- place your order quickly and easily online

1 Thanks to Orthomove insoles hiking is possible again for me with no knee pains anymore - i can feel that the joints are protected. Thanks to the s...
Author: Elijah Oliver
18 downloads 0 Views 6MB Size
1

Thanks to Orthomove insoles hiking is possible again for me with no knee pains anymore - i can feel that the joints are protected. Thanks to the secure support inside the shoes it even makes more fun.

skiing with Orthomove insoles has completely changed: my feet are no longer falling asleep and the boot’s edges do not press anymore. all in all, i feel safe inside my boots. Claudia, 28

Anita, 37

since i am running with Orthomove insoles i can cover even more kilometres. me and my joints as well are able to stand the pace much longer!

basically my touring ski boots fit quite good, but actually with the new Orthomove insoles their fit is much better and ensures more power!!!

Werner, 42

Roland, 24

every step fits on the route to success. Markus Reifinger, 54 world champion race walker

Orthomove - a system with know-how The insole as a link between the foot and the floor

04 05

Multifit System - Insoles Product Concept and Overview Individual Products of the Multifit System

06 10

Multiform System - Insoles Product Concept and Overview Individual Products of the Multiform System

24 26

Multiform System - Protection Product Concept and Overview Individual Products of the Multiform Protectionv System

42 44

Complete Orthomove Product Overview

47

Table of sizes and explanation of symbols

50

Overview Equipment - Analysis- und Adjuststations

52

www.orthomove.net - place your order quickly and easily online

3

Stabilising Increased lateral stability - not only in the ankle joint - sets the entire body upright and prevents incorrect postures and signs of wear and tear. Comfort Ideal wearing comfort is ensured by uniform distribution of pressure of the contour that can be adapted uniquely.

The Orthomove inlay system accord the highest priority to the ergonomics of the human body and its individuality! Backed by decades of experience, orthopaedics has optimised the Orthomove insoles for the well-being of the feet and has tested the products continually together with sportspersons, medical professionals and technicians. Orthomove has developed two complete inlay systems in order to cover the needs perfectly. The MultiFit system is a modular inlay system with individually replaceable elements – „ready to use“ for the wearer. With the MultiForm system, the foot takes on the shape for each specific sole and can thus be adapted 100% to the needs of the wearer. The application-specific model constructions of both systems ensure that the wearer has pleasant wearing comfort for supporting the activities. With the inlay systems prevalent in the market, the perfect fit suffers since 3 to 4 times the number of sizes is offered by exaggerated size optimisation. Based on the ideal proportion between the forefoot and the rear foot, the Orthomove inlay models are available in double sizes in order to achieve a particularly high level of perfect fit. Orthomove - the qualitatively valuable way for your feet!

Shoes are manufactured in accordance with standard sizes. However, the human foot is unique and hence, is not subject to any standards, since the length, width and the shape of the foot arch are different for each human being. For a long time, inlays were perceived to be an orthopaedic aid that is used primarily to alleviate various foot-related diseases. Today, the insole that can be fitted uniquely is perceived as an upgrade for your shoe. The sole as a perfect link between the foot and the shoe brings numerous benefits for the wearer so that he or she can feel fit and fine.

Intelligent shock absorptions The natural tissue pads of the heel are held under the heel bone by the bowl-shaped construction of the heel and it serves as the body‘s own shock absorber. Poron®Xrd™ high-tech shock-absorbing elements have been crafted into the highly stressed regions of the inlay as supplementary shock absorption. Any shocks that occur can be avoided to a large extent with the help of these without weakening the foot. Supporting the natural rolling movement The natural rolling movement of the foot is supported by the construction of the anatomy. Performance-enhancing All these functions prevent overload and appearances of weakness or fatigue of the foot – optimal conditions for the best performance

5

Generally, soles are available in the market symmetrically - pairwise, but the feet of the wearer are not identical under any circumstances. As the only product of its kind in the market, the Orthomove MultiFit system also permits separate adjustment of the right and left feet, and in this manner, ensures a high level of perfect fit and customer satisfaction. In the case of the Orthomove MultiFit system, special attention has been paid to dealer-friendly and customer-friendly handling. Thanks to the innovative modular system that makes separate models for supination, neutral and pronation superfluous, the warehouse stocks or inventory required is reduced up to one third. As a result, maintaining inventory levels become decisively reduced and easier for the dealer locally. The integrated shock-absorbing parts included in the scope of supply have been provided with an innovative micro-Velcro system and makes any tool superfluous. As a result, replacement becomes child‘s play and makes the final sale almost self-explanatory.

control - full shape It gives a solid grip and ensures perfect transmission of force. It prevents weakness and fatigue of the foot arising from overload and conserves the joints and ligaments.

recommended for all types of sports requiring a large amounts of force that are applied in moulded shoes or extremely strong shoes such as, for example cross-country, ski, bike, skate... In everyday use, this sole design is recommended for those who work for a long time while standing or are exposed to high levels of physical strain. It is also available as an ultra-thin model, for fashionable shoes such as sneakers and gallantry shoes.

dynamic - v-shape

basic half-mould

This improves the lateral stabilisation and still provides the freedom of movement required in the region of the midfoot.

The flexible allround sole that ensures comfort and lateral stability.

recommended for

minor supporting feature for almost all types of sports and in everyday use to enhance wearing comfort with limited capability for adaptation and withstanding strain.

all dynamic types of sports with light-weight footwear such as, for example, running. In everyday use, this sole design is recommended for those who are on the move without standing for long intervals. It is also available as an ultra-thin model, for fashionable shoes such as sneakers and gallantry shoes.

recommended for

Multifit System

The MULTIFIT system is a modular insole system that consists of elements that can be replaced individually. With the help of the support heels (+4 mm and +7 mm) the insole can be adapted individually to the respective type of foot (longitudinal arch) of the wearer. Two additional and replaceable shock-absorbing elements enable customised shock absorption and pressure distribution on the regions of the foot that are exposed to greater stress. Based on the stress caused by the weight as well as unique demands on comfort by the wearer, these may be replaced on request.

7

for customised adjustment of the height to the natural arch of the foot A thermal plate or the foot scan station provides information about the condition of the foot – whether it is high-arched, normal or flat.

The module system includes two different shock-absorbing elements that are used depending on the load weight or according to comfort feeling.

Based on this classification, the inlay is completed with 7 mm, 4 mm or no wedge at all. ATTENTION: For shoes with a narrow cut or for Strobel soles - the heel here is one size smaller since the construction of the shoe on its own has a supporting effect.

+4mm

solid

up to 60 kg

beyond 60 kg

4 - 7 mm

high-arched foot

normal foot

flat foot

raised, slanting outwards, tending towards supination

natural and optimal shape with good pressure distribution

lowered, slanting inwards, tending towards pronation

Multifit System

0 - 4 mm

soft

Strobel sole is provided in highly undercut shoes - primarily in sports shoes such as, for example, those for running and hiking; the characteristics is a very tapered insole. Take a heel one size smaller - for a flat foot only more +4 mm.

thermoprint scheibe

item no. 50 9094 001

thermoprint station

item no. 50 9094 202

scanner station

item no. 50 9093 211

9

Individually replaceable elements and pads in combination with application-specific model constructions yield the Orthomove Multifit system - a complete inlay system that ensures perfect fit for the wearer with comfortable wearing characteristics.

NORDIC WALKING

MOVING ACTIVITY

GOLF

BUSINESS

BIKE

LEISURE

TENNIS

ULTRA-THIN

FOOTBALL

SWEAT MANAGEMENT

INLINE- / ICE SKATING

ANTIBACTERIAL

SKI

RUNNING

SKI TOURING

HIKING/MOUNTAINEERING

CROSS-COUNTRY

[ BASIC ]

ortho move

item no. 60 0000 101 for leisure and everyday use as well as light sports activities + anatomically shaped soft construction + promotes ideal conditions for the foot for active exercises + outer material: jersey

TREKKING

Multifit System [ BASIC ]

STANDING ACTIVITY

Recommended for:

11

airflow

item no. 61 1000 101 for leisure and everyday use as well as light sports activities + anatomically shaped soft construction + 100% air-permeable and breathable with unique perforation + promotes ideal conditions for the foot for active exercises + outer material: jersey + shock absorption for the heel and joint support can be adjusted separately

Recommended for:

[ ALLROUND ]

universal

item no. 61 2000 201 for leisure and everyday use as well as light sports activities + anatomically shaped soft construction + air-permeable mesh gives a good grip with comfortable conditions for the foot + outer material: mesh + shock absorption for the heel and joint support can be adjusted separately

Multifit System [ ALLROUND ]

[ ALLROUND ]

Recommended for:

13

[ SLIMLINE ]

item no. 62 2000 501 slimline-insole for maximum comfort + extremely thin construction, ideal for slim sports and business shoes + additional anatomically shaped v-type frame joint stabilisation permits torsional movements + outer material: leather + shock absorption for the heel and joint support can be adjusted separately

item no. 62 2000 101 slimline-insole for maximum comfort + extremely thin construction, ideal for slim sports and business shoes + additional anatomically shaped v-type frame joint stabilisation permits torsional movements + outer material: jersey + shock absorption for the heel and joint support can be adjusted separately

hidden

Recommended for:

ultrathin

Multifit System [ SLIMLINE ]

[ SLIMLINE ]

Recommended for:

15

[ DYNAMIC ]

ultrathin carbon silver

item no. 63 1000 401 slimline-high-tech insole + robust construction gives optimal stability + additional anatomically shaped full-frame joint stabilisation facilitates maximum force transmission and enhances the performance + gives a good grip and ensures controlled rolling behaviour + carbon style + outer material: silvertech, antibacterial as a result of pure silver threads + shock absorption for the heel and joint support can be adjusted separately Recommended for:

fit for work silver

item no. 64 5000 401

dynamic-high-tech insole for working shoes + dynamic construction ensures stability and maximum possible freedom of movement + additional anatomically shaped v-type frame joint stabilisation permits torsional movements + higher back foot shell provides excellent lateral stability + reduced undertread in the area of the protective toe cap + outer material: silvertech, antibacterial as a result of pure silver threads + electrical conductivity: cover + glue + eva parts + shock absorption for the heel and balls, and joint support can be adjusted separately attention: it is strictly forbidden to use om fit for work in working shoes if the height of the toe area is thicker than of the original insoles.

Multifit System [ DYNAMIC ]

[ SLIMLINE ]

Recommended for:

17

[ DYNAMIC ]

item no. 64 1000 501 dynamic-insole for business and leisure + dynamic construction for stability and for freedom of movement + additionally anatomical shaped v-type frame joint stabilisation permits torsional movements + higher back foot shell provides excellent lateral stability + outer material: leather + shock absorption for the heel and balls and the joint support can be adjusted separately

item no. 64 2000 301 dynamic-insole for sports and leisure activities + dynamic construction for stability and for freedom of movement + additional anatomically shaped v-type frame joint stabilisation permits torsional movements + higher back foot shell provides excellent lateral stability + outer material: resistant microfiber for a good grip + shock absorption for the heel and balls and the joint support can be adjusted separately

natural Recommended for:

motion

Multifit System [ DYNAMIC ]

[ DYNAMIC ]

Recommended for:

19

running

[ DYNAMIC ] item no. 64 2000 201

dynamic-insole guarantees more power and stability + dynamic construction ensures stability and maximum possible freedom of movement + additional anatomically shaped v-type frame joint stabilisation permits torsional movements + higher back foot shell provides excellent lateral stability + air-permeable mesh gives a good grip with comfortable conditions for the foot + outer material: mesh + shock absorption for the heel and balls, and joint support can be adjusted separately Recommended for:

hiking

item no. 64 2000 311 dynamic-insole for all outdoor activities + dynamic construction ensures stability and best freedom of movement + 100% air-permeable and breathable with unique perforation + additional anatomically shaped v-type frame joint stabilisation permits torsional movements + higher back foot shell provides excellent lateral stability + outer material: resistant microfiber for a good grip + shock absorption for the heel and balls and the joint support can be adjusted separately

Multifit System [ DYNAMIC ]

[ DYNAMIC ]

Recommended for:

21

ski silver

[ CONTROL ]

item no. 65 1000 401

control-insole for skiing / touring / skating + robust construction enables optimal stability + additional anatomically shaped full-frame joint stabilisation + enables maximum transmission of force and provides good grip and control + enhances the performance and has a stabilising effect + higher back foot shell provides excellent lateral stability + outer material: silvertech, antibacterial as a result of pure silver threads + shock absorption for the heel and balls, and joint support can be adjusted separately Recommended for:

carbon silver

item no. 65 2000 401 control-high-tech insole + robust construction enables optimal stability + additional anatomically shaped and highly robust full-frame facilitates maximum force transmission + enhances the performance, has a stabilising effect and provides excellent control + higher back foot shell provides excellent lateral stability + carbon style + outer material: silvertech, antibacterial as a result of pure silver threads + shock absorption for the heel and balls, and joint support can be adjusted separately Recommended for:

Multifit System [ CONTROL ]

[ CONTROL ]

23

Several constructions are available in the existing market with the same consistent strength and thickness all through. Since the human foot is highly unique and complex in order to place it simply on a hard or solid shaped plate, such systems are neither meaningful nor expedient. Pure stiffening of the foot has the same effect as a plaster cast: conservation, pain alleviation, and as a consequence of this, reduction in the muscular system, shutdown of the sensor system and as a result, even loss of stability and performance. The basis for the Orthomove MultiForm inlay system is formed by a high-tech plastic that can be moulded thermally and which, when arranged in multiple anatomic construction levels facilitates the best possible support and relief of the natural flow of movement. Different strengths and thicknesses of the material ensure, on the one hand, that the foot receives support where this is also actually required. On the other hand, so-called flex zones are achieved to relieve the foot of the wearer or to guide them gently, as well as to give adequate free space to the existing bones and muscles. In this manner, it is ensured that the sensor system is not impaired or barely so, since this is critically responsible for the stability, performance and the well-being. This type of inlay is rounded off by the use of appropriate covering materials as well as partially high-tech shock absorbers made of PORON®-XRD™, and these can also be kept extremely thin with the help of precise moulding.

Flat sole design can be shaped 100% to the foot. The foot is used here as the mould to support it optimally.

heater

item no. 50 9091 001

vac 3d fit

item no. 50 9092 001

Multiform System

The foot is the shape for the customised sole - 100% adapted to the type of the foot and the purpose of use. This is so because with the Orthomove MultiForm system, the shape is formed by direct thermal adaptation to the foot of the wearer. These are inlay constructions that are shaped most accurately to the foot of the wearer and can be customised 100% to his or her needs. The reason for this is that this system has been created from development with the help of continuous cooperation with medical professionals, sportspersons and orthopaedics.

The pre-moulded foot bed with the performance -enhancing properties of the 3-D fit system fits most shapes of the foot. This is a special adaptation to your own foot simply by heating and shaping.

With the help of this construction it has been possible to achieve stability and maximum pressure distribution and this, too, with an extremely thin base construction with low weight. You can feel the difference!

25

The Multiform system is characterised by customised adaptation of the insoles. With the help of the Multi-vac system, pre-shaped or still flat soles are adapted thermally and facilitate a perfect and customised fit. The soles are provided with high-tech shock absorption feature, consisting of the Poron®Xrd™ material and provide the best performance and stability. NORDIC WALKING

MOVING ACTIVITY

GOLF

BUSINESS

BIKE

LEISURE

TENNIS

ULTRA-THIN

FOOTBALL

SWEAT MANAGEMENT

INLINE- / ICE SKATING

ANTIBACTERIAL

SKI

RUNNING

SKI TOURING

HIKING/MOUNTAINEERING

CROSS-COUNTRY

TREKKING

[ BASIC 3D ]

ski rent 3D

item no. 66 4320 104

3d-insole, 100% handmade in austria + pre-shaped insole using multiform 3d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + very thin in the heel region + outer material: jersey

Multiform System [ BASIC 3D ]

STANDING ACTIVITY

Recommended for:

27

allround 3D

[ SLIMLINE 3D ] item no. 66 4320 114

3d-insole, 100% handmade in austria + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + very thin in the heel region + outer material: jersey Recommended for:

inkognito 3D

item no. 67 4311 504

slimline-3d-insole for business and leisure, 100% handmade in austria + slim-fit shaped for tight business- and leisure shoes with extremely low space requirement + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: leather + high-tech xrd shock absorption for the heel

Multiform System [ SLIMLINE 3D ]

[ ALLROUND 3D ]

Recommended for:

29

+pro

also available as flat insole

+pro

[ SLIMLINE 3D ]

triathlon 3D

item no. 67 4311 204 slimline-3d-insole for active sports and running activities, 100% handmade in austria + slim-fit shaped for tight sports- and leisure shoes with extremely low space requirement + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + air-permeable mesh gives a good grip with comfortable conditions for the foot + outer material: jacquard mesh + high-tech xrd shock absorption for the heel Recommended for:

[ SLIMLINE 3D ]

bike silver 3D

item no. 67 4612 404 slimline-3d-insole for cycling and mountain biking, 100% handmade in austria + slim-fit shaped for tight cycling shoes with extremely low space requirement + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: silvertech, antibacterial as a result of pure silver threads + high-tech xrd shock absorption for the heel

Multiform System [ SLIMLINE 3D ]

also available as flat insole

Recommended for:

31

trekking 3D

item no. 68 4311 304 dynamic-3d-insole for activities in sports and leisure, 100% handmade in austria + specially shaped for sports- and outdoor activities + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: resistant microfiber for a good grip + high-tech xrd shock absorption for the heel

Recommended for:

[ DYNAMIC 3D ]

marathon 3D

item no. 68 4311 204

dynamic-3d-insole, for active sports and running activities, 100% handmade in austria + specially shaped for sports- and running shoes + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + air-permeable mesh gives a good grip with comfortable conditions for the foot + outer material: mesh + high-tech xrd shock absorption for the heel Recommended for:

Multiform System [ DYNAMIC 3D ]

[ DYNAMIC 3D ]

33

[ DYNAMIC 3D ]

allsports 3D pro

item no. 68 4311 103 dynamic-3d-insole for sports and leisure activities, 100% handmade in austria + specially shaped for many shoes and sports activities + flat insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: jersey + high-tech xrd shock absorption for the heel

Recommended for:

[ DYNAMIC 3D ]

golf silver 3D

item no. 68 4311 404

dynamic-3d-insole for sports and leisure activities, 100% handmade in austria + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: silvertech, antibacterial as a result of pure silver threads + high-tech xrd shock absorption for the heel

Multiform System [ DYNAMIC 3D ]

available as + also pre-shaped insole

Recommended for:

35

+pro

[ CONTROL 3D ]

light air 3D pro

item no. 69 4311 203 control-3d-insole for sports and leisure activities, 100% handmade in austria + more stability as a result of a wider shape for a higher shell + flat insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + air-permeable mesh gives a good grip with comfortable conditions for the foot + outer material: jacquard mesh + high-tech xrd shock absorption for the heel Recommended for:

[ CONTROL 3D ]

ski athlete 3D

item no. 69 4620 304 control-3d-insole for skiing and touring, 100% handmade in austria + highly robust construction for stringent requirements of force transmission and control + pre-shaped insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: resistant microfiber for a good grip + high-tech xrd shock absorption for the heel Recommended for:

Multiform System [ CONTROL 3D ]

also available as flat insole

37

available as + also pre-shaped insole

ski race 3D pro

[ CONTROL 3D ] item no. 69 3622 003

control-3d-insole for skiing, 100% handmade in austria + specially for forming inliners as a result of a very stiff toe area + highly robust construction for stringent requirements of force transmission and control + flat insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: slip stop eva + high-tech xrd shock absorption for the heel Recommended for:

carbon speed silver 3D pro

control-3d-high-tech insole, 100% handmade in austria + highly robust carbon construction for stringent requirements of force transmission and control + flat insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: silvertech, antibacterial as a result of pure silver threads + high-tech xrd shock absorption for the heel Recommended for:

item no. 68 4311 403

Multiform System [ CONTROL 3D ]

[ CONTROL 3D ]

39

ski & skate 3D pro

item no. 69 3620 003 control-3d-insole for skiing / touring / skating, 100% handmade in austria + highly robust construction for stringent requirements of force transmission and control + flat insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + outer material: slip stop eva + high-tech xrd shock absorption for the heel

Recommended for:

[ CONTROL 3D ]

heat 3D pro

item no. 69 4312 103 control-3d-insole for skiing and touring, 100% handmade in austria + lenz heating element provides high quality conditions for the foot, adjustable via lenz-app + highly robust construction for stringent requirements of force transmission and control + flat insole using multiform 3-d technology + simple and quick thermal adaptation with the help of the vac 3d system + moulding temperature at approx. 120° + cover material: jersey + high-tech xrd shock absorption for the heel

Multiform System [ CONTROL 3D ]

[ CONTROL 3D ]

Recommended for:

41

The flexible and thermoplastic mouldable high-tech plastic, together with the shock-absorbing material PORON®-XRD™ provides the best standard in impact protection technology. The Orthomove MultiForm protectors provide reliable and permanent protection against severe impact, have a very long life and are wear-resistant, thin, light-weight, flexible and, moreover, antibacterial. Air ducts serve to absorb moisture for additional wearing comfort. The protectors - worn directly on the skin or even between the socks and shoes - provide pressure distribution and strong shock-absorption of the forces arising and prevent pressure points.

The flat pads for the shinbone or for the instep, Achilles heel and ankle region can be cut to size separately.

Multiform System - Protection

The pre-shaped pads for the shinbone can be adapted to the contour of the shinbone edge thermally at a temperature of 120 degrees and ensures 100% pressure distribution as a result.

43

Item no. 50 4000 002 Protectors made of the high-tech material PORON®-XRD™ with textile surface The protectors can be placed directly on the skin of the shinbone edge, or even between the socks and the shoes. The height may be selected as required. The protectors distribute the pressure and provide strong shock absorption of the forces that occur. This prevents pressure points to a large extent. They can be specifically cut to size. Outer material: Silver tech - antibacterial as a result of pure silver threads

[ FLAT FLEX PADS] Item no. 50 4000 401 Protectors made of the high-tech material PORON®-XRD™ with textile surface Pressure relief pads that can be used specifically for the instep, Achilles heel and ankle region, which may be placed directly on the skin or even between the socks and shoes. The pads distribute the pressure and provide strong shock absorption of the forces that occur. This prevents pressure points to a large extent. They can be specifically cut to size. Outer material: Silver tech - antibacterial as a result of pure silver threads

Multiform System [FLAT FLEX PADS]

[ FLAT FLEX PADS ]

45

[ PRE-SHAPED PADS] Item no. 50 4000 002

Item no. 50 4000 001 Protectors made of the high-tech material PORON®-XRD™ with a single-layer thermally mouldable surface. The protectors can be placed directly on the skin of the shinbone edge, or even between the socks and the shoes. The height may be selected as required. The pads distribute the pressure and provide strong shock absorption of the forces that occur. This prevents pressure points to the maximum possible extent. It can be shaped thermally at 120 degrees.

Protectors made of the high-tech material PORON®-XRD™ with a double-layer thermally mouldable surface. The protectors can be placed directly on the skin of the shinbone edge, or even between the socks and the shoes. The height may be selected as required. The pads distribute the pressure and provide strong shock absorption of the forces that occur. This prevents pressure points to the maximum possible extent. It is meant to be shaped thermally at 120 degrees.

Multiform System [PRE-SHAPED PADS]

[ PRE-SHAPED PADS ]

47

SLIMLINE ULTRATHIN CARBON SILVER

ULTRATHIN

HIDDEN

ALLROUN D UNIVERSAL

AIRFLOW

BASIC ORTHOMOVE

DYNAMIC HIKING

RUNNING

MOTION

NATURAL

FIT FOR WORK SILVER

CO NT RO L CARBON SILVER

SKI SILVER

BASIC 3D

ALLRO U ND 3 D

S LIM LI NE 3 D

ALLROUND 3D

INKOGNITO 3D

TRIATHLON 3D

TRIATHLON 3D PRO

MARATHON 3D

GOLF SILVER 3D

ALLSPORTS 3D

ALLSPORTS 3D PRO

LIGHTAIR 3D PRO

SKI ATHLETE 3D

SKI ATHLETE 3D PRO

SKI RACE 3D PRO

CARBON SPEED SILVER 3D

SKI&SKATE 3D PRO

HEAT 3D PRO

SKI RENT 3D

BIKE 3D

BIKE 3D PRO

DYNAMIC 3D TREKKING 3D

CO NT RO L 3 D CARBON SPEED SILVER 3D PRO

49

icons

sizes

A N A LY S I S THERMOPRINT PLATE

THERMOPRINT STATION

STANDING ACTIVITY

SCANNER STATION

MOVING ACTIVITY BUSINESS LEISURE ULTRA-THIN SWEAT MANAGEMENT ANTIBACTERIAL RUNNING HIKING/MOUNTAINEERING item no. 50 9094 001

item no. 50 9094 202

item no. 50 9093 211

TREKKING NORDIC WALKING

ADJUSTMENT HEATER

VAC 3D FIT

GOLF

FITTINGSTATION MINI

BIKE TENNIS FOOTBALL INLINE- / ICE SKATING SKI SKI TOURING item no. 50 9091 001

item no. 50 9092 001

item no. 50 9080 002

CROSS-COUNTRY

51

T E N . E V O M HO g

n T i r e R d r O O . & o W f n I W : e n W sily onli a e d n a quickly

ADOMUS GMBH steiffstrasse 1, 4710 grieskirchen austria Tel: +43 7248 64440 Fax: +43 7248 64440-15 Mail: [email protected]

Suggest Documents