Wheels & Tires Prices subject to change Co 7/16-20

Thomas Flyer Wood Wheel Bolt

$25.75 TF-0001 7/16-20 Front wheel bolt for use on Thomas Flyer wooden wheels. Material: 4140 Steel, heat treat grade 8; Finish: Natural; Thread: 7/16-20; Thread length: 1.350; OAL: 3.625; Length under head: 3.350; Head OD: .900; Shaft OD: .4375 Co 1931

Chrysler Imperial Lug Bolt

$18.75 CHR-0003 Steel lug bolt for 1931 Chrysler Imperial wheel hubs, may also fit other years. This bolt is made from 4140 steel heat treated to grade 8. 9/16-18 thread size, 1 7/8 OAL, 7/8 hex, .556 OD above thread, thread length is 7/8, head is approx. .437 tall. Co Isotta

Fraschini Lug Nut

$23.25 MISC-0317 Brass lug nut with an M14-1.50 thread for use on Isotta Fraschini. Material: Brass; Finish: Natural; Thread: M14 x 1.5; Thread length: 18mm; OAL: 26mm; OD: 26mm; Hex: 18mm; Length under head: 17mm Co 7/16-14

Wood Wheel Bolt, Short

$18.25 MIT-0001 Wood wheel bolt with 7/16-14 thread. Used for clamping the spoke in the steel hub for wooden wheels as used on 1912 Mitchell and possibly others. Material: 4140 Steel, heat treated to grade 8; Finish: Natural; Thread: 7/1614; Thread length: 1.365; OAL: 2.725; Head: .763 OD x .350; Length under head: 2.375

Version 1/20/2016

Co 7/16-14

Wood Wheel Bolt, Long

$18.25 MIT-0002 Wood wheel bolt with 7/16-14 thread. Used for clamping the spoke in the steel hub for wooden wheels as used on 1912 Mitchell and possibly others. Material: 4140 Steel, heat treated to grade 8; Finish: Natural; Thread: 7/1614; Thread length: 1.365; OAL: 3.015; Head: .763 OD x .350; Length under head: 2.665 Co 1933-36

Packard V-12 & Auburn Wood Wheel Bolt

$18.25 P-0096 Wheel bolt for use on 1933-1936 Packard V-12's using wood wheels. This bolt is the same as used on Auburns with wood wheels except this bolt is approximately three threads longer. Bolt can be trimmed for use, if needed. Packard part number 197945, "Wheel Bolt (Wood)". Fits Packard models: 1001-04, 1100-05, 1200-05, 1400-05. Material: 4140 steel, heat treated to grade 8; Finish: Cadmium; Thread: 9/16-18; OAL: 3.00; Hex: 3/4; Head height: .580 Co 1913

Packard Wheel Anchor Bolt

$8.25 P-0173 Steel threaded bolt with anchor shaped head. Used on the wheels of 1913 Packard. Material: Steel; Finish: Natural; Thread: 1/2-18; Thread length: 1.062; OAL: 3.750; OD: .468; Length under head: 3.400; Head: 1.250 L x .774 W; Head thickness: .180

Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA

1

Wheels & Tires Prices subject to change Co 1928-32

Packard Disc Wheel Lug Bolt

$12.25 P-0128 Packard lug bolt used on 1928 - 1932 V-8's with disc wheels. This is an accurate reproduction from a 1929 Packard. Packard part number 146106. For use on: 1928 526, 533; 1929 626, 633; 1930 726, 733; 1932 826, 833; 1932 901, 902 Material: 4140, heat treat grade 8; Finish: Natural; Thread: 5/8-18; Thread length: 1.00; OAL: 2.072; Head hex: 3/4; Head height: .782; Length under head: 1.290 Co 1929

Valve Stem Nut

$10.50 MISC-0259 Stainless steel 12mm x 1.0 hex nut for use on Cord L-29 and othe cars using Schrader bent metal valve stems. Material: Stainless steel; Thread: 12mm x 1.0; Hex: 17.5mm (.6875); Hex height: 5.75mm (.226); Height: 8mm (.320); Non hex OD: 15.5mm (.608) Co Rolls

Royce Phantom II Hub Cap Screw

$18.75 RR-0016 Steel slotted screw to fit in center of wheel nut on Rolls Royce Phantom II.

Packard Lug Bolt

$15.50 P-0116-B Lug bolt for use on 1929 Packard 633, may also fit other years and models. Note: Head shape has been slightly modified from the original bolt. Packard part number 146107. Material: 4140 Steel; Heat treat grade: 8; Finish: Natural; Thread: 9/16-18; Thread length: .775; OAL: 4.04; Hex: 3/4; Length under head: 3.225; Head DIA: 1 1/16; Shaft DIA: 6/16 Quantities of 8 or more: $10.00 each piece. Discount is limited to stock on hand. Co 1931

Co Schrader

Bentley Wheel Weight Carriage Bolt

Material: 12L14; Finish: Natural; Thread: BSP 1/4-19; OD of thread: .515; Thread length: .250; OAL: .542; Length under head: .357; Head OD: .625 Co Rolls

Royce PII Wheel Balance Weight Stud Nut

$21.25 MISC-0170 Nut to retain wheel balance weights installed on the wheel rim of Rolls Royce Phantom II. Material: 12L14; Finish: Natural; Hex: 29/64; OD: .450; OAL: 1/2; Groove OD: 3/8 Co 7/16-14

Wood Wheel Bolt, Hub

$13.00 BENT-0005 CNC Machined steel wheel weight carriage bolt with a 1/4-26 thread. For use on 1931 Bentley with Rudge wheels.

$20.75 NAT-0002 7/16-14 Steel bolt used on the hub of wooden automobile wheels such as those used on 1910 National and possibly other early cars.

Material: 12L14; Finish: Natural; Thread: 1/4-26; Thread length: .546; Head OD: .625; OAL: 2.589; Length under head: 2.453; Shaft OD: .241

Material: 4140, heat treat grade 8; Finish: Natural; Thread: 7/16-14; Thread length: .843; OAL: 3.545; Length under head: 3.250; Head OD: .967; Shaft OD: 4.37; Square block: .437 x .437 x .380

Version 1/20/2016

Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA

2

Wheels & Tires Prices subject to change Co 7/16-14

Wood Wheel Bolt, Rim

$25.75 NAT-0001 7/16-14 Steel bolt used on the rim of wooden automobile wheels such as those used on 1910 National and possibly other early cars. Knurling grips the wood and prevents the bolt from spinning once installed.

Underslung Wheel Bolt

$13.00 MISC-0366 American Underslung wheel bolt. Used to hold the wheel hub in the wood wheel. Duplicate of an original part from a 1910 Traveller. Material: Steel; Finish: Black oxide; Thread: 3/8-24; Thread length:.750; Head OD: .750; Head thickness: .270; Length under head: 2.45; OAL: 3.470 Co Buffalo

Wheel Wrench Tool Bag

$77.25 J-6954-1 Canvas bag to hold Buffalo wheel wrench for C6 Buffalo wire wheel hubcaps. For use with many cars using C6 Buffalo wire wheels including: Duesenberg, Cadillac, Lincoln, DuPont. Wheel wrench not included. Co Buffalo

Rudge Wheel Spanner Wrench

$257.50 A-4829 Steel spanner wrench for 80mm Rudge wheels as used on Duesenberg Model A and other automobiles. CNC milled from 4140 high strength steel. Duplicate of the original design.

Material: 4140, heat treat grade 8; Finish: Natural; Thread: 7/16-14; Thread length: 1.093; OAL: 3.425; Length under head: 3.085; Head OD: .750; Square block: .475 x .475 x .084; Knurl length: .525 Co American

Co 80mm

Co Duesenberg

A Hubcap Wrench

$206.00 MISC-0305 Custom made CNC machined aluminum hubcap wrench for use on Duesenberg Model A. Material: Aluminum; OAL: 10.00; OD: 4.375; Hex ID: 3.187; Thickness: .375; Hole: .500 Co Buffalo

Wire Wheel Hubcap Tension Spring

$7.75 J-6370 Buffalo wire wheel hubcap tension spring. Fits inside the hubcap to keep the center in place. These have been produced in the correct length, diameter and wire gauge as the original springs. Quantity of four used per hubcap. Measures:1.541 OAL, .378 OD, .056 wire diameter. Co Duesenberg

C4 Wheel Wrench Tool Bag

$67.00 MISC-0196 Leather trimmed tool bag for a Buffalo Wire Wheel wrench with an opening of 3 1/4. Made to fit wrenches with "6505B" cast into them.

Model J Hubcap Emblem

$24.25 J-6310 New Model J Duesenberg hubcap emblem tag with red enamel letters. DIA: 1.691

Length: 16.00; Width top: 7.00; Width bottom: 3.00

Version 1/20/2016

Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA

3

Wheels & Tires Prices subject to change Co Bugatti

Co 1937

Type 49 Hubcap

$180.25 BUG-0052 New aluminum hubcap for Bugatti Type 49. This aluminum casting with the "EB" logo has been fully machined for use. Limited quantity available.

$15.50 CAD-0087 Laser cut steel lock plate for the rear wheels on 1937 Cadillac. Material: Steel; Finish: Natural; Thickness: .060; Width: 1.795; Length: 2.797; ID: 1.163; "U": .370 x .343, radius of 1.75

DIA: 6 1/2; Width: 2 1/4

Co Rim

Cadillac Rear Axle to Brake Drum Nut Lock

Plate

Type Wheel Weight

$16.50 MISC-0001 Cast bronze wheel weight that fits over the edge of drop center rims and is retained by a set screw.

Co Bugatti

T57 Front Wheel Bearing Lock Plate

$11.00 BUG-0001 Laser cut steel lock plate to hold Type 57 front wheel bearings.

Co Dupont

Front Wheel Bearing Washer

$20.75 MISC-0301 Laser cut steel front wheel bearing washer for Dupont model 993.

V-16 Rear Wheel Bearing Lock Plate

$15.50 CAD-0036 Cadillac V-16 rear wheel bearing retaining nut lock plate. Manufactured from hot rolled steel.

V8 Rear Wheel Lock Plate, Small

$15.50 CAD-0088 Laser cut rear axle to brake drum nut lock plate for use on the following Cadillac and LaSalle V8 models: 1936 Cadillac 36-60; 1934 - 1936 LaSalle 350, 35-50, 36-50. Cadillac part number 231254, group number 2.0239. Material: Steel; Finish: Natural; Length: 2.460; Width: 1.642; Thickness: .057; ID: 1.000; Cutout DIA: .453 Co Nil

Melior Wheel Disc Valve Door Namplate

$36.25 RR-0001 Nil Melior engraved nameplate used on the inflation valve access door for various sized wheel discs including those used on Rolls Royce PII and many Brewster bodied cars. Material: Aluminum; Finish: Natural; OD: 1.978; Thickness: .062; Holes: .150; Hole centers: 1.250 Co Nil

Material: Steel; OD: 2.177; ID: .885; Thickness: .132; Tab: .281 x .156

Co Cadillac

Co Cadillac

Melior Wheel Disc Valve Door Spacer Plate

$20.75 RR-0005 Brass spacer plate used in the inflation valve access door assembly on various sizes of wheel discs including those used on Rolls Royce PII and many Brewster bodied cars. Material: Brass; Finish: Natural; Length: 1.750; Width: .625; Thickness: .065; Folded thickness: .125; Holes: .157 ID, .620 centers

Measures: 2.285 ID x 2.890 OD, spikes are approx. .400 long x .325 wide tapering to .132.

Version 1/20/2016

Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA

4

Wheels & Tires Prices subject to change Co Nil

Melior Wheel Disc Valve Door Plate Spring

$39.75 RR-0003 Spring plate for the inflation valve access door assembly used on various sized wheel discs including those used on Rolls Royce PII and many Brewster bodied cars.

Co Dyna

Beads Filtered Valve Core

$2.75 GTI-COR-0120 Filtered valve core for use with Dyna Beads tire balancing beads. Required for use when Dyna Beads are installed to keep beads from escaping when adding air or checking tire pressure. .

Finish: Painted; Thickness: .062; Length: 3.187; Width: .500; Holes: .157 ID, .620 centers Co Nil

Melior Wheel Disc Valve Door Backing Plate

$57.25 RR-0002 Backing plate for the inflation valve access door assembly used on various sized wheel discs including those used on Rolls Royce PII and many Brewster bodied cars.

Co Dyna

Beads Applicator

$4.00 GTI-APP-01 Dyna Beads applicator bottle and fill tube. For use in placing beads in tire.

Material: Steel; Finish: Painted; Thickness: .042; Length: 4.227; Width: 2.555; Holes: .150 ID, 1.250 centers Co Tucker

Hubcap Emblem Backing Plate

$25.75 TUC-0002 Steel backing plate for the hubcap emblems on Tucker automobiles. Material: Steel; Finish: Black epoxy primer; OD: 3.662; Thickness: .045; Holes: .192, centers 1.437

Co Dyna

Beads

Varies GTI-DSB-66, GTI-DSB-22 Dyna Beads tire balancing beads for use in motorcycles and automobiles. Available in two sizes: 6 ounces ($14.75) or 2 ounces ($7.25). 6 ounce bag is recommended for large full size tires such as those used on antique & classic cars. 2 ounce bag is recommended for motorcycle tires typical use is 2 ounces in the rear tire and 1 ounce in the front. Filtered valve core and applicator sold separately.

Version 1/20/2016

Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA

5