893

UCSD

EM385-1-1 40 Hour Safety

Feb 1-5

San Diego

110894

UCSD

Trainer Course - Trenching

Feb 4-5

San Diego

110895

UCSD

Safety Inspection Techniques

Feb 8-10

San Diego

110896

OTIEC

OSHA 5410 - OS&H Standards for the Maritime Industry

Feb 8-12

San Diego

110899

OTIEC

OSHA 7505 - Introduction to Accident Investigation

Feb 11-12

San Diego

110900

UCSD

Electrical Safety Standards - NFPA 70E

Feb 16-17

San Diego

110902

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 16-18

San Diego

110901

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Feb 19

San Diego

110903

OTIEC

OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry

Feb 22-25

San Diego

110904

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Feb 29-Mar 2

San Diego

110905

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Feb 29-Mar 3

San Diego

110906

OTIEC

Feb 29-Mar 3

San Diego

110907

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Mar 4

San Diego

111081

OTIEC

OSHA 5402 - Maritime Industry Trainer Update Course

Mar 7-9

San Diego

110909

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Mar 7-10

San Diego

110910

OTIEC

OSHA 6000 - Collateral Duty Course for other Federal Employees

Mar 14-17

San Diego

110911

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Mar 14-17

San Diego

110912

UCSD

Trainer Course - Rigging Safety

Apr 4-7

San Diego

110938

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Apr 4-7

San Diego

110939

OTIEC

OSHA 7115 - Lockout/Tagout

Apr 11

San Diego

110940

OSHA 521 - OSHA Guide to Industrial Hygiene

(800) 358-9206 • osha.ucsd.edu

At-A-Glance (by location)



COURSE TITLE

25

UC San Diego Extension’s Occupational Safety & Health Department

At-A-Glance (by location)

COURSE TYPE

DATES

LOCATION

SECTION ID

OTIEC

OSHA 2255 - Principles of Ergonomics

April 11-14

San Diego

110943

OTIEC

OSHA 7500 - Introduction to Safety and Health Management

Apr 12

San Diego

110941

OTIEC

OSHA 7845 - Recordkeeping Rule Seminar

Apr 13

San Diego

110942

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Apr 18-21

San Diego

110944

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

Apr 25-27

San Diego

110945

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Apr 25-28

San Diego

110946

UCSD

Trainer Course - Confined Space

Apr 28-29

San Diego

110947

OTIEC

OSHA 511 - OS&H Standards for General Industry

May 2-5

San Diego

110948

OTIEC

OSHA 3115 - Fall Protection

May 2-5

San Diego

110949

UCSD

Trainer Course - Fall Proection

May 6

San Diego

110950

UCSD

Electrical High Voltage Standards - Federal

May 9-12

San Diego

110951

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

May 16-19

San Diego

110952

OTIEC

OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry

May 16-20

San Diego

110955

UCSD

Fire and Life Safety

May 16-20

San Diego

110960

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

May 23-25

San Diego

110956

UCSD

Trainer Course - Fall Proection

Jun 6-7

San Diego

110957

OTIEC

OSHA 2015 - Hazardous Materials

Jun 6-9

San Diego

110958

OTIEC

OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry

Jun 6-9

San Diego

110959

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Jun 20-23

San Diego

110962

UCSD

Trainer Course - Rigging Safety

Jun 20-23

San Diego

110963

UCSD

Electrical High Voltage Standards - State

Jul 11-12

San Diego

110964

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jul 11-14

San Diego

110968

UCSD

Electrical Low Voltage Stands - State

Jul 14-15

San Diego

110965

UCSD

Scaffolding

Jul 25-27

San Diego

110967

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jul 25-28

San Diego

110969

OTIEC

OSHA 2225 - Respiratory Protection

Jul 25-28

San Diego

110979

OTIEC

OSHA 2255 - Principles of Ergonomics

Aug 1-4

San Diego

110981

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 1-4

San Diego

110982

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry

Aug 1-4

San Diego

110983

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Aug 8-10

San Diego

110984

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Aug 8-11

San Diego

110985

UCSD

EM385-1-1 40-Hour Safety

Aug 8-12

San Diego

110986

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 15-18

San Diego

110987

OTIEC

OSHA 5109 - Cal/OSHA Standards for the Construction Industry

Aug 15-18

San Diego

110988

OTIEC

OSHA 3115 - Fall Protection

Aug 15-18

San Diego

110989

UCSD

Electrical Safety Standards - NFPA 70E

Aug 22-23

San Diego

110990

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Aug 22-24

San Diego

110991

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers

Aug 25

San Diego

110992

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Aug 29-31

San Diego

110993

OTIEC

OSHA 2055 - Cranes in Construction

Aug 29-Sep 1

San Diego

110995

UCSD

Trainer Course - Trenching

Sep 1-2

San Diego

110994

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Sep 19-22

San Diego

111035

OTIEC

OSHA 2015 - Hazardous Materials

Sep 19-22

San Diego

111036

UCSD

Laws and Regulations

Sep 19-22

San Diego

111037

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Sep 26-29

San Diego

111049

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Oct 3-6

San Diego

111050

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Oct 3-6

San Diego

111052

UCSD

Trainer Course - Forklift Safety

Oct 10-11

San Diego

111053

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

Oct 24-26

San Diego

111054

OTIEC

OSHA 511 - OS&H Standards for General Industry

Oct 24-27

San Diego

111055

OTIEC

OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry

Oct 24-28

San Diego

111056

UCSD

Trainer Course - Confined Space

Oct 27-28

San Diego

111057

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Oct 31-Nov 2

San Diego

111058

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Oct 31-Nov 2

San Diego

111059

26

COURSE TITLE

UC San Diego Extension

(800) 358-9206 • osha.ucsd.edu

2016 Courses At-A-Glance, by Location COURSE TYPE



COURSE TITLE

LOCATION

SECTION ID

San Diego

111060

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers

Nov 3

San Diego

111061

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Nov 7-9

San Diego

111062

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Nov 7-10

San Diego

111063

OTIEC

OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry

Nov 7-10

San Diego

111064

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Nov 14-17

San Diego

111065

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Nov 14-17

San Diego

111067

OTIEC

OSHA 6000 - Collateral Duty Course for other Federal Employees

Nov 14-17

San Diego

111068

UCSD

Safety Inspection Techniques

Nov 28-30

San Diego

111069

OTIEC

OSHA 2255 - Principles of Ergonomics

Nov 28-Dec 1

San Diego

111071

OTIEC

OSHA 5600 - Disaster Site Worker Trainer Course

Nov 28-Dec 1

San Diego

111072

OTIEC

OSHA 7505 - Introduction to Accident Investigation

Dec 1-2

San Diego

111073

OTIEC

OSHA 5402 - Maritime Industry Trainer Update Course

Dec 5-7

San Diego

111074

OTIEC

OSHA 3115 - Fall Protection

Dec 5-8

San Diego

111075

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Dec 5-8

San Diego

111077

UCSD

Trainer Course - Fall Proection

Dec 9

San Diego

111080

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 11-14

Tempe

111285

OTIEC

OSHA 3115 - Fall Protection

Jan 19-22

Tempe

111289

OTIEC

OSHA 2055 - Cranes in Construction

Jan 25-28

Tempe

111295

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Feb 1-4

Tempe

111291

OTIEC

OSHA 511 - OS&H Standards for General Industry

Feb 8-11

Tempe

111316

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Feb 16-19

Tempe

111309

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 22-24

Tempe

111311

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Feb 29-Mar 3

Tempe

111313

OTIEC

OSHA 2255 - Principles of Ergonomics

Mar 7-10

Tempe

111317

UCSD

Scaffolding

Mar 14-16

Tempe

111320

UCSD

EM385-1-1 40 Hour Safety

Mar 14-18

Tempe

111319

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Mar 21-23

Tempe

111923

OTIEC

OSHA 521 - OSHA Guide to Industrial Hygiene

Apr 4-7

Tempe

111322

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Apr 11-14

Tempe

111323

OTIEC

OSHA 2225 - Respiratory Protection

Apr 18-21

Tempe

111324

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Apr 25-28

Tempe

111228

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

May 2-5

Tempe

111326

OTIEC

OSHA 7505 - Introduction to Accident Investigation

May 9-10

Tempe

111907

UCSD

Safety Inspection Techniques

May 11-13

Tempe

111321

OTIEC

OSHA 511 - OS&H Standards for General Industry

May 16-19

Tempe

111327

OTIEC

OSHA 2264 - Permit-Required Confined Space Entry

May 23-25

Tempe

111328

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jun 6-9

Tempe

111329

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Jun 13-15

Tempe

111330

OTIEC

OSHA 7205 - Health Hazard Awareness

Jun 20

Tempe

111332

OTIEC

OSHA 7500 -Introduction to Safety & Health Management

Jun 21

Tempe

111333

OTIEC

OSHA 7405 - Fall Hazard Awareness for the Construction Industry

Jun 22

Tempe

111334

OTIEC

OSHA 7845 - Recordkeeping Rule Seminar

Jun 23

Tempe

111335

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Jun 27-29

Tempe

111376

OTIEC

OSHA 2015 - Hazardous Materials

Jun 27-30

Tempe

112227

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Jul 11-13

Tempe

111378

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jul 18-21

Tempe

111379

OTIEC

OSHA 2045 - Machinery and Machine Guarding Standards

Jul 25-28

Tempe

111380

OTIEC

OSHA 511 - OS&H Standards for General Industry

Aug 1-4

Tempe

111381

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Aug 8-11

Tempe

111382

UCSD

Trainer Course - Forklift Safety

Aug 15-16

Tempe

111383

UCSD

Electrical Safety Standards -NFPA 70E- 2 Day

Aug 17-18

Tempe

111384

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Aug 22-25

Tempe

111388

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Aug 29-31

Tempe

111389

OSHA 2225 - Respiratory Protection

(800) 358-9206 • osha.ucsd.edu

At-A-Glance (by location)

DATES

Oct 31-Nov 3

OTIEC

27

UC San Diego Extension’s Occupational Safety & Health Department

At-A-Glance (by location)

COURSE TYPE

COURSE TITLE

DATES

LOCATION

SECTION ID

UCSD

Scaffolding

Sep 7-9

Tempe

111385

UCSD

Trainer Course - Rigging Safety

Sep 12-15

Tempe

111386

UCSD

EM385-1-1 40 Hour Safety

Sep 19-23

Tempe

111924

OTIEC

OSHA 3115 - Fall Protection

Sep 26-29

Tempe

111390

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Oct 3-6

Tempe

111391

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Oct 10-12

Tempe

111392

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Oct 24-26

Tempe

111394

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Oct 31-Nov 3

Tempe

111395

OTIEC

OSHA 3095 - Electrical Standards (Low Voltage Federal)

Nov 7-10

Tempe

111396

OTIEC

OSHA 511 - OS&H Standards for General Industry

Nov 14-17

Tempe

111397

OTIEC

OSHA 6000 - Collateral Duty Course for other Federal Employees

Nov 28-Dec 1

Tempe

111398

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Dec 5-8

Tempe

111400

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Mar 7-10

Tucson

111921

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Apr 4-7

Tucson

111929

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

May 23-25

Tucson

111952

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jun 13-16

Tucson

111956

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jul 18-21

Tucson

111960

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Sep 7-9

Tucson

111972

OTIEC

OSHA 7505 - Introduction to Accident Investigation

Oct 31-Nov 1

Tucson

111982

OTIEC

OSHA 510 - OS&H Standards for the Construction Industry

Jan 25-28

Waipahu

112116

OTIEC

OSHA 502 - Update for Construction Industry Outreach Trainers

Feb 22-24

Waipahu

112125

OTIEC

OSHA 5402 - Maritime Industry Trainer Update Course

Mar 21-22

Waipahu

112129

OTIEC

OSHA 500 - Trainer Course in OS&H for the Construction Industry

Apr 4-7

Waipahu

112131

OTIEC

OSHA 511 - OS&H Standards for General Industry

Jun 20-23

Waipahu

112136

OTIEC

OSHA 501 - Trainer Course in OS&H for General Industry

Jul 18-21

Waipahu

112139

OTIEC

OSHA 2225 - Respiratory Protection

Aug 15-18

Waipahu

112141

UCSD

Scaffolding

Sep 12-14

Waipahu

112143

OTIEC

OSHA 503 - Update for General Industry Outreach Trainers

Oct 10-12

Waipahu

112145

OTIEC

OSHA 3115 - Fall Protection

Nov 7-10

Waipahu

112150

OTIEC

OSHA 3015 - Excavation, Trenching and Soil Mechanics

Dec 5-7

Waipahu

112155

U.S. Army CP-12 Program

For a PDF version of the At-A-Glance by date and/or by location please visit osha.ucsd.edu

28

OSHA Training on Oahu

A part of the Department of the Army Civilian (DAC) career programs, the Army Safety and Occupational Health Career Management Program (CP-12) was designed to provide the Army with the well qualified, trained, and led Civilian Safety and Occupational Health professionals needed to meet the Army’s current and future needs. Some of UCSD’s OTIEC courses will meet the requirements of this rigorous program: • OSHA 510 • OSHA 2015 • OSHA 2264 • OSHA 511 • OSHA 225 • OSHA 3095 • OSHA 521 For more information on the CP-12 program, visit safety.army.mil/CP-12

UC San Diego Extension

Authorized OSHA numbered courses are available in our Hawaii classroom–conveniently located minutes from the Honolulu International Airport, world famous Waikiki Beach and the legendary North Shore. Honolulu Construction Training Center of the Pacific 94-487 Akoki Street Waipahu, HI 96797

(800) 358-9206 • osha.ucsd.edu

TRAINING INSTITUTE OCCUPATIONAL SAFETY AND EDUCATION CENTER HEALTH DEPARTMENT

ENROLLMENT FORM Enrolling is Easy

PLEASE PROVIDE YOUR PRIORITY CODE BY REFERRING TO THE FIRST THREE DIGITS OF THE N ­ UMBER ON THE TOP OF YOUR MAILING LABEL (RIGHT ABOVE THE NAME)

Web: o MS.

o MRS.

o MISS

o MR.

osha.ucsd.edu

o DR.

STUDENT I.D./PID #

Mail:

NAME LAST

FIRST

OSHA Training Institute UCSD Extension 404 Camino del Rio South, Suite 102 San Diego, CA 92108

M.I.

ADDRESS CITY

STATE



PHONE

ZIP



DAY

Phone:

ALTERNATE

(800) 358-9206

EMAIL

Fax:

(619) 294-3861

NAME OF EMPLOYER COURSE TITLE

SECTION ID

CREDIT OPTION (CHECK ONE)

FEE

o ACADEMIC (PASS/NO PASS)

o NO GRADE

o ACADEMIC (PASS/NO PASS)

o NO GRADE

o ACADEMIC (PASS/NO PASS)

o NO GRADE

$ o ACADEMIC (LETTER GRADE)

o ACADEMIC (LETTER GRADE) $ o ACADEMIC (LETTER GRADE) $ TOTAL FEES (MAKE CHECK PAYABLE TO UC REGENTS) $

PAYMENT METHOD (FULL PAYMENT MUST ACCOMPANY THIS FORM) o VISA/MASTERCARD/DISCOVER CARD/AMERICAN EXPRESS ­ CARD NUMBER

EXP DATE





o CASH/PERSONAL CHECK (PAYABLE TO UC REGENTS)

o PURCHASE ORDER (MUST BE ATTACHED)



CARD CODE

SIGNATURE OF CARD HOLDER

ADDITIONAL INFORMATION

FOR OSHA 500, 501, 502, 503, 5029, 5039, 5400, 5402, 5600 and 5602 You must be approved to take these courses. To obtain a Verification of Enrollment: • Please download the form from the OSHA 500, OSHA 501, OSHA 502, OSHA 503, OSHA 5029, OSHA 5039, OSHA 5400, OSHA 5402, OSHA 5600 and OSHA 5602 course pages at OSHA.UCSD.EDU • Request by email at [email protected] • Or call (800) 358-9206 If you have been approved, please provide us with the date of your approval. Approval Date: ________________________________



• Company’s complete name and address • Purchase order number • Invoicing address and telephone number • Point of contact (name, email and telephone number) • Student’s name, social security number, telephone number, mailing address and email

Enrollment Form

REFUND POLICY • Cancellations must be made at least two weeks prior to the course start date to be eligible for a refund. • Transfer requests prior to two weeks will be honored. • Transfers within the two weeks prior to the course start date will be allowed one time only. • Students who do not show up for class and do not call will not be refunded or transferred to another section.

PURCHASE ORDER ENROLLMENTS All purchase orders must be provided on company letterhead. Faxed POs will be accepted; however, the original PO must be received in our office at the address above within five business days from the date the fax was received. Individuals with questions regarding purchase orders should telephone (858) 534-3117. UCSD Extension requires the following information on all purchase orders submitted:

• Section ID number, course title, course dates, and course fee • Authorizing signature(s) • Payment terms are net 30 days

(800) 358-9206 • osha.ucsd.edu

29

OCCUPATIONAL SAFETY AND HEALTH DEPARTMENT

9500 Gilman Dr., Dept. 0170-M La Jolla, CA 92093-0170

Non-Profit Org. U.S. Postage PAID San Diego, CA Permit No. 1909

Earn Your UC San Diego Hard Hat!

SU15-1002

See page 5 for more details.

Cert no. XXX-XXX-000

Not Printed at State Expense

Certificate Programs Professional Certificate

Safety Specialist Certificate

The UCSD Professional Certificate in Occupational Safety and Health provides experienced safety professionals important workplace knowledge and practical experience regarding safety and safety standards. Professional Certificates offer concentrated study in areas directly applicable to many jobs and can add breadth and depth to existing knowledge and skills. You can elect a single certificate in Construction or General Industry, or a Dual Certificate in both areas.

The Safety Specialist Certificate was designed by the Occupational Safety and Health Department at UC San Diego Extension and the Associated Builders and Contractors, San Diego Chapter (ABC). It is an intensive, cohort-based program that combines in-class education with associated skills practice. Included in the certificate program topics are all items necessary for individuals to prepare for entry-level safety jobs in the construction industry, including an on-the-job internship.

Fundamentals Certificate

The Public Sector Safety and Health Fundamentals Certificate Program supports OSHA’s mission by training public sector employees in occupational safety and health to reduce incident rates for workers in state and local governments (the certificate program is highly applicable to private industry workers as well). Participants can choose from a variety of topics such as occupational safety and health standards for construction or general industry, safety and health management, accident investigation, fall hazard awareness, and recordkeeping.

For more information on Certificate Programs, see page 6 or visit osha.ucsd.edu

Home of the

TRAINING INSTITUTE EDUCATION CENTER