DARMSTADT
Z A G R E B
s / - Computer Integrated Manufacturing and High Speed Machining
4th International Conference on Production Engineering
Edited by R. Cebalo
Opatija, 12-13 June, 1997
Opatija, 1997. 4 International Conference on Production Engineering
CIM'97
Contents Plenary Session-KEYNOTEPAPERS
j Page:
Schulz H.
GegenwartigerStand und weitere Entwicklungen der Hochgeschwindigkeitsbearbeitung
1
Povrzanovic A.
Considerations about CIM in production technologies in today's Croatian economy
9
Schmitt Tli.
High speed milling machines
17
Dusman F.
International ISO 9000 standards, ten years later
27
Taborsak D., Arbeits-undBetriebs Organisation von der Antike biszum 21. Sakic N. Jahrhunderl Cebalo R., Scluilz H., With high speed machining towards 21" century Udiljak T.
41 61
A - TECHNOLOGIES IN CIM Aracic S., Krumes D., Vitez I.
Contribution to the study ofboronized steel materials under erosion
A- 1
Cosic P.
Using genetic algorithm of ultra Oiinfoil contact rolling optimizing-expectations and possibilities
A -11
Grizelj B.
Anwendung der FEM beim Stauchen
A - 21
Grozdanic V.
Mathematical models of fusion of steel scrap in the melt
A - 33
Grum J., Fefer D., 2erovnik P., Pecnik B. GrumJ.,SturmR., Zerovnik P. Ivusic V., Orsanic 1., Schauperl Z. Jurkovic M., Hriesik A., Jurkovic Z.
Characterisation on low-carbon steel after cold deformation based on barkahausen noise
A - 39
Residual stresses after laser surface remelting of gray and nodular iron Cavitation erosion - an example
A - 49
Mathematical and experimental modelling of deep drawing process
A - 57 A - 63
Opatija, 1997. 4 International Conference on Production Engineering
CIM
97
Matejicek F., Grizelj B. Die Analyse der Deformationen runder Flatten mittels finite Elemente Methode unter Beriicksichtigung des Einflusses der wahren eigenschaften des Werkstojfes
A - 71
Math M., Jerbic B., Mahovic S.
Computer aided modelling of the bending tools for robotics assembly by finite element method
A - 81
Misina N.
Influence of heat treatment to the properties of weldedjoint of dissimilar steels
A - 89
Polajnar I., Kralj V
Resistance welding ofworkpieces differing considerably in their A - 99 thickness
Reskovic S., Vodopivec F., Mamuzic I.
Precipitation of Niobium in thefinalhigh-temperature thermomechanical treatment
Rudolf R.,RriSman A.
The microstructure analysis ofAlSi7-SiC composites made by thixocasting process
A- 107
A- 119
Samardzic I., Stoic A.
Tlireedimensional temperaturefielddistribution during welding A- 129
Vrzal-Grgic Lj., Budic I.
QualitaetderAbguessebeimEingiessen aufden mechanisierten Niederdruckformenlinien
Zupanic F., Lobnik B., Microstructure characterisation and some mechanical BoncinaT., properties of UtopMol (W.Nr.1.2343) hot work tool steel Krizman A.
A-141 A- 147
B - CUTTING AND HIGHSPEED MACHINING
Cebalo R., Stoic A., Skoric S
Optimization of parameters ofsperfinishing
B- 1
Cebalo R., Skoric S. Stoic A.
Mathematical modelling cuttingforces by the second order response surface
B -13
Cebalo R., Udiljak T.
Tlie influence of tool wear on machinability parameters
B - 21
Chladil J., Kovar L.
Application of PCfor cutting condition optimization
B - 29
Cukor G.
Tool life modelsfor advanced machining systems
B - 35
Ekinovic S., Brdarevic S., Kovacevic M.
Tlie relationship between shear plane angle and workpiece material properties
B - 43
Opatija, 1997. 4 International Conference on Production Engineering
CIM'97
Goglia V., Beljo R.
Lateral movement of the band saw blade in relation to the cutting velocity
B - 51
GrumJ.
Influence of steel microstructure on machinability at turning
B - 59
Grum J.,Zuljan D.
Optimization of laser cutting with Oxygen as auxiliary gas
B - 69
Kalhofer E.
Tlie technology of high speed cutting
B - 77
Kuljanic E.
Machinability in new industrial conditions
B- 89
Miskovic A.
Tlie possibilities of accurate holes making in aeronautics
B - 97
Pavic A., Sutic Z.
Selection of cutting speed in broaching of gas turbine disc
B -105
Pogacnik M., Kopac J. Sestan A., Dundovic C., Hriesik A.
New approach to HSC turn-milling and its advantages
B -115
Influence of guiding part of reamer upon the geometry of the reamed bore
B - 123
UrbanekJ.,SkrdlaI.
Interactive characteristics of abrasive waterjet and a workpiece in erosion front
B-129
C- QUALITY ASSURANCE
Dusman F., Mudronja V., Bakula S. Fantoma S., Penso L., Pozzetto D
Conditions for achieving and keeping the high accuracy of the three-coordinate measuring machines
C -1
A methodology of productive maintenance in manufacturing industries
C-9
Meden G.
An approach to the industrial environment quality assurance
C - 21
Penso L , Piccin A., Pozzetto D.
Analysis and evaluation of the performance of a productive line subjected to improvement decisions
C - 29
Penso L., Pozzetto D.
Application of the total quality methodologies at a production line
C - 39
Perse D.
Monitoring (inspection) as increasing model of reliability of
C - 51
system in use Perse D.
Reliability of a closed vessel subjected to overpressure
C - 63
Samardzic I., Lukacevid Z., Maglic L. Sebastijanovic S.
"On-line" welding parameters monitoring in welded constructions quality assurance system
C - 73
Tlie degree of safety and reliability of reactor vessels
C - 81
Turcic D.
ISO 9000-satisfaction orfrustration ? Tlie choice is yours
C - 91
Opatija, 1997. 4 International Conference on Production Engineering
CIM'97
Brnic J
Structure members cross-sections optimization
D -1
Crnekovic M., Kirola M.
A path tracking control algorithm for autonomous mobile robot
D-9
Crnekovic M.
Robot application in manufacturing processes of the company Ericsson Nikola Tesla d.d.
D -17
GojaZ., SarlijaM.
Bedeutung der Vermessung von Bearbeitungskraften bei Hochgeschwiendigkeitsbearbeitungen zur Entwicklung von Hochgeschwiendigkeits-motorspindeln
D - 23
Pandilov Z., Dukovski V.
Optimizing the contouring accuracy ofCNC milling machine with the contisure system
D - 31
Schmitt Th., Bork B.
Entwicklung einer Lineardirektangetriebenen HSCFrdsmaschine fur den Werkzeug- und Formenbau
D - 41
VoUH.
Performance capabilities ofHSC spindle units with rolling bearings
D - 53
\E -LOGISTICS AND ORGANIZATION
Beni6 D.
Intelligent manufacturing-the excuse for using artificial intelligence techniques?
E-1
Bilic B., Bajid D.
Determing the optimalflowpart in the automated guided vehicles systems-review
E -13
Chladil J., Stepan L.
Manufacturing processes based on design data
E - 25
Dundovic C., Sestan A., Mmjavac E.
Development tendency of combined structures of port shore-based and mobile cranes and optimization of application
E - 31
Figuric M., Motik D.
A contribution to the development of the new production organization paradigm
E - 43
Grladinovic T., Jelacic D.
The development ofmanagementAnformation system in small wood processing companies
E - 49
Jurova M., Kumar S.
Integrated approach to logistics
E - 57
Opatija, 1997. 4 International Conference on Production Engineering
CIM197
Kljajin M.
Stiicklistenorganisation zur Rechnerunterstutzteverarbeitung
E - 65
Kumar S.
Contribution of manufacturing systems in waste reduction within the logistic chain
E - 75
LovricA.
Shift system
E-85
Lovric A.
Working-hours and work humanisation
E - 97
Lujic R., Simunovic G., Maticevic G. Majdandzic N., Saric T.
Tlie system of production planning in various information systems of production companies Rationalization of information systems in Croatian economy
E -105
Mrnjavac E., Komadina P., Dundovic C.
Yard gantry cranes in the optimization of the stacking area E - 123 technological process of the port container terminal
Ohiic £., Dukic G., Bosnar R. Oluic £., Stefanic N., Dukic G. Sebastijanovic S.
Analysis of working cycles in logistic processes
E -133
Importance and aims of material preparing in logistic processes Reconstruction of the plantfor production of basic oil distillate (BOD) under exclusion of vacuum pipe still (VPS)
E -143
Sebastijanovic S.
Tlie determination of process on the basis of exploitation data
E -161
Urbanek J., Krc P.
Production logistics on the structure of machine-tool production systems
E -169
Vezal.
Cooperation tlirough virtual factories with fractal structures
List of Authors
E - 113
E - 151
E-179
