-PRODUCT MAGAZINE- Decorative, Safety, Privacy, Automotive, UV & Heat Glass Film

-PRODUCT MAGAZINEDecorative, Safety, Privacy, Automotive, UV & Heat Glass Film Decorative Film View Now Solar Film View Now Frosted Film View N...
Author: Geoffrey Cox
6 downloads 0 Views 2MB Size
-PRODUCT MAGAZINEDecorative, Safety, Privacy, Automotive, UV & Heat Glass Film

Decorative Film

View Now

Solar Film

View Now

Frosted Film

View Now

Static Cling Film

View Now

Architectural Film

View Now

Safety Film

View Now

Bathroom Film

View Now

Automotive Film

View Now

Stained Glass

Coloured Film

View Now

View Now

Dichroic Film

Printable Film

View Now

View Now

Speciality Film

Opaque Film

View Now

View Now

Tools & Application

View Now

In this category you will find our broad selection of plain and decorative frosted films. These films are designed with a variety of transparencies and light transmissions providing different degrees of privacy. Spec sheets are available upon request.

SX-1002 Clear Sand Blast 152cm wide

SX-1409 Sand Matt 121cm wide

SXGF-0197 Light Etch 152cm wide

SX-3140 Dusted Crystal 122cm, 152cm wide

SXWF-WM White Matt 152cm wide

SX-324 Frosted Sparkle 122cm, 152cm wide

SXJ-0550 White Dusted Matt 152cm wide

SX-8210 Frosted Bamboo 122cm wide

SX-1545 Frosted Summer 152cm wide

SX-1546 Frosted Vine 152cm wide

SXWF-BM Bronze Matt 152cm wide

SXB-97 Blue Green Sand Blast 152cm wide

SXWF-SM Silver Matt 152cm wide

SXB-96 Steel Blue Sand Blast 152cm wide

SOLYX Architectural window films with stripes, squares and a variety of patterns. Films that provide semi obscurity with elegant design.

SX-C385 Etched Squares 122cm wide

SXC-4410 Frosted Squares 117cm wide

SX-C386 Pixela 122cm wide

SX-C375 Paracelli 122cm wide

SX-1801 Bronze Random Lines 122cm wide

SX-1801 White Random Lines 122cm wide

SX-C378 Alternating Etch and White Strip 122cm wide

SXC-1418 Frosted Stripe 117cm wide

SXC-3511 Frosted Stripe 122cm wide

SX-C361 Thin Etch Wavy Lines 122cm wide

SX-C380 Etched Organic Stripe 122cm wide

SXC-3510 Frosted Stripe 122cm wide

SX-C363 Plaid Etch 122cm wide

SX-C367 Fine Crossed Lines 122cm wide

SXC-131SR Short Stripe Mini Blind 122cm wide

SX-W3760 White Squares 152cm wide

SX-W3560 White Stripes 152cm wide

SX-C300 Dusted Etch 152cm wide

SX-1002 Clear Sand Blast 152cm wide

SXWF-BM Bronze Matt 152cm wide

SX-C333 Pin Point 122cm wide

SXWF-WM White Matte 152cm wide *Available in 37 and 50 Micron

SXGF-0197 Light Etch 152cm wide

SXWF-SM Silver Matt 152cm wide

SXJ-0500 Dot Gradation 152cm wide

SOLYX DECORATIVE FILM brings a unique finish to any glass surface in your home or office. With over 30 different options you will be able to make your home stand out from the rest.

SX-1546 Frosted Vine 122cm wide

SX-8210 Frosted Bamboo 122cm wide

SX-9000 Clear Waters 152cm wide

SX-1545 Frosted Summer 122cm wide

SX-3141 Dusted Leaf 152cm wide

SX-1549 Frosted Fall 122cm wide

SX-C444 White Waters 122cm wide

SX-C387 Linen 122cm wide

SXHE- 39 Clear Feathered 92cm wide

SX-3146 Organic Cotton 122cm wide

SXHE-1034 Ice Forest 92cm wide

SXLT- Cut Glass Flowers 90cm wide

SX-1507 Cut Glass Bubbles 90wide

SX-1508 Cut Glass Pebbles 90cm wide

SX-1509 Cut Glass Prism 90cm wide

SXHE- 02 Clear Brushed 92cm wide

SXG-0018 White Rice Paper 152cm wide

SOLYX Safety and Security Films are high strength Polyester films. Bring glass up to tempered safety standards and help hold glass together when struck! Blocks 99% of the UV rays.

PRODUCT:

SAFETY 4-MIL CLEAR

PRODUCT:

SAFETY 7-MIL CLEAR

Shading Coefficient …………………………… 0.96 Glare Reduction…………………………………. 1.6 % Total Solar Energy Rejected………… 16.5 % Total Solar Reflectance ………………… 7.8 % Total Solar Absorption…………………. 12.7 % Total Solar Transmittance……………. 79.5 % Visible Light Reflectance………………… 9.2 % Visible Light Transmission……………. 88.4 Luminous Efficacy…………………………… 0.92 % Ultraviolet Radiation Rejected up to 99% Emissivity………………………………………….. 0.88 “U” Factor……..( mild winter)…………… 1.08 Peel Strength…(lb./inch )………………… 5-7 lb./inch

Shading Coefficient …………………………… 0.97 Glare Reduction…………………………………. 2.6 % Total Solar Energy Rejected………… 15.6 % Total Solar Reflectance ………………… 8.6 % Total Solar Absorption…………………. 11.4 % Total Solar Transmittance……………. 80.0 % Visible Light Reflectance………………… 10.0 % Visible Light Transmission……………. 87.5 Luminous Efficacy…………………………… 0.90 % Ultraviolet Radiation Rejected up to 99% Emissivity………………………………………….. 0.87 “U” Factor……..( mild winter)…………… 1.07 Peel Strength…(lb./inch )………………… 5-7 lb./inch

Break Tensile………………………………………. Elongation at Break………………………….. Abrasion Resistance…………………………… Feet/Pounds of Energy………………………

Break Tensile………………………………………. Elongation at Break………………………….. Abrasion Resistance…………………………… Feet/Pounds of Energy………………………

60 lb./inch 150 % 5% 45.0

UV-B (wavelengths from 290nm - 320nm) and UV-A (wavelengths from 320nm - 390nm) are present in our living environment, from direct sunlight or reflection from snow, water, sands, glass windows, concrete walls etc. Performance data is based on this film being applied to the inside of 1/8” clear monolithic annealed glass. This data is based upon tests and information believed to be reliable, but users should not rely upon it absolutely for specific applications since performance properties will vary with processing conditions.

60 lb./inch 185 % 5% 75.0

UV-B (wavelengths from 290nm - 320nm) and UV-A (wavelengths from 320nm - 390nm) are present in our living environment, from direct sunlight or reflection from snow, water, sands, glass windows, concrete walls etc. Performance data is based on this film being applied to the inside of 1/8” clear monolithic annealed glass. This data is based upon tests and information believed to be reliable, but users should not rely upon it absolutely for specific applications since performance properties will vary with processing conditions.

BLK-2060 100micron, 152cm wide Dark Black Tint– Visible Light Transmitted 20% A beautiful neutral non-reflective smash and grab film. Perfect for Residential, Commercial or Automotive application. Protects your interiors, cuts down heat, reduces glare, and protects you from flying glass. Glare Reduction 77% Total Solar Energy Rejected 59% Infra-Red Rejected 12% Ultraviolet Radiation Rejected 99%

BLK-3560 100micron, 152cm wide Medium Black Tint – Visible Light Transmitted 35% A beautiful neutral non-reflective smash and grab film. Perfect for Residential, Commercial or Automotive application. Protects your interiors, cuts down heat, reduces glare, and protects you from flying glass. Glare Reduction 59% Total Solar Energy Rejected 51% Infra-Red Rejected 11.1% Ultraviolet Radiation Rejected 99%

BLK-5060 100micron, 152cm wide LightBlack Tint – Visible Light Transmitted 50% A beautiful neutral non-reflective smash and grab film. Perfect for Residential, Commercial or Automotive application.Protects your interiors, cuts down heat, reduces glare, and protects you from flying glass.

Glare Reduction 44% Total Solar Energy Rejected 43% Infra-Red Rejected 10.1% Ultraviolet Radiation Rejected 99%

SX-0423 Rear Projection 152cm wide Rear Projection film is a flexible, self-adhesive film for application to glass. This film provides sharp, brilliant images with 120 degree viewing angles.

SX-0409-60 Duel Projection White 152cm wide Duel Projection film is a flexible, self-adhesive film for application to glass. This film allows for excellent viewing angles from both sides with no distortion.

SX-H001060 Holographic Projection Film 152cm wide Holographic Projection film is a flexible, selfadhesive film for application to glass. This is a translucent film still allowing visibility through the glass. This film allows for excellent viewing angles from both sides with no distortion.

One Way White Perforated 152cm wide One Way White Perforated Vinyl Window film. Exterior application. White on the outside, black on the adhesive face. White Perforated Window Film is a perforated flexible calendared film for use on one way visual panels. Graphics printed on this material are visible from the front and invisible from the back when mounted on windows

Ultrablock Silver 1560 Mirror 152cm wide One Way Privacy Films: SOLYX Mirrored Silver 15% privacy one way film provides excellent one way visibility. It provides daytime privacy. It allows you to see outside, but stops others from seeing in during the day. However, you can see in at night if you have lights on inside. You would still need window coverings at night as you can always see from the darker to the lighter side of the glass.

SX- White Dry Erase 152cm wide White Dry Erase Film. Transform any smooth surface, Glass, Walls, Wallboards into a Dry Erase Marker board.

SX-Clear Dry Erase 152cm wide Clear Dry Erase Film. Transform any smooth surface Glass, Walls, Wallboards - into a Dry Erase Markerboard.

One Way Privacy 30/70, 98cm wide SOLYX ONE WAY Privacy window film is designed for interior applications. The design of the black/white PVC material allows for one-way display applications and shading. This material is designed to provide the optimal level of privacy where needed. This film is applied dry and is very easy to install, fully DIY.

OUTSIDE View

SX-Anti-Fog Film 100cm wide xxx

SX-Anti-Graffiti Film 152cm wide xxx

SOLYX SUPERIOR QUALITY Static Cling Non Adhesive Glass films are the newest addition to the ever expanding line of SOLYX quality films. Static-cling decorative film can be used on any smooth, non-porous surface. Installs in minutes. Looks great for years! Easy to clean, removable, and reusable. Improves privacy and security while allowing natural light to enter. Filters 99% of UV rays to protect carpets and furnishings from fading. Diffuses glare and softens harsh sun. Adhesive-free static cling window film removes easily and cleanly when it is time to redecorate.

SXLT- 1302 Clear Icicles 90cm wide

SX- SC534 Floret 90cm wide

SX-SC461 Bamboo 90cm wide

SX-SC513 Mosaic 90cm wide

SX-SC465 Sand 90cm wide

SX-SC305 Sheet Of Ice 90cm wide

SX-SC109 Neptune 90cm wide

SX-SC543 Stones 90cm wide

SX-SC507 Bubbles 90cm wide

SX-SC307 Flowers 90cm wide

SX-SC508 Pebbles 90cm wide

SX-SC462 Pixels 90cm wide

SX-SC477 Drops 90cm wide

SX-SC463 Axis 90cm wide

SX-SC555 Titanium 90cm wide

SX-SXWO White Out 137cm wide

SX-SC511 Gems 90cm wide

SX-SC507 Bubbles 90cm wide

SX-SC544 Rain 90cm wide

SX-SC489 Sapphire Ice 90cm wide

SX-SC108G Atlantis Mosaic 90cm wide

SX-SC488 Dogwood 90cm wide

SX-SC573 Stained Glass Atlantis 90cm wide

SX-1509 Prism 90cm wide

SX-SC514 Atlantis 90cm wide

SX-SC510 Facets 90cm wide

SX-SC0316 Silver 90cm wide

SX-SC005 Black Tint 90cm wide

SX-SC020 Blue Tint 90cm wide

SOLYX Engineered Films for Bathroom window or Shower door privacy. These films will provide adequate privacy day and night even with the lights on at night. These films can also be used in all other areas as well!

SX-1002 Clear and blast 152cm wide

SX-1409 Sand Matt 152cm wide

SX-SC465 Sand 90cm wide

SXWF-WM White Matt 152cm wide

SXB-97 Blue Green Sand Blast 152cm wide

SXB-96 Steel Blue Sand Blast 152cm wide

SX-1509 Prism 90cm wide

SX-SC461 Bamboo 90cm wide

SX-1507 Bubbles 90cm wide

SX-SC514 Atlantis 90cm wide

SX-SC513 Mosaic 90cm wide

SX-SC477 Drops 90cm wide

A Beautiful selection of original SOLYX Stained Glass Window Films. Now you can achieve that stained glass look at the fraction of the price of stained glass without compromising quality!

SX-SC488 Dogwood Static Cling 90cm wide

SX-SC489 Sapphire Ice Static Cling 90cm wide

SX-SX108G Atlantis Mosaic 90cm wide

SXEG-4861 Bottled 90cm wide

SXEG-1027 Abstract 92cm wide

SXEG-1025 Doves 92cm wide

SXEG-1026 Fish 92cm wide

SOLYX SXP are all Transparent, optically clear, coloured, polyester film with scratch resistance, protective coating. Gloss surface. Created for high-quality illuminated or stained glass designs, window graphics and back-lit glass surfaces. Visible Light Transmissions: 57% Infrared Transmission: 12%

Note: For interior application only.

SXP-020 Amber 152cm wide

SXP-057 Traffic Blue 152cm wide

SXP-031 Red 152cm wide

SXP-068 Grass Green 152cm wide

SOLYX Matte Coloured Vinyl are brilliant bright opaque colours, with a paper backing making it perfect for printing and plotting.

SXV-013 Red Matte 122cm wide

SXV-016 Blue Matte 122cm wide

SXV-014 Yellow Matte 122cm wide

SXV-015 Green Matte 122cm wide

SXV-012 Black Matte 122cm wide

SXV-011 White Matte 122cm wide

SOLYX BLK AUTOMOTIVE film is perfect for blocking heat and UV. A beautiful neutral colour; smash and grab film, non-reflective. The performance data on this film is remarkable. Tensile Strength at Break: 28, 500PSI Break Strength: 112 lb./inch Elongation at Break: 125% Peel Strength: 7 to 9 lb./inch Visible Light Transmissions: 37% Solar Absorption: 40% UV Blocking: 95% IR Rejection: 11.1% Visible Light Reflectance: 9% Shading Co-efficient: 0.78 Solar Heat Gain Co-efficiency: 0.68 U Value: 1.04 Emissivity: 0.95 Glare Reduction: 59% Total Solar Energy Rejection: 51% Infrared Transmission: 12%

152cm wide and can either be ordered by running meter or by 30m rolls.

BLK- 3560 50, 100 micron, 152cm wide

BLK-2060 50 / 100 micron, 152cm wide MECHANICAL PROPERTIES PASSES: ANSI Z97.1-1984 16 CFR 1201 U.S.G.S. Category 1: Break Strength 100PLI OPTICAL AND SOLAR PROPERTIES Visible Light Transmitted Ultraviolet Radiation Rejected Total Solar Energy rejection Visible light reflectance Shading Coefficient Solar heat gain Co-efficiency Glare reduction 77% I.R. Rejection 12% Solar Absorption 41% U Factor (mild winter) 1.04

21% 99% 59% 11% 0.75 0.65

BLK-5060 50 / 100 micron, 152cm wide MECHANICAL PROPERTIES PASSES: ANSI Z97.1-1984 16 CFR 1201 U.S.G.S. Category 1: Break Strength 100PLI OPTICAL AND SOLAR PROPERTIES

Visible Light Transmitted Visible Light Absorption Ultraviolet Radiation Rejected IR Rejection Visible light reflectance Shading Coefficient Solar heat gain Co-efficiency U Value Emissivity Glare reduction Total Solar Energy rejection

50% 38% 99% 10.1% 8% 0.80 0.69 1.07 0.95 44% 43%

SOLYX One Way Privacy 30/70 Privacy Film, 98cm wide

SOLYX ONE WAY Privacy window film is designed for interior/exterior applications. The design of the black/white PVC material allows for oneway display applications and shading. This material is designed to provide the optimal level of privacy where needed. Ideal for bakkie canopies or vehicles where clear vision is needed from the inside out and privacy needed from the outside. TECHNICAL PROPERTIES Caliper/Gauge: 8 mil (w/liner 15 mil) Ink: Dye & Pigment Weight: 370g Perforation: 0.060" (1.5mm) hole diameter Adhesive: Permanent (Solvent Adhesive) Adhesive on White surface Availability: 98cm x 50meter rolls Black/White PVC APPLICATION This product is applied without using water, the product must be applied to a clean surface free of any chemical or dirt of any kind. SOLAR PROPERTIES UV Transmission: 45% IR Transmission: 45% Visible Light Transmission: 35% Total Solar energy Rejected: 65% Ideal Storage Conditions: 70° F, 50% RH in original packaging ASTM E 84Standard Method of Test for Surface Burning Characteristics of Building Materials. Flammability Rating for SOLYX Frosted PVC and Polyester privacy films with adhesive when applied to surfaces- glass or plastic sheet: Horizontal Burn (Flame Spread) ASTM D-635 inch Less than 1.0 UL 94 Rating UL 94 UL Classification V-O Class A 0 -25 Flame Spread Index 0 -450 Smoke Developed Index

SOLYX Printable Film, below are some of our printable films that work with latex, solvent or/and UV Printers.

SX-3140 Dusted Crystal 122cm / 152cm wide

SX-1301 Clear Frost 152cm wide

SXB-97 Blue Green Sand Blast 152cm wide

SX-324 Frosted Sparkle 122cm / 152cm wide

SX-1002 Clear Sandblast 152cm wide

SXB-96 Steel Blue Sand Blast 152cm wide

SXV-013 Red Matte 152cm wide

SXV-016 Blue Matte 152cm wide

SXV-014 Yellow Matte 152cm wide

SXV-015 Green Matte 152cm wide

SXV-012 Black Matte 152cm wide

SXV-011 White Matte 152cm wide

SXGF-0197 Light Etch 152cm wide

SX-SC465 Sand Static Cling 90cm wide

One Way Perforated 152cm wide

SX-1409 Sand Matt 152cm wide

SX-SC009 Clear Static Cling 137cm wide

SOLYX Films UV PROTECTION FILMS have 99% Ultraviolet Rejection. Protecting all your interiors, carpets, wooden floors or furniture from the Suns harmful rays.

SX- BLK-2060, 152cm wide Available in 37, 50 & 100 micron Visible Light Transmitted 20% Glare Reduction 77% Total Solar Energy Rejected 59% Infra-Red Rejected 12% Ultraviolet Radiation Rejected 99% NON-REFLECTIVE

SX- BLK-EA0560 , 152cm wide Visible Light Transmitted 5% Glare Reduction 95% Total Solar Energy Rejected 54% Infra-Red Rejected 14% Ultraviolet Radiation Rejected 99% NON-REFLECTIVE

SX- BLK-3560, 152cm wide Available in 37, 50 & 100 micron Visible Light Transmitted 237 Glare Reduction 59% Total Solar Energy Rejected 51% Infra-Red Rejected 11.1% Ultraviolet Radiation Rejected 99% NON-REFLECTIVE

SX- BLK-EA2560, 152cm wide Visible Light Transmitted 25% Glare Reduction 79% Total Solar Energy Rejected 41% Infra-Red Rejected 13% Ultraviolet Radiation Rejected 99% NON-REFLECTIVE

SX- BLK-5060, 152cm wide Available in 37, 50 & 100 micron Visible Light Transmitted 51% Glare Reduction 44% Total Solar Energy Rejected 43% Infra-Red Rejected 10.1% Ultraviolet Radiation Rejected 99% NON-REFLECTIVE

SX- BLK-EA3560 ,152cm wide Visible Light Transmitted 35% Glare Reduction 59% Total Solar Energy Rejected 39% Infra-Red Rejected 11.1% Ultraviolet Radiation Rejected 99% NON-REFLECTIVE

SX- CH1060- Charcoal Reflective 152cm wide Visible Light Transmitted 10% Glare Reduction 84% Total Solar Energy Rejected 61% Infra-Red Rejected 70% Ultraviolet Radiation Rejected 99%

SX- CH2560 - Charcoal Reflective 152cm wide Visible Light Transmitted 25% Glare Reduction 63% Total Solar Energy Rejected 54% Infra-Red Rejected 51% Ultraviolet Radiation Rejected 99%

SX- CH3560 - Charcoal Reflective 152cm wide Visible Light Transmitted 35% Glare Reduction 63% Total Solar Energy Rejected 54% Infra-Red Rejected 51% Ultraviolet Radiation Rejected 99%

SX- GR1060 - Grey Reflective 152cm wide Visible Light Transmitted 10% Glare Reduction 95% Total Solar Energy Rejected 68% Infra-Red Rejected 50% Ultraviolet Radiation Rejected 99%

BRZ-3560 - Bronze Reflective 152cm wide Visible Light Transmitted 38% Glare Reduction 59% Total Solar Energy Rejected 64% Infra-Red Rejected 37.1% Ultraviolet Radiation Rejected 99%

GOLD/SILVER - Reflective 152cm wide Visible Light Transmitted 15% Glare Reduction 83% Total Solar Energy Rejected 77% Infra-Red Rejected 77% Ultraviolet Radiation Rejected 99%

BRZ-1560 – Bronze 152cm wide Visible Light Transmitted 15% Glare Reduction 75% Total Solar Energy Rejected 69% Infra-Red Rejected 49% Ultraviolet Radiation Rejected 99%

BRZ-3560 Bronze Reflective 152cm wide Visible Light Transmitted 38% Glare Reduction 59% Total Solar Energy Rejected 64% Infra-Red Rejected 55% Ultraviolet Radiation Rejected 99%

Ultrablock 1560 – Silver Reflective 152cm wide Visible Light Transmitted 15% Glare Reduction 84% Total Solar Energy Rejected 58% Infra-Red Rejected 58% Ultraviolet Radiation Rejected 99%

Ultrablock 3560 – Silver Reflective 152cm wide Visible Light Transmitted 35% Glare Reduction 64% Total Solar Energy Rejected 65% Infra-Red Rejected 84% Ultraviolet Radiation Rejected 99%

Ultrablock 6060 – Silver Reflective 152cm wide Visible Light Transmitted 60% Glare Reduction 34% Total Solar Energy Rejected 43% Infra-Red Rejected 65% Ultraviolet Radiation Rejected 99%

SXNC- 3560 Non-Reflective Nano-Ceramic 152cm wide Visible Light Transmitted 32% Glare Reduction 63% Total Solar Energy Rejected 71% Infra-Red Rejected 73% Ultraviolet Radiation Rejected 99%

SXNC-8060 Non-Reflective Nano-Ceramic 152cm wide Visible Light Transmitted 80% Glare Reduction 21% Total Solar Energy Rejected 51% Infra-Red Rejected 72% Ultraviolet Radiation Rejected 99%

SX- TI2060 - Titanium Reflective 152cm wide Visible Light Transmitted 20% Glare Reduction 84% Total Solar Energy Rejected 58% Infra-Red Rejected 58% Ultraviolet Radiation Rejected 99%

SX- NUT2560 - Neutral Reflective 152cm wide Visible Light Transmitted 25% Glare Reduction 75% Total Solar Energy Rejected 54% Infra-Red Rejected 48% Ultraviolet Radiation Rejected 99%

SXHP- SP1060 - Reflective Sputter 152cm wide Visible Light Transmitted 10% Glare Reduction 79% Total Solar Energy Rejected 60% Infra-Red Rejected 79% Ultraviolet Radiation Rejected 99%

SX- SPSM-1060 - Reflective Sputter 152cm wide Visible Light Transmitted 10% Glare Reduction 79% Total Solar Energy Rejected 62% Infra-Red Rejected 77% Ultraviolet Radiation Rejected 99%

SX- SPCH1060 - Sputter Reflective 152cm wide Visible Light Transmitted 10% Glare Reduction 85% Total Solar Energy Rejected 76% Infra-Red Rejected 7% Ultraviolet Radiation Rejected 99%

SX- SM2060 - Reflective Smoke 152cm wide Visible Light Transmitted 10% Glare Reduction 77% Total Solar Energy Rejected 55% Infra-Red Rejected 49% Ultraviolet Radiation Rejected 99%

These films allow little or no light through.

SXWF-WO White Out 152cm wide Film Thickness 2 mil Visible Light Transmitted 7% Ultraviolet Radiation Rejected 100% Total Solar Energy Absorbed 31% Shading Coefficient 0.41 Reflectance 15% Total Solar Energy Rejected 46%

SXWF-BO Black Out 152cm wide Note: This film is not recommended for installation onto double insulated glass units that are exposed to direct sunlight. Glass breakage may occur due to heat absorption! 2.03 Solar Properties: Film Thickness 2 mil Visible Light Transmitted .05% Ultraviolet Radiation Rejected 100% Infra Red Rejected 97% Total Solar Energy Absorbed 60% Shading Coefficient 0.19 Reflectance 40% Total Solar Energy Rejected 83%

Iridescent Dichroic Polyester film. Special effects film excellent for backlit applications. This film changes colors as you pass by. No dyes or metals are in the construction this film. Screatch Resistant coating on surface.

SXD-4200 DichroSquares 92cm wide

SXD-4220 DichroGeo 92cm wide

SXD-4240 DichroStones 92cm wide

SXD-4250 DichroFrost 92cm wide

SXWF Sunset 139cm wide

BASIC INSTALLATION KIT The basic kit is perfect for a quick installation. Includes quality knife, installation squeegee, and a convenient measuring tape.

COMPLETE INSTALLATION KIT The complete kits come with all of the essential window film tools needed for installation. Includes a specially formulated and pre-measured mounting solution, installation squeegee, measuring tape, quality knife and scraper blade.

SimGlas WINDOW FILM CLEANER & POLISH- 250ml Pump Bottle Designed for: All window films and Automotive Tint Glare resistant glass or plastic UV filtering window film or plastic Vinyl Graphic films Windows and Mirrors

Non-toxic & Safe for use on: Aquariums and Habitats Plexiglas®, Acrylic, Perspex and Lexan® Food storage bins Stainless steel kitchen appliances Granite counter tops Hard shiny surfaces Paint and Acrylic surfaces GPS Navigation screens Mobile DVD entertainment Smartphones and Tablet Devices Eyeware & Windshields Bright metal, stainless steel Tinted Windows and soft vinyl windows Cleans, Protects & Beautifies! Non-Toxic! Alcohol & Ammonia Free! Made in the USA

SOLYX® Decorative Window Film Installation Instructions Tools: Scissors, Tape Measure, Razor Knife, Ruler, Plastic Card Squeegee, Spray Bottle, and Paper Towel. Clean the areas to which the film is to be applied, removing all traces of dirt, grime, grease, etc. Carefully measure the height and width of the glass surface. Oversize the film up to 3/4" extra material on each side of the film and cut the film to this size. Create your own wetting solution by adding 8 drops (a one second short squeeze) of very mild detergent (baby shampoo or dish detergent like "Joy" (NOT HAND SOAP!) into a 32oz. spray bottle filled with water. Lay the cut to size decorative film on a clean flat surface with the release liner up, or have someone hold the piece to be applied for you. Remove the release liner and spray the now exposed adhesive surface thoroughly with the wetting solution. Apply a generous amount of the wetting solution to the glass. The wetting solution prevents the film from sticking to the surface immediately, thereby allowing you more time in which to properly position the film. Place the now wet film onto the clean glass surface. Wet the face of the film to be squeegeed. Use the plastic card squeegee and squeegee from the center out towards the edges to remove any air bubbles and wetting solution. Double check that the film is flat and smooth with no remaining air bubbles and water . If any bubbles are not removed after Step 4, then squeegee them out towards the closest edge. Trim the excess film from the edges of the surface. It is ideal to cut in one continuous movement, using the ruler and razor knife. Use the paper towels for cleaning the glass surface and for the absorption of excess wetting solution around the edges. The film may take a few days to dry in order for it to completely adhere to the glass surface. Additional Installation Tips: Check the glass to make sure the surface is smooth. Spray the glass with soapy water and use a single edge razor blade to shave the surface. There should be no "clicking" sounds from the glass as the blade passes across the surface. Make sure the water is clean and use a new spray bottle. Do not use well water. Do not use hand soap. The glass must be sprayed and squeegeed clean and not wiped. Fingers should be dipped in water and rinsed before handling the film after the liner is removed. The surrounding area should be clean with no fans or wind blowing. A good squeegee is needed to squeegee all the water from behind the film. Good squeegees and installation tools can be gotten from www.filmhandler.com Precautions: The surface to which the film will be applied should be very clean, free of dirt, dust particles and silicone. Make sure there are no dry spots on the film prior to placing it onto the glass. Take care that when removing the release liner the film does not roll over onto itself. It will stick together and is difficult to pull apart. Wet the film as the liner is removed! Tip to remove liner: To separate the liner from the film take two pieces of scotch tape and stick them opposite each other at one corner…then pull these two pieces of tape apart and the liner will separate from the film. The adhesive surface will now be exposed. Wet this adhesive surface. Do not let the film fall upon itself as it will stick if not wet and it will be hard to separate! Seaming Films: For windows that are wider than the available width of SOLYX films, Industry standards allow for seaming. Standard Installation for seaming is a butt-join type seam. The films are overlapped and cut through with a sharp blade using a straight edge. The excess films are removed. A slight light line may appear. This is normally the width of the blade point. This is acceptable. Maintenance - Cleaning and Care: SOLYX Decorative Window Films are virtually maintenance free. No special care is necessary. Normal cleaning with a mild window cleaner is ideal. (Windex, Glass Plus, Ammonia and water are all fine with a clean soft paper towel or squeegee). It is not recommended that anything abrasive be used. The frequency of cleaning will not affect the film in any way.