2013 YZF-R1 Racing Kit Parts The racing kit for YAMAHA 2013 YZF-R1 includes the following parts: 1. Basic engine kit 2. Optional parts for engine 3. Optional parts for chassis 4. Parts for Old model 5. Parts for Tool
Definition of M and N M = Spec change and interchangeable with previous model N = New 2013 parts, or no interchangealbe with previous model
1. Basic engine parts This kit set is made to improve the engine performance for racing purpose. This set is prepared within the FIM SBK Regulations as known at this current date. *Each part should be ordered individually.
1. Basic engine parts Part number
Part name
Details Set of spark plugs R0465B-10 of NGK.(Semi-surface discharge) The set contains 4 plugs. This gasket is made to adjust the squish height. 14B-11181-70: t =0.30 mm (Standard: t =0.40 mm)
14B-R465B-70
SPARK PLUG SET, Set of 4 NGK spark plugs R0465B-10 (Semi-surface discharge)
14B-11181-70
GASKET CYLINDER HEAD, t =0.30 mm (Standard: t =0.40 mm)
14B-12170-71
SHAFT CAM 1, (intake, modified working angle and high lift) Working angle and lift have been changed to improve output.
Cam-profile is changed.Use this camshaft together with kit valve spring set. Use this cam together with the spring. No other combination is allowed to use. Use this set together with kit camshaft.(14B-12170/12180-71) 14B-A2110-72 VALVE SPRING SET, for high lift camshaft This Air Funnel SET, which matches with 14B-12170/12180-70 KIT Camshaft, is the combination of MGC-021008-10 AIR FUNNEL SET A ＭＧＣ-021008-00 (Primary Funnel) and ＭＧＣ-Ａ220909-00(Secondary Funnel). This Air Funnel SET is the the combination of New Primary Funnel and New Secondary Funnel, which MGC-021008-20 AIR FUNNEL SET B match with 14B-12170/12180-71 Camshaft. THROTTLE BODY CLAMP SET, for easy disassembly of the throttle body This part is used for easy disassembly of the throttle body from the engine. 14B-1351A-70 AIS PLUG SET, needs to be used when the AIS (Air Induction System) is removed. These plugs need to be used when the AIS (Air Induction System) is removed. 5VY-A4890-70 This parts is higher spring rate than standard springs. 4B1-A6330-70 CLUTCH SPRING SET, higher spring rate ACM SET, small inner rotor type generator. ACM cover is included. This is a small inner rotor type generator. ACM cover is included. 14B-F1400-70 14B-15411-70 COVER CRANKCASE 1 This part is for repair 14B-15414-70 COVER CARBON This part is for repair WIRE HARNESS SET, for racing use, lighter weight This wire harness is designed for racing use, which is lighter weight than STD one. The connector for 2D 1KB-F2590-70 than stock item. Connector for 2D data logging data logging is included. The traction control function was added. included. Use this WIRE HARNESS together with 1KB-8591A-70 ECU SET. No other combination is allowed to 14B-12180-71
SHAFT CAM 2, (exhaust, modified working angle and high lift)
1KB-8591A-70
ECU SET, to adjust amount of fuel injection, ignition timing, etc.through PC. Two basic control data: SB (Superbike) and ST (SuperStock) CD-ROM, software manual and kit manual included
13S-8533A-71
CABLE INTERFACE, USB type connector for connecting ECU to PC
Enable to adjust the amount of fuel injection, ignition timing and etc, to use this ECU with kit wire harness. The traction control function was added. There are two types of basic control data for the ECU: SB (Superbike) and ST (SuperStock) CD-ROM, software manual and kit manual are included in this set. Use this ECU together with std camshafts and valve springs or with (YEC) 14B-12170/12180-71 SHAFT (YEC) 14B-A2110-72 VALVE SPRING. No other combination The cable for connecting ECU CAM to PC and which is USB type. The device driver of the cable interface is "Windows 7" correspond
2. Optional engine parts These parts are utilities for further improving engine performance.
2. Optional engine Parts Part number 14B-MAINT-72
Part name MAINTENANCE SET, for 3 engine revisions
14B-13414-70
GSKT STRAINER (for repair)
14B-15461-70
GSKT COVER 2 (for repair)
14B-15456-70
GSKT 1 (for repair)
14B-11181-80
GASKET CYLINDER HEAD, t =0.35 mm (Standard : t =0.40 mm)
14B-11181-90
GASKET CYLINDER HEAD, t =0.45 mm (Standard : t =0.40 mm)
14B-11351-70
GASKET, CYLINDER t=0.10mm
14B-11351-80
GASKET, CYLINDER t=0.15mm
14B-116A0-70
PISTON SET（STD）
14B-1165B-70 14B-11400-70
CONNECTING ROD SET（STD) CRANK SHAFT （STD)
4C8-A6377-70
SLIPPER CLUTCH SETTING SET, for adjusting standard slipper clutch
4C8-16377-70
NUT LOCK (for repair)
4B1-16391-70
SHIM (for repair)
14B-17401-70-A 14B-17401-80-C 14B-17121-70-A 14B-17121-80-B 14B-17131-AA 14B-17131-AB 14B-17131-AC 14B-17131-BB 14B-17131-BA
MAIN AXLE ASSY. A MAIN AXLE ASSY. C GEAR 2ND PINION A GEAR 2ND PINION B GERA 3RD PINION AA GERA 3RD PINION AB GERA 3RD PINION AC GERA 3RD PINION BB GERA 3RD PINION BA
Details This set includes the kit head-gaskets, (t =0.30mm), anti stick cover gaskets and standard base gasket, oilseal and other parts for engine maintenance. With these parts you can rebuild 3 engines. This part is for repair This part is for repair This part is for repair Gasket thickness has been changed to create higher compression ratio. 14B-11181-80: t =0.35 mm (Standard : t =0.40 mm) Gasket thickness has been changed to create higher compression ratio. 14B-11181-90: t =0.45 mm (Standard : t =0.40 mm) Recommended for Endurance This part is able to adjust the squish height. 14B-11351-70: t =0.10 mm 14B-11351-80: t =0.15 mm (Standard: t =0.20 mm) This piston set is uniform weight of four production pistons. Piston ring set, piston pin and circlip are included in this set. This connecting rod set is uniform weight of four production connecting rod. This crank shaft is optimum selected well balanced of the production crank shaft. This set includes the nut lock and shim (3pcs). To adjustment setting for OEM Back torque limiter This part is for repair This part is for repair
Please refer other sheet for details You can order each gear individually and all gears are interchangeable.
Please refer other sheet for details You can order each gear individually and all gears are interchangeable. 14B-17131-BC 14B-17131-CC 14B-17151-70-A 14B-17151-80-B 14B-17161-70-A 14B-17161-80-B 14B-17161-90-C 14B-17402-70 14B-17211-70-A 14B-17211-80-B 14B-17211-90-C 14B-17221-70-A 14B-17221-80-B 14B-17221-90-C 14B-17231-70-A 14B-17231-80-B 14B-17231-90-C 14B-17241-70-A 14B-17241-80-B 14B-17241-90-C 14B-17251-70-A 14B-17251-80-B 14B-17251-90-C 14B-17261-70-A 14B-17261-80-B 14B-A7000-70
GERA 3RD PINION BC GERA 3RD PINION CC GEAR 5TH PINION A GEAR 5TH PINION B GEAR 6TH PINION A GEAR 6TH PINION B GEAR 6TH PINION C DRIVE AXLE ASSY. GEAR 1ST WHEEL A GEAR 1ST WHEEL B GEAR 1ST WHEEL C GEAR 2ND WHEEL A GEAR 2ND WHEEL B GEAR 2ND WHEEL C GEAR 3RD WHEEL A GEAR 3RD WHEEL B GEAR 3RD WHEEL C GEAR 4TH WHEEL A GEAR 4TH WHEEL B GEAR 4TH WHEEL C GEAR 5TH WHEEL A GEAR 5TH WHEEL B GEAR 5TH WHEEL C GEAR 6TH WHEEL A GEAR 6TH WHEEL B MISSION MAINTENANCE SET (5sets of circlip and 3sets of collar, washer and bearings) SPROCKET DRIVE, 14T fits 520 chain SPROCKET DRIVE, 15T fits 520 chain SPROCKET DRIVE, 16T fits 520 chain SPROCKET DRIVE, 17T fits 520 chain
This drive axle is assembled bearings.
Please refer other sheet for details You can order each gear individually and all gears are interchangeable.
Please refer other sheet for details You can order each gear individually and all gears are interchangeable.
This set includes 5sets of circlip and 3sets of collar, washer and bearings. This is a lightweight drive sprocket. There are 3 types of sprockets (14,15, 16 and 17T) for size 520 drive chain.
14B-17460-74 4XV-17460-75 4XV-17460-76 4XV-17460-77 4C8-A7463-70
SPROCKET NUT SET, to be used with kit sprocket drive This part is for the drive sprocket of the kit with lock washer.
14B-F4350-71
HEAD LIGHT HARNESS SET, for endurance racing, used together with kit wire-harness
This set is for endurance racing. It has two circuits in the system. And it has an independent switch to turn on the taillight in case of emergency. Use this set together with the kit wire-harness.
3. Optional parts for chassis These chassis parts should be used to complete the machine for the racing purpose.
3. Optional chassis parts Part number 14B-C1707-70
Part name OIL CATCH TANK SET
Details This is a catch tank made of aluminum.
14B-23102-71
FR. FORK ASSY. LH.
14B-23103-70
FR. FORK ASSY. RH.
14B-23141-70 14B-23141-75 14B-23141-80 14B-23141-85 13S-24713-70 14B-C6300-80
SPRING, FR. FORK (11.0N/mm) SPRING, FR. FORK (10.5N/mm) SPRING, FR. FORK (10.0N/mm) SPRING, FR. FORK (9.5N/mm) CUSHION SEAT THROTTLE SET (Type of no separate throttle wire)
1KB-26281-70
CAP, GRIP UPPER (for repair)
5SL-26243-71
TUBE, GUIDE (for repair)
2C0-26391-70 14B-26301-70
CLIP, WIRE 1 (for repair) WIRE, THROTTLE 1 (for repair)
14B-26302-70
WIRE, THROTTLE 2 (for repair)
14B-C6300-70
THROTTLE SET (Type of separate throttle wire)
1KB-26281-70
CAP, GRIP UPPER (for repair)
5SL-26243-71
TUBE, GUIDE (for repair)
2C0-26391-70
CLIP WIRE (for repair)
14B-26311-70
WIRE THROTTLE 1 (for repair)
14B-26312-70
WIRE THROTTLE 2 (for repair)
14B-26313-70
WIRE THROTTLE 3 (for repair)
14B-2631J-70
WIRE THROTTLE 4 (for repair)
5FL-26244-70
SLIDER (for repair)
2C0-26261-70
CYLINDER (for repair)
5VY-26243-80
TUBE, GUIDE
14B-22210-70
SHOCK ABSORBER REAR
14B-22222-70 14B-22222-75 14B-22222-80 14B-22222-85
SPRING REAR SHOCK (108N/mm) SPRING REAR SHOCK (103N/mm) SPRING REAR SHOCK (98N/mm) SPRING REAR SHOCK (113N/mm)
14B-C2127-70
MACHINE HEIGHT ADJUSTMENT SHIM SET
1KB-25100-70
Fr SPARE WHEEL ASSY
4C8-25300-70 4C8-25441-71 4C8-25442-71 4C8-25443-71
Rr SPARE WHEEL ASSY Rr. SPROCKET 41T Rr. SPROCKET 42T Rr. SPROCKET 43T
This front fork is designed for specialized in racing use. The outer forks itself are same as standard, but the internal parts such as the dampers and springs are modified. The Inner Tubes are applied with TiO (Titanium Oxide coating) for reducing friction. This spring must be used exclusively for the KIT Front Fork of 14B-23102/23103-70. (KIT-STD spec is 14B-23141-80 (10N/mm) *It is included in the KIT-Fr. FORK ASSY) It needs a pair of springs for one vehicle. This cushion seat is nonslip type sponge with dimples. This is short stroke throttle set for sprint racing. This part is for repair This part is for repair This part is for repair This part is for repair This part is for repair This is short stroke throttle set for endurance racing which has separate type of throttle wires (quick release system) to improve maintainability. This part is for repair This part is for repair This part is for repair This part is for repair This part is for repair This part is for repair This part is for repair This part is for repair This part is for repair Progressive type of tube guide This shock absorber rear is designed for specialized in racing use. The appearance is the same as the standard, though the internal parts such as the dampers and springs are modified. This spring must be used exclusively for the KIT SHOK ABSORBER of 14B-22210-70. (KIT-STD spec is 14B-22222-75 (103N/mm) *It is included in the KIT-SHOCK ABSORBER REAR)
This is a shim set for adjusting machine height. This includes 1mm and 2mm shims. These are applicable to both KIT rear shock absorber and STD rear shock absorber.
This is standard type front wheel assembly which is assembled the bearings. The brake discs are not included. This is standard type rear wheel assembly which is assembled the bearings. The brake discs are not included. #520 41T #520 42T #520 43T
4C8-25444-71 4C8-25445-71 4C8-25446-71 4C8-25447-71 4C8-25448-71 4C8-25449-71 4C8-25450-71 4C8-25451-71 4C8-25452-71 1KB-28130-70
#520 44T #520 45T #520 46T #520 47T #520 48T #520 49T #520 50T #520 51T #520 52T
Rr. SPROCKET 44T Rr. SPROCKET 45T Rr. SPROCKET 46T Rr. SPROCKET 47T Rr. SPROCKET 48T Rr. SPROCKET 49T Rr. SPROCKET 50T Rr. SPROCKET 51T Rr. SPROCKET 52T REPAIR SET
Dashboard, Sw.Handle, Rotor Sensor and Fr. Wheel Sensor Assy are included. (STD
4. Old model parts Some parts for old models are also available.
4. Old model parts Part number 5VY-F2590-71 5VY-8591A-72 4C8-F2590-71 4C8-8591A-70 4C8-F2590-81 4C8-8591A-80 14B-F2590-70 14B-8591A-72 5VY-11181-70 5VY-11181-80 4C8-11181-70 4C8-11181-80 5VY-11351-70 5VY-11351-80
Part name
Details
This is kit wire harness set for 2004~2006 YZF-R1 This is kit wire harness set for 2007 YZF-R1 This is kit wire harness set for 2008 YZF-R1 This is kit ECU set for 2004~2006 YZF-R1 This is kit ECU set for 2007 YZF-R1 This is kit ECU set for 2008 YZF-R1 This is kit wire harness set for 2009~2011 YZF-R1 This is kit ECU set for 2009~2011 YZF-R1 GASKET CYLINDER HEAD, for 2004-2006 YZF-R1 (t=0.30mm) This is kit head-gasket (t=0.30mm) for 2004~2006 YZF-R1 GASKET CYLINDER HEAD, for 2004-2006 YZF-R1 (t=0.35mm) This is kit head-gasket (t=0.35mm) for 2004~2006 YZF-R1 GASKET CYLINDER HEAD, for 2007-2008 YZF-R1 (t=0.30mm) This is kit head-gasket (t=0.30mm) for 2007~2008 YZF-R1 GASKET CYLINDER HEAD, for 2007-2008 YZF-R1 (t=0.35mm) This is kit head-gasket (t=0.35mm) for 2007~2008 YZF-R1 GASKET CYLINDER, for 2004-2008 YZF-R1 (t=0.10mm) This is kit head-gasket (t=0.10mm) for 2004~2008 YZF-R1 GASKET CYLINDER, for 2004-2008 YZF-R1 (t=0.15mm) This is kit head-gasket (t=0.15mm) for 2004~2008 YZF-R1 WIRE HARNESS SET, for 2004-2006 YZF-R1 ECU SET, for 2004-2006 YZF-R1 WIRE HARNESS SET, for 2007 YZF-R1 ECU SET, for 2007 YZF-R1 WIRE HARNESS SET, for 2008 YZF-R1 ECU SET, for 2008 YZF-R1 WIRE HARNESS SET for 2009-2011 YZF-R1 ECU SET for 2009-2011 YZF-R1
5. Tools
5. Tools Part number
Part name
ADJUSTMENT TOOL for valve timing basic kit, MGC-A3589-80 including TDC DETECTING TOOL MGC-A3108-7-01 TDC DETECTING TOOL MGC-A09100800 ATTACHMENT TOOL for camshaft for 2009~2013 R1 MGC-A310808-00 MEASURING TOOL REAR HIGHT for 2008~2013 R1
Details The valve timing can be measured. Including in ADJUSTMENT TOOL for valve timing Dial gauge base Rear hight measuring tool
MGC-A290908-00 PISTON and PISTON RING INSTALLATION TOOL for 2009~2013 R1 The piston and piston ring can be easily installed. MGC-A151009-00 REMOVING AIR FUNNEL TOOL for 2009~2013 R1Air funnel removal tool MGC-A141009-00 REMOVING / INSTALLING TOOL for ACM rotor for R6 & R1 ACM removal tool STORAGE BOX for valves, valve springs and valves, valve springs and retainers with MGC-A3108-07-06 retainers with VALVE ASSEMBLY BOARD VALVE ASSEMBLY BOARD MGC A3108-07-05 SQUISH TOOL to measure clearance between piston and cylinder measure clearance between piston and cylinder
